Falken // Crl Pasovni Brusilnik nakup rabljenega (1.128)

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: Sandingmaster Model: SCSB3-1300 Pjdpfx Agoxwwkrjxjgk Leto: 1993

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Širina brušenja 1100 mm Min. ÷ maks. delovna višina 4÷170 mm Širina brusnega traku 1115/1370 mm Dolžina brusnega traku 2150 mm 2 hitrosti podajanja 4,5-9 m/min Podajalni motor 0,45/0,8 kW Psdpfexwwgyox Agxsgk Moč motorja za nastavitev mize 0,25 kW Moč motorja (KM) za enoglave ali dvoglave stroje 11 kW (15) 50 Hz Delovni tlak 6 bar

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Delovna širina: 1350 mm Največja debelina: 140 mm Tip: Spodnji Psdpfx Agsxwwhwexsgk Število enot: 2 Skupna instalirana moč: 2,2 kW Dolžina x širina x višina: 2700,0 × 3200,0 × 2400,0 Teža: 3500 kg

Stanje: dober (rabljeno), IMEAS COMBI 4-1900 sander equipped with: - 2 sanding heads with upper and lower rubber rollers - Year: 1987 - Total installed power: 333 kW Pgjdpfxsul T Ats Agxsk - 2x sets of 6 panel feed rollers - Brushing unit (1 upper brush and 1 lower brush) at the output - Infeed lifting table - Outfeed conveyor, panel turner and stacking system available

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt size: 420x1800 mm (please consult us for supply) MACHINE CONFIGURATION: - Roller table, underside belt processing Table height from floor: 90 cm Pgedpfox A Unxex Agxsk - Automatic workpiece detection by sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction change MACHINE FEATURES: - General power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeters for monitoring power consumption Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic roller tensioning, oscillation, and retraction - Pneumatic supply: 6 to 8 bars - Extraction, 2 lower outlets Ø150 mm Recommended airflow: 2200 m³/h Velocity: 20 m/s - CE marking, front/rear emergency stops, lockable isolator switch NOTE: For your satisfaction, we remind you that belts should be slackened when the machine is not in use and that any humidity, including dew point inside your premises during winter, should be avoided. Machine footprint: 1500x1300x2050 h.mm Weight: 1200 kg

Stanje: rabljeno, Širokopasovni kalibracijski brusilnik Pjdpfx Ajx N T Efegxogk Proizvajalec: Viet Spa Italia Model: PL ICCC Leto: 1995 Moč: 54 kW Zračni pritisk: 5–8 bar Teža: 6200 kg

Stanje: pripravljen za uporabo (rabljen), Znamka: Carstens Model: DR15/2 Št. stroja: 64913 Tehnični podatki Pjdexz Ea Njpfx Agxogk Širina brušenja: 1100 mm Premer odsesovalne cevi: 300 mm Motor: 22 kW, 50 Hz, 380 V, 3-fazni Transportne dimenzije: 150 x 170 x 220 cm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Opis izdelka Znamka: Costa Model: TRITT1350 Serijska številka: A60314LL1 Pjdev Hfdvjpfx Agxjgk Leto izdelave: 2006 Inventarna številka: 2002440BXA Tehnični podatki Delovna širina: 1350 mm Dimenzije brusnega traku: 1380x2620 mm Napajanje: 400 V, 50 Hz, 3-fazno, 51 kW, 101 A 1. brusna enota: 1 segmentirani brusni trak 2. brusna enota: 2 segmentirani brusni čevelj 3. brusna enota: 3 segmentirani brusni čevelj 4. čistilna krtača 5. peskanje 6. vakuum Motor: 51 kW Transportne mere: 320 x 240 x 265 cm (D x Š x V)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, številka stroja/vozila: AE700472 Ref: 111810, 1350 mm široki tračni brusilni stroj s 3 brusnimi valji, kalibrirni in brusilni stroj. V zelo dobrem stanju. Elektronska krmilna enota. Kapaciteta: 1350 mm širine. Zelo dobra moč motorja. Priloženih vsaj 5 zabojev brusnih trakov s tekstilno podlago, zrnatost 40/60 in 80. Cena: STG £15.000,00, vključuje nakladanje na prevoz kupca. Lokacija: Burrowbridge, Somerset TA7 0SG, Velika Britanija. Fotografije na voljo prek WhatsApp. Pgjdpot Iwgusfx Agxek

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: nefunkcionalno, številka stroja/vozila: TR206 10 1997, skupna širina: 1.100 mm, skupna višina: 150 mm, delovna širina: 1.100 mm, teža obdelovanca (maks.): 150 kg, moč: 27,77 kW (37,76 KM), vrsta nastavitve višine: električni, širina mize: 1.065 mm, obratovalni tlak: 6 letvica, Sandingmaster CSB2, širina 1100 mm, kalibrirni in fini brusilni stroj z valjem in padom. Oba valja trdote 80° Shore. Sandomatic nastavitveni sistem. Ampermetra na obeh motorjih. Podajalni motor z dvema hitrostma: 7 in 14 m/min. Dimenzije brusilnega traku: 1900 x 1130 mm. Na voljo uporabniški priročnik. Teža: cca 3500 kg. Priloženi brusilni trakovi zrnatosti 80, 100 in 120. Fotografije na WhatsAppu. Pgjdpfxex Hr Dho Agxek

Stanje: rabljeno, Širokopasovni brusilni stroj Proizvajalec: Heesemann Model: KSM1 Pgjdpfxswv Ta No Agxok Širina brušenja: 1.300 mm Debelina obdelovanca: 3–140 mm Hitrost podajanja: 4,5–22 m/min Dimenzije brusnega traku: 2.620 x 1.350 mm Naprava za krtačenje Premer krtačnega valja: 150 mm Pogonska moč: 1,5 kW Potreben prostor (D x Š): 1.850 x 2.470 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5202023, VIET 3-tračna tračna brusilka deluje odlično. Vsi ležaji v motorjih in valjih so bili zamenjani pred 12 meseci, tako da je stroj popolnoma obnovljen in ga je možno videti v delovanju – teče zelo gladko, brez ropota ali vibracij. Pri brušenju hrasta debeline 1,5 mm s trakom granulacije 40 deluje odlično, tretji trak z granulacijo 180 pa omogoča odlično končno obdelavo. Poleg brusilke dobite tudi več kot 200 brusnih trakov različnih granulacij (40, 80, 120, 150, 180) v skupni vrednosti 7000 evrov za ceno 3.000 evrov skupaj z brusilko. Pjdpfx Aextf Htjgxegk

Stanje: novo, Bending diameter – max. 36.0 mm steel Podpfx Agjxabntjxsgk Cutting thickness – max. 36.0 mm steel Motor speed: 1450 rpm Oil capacity: 32.0 l Motor: 380 Volt, 50 Hz Total power requirement: 5.5 kW Weight: 650 kg Dimensions (L x W x H): 1470 x 1200 x 1020 mm Demonstration machine – NEW (!!) Features: - Maximum performance, minimal energy consumption - Hydraulic combination machine for bending and cutting operations * Suitable for e.g. reinforcing steel or solid material - Bending mode with 3 different angle settings - Selectable manual and automatic modes - Simultaneous bending and cutting operations possible when the machine is running - “ECO mode”: Hydraulic pump operates only when the foot switch is activated - Free-moving foot switch - Instruction manual Technical data: - Steel 45 kg/mm²: Bending Ø 36.0 mm / Cutting Ø 36.0 mm * For 2 pieces: Steel 45 kg/mm²: Bending Ø 20.0 mm / Cutting Ø 24.0 mm - Steel 65 kg/mm²: Bending Ø 32.0 mm / Cutting Ø 32.0 mm * For 2 pieces: Steel 65 kg/mm²: Bending Ø 18.0 mm / Cutting Ø 20.0 mm - Steel 85 kg/mm²: Bending Ø 26.0 mm / Cutting Ø 28.0 mm * For 2 pieces: Steel 85 kg/mm²: Bending Ø 14.0 mm / Cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Širina pločevine 1050 mm Debelina pločevine 1,50 mm Širina otvora 100 mm Največji kot upogibanja 135 ° Višina zgornje orodje 100 mm Skupna potrebna moč ročna Teža stroja cca. 330 kg Potreben prostor cca. 1600 x 900 x 1450 mm Pgedpfsxaa T Uex Agxok Razstavni stroj iz leta 2023 Na zalogi le še 2 stroja Posebna cena na povpraševanje Oprema: - robusten, ročni ročni upogibni stroj - deljeno zgornje, spodnje in zadnje orodje * Višina zgornjega orodja = 100 mm * Razdelitev 100/100/100/100/100/100/100/70/60/50/40/30/100 * levo in desno s koničastim orodjem - zgornje orodje s sistemom za hitro menjavo - hitra nožna pritrditev - kotni omejevalnik – nastavljiv - ročni zadnji omejevalnik 500 mm - stroj je premičen (kolesa) - zaboja za pribor – zadaj *Slike prikazujejo enak stroj (UFA 1212)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Pressure: 100 t Stroke: 300 mm Table size: 1070 x 260 mm Clearance between uprights (between guides): 1070 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Oil capacity: 90.0 l Motor power: 5.5 kW Machine weight: approx. 1,500 kg Space requirement: approx. 2050 x 1000 x 2200 mm Exhibition machine from 2024 With only approx. 2 operating hours Condition: as NEW Special price on request Equipment: - Robust electro-hydraulic workshop press with fixed cylinder Psdpfx Agsxabcwjxsgk - Ideally suited for aligning axles, shafts, etc., as well as for pressing in and out pins, bearings, bushings, and much more - Heavy-duty, welded steel construction for high loads - Table height adjustment via piston rod * Supplied with round steel chain and 2 locking pins * Piston rod with metric interface - 1 set of V-block prism supports - Pressure gauge for pressure display - Easy-to-use hand control with: * 1x approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Hydraulic tank mounted at the side - Operating manual

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressure: 150 t Stroke: 300 mm Table dimensions: 1070 x 290 mm Clear width between guide columns: 1070 mm Pgedpfjxaabfjx Agxek Approach speed: 9.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Motor power: 11.0 kW Machine weight: approx. 1870 kg Dimensions (L x W x H): 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approx. 2 operating hours Condition: LIKE NEW Special price on request Equipment: - Robust electro-hydraulic workshop press with fixed cylinder - Ideally suited for straightening axles, shafts, etc., as well as for pressing in and out bolts, bearings, bushings, and much more - Heavy-duty welded steel construction for high load applications - Adjustable table height via piston rod * Includes round steel chain and 2x locking pins * Piston rod with metric fitting - 1x set of V-block prism supports - Pressure gauge for pressure display - Simple manual controls including: * 1x approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Side-mounted hydraulic tank - Operating manual

Stanje: novo, Pressure: 20.0 t Stroke: 185 mm Flat bar, upright: 200 x 12 mm Working speed: 10.0 mm/sec Return speed: 10.0 mm/min Working height: 930 mm Table: 480 x 1060 mm Total power requirement: 2.2 kW Motor: 400 Volt, 50 Hz Oil capacity: 12.0 l Weight: 530 kg Dimensions (L x W x H): 1150 x 480 x 1400 mm Equipment: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made from hardened and ground forged steel - Digital display for stroke adjustment * Programming of 1x bend endpoint & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) Pgodpfx Ajxabtvsgxok * Bending punch ... Angle: 60° / Bending radius: 5.0 mm * Die ... Angle: 60° / V-opening: 63.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material back gauge - Freely movable double foot switch - Machine can be moved with pallet truck/forklift - Operating manual

Stanje: novo, Druck 80,0 t Hub 285 mm Flacheisen über die hohe Kante 300 x 25 mm Arbeitsgeschwindigkeit 10,0 mm/sec Rücklaufgeschwindigkeit 10,0 mm/min Arbeitshöhe 930 mm Pgodpfx Aexabhajgxek Tisch: 750 x 1425 mm Gesamtleistungsbedarf 10,0 kW Motor 400 Volt 50 Hz Ölinhalt 120 l Gewicht 1700 kg Abmessung L-B-H 1500 x 750 x 1800 mm Ausstattung : - elektro-hydraulische Horizontalbiegemaschine - großer, robuster Maschinentisch aus gehärteten Stahl - Maschine aus gehärtetem und geschliffenen Schmiedestahl - Digitalanzeige für Hubeinstellung * Programmierung von 1x Biegeendpunkt & 1x Rückzugspunkt möglich - 1x Werkzeugsatz (1x Biegestempel / 1x 1V Matrize) * Biegestempel .. Grad : 60° / Biegeradius : 5,0 mm * Matrize .. Grad : 85° / V Öffnung : 100,0 mm - stufenlose Einstellung der Biegegeschwindigkeit & Presskraft - 1x manueller Materialanschlag - freibeweglicher Doppel-Fußschalter - Maschine mit Hubwagen/Stapler verfahrbar - Bedienungsanleitung

Stanje: novo, Pressure: 40.0 t Stroke: 285 mm Flat bar on the vertical edge: 250 x 24 mm Working speed: 10.0 mm/sec Return speed: 10.0 mm/min Working height: 930 mm Table: 660 x 1250 mm Total power requirement: 4.0 kW Motor: 400 Volt 50 Hz Oil capacity: 40.0 l Weight: 800 kg Pjdsxabhmepfx Agxjgk Dimensions (L x W x H): 1450 x 800 x 1300 mm Features: - Electro-hydraulic horizontal bending machine - Large, sturdy machine table made of hardened steel - Machine body made from hardened and ground forged steel - Digital display for stroke adjustment * Programming of 1x bending end point & 1x return point possible - 1 set of tooling (1 bending punch / 1 1V die) * Bending punch ... angle: 60° / bending radius: 5.0 mm * Die ... angle: 60° / V opening: 63.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1 manual material stop - Free-standing double foot pedal - Machine can be moved with pallet truck/forklift - Operating manual

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Sheet width: 2020 mm Sheet thickness: 2.0 mm Frame opening: 2100 mm Adjustable bending angle: up to 130 degrees Total power requirement: manual Machine weight: approx. 1850 kg Dimensions (L x W x H): 3100 x 725 x 1350 mm Exhibition machine – like NEW Has not been used yet (!!) Special price on request Features: - Heavy-duty/manual folding/bending machine with counterweight - Durable, robust steel welded construction for long service life - Universal application for tinsmiths and craftsmen - Fast and easy bending process via bow handle - All bearings and guides of solid design - Easily adjustable upper beam for efficient working - Manual adjustment of lower beam Pedpexab S Sefx Agxogk - Manually adjustable angle stop with analog degree display

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Tube diameter 10.0–42.0 mm steel Wall thickness 3.0 mm steel Tube diameter 54.0 mm copper/aluminum Solid material – diameter 30.0 mm Wall thickness 2.0 mm Rotational speed 1.30 rpm Voltage 400 volts Total power requirement 1.5 kW Weight 110 kg Dimensions (L x W x H) 400 x 450 x 570 mm Exhibition machine – as NEW Never used (!!) Special price on request - Steel tube capacity: 42.0 x 3.56 mm - Gas pipe capacity: 1"1/4 gas x 3.5 mm - Square profile capacity (FE 42): 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Min. radius: 2 x D - 6-sided tool holder - Min. external diameter: 5 mm – 1/8" gas Features: - Patented quick-change tool system - Single bending speed - Digital machine display - 1x free-moving foot switch - 1x bending tool set included Pgodpfx Agexab Hvoxek * For tube Ø 25 mm / radius 100 * Additional segments available on request at extra cost * ERCOLINA tool holder

Stanje: novo, Leto izdelave: 2026, Pipe diameter 10.0 - 60.0 mm steel Wall thickness 3.0 mm steel Pipe diameter 64.0 mm CU/Alu Wall thickness 4.0 mm Rotations per minute 1.25 - 2.50 rpm Solid material - diameter 35.0 mm Voltage 400 Volt Control ISITAN NC Total power requirement 2.0 kW Weight 140 kg Dimensions L-W-H 380 x 900 x 600 mm Exhibition machine – like NEW never used (!!) Special price on request Pedpfxjxabu He Agxjgk - Capacity steel pipe 60.0 x 3.0 mm - Capacity gas pipe 2" gas x 3.91 mm - Capacity square profile (FE 42) 60 x 30 x 4.0 mm - Max. bending radius 200 mm - Minimum radius 2 x D - Hexagonal tool holder - min. outside diameter 5 mm - 1/8" gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Infinitely variable adjustment of bending speed - One bending speed - 1x movable foot switch - 1x bending tool set included * For pipe Ø 38 mm / radius 155 * Additional segments available on request at extra charge * Tool holder ERCOLINA

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Pgjdpjxabkbjfx Agxjk Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: novo, Working length: 3000 mm Working width: 360 mm Roller diameter: 60.0 mm Pgjdpfxexaai Ae Agxok Load capacity: 900 kg Height adjustment: 620 - 1055 mm Weight: 107 kg Features: - Discharge roller conveyor with end stop - Ideal aid for supporting long and heavy workpieces - Roller support steplessly height-adjustable and can be locked - Secure workpiece support thanks to robust, high-load galvanized steel rollers - Universally applicable, e.g. for metal circular saws, band saws, woodworking machines, etc. - The roller conveyors feature a stable construction made from special profiles - Trouble-free and efficient material handling for both feed-in and removal of workpieces

Stanje: novo, Operating length: 3000 mm Operating width: 360 mm Roller diameter: 60.0 mm Load capacity: 900 kg Height adjustment: 620 - 1055 mm Weight: 66 kg Description: The RB 10 roller conveyor is a particularly practical tool for supporting and moving long and heavy workpieces. It is flexible in use and can be extended as required. Thanks to retrofittable PVC-coated rollers, it is also suitable for delicate materials. Pgsdpfxjxaaf De Agxok Features: - Infeed roller conveyor - Ideal tool for supporting long and heavy workpieces - Continuously height-adjustable and lockable roller support - Secure workpiece support thanks to robust and high-capacity galvanized steel rollers - Versatile use, e.g. for metal circular saws, band saws, woodworking machines, etc. - Rollers mounted on a sturdy special profile frame - Efficient and trouble-free material handling for infeed and outfeed of workpieces - Mounting adapters for the respective machines must be provided by the customer