Thread-Cutting Machine

FALKEN BHK 02 (M24)

Stanje: zelo dobro (rabljeno), CHIRON DZ 18.2 KW, Baujahr 2012 Steuerung: Fanuc 31i Verfahrwege: X/Y/Z 630 x 520 x 400 mm Palettenwechsler: 2 x 940 x 470 mm Doppelspindel-Ausführung Spindelabstand: 320 mm Bodpfxjuviiwo Am Esww 2 x 32-fach Werkzeugwechsler Werkzeugaufnahme: SK40 Max. Spindeldrehzahl: 10.000 U/min

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Bedewb Eptjpfx Am Ejww Tehnične podrobnosti so prikazane na sliki. Orodja v leseni škatli so priložena stroju.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle Bodpfx Amsx D Iuzo Ejww • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 500 mm, skupna višina: 2.700 mm, skupna dolžina: 3.800 mm, skupna širina: 2.350 mm, širina mize: 500 mm, dolžina mize: 750 mm, skupna masa: 9.500 kg, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 22, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Prodam: Strojna freza AXA DBZ – leto izdelave 2014. Bedpfjy D Enhjx Am Ejww Nadzorni sistem Heidenhain iTNC 530 HSC. 2 obdelovalna prostora, velikosti 750x500. Petosna rotacijska miza, nameščena na eni mizi (z neprekinjenim gibanjem). Skladišče za 22 orodij SK40. Optični merilni sistemi na vseh osi. Sesalni sistem za odvajanje oljne megle. Izmetalnik sekancev. Visokotlačna črpalka. Zunanja postaja za filtriranje hladilne tekočine. Stroj je v delovnem stanju in pripravljen za testiranje. Garancija 3 mesece. Možnost namestitve in zagon pri stranki. Prilagojen za nihajno obdelavo (obdelava na eni mizi, nalaganje na drugi).

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system Bwedpem Rpy Rjfx Am Eow The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or

Stanje: dober (rabljeno), Deli, ki jih oseba kaže z roko, niso vključeni. Tehnični podatki so prikazani na sliki. Orodja v leseni škatli so priložena stroju. Bodpowb Em Sjfx Am Eeww

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [degree] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [degree] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [degree] - Minimum B-axis resolution: 0.001 [degree] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 SUBSEQUENT MACHINING Number of positions: 4 Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Hours under power: 52,500 [h] - Operating hours: 11,639 [h] EQUIPMENT - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank: Hydro-Fluid HP3 * with high-pressure pump: 40 - 170 [bar] Bwedpfx Asu Uu Syem Ejw - Chip conveyor - Spindle cooling - Parts removal - Parts belt conveyor - Bar feeder: LNS EXPRESS 220 S2 - Fire extinguishing system* * Note: Functionality not guaranteed. Should be checked by a qualified company of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] Bodjwd Ud Espfx Am Ejww - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [degrees] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [degrees] - Minimum B-axis resolution: 0.001 [degrees] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 SUBSEQUENT MACHINING - Number of positions: 4 - Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Power-on hours: 12,249 [hrs] - Operating hours: 1,816 [hrs] EQUIPMENT - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank - Parts remover - Parts conveyor belt - Electrical transformer

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Bsdeu Ix N Sjpfx Am Eeww Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Bwjdpfxjv Raats Am Esw Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control system: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-off device - Workpiece removal conveyor - Bar feeder, manufacturer: IEMCA, type: PRA 40/35/P