Ewm Tig 350 Dc Fwd nakup rabljenega (10.436)

Stanje: rabljeno, prevoženi kilometri: 80.000 km, moč: 96 kW (130,52 KM), prva registracija: 04/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: srebrn, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 7, skupna dolžina: 6.204 mm, skupna širina: 2.198 mm, skupna višina: 2.334 mm, dolžina tovornega prostora: 2.850 mm, širina tovornega prostora: 2.140 mm, Leto izdelave: 2021, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, Na prodaj je dobro vzdrževan Ford Transit DoKa z odprtim tovorom in priljubljenim 2,0-litrskim dizelskim motorjem, ki je priljubljen po vsem svetu.* Vozilo je v dobrem stanju! * Nemško vozilo * Redno vzdrževano Godpfjz Ighrox Abrobu * Euro 6d standard * Prvi lastnik * Neprekinjeno vzdrževano, v skladu s servisno knjižico. Oprema: dvojna kabina, odprti tovor L3 * Srebrna barva * Priklop za prikolico * Povečana dovoljena masa prikolice * Ogrevano vetrobransko steklo * 7 sedežev * Večfunkcijski volan * Metalik barva * Registracija kot tovornjak * Ogrevana zunanja ogledala * Električna zunanja ogledala * Električni pomik stekel * Osrednje zaklepanje * itd... Tehnični podatki: Dovoljena celotna masa: 3500 kg * Prazna masa: 2300 kg * Nosilnost: 1200 kg * Dovoljena masa prikolice: 2500 kg * Celotna dolžina: 6204 mm * Dolžina odprtega tovornega prostora: 2850 mm Zakaj smo prava izbira? Privlačno financiranje prek naše partnerske banke. * Dostava želenega vozila po vsej državi * Sprejem starega vozila po ugodnih pogojih * Registracijske tablice za prevoz (5-dnevne/carinske) običajno še isti dan * Brezplačni prevoz z letališča ali železniške postaje Vsa vozila so strokovno očiščena in higiensko čista! Posebnosti: dezinfekcija notranjosti in sistema za prezračevanje z uporabo ozonske obdelave. Dvostopenjsko poliranje na zunanjosti * po potrebi korekcija barve in manjša popravila Vsa naša vozila so bila tudi temeljito pregledana. Seveda so vključene nove tekočine, filtri in drugi stroški, o katerih vam ni treba skrbeti. Po želji lahko vozilo pokažemo pri neodvisnem inšpekcijskem organu ali v vaši izbrani delavnici. Veselimo se, da smo vzbudili vaše zanimanje, in smo vam na voljo 24 ur na dan. Če imate vprašanja, pripombe ali posebne želje, nas ne obotavljajte in nas kontaktirajte! Več informacij in vpogled v našo poslovno filozofijo najdete na Posebna oprema: Program za stabilizacijo prikolice (TSA), 13-polna vtičnica za prikolico, metalik barva, rezervno kolo v voznem stanju, paket vidljivosti 1, zunanja ogledala, električno nastavljiva in ogrevana Dodatna oprema: Predal v stropu kabine voznika, zračna blazina na strani voznika, avdio/radijski upravljalnik na volanu, avdio sistem: radio z USB in Bluetooth prostoročno telefonsko napravo, zunanja ogledala s kratko podporo, smerokaz integriran v zunanje ogledalo, osnovna oprema, potovalni računalnik, priklopna postaja (MyFord Dock), elektronska porazdelitev zavorne sile (EBD), elektronski sistem za nadzor pogona, okno v tovornem/potniškem prostoru: - fiksno, 2. vrsta sedežev levo, okno v tovornem/potniškem prostoru: - fiksno, 2. vrsta sedežev desno, FordPass Connect vklj. eCall, vozilo brez sistema ABS, močnejši generator, omejevalnik hitrosti 120 km/h, gretje z recirkulacijo zraka, karoserija/nadgradnja: odprti tovor s dvojno kabino, standard, črna/siva maska hladilnika, volanski stolpec (volan) nastavljiv po višini in dolžini, motor 2,0 L - 96 kW TDCi KAT, My Key (2. ključ vozila programirljiv), digitalni sprejem radia (DAB+), medosna razdalja 3954 mm, paket zadnjih sedežev 1 (2 dvojna sedeža, 2. vrsta, snemljiva), nizka raven emisij v skladu z emisijskim standardom Euro 6d-TEMP, paket sedežev 4: voznikov sedež (nastavljiv v 4 smeri) - sedež za sovoznika, tkanina, sedeži v kabini voznika: voznikov sedež z podporo za ledveno področje, sedeži v tovornem/potniškem prostoru: 2. vrsta, trosed, jeklena platišča 6,5x16, sistem za samodejni zagon/ustavitev, zatemnjena stekla.

Stanje: rabljeno, VALJARNA Leto izdelave: 2004, ponovna uvedba v obratovanje: 2021 DIMENZIJE VALJA Dimenzije valja Val za podporo – premer 480 mm x širina 460 mm Delovni valj – premer 150 mm x širina 420 mm Hitrost: maks. 700 m/min Pogonska oprema za pomožni valj Glavni pogon valjarne: 553 kW, enosmerni tok Obseg debeline traku: 3 mm – 0,07 mm Gedpfxez Irb Ds Abrsbu Obseg širine traku: 250 mm – 350 mm Postaja za menjavo valjev Valjna sila: 2500 kN Maks. napetost traku: Prestavna razmerja: 1: 320 – 3200 kp, 2: 160 – 1600 kp Maks. teža tuljave: 5 ton Maks. zunanji premer tuljave: 1600 mm Notranji premer tuljave: 400/500 mm Krmilni sistem: SPS S7 400 Krmiljenje oblike Upogibanje valja AGC (avtomatsko krmiljenje valjanja) Sistem za odvajanje dimnih plinov ODVITEV Talna ploščad v obliki črke „L“ za transport tuljav z zadrževalnim roko Odvitev tuljave z roko in blažilnim valjem Pogonska oprema za odvitev tuljave: hidravlični motor Seekampova enota za nadzor robov Stojalo s tremi valji za izravnavo z odvitvalno mizo + blažilni valj, stranski vodniki in hidravlična sponka za trak – NOVO, 2007 LEVI IN DESNI NAVIJAČ Pogonska oprema navijača: 220 kW, enosmerni tok (na vsaki strani) Stojalo za tuljave / ploščad za tuljave v tleh Navijač z zadrževalnim roko Vollmerjev val za oblikovanje z analognim sistemom VMF 2000 Merjenje debeline: Vollmerjeva kontaktna merilna glava + laserska merilna glava Ločevanje olja: 2 kompleta gumijastih valjev + 1 komplet valjev za ločevanje olja (filc) Vodniki za robove + sponka za trak 3 kovinski valji za ločevanje olja Filtracija olja: Proizvajalec: Achenbach Buschhuetten Tip: Superstack Leto izdelave: 2003 Nameščen na ravni proizvodne ploščadi

Leto izdelave: 1987, stanje: rabljeno, Nadzorni sistem: Cybelec DNC 600S. Ogled je možen po predhodnem dogovoru. Gbodpfxsz Dkkcs Abreu

Stanje: zelo dobro (rabljeno), Manufacturer: Aerofoil Gbsdek Nli Hepfx Abrju Model: 30J 26° JAR Blade diameter: 750 mm 2 stages Airflow: approx. 5000 m³/h++ 110V, 5.5A, 0.48 HP, direct current (DC)

Stanje: pripravljen za uporabo (rabljen), Bosch ASM 25 servopogon SN: 302650 DC 520V, rabljen, običajni znaki uporabe, 100 % delujoč, obseg dobave po fotografijah Gbjdpfx Abemgwufjrju

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 051888, Used Automatic Circular Saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Removable pneumatic anti-burr vise. Gbjdpfxerfw Ike Abreu Pneumatic cylinder for the head movement, with brake for speed adjustment. Transmission with double expanding pulley for variable speed from 15 to 90 m/s. Pivoting head on adjustable self-lubricating bushings. 600 mm feeder stroke operated by pneumatic cylinder. Repeatable up to a maximum of 9 strokes, for a total feed length of up to 5400 mm. Maximum feeder clamp opening: 160 mm. Programmable piece counter. Minimum trim cut waste: 160 mm. Feeder speed adjustment valve. Ammeter. Reverse function. Emergency stop button and control panel lock switch. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Full safety guard designed for quick blade change. Blade diameter: Ø 350 mm. Cutting capacity: Round tubes 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Specifications: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Worktable height: 950 mm Weight: 420 kg

Stanje: rabljeno, TIG and MMA Inverter Welding Machine ESS Type 170 ATG (AC-DC) TIG Welding Machine Serial No.: Year of Manufacture: 2007 TIG Output 170 A = 35% duty cycle 130 A = 60% duty cycle 110 A = 100% duty cycle Electrode Output 140 A = 35% duty cycle Power Supply 230 V, 50 Hz - Suitable for both DC and AC welding - HF ignition - Infinitely variable power adjustment Gbsdjrtvi Uspfx Abrsu - 2-stroke and 4-stroke welding modes - Pulse welding mode - Stick electrode mode - 8-meter hose package with TIG torch - Shielding gas pressure regulator - Fan cooling - Portable Dimensions (WxDxH) 400 x 270 x 500 mm Weight 26 kg Welding tests show excellent results when welding stainless steel with DC and excellent results when welding aluminum with AC. Otherwise, the machine is also in very good condition.

Stanje: rabljeno, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 The chain-driven roller conveyor is in good (used) condition and fully operational. It is equipped with a SEW geared motor. The support legs are not included in the delivery but are available as an option upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (spacing) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via adjustment device Electrical specifications: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: - Supports - Side guides - Frequency inverter for stepless speed control Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Gedpfx Abervmtdorsbu Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: zelo dobro (rabljeno), MRS 350 Multi-saw - Feed belt width: 35 cm - Maximum cutting height: 13 cm - Main motor: 37 kW - Infinitely variable feed speed adjustment Gjdpjp Audxefx Abrobu - Maximum saw blade diameter: 400 mm

Stanje: rabljeno, Leto izdelave: 2000, Faceplate diameter: 3200 mm Swing diameter: 3500 mm Turning height: 2200 mm Dimensions (L x W x H): 7730 x 6240 x 6700 mm Control type: 840 D sl Voltage: 3 x 400 V Frequency: 50 Hz Rotational speed: 0.8 - 40 rpm Max. turning diameter: 3500 mm Total power requirement: 51 kW Machine weight approx.: 86 t Technical Data Machine type: CNC Vertical Lathe Manufacturer: Rafamet Year of manufacture: 1973, conventional Completely overhauled with control retrofit in 2010 Control system upgrade in 2016 Control: Siemens 840 D Sl Condition: Very good Faceplate Faceplate turning diameter: 3,200 mm Number of speed ranges of faceplate: 3 (infinitely variable) Speed ranges of faceplate: 0.8 - 40 rpm Range I: 0.8 – 3 rpm Range II: 0.8 – 11 rpm Range III: 0.8 – 40 rpm Workpiece Machining Max. turning diameter: 3,500 mm Max. turning height of workpieces above the faceplate: 2,200 mm Vertical Slides Minimum axis distance between the vertical slides: 470 mm Maximum ram travel of left vertical slide: 985 mm Gbodeuddcgjpfx Abrju Maximum ram travel of right vertical slide: 985 mm Axis feeds – stepless feed max.: X1,2 3 m/min max.: Z1,2 2.5 m/min Ram not swiveling Cross Rail – Slide Rapid traverse of cross rail: 600 mm/min Maximum distance between cross rail and faceplate: 2,300 mm Load Capacities + Permissible turning force when machining workpieces with a turning diameter of 2,000 mm and a rotational speed of 20 m/min: 8,000 kg + Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for all slides: 45 mm² + Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 2.5 mm² + Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for all slides: 120 mm² + Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 22.5 mm² + Maximum allowable workpiece weight at 0.8 – 3.15 rpm: 17,500 kg + Maximum allowable workpiece weight at 4 – 40 rpm: 7,500 kg Electric Motors Power and speed of main drive motor: 51 kW Feed motor power of: - Vertical slide beam (2 units): 16 Nm (gear ratio 1:10) - Ram (2 units): 16 Nm (gear ratio 1:12) Power and speed of hydraulic pump drive motors (2 units): 3 kW – 1,500 rpm Power and speed of clamping hydraulic motor for vertical slide beam: 1.5 kW – 1,500 rpm Power and speed for cross rail adjustment: 15 kW – 1,500 rpm 3.5 Specifications for compressed air supply and other consumables Compressed air connection: 6 bar, oil- and water-free 3.6 Energy consumption, conditions Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Protection: 315 A Main dimensions and weight of the machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto 60 interface Non-driven Front plate Front plate turning diameter: 3,200 mm Chuck plate diameter: 3,400 mm Number of rotational steps of the front plate: 3 (infinitely adjustable) Speed ranges of the front plate...

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBMA500Ausschub, DEMAG KBK - double-girder telescopic crane - overhead crane runway with dimensions approx. 15x5m (5m bridge + two central 6.5m rails) with approx. 1.5m lateral extension!! Safe working load / lifting capacity 500 KG - 0.5t Technical data of the system: Runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, end carriages, end plates, brackets/hangers, B2/2 type telescopic frame, etc. Includes 500KG Demag DC chain hoist - lifting height approx. 5m Power supply along the longitudinal side via conductor rails Crane is dismantled and available immediately Running rails can be extended to desired length Very good used condition, see images Gedpfxeu I Ur No Abrsbu Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity from 125KG to 1600KG Please feel free to request a quote for your crane runway with your required capacity and dimensions.

Stanje: pripravljen za uporabo (rabljen), SEM MT30Z4-85 feritni ščetkani DC servomotor SN:G12677 + dajalnik SD-253-510W, rabljeno, običajne sledi uporabe, 100% delujoče, dobava po fotografijah. Godpfxjt S Amzj Abrjbu

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories Gbedpfx Aoh Rdwxjbrsu - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Naprodaj 4 spiralni transporterji (cena za 1 kos). 2 kosa, dolžina 5,8 m (1 kos brez priključkov; 1 kos (razrezan na pol) je treba zvariti). 2 kosa, dolžina 7,3 m. Oba transporterja imata originalne priključke (1 transporter je sestavljen iz 2 delov). Gjdpfx Absibwfzjrobu Podrobnosti o motorju so na fotografiji. Če imate kakršna koli vprašanja, nas prosimo kontaktirajte. Če vas zanimajo vsi transporterji, vam lahko ponudimo ugoden popust.

Stanje: dober (rabljeno), Interroll tekoči transportni sistem, 2,17 m, z motorjem Element tekočega transportnega sistema Interroll je v odličnem stanju. Poleg tega je tekoči transportni sistem opremljen z lastnim pogonskim motorjem. Serija: 5600 Širina: 410 mm Dolžina: 2175 mm Gedpfeicaykox Abrsbu Razmak: 75 mm Nosilnost: 200 kg na meter Napetost pogona: 400 V Celotna likvidacija tovarne, velika izbira regalov za shranjevanje, paletnih regalov, regalov s policami, dvigal. Visokokakovostni industrijski stroji, stružnice, brusilnice, ročni stroji. Še več izdelkov – novih in rabljenih – najdete v naši spletni trgovini! Mednarodne stroške pošiljanja lahko povprašate.

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Net weight: 1,870 kg Gbodpfx Ajh Dwr Hebrou Without cables and control cabinet Supplement to the inspection report!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, GM – DC330MINI V4 Etikettenkonverter Baujahr: 12/2022 _____ Maschinenspezifikationen und Ausstattung: • Maximale Bahnbreite: 330 mm • Geschwindigkeit bis zu 65 m/min halbrotativ; 72 m/min vollrotativ • Abwickelstation max. 700 mm • Aufwickelstation max. 450 mm • Touchscreen-Bedienfeld • Flexodruckeinheit • Corona-Vorbehandlung • Bahnkantensteuerung • Halbrotativer Stanzeinheit • Automatische Registerkontrolle • GEW–UV-Trocknung Gbodsv Aa Twopfx Abrou • Laminierung • GM SmartCrush _____

Stanje: rabljeno, Round steel 30 mm Square steel 28 mm Angle steel 90 x 8 mm Flat bar 150 x 8 mm Pressing force 35 t Total power requirement 2.8 kW Machine weight approx. 0.5 t Gjdevu Hb Sepfx Abrsbu Required space approx. 0.75 x 1.0 x 1.5 m Section steel shear combined with: - Foot switch - Length stop

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 350 t Platen dimensions: 1040 x 950 mm Tie bar spacing: 710 x 630 mm Screw diameter: 50 mm Godpfx Asva Ht Sjbrjbu Shot weight: 400 g Shot volume: 442 cm³ Design: Horizontal Drive type: Hydraulic

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator Gbodpfefgyicjx Abrju • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Gedpfx Abofg E Hzerobu Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), številka stroja/vozila: 081058130, (slotting / cutting / creasing) Performance: A4 brochures (4-side cutting, central creasing) 9 sheets/min (540 sheets/hour) Format: Gbodpfjffx Sksx Abrju Min: 210 mm (width) x 210 mm (length) Max: 320 mm (width) x 650 mm* (length) Paper weight (gsm): min 110 / max up to 300 Equipment / further details: Creasing: 1 x creasing blade, transverse to sheet feed direction Max. programmable: 10 creases, programmable in 0.1 mm increments

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 290 mm Quill stroke: 130 mm Spindle taper: SK 40 Spindle speeds: 70 - 3200 rpm Table traverse (cross): 520 mm Table traverse (longitudinal): 230 mm Clamping area of table: 730 x 210 mm Connection voltage: 400 V Total power requirement: 1.1 / 1.5 kW Machine weight approx.: 0.32 t Space requirement approx.: 1.1 x 0.9 x 1.15 m Equipment • Digital depth gauge • Adjustable guides via gib strips • Wide 12-step speed range from 75 - 3200 rpm • Smooth operation thanks to hardened and ground gears running in an oil bath • Forward/reverse operation • Prismatic guides on all axes • Gear head swivels 90° • Swarf guard with safety interlock Gbjdefv H Hqopfx Abrsu Machine base optional.

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 290 mm Drilling stroke: 130 mm Spindle taper: SK 40 Spindle speeds: 75 – 3200 rpm Table transverse travel: 500 mm Table longitudinal travel: 230 mm Table clamping surface: 720 x 210 mm Connection voltage: 400 V Max. milling cutter diameter: 80 mm Gbodpfsfv H Hujx Abreu Total power requirement: 1.1 kW Machine weight approx.: 0.35 t Space requirement approx.: 1.1 x 0.9 x 1.2 m Equipment • Digital display • Digital depth gauge for quill • Adjustable guides via tapered strips • Wide, 12-step speed range from 75 – 3200 rpm • Smooth operation thanks to hardened and ground gears running in an oil bath • Forward/reverse operation • Prism guides on all axes • Gear head swivels 90° • Chip guard with safety interlock Machine base optional.

Leto izdelave: 2023, stanje: novo, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface treatment of metallic and non-metallic workpieces. These machines feature a large screening area and allow for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound cover Gbsden Smclepfx Abrou - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Stand for control panel - Rinsing pipe (various types) Images are for reference only. Optional accessories are available at an extra charge.