Separator oljne megle

ISI Gruppe - RON 60 STR - 350 m³/h – 230 V

Stanje: dober (rabljeno), LNS ECO LOAD bar feeder Ffodpfxjlg Aq Ae Aflet

Stanje: novo, Engine power: 4.0 (5.2) kW (HP) Ffodpfx Aeb Nvinoflot Electrical connection: 400V 50Hz (3-phase) Circuit protection: 16 A Length: 875 mm Width: 735 mm Height: 1410 mm Weight: 55 kg Material: painted steel Discharge height in: 450 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Ffsdpfx Aewuddvsflst Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: novo, Leto izdelave: 2025, ATTENTION: POSSIBILITY TO CALCULATE ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers: gantry cranes, semi-gantry cranes, jib cranes, column cranes, suspended overhead cranes, and bridge cranes. We encourage you to submit inquiries for quotations, which we prepare based on the customer's specifications such as: type of crane, lifting capacity, lifting height, dimensions, and runway length. This advertisement refers to a gantry crane/hoist with a lifting capacity of 5 TONS. All crane components are made from top-quality materials, ensuring durability and resistance to damage even in demanding environments. Ffedpev Ni Rxefx Afljt TECHNICAL SPECIFICATIONS: GANTRY CRANE HOIST, CAPACITY: 5 TONS Span length: 6 m Lifting height: 3.55 m Lifting mechanism: 5-ton electric chain hoist Lifting speed: 2.7 m/min Cross travel speed: 11 m/min Crane travel speed: 10 m/min Duty class: A3 Power supply: 380V / 50Hz / 3-phase Control mode: pendant control + remote All machines are invoiced with VAT. Should you have any questions, please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, CNC brusilni stroj za orodja Walter Helitronic Power FH, s paletnim nakladalcem za valjaste obdelovance, z 8-kratnim menjalnikom brusnih plošč, z elektrostatičnim odstranjevalcem izparin, s sistemom za gašenje požara, s črpalko za oljno oskrbo, programska oprema Walter-Window-Mode in Toolstudio. Programski paketi: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, s pripravo za hidravlično napravo (Lynette). Brusilno vreteno (eno-vreteno) je neposredno gnano in opremljeno z oljnim hladilnikom. Motor z votlo gredjo za os A ima hitrost 0-750 1/min. Osi C, X, Z in A so bile obnovljene leta 2022. Ffjdpfx Aox E Dfbjflst

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Fjdpfevivx Nex Aflsft Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Leto izdelave: 1995, Stanje: rabljeno, številka stroja/vozila: LWT , Tank & Environmental Protection Wozniack – Specialized Company in Accordance with the Water Resources Act (WHG) Dear Sir or Madam, We are offering a 20,000-liter storage tank for the storage of water and wastewater as follows. This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Including manufacturer's certificate according to DIN and nameplate. The tank is internally cleaned and externally insulated with bitumen. Suitable for both underground and aboveground installation. Tank dimensions: Length: approx. 6,400 mm Diameter: approx. 2,000 mm Weight: approx. 4,000 kg Shape: cylindrical Equipment: on request For use as a fire water tank, an additional suction line with an A fixed coupling according to DIN can be installed upon request. Of course, you can also participate in configuring your tank system! All our tanks are thoroughly inspected and checked by selected employees in our company. We can also offer cost-effective delivery upon request. Inspection of our tanks is possible at any time. Further tanks for aboveground as well as underground storage in all sizes are available and for sale at our premises. Have we convinced you with our offer? If you have any questions or requests, simply call us – one of our experienced staff will be happy to advise you. General Information: All offers are ex works Warstein, loaded free onto truck. Delivery can be offered at reasonable extra cost. Delivery time: immediate You will receive an invoice with VAT shown separately. Furthermore, we purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle and remove these systems. Fedpfx Afoc Nkyvjleft Best regards from Warstein, Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3400 rpm - Cutting capacity at 90° round: 120 mm - or flat: 105 x 105 mm - or: 180 x 70 mm - at 45° round: 110 mm - flat: 135 x 60 mm - Miter adjustment left and right: 45° Fedowq N Swepfx Aflsft - Saw head tilt adjustment for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2000 mm - Feed roller conveyor: 3000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1730 x D 1200 mm - Weight approx.: 180 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Ffedpfx Afjvtancjlst Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije.

Stanje: novo, Leto izdelave: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped parts with round or oval cross-sections etc., as well as with variable thickness for chairs, tables, beds, and related items. The main features of the machine include: frame made of electro-welded steel – rotating disc with two counter-rotating sanding belts driven by an electric motor, with a rotary movement around the workpiece – electrical control panel – 2 adjustable work tables (infeed – outfeed) – option for integration of 2 automatic workpiece feed units with adjustable speed via frequency inverter. Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10–100 mm (Ø) Fsdpfx Aoqnufvofloft Min. bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units available Camam, Comec, OMEF, Brusa di Garboli