Vrtanje in rezkanje M/C

KAMI FKM 350 PD / SK40

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 290 mm Drilling stroke: 130 mm Spindle taper: SK 40 Spindle speeds: 75 – 3200 rpm Table transverse travel: 500 mm Table longitudinal travel: 230 mm Table clamping surface: 720 x 210 mm Connection voltage: 400 V Max. milling cutter diameter: 80 mm Total power requirement: 1.1 kW Machine weight approx.: 0.35 t Space requirement approx.: 1.1 x 0.9 x 1.2 m Equipment • Digital display • Digital depth gauge for quill Fgjdefv H Huspfx Acdef • Adjustable guides via tapered strips • Wide, 12-step speed range from 75 – 3200 rpm • Smooth operation thanks to hardened and ground gears running in an oil bath • Forward/reverse operation • Prism guides on all axes • Gear head swivels 90° • Chip guard with safety interlock Machine base optional.

Stanje: rabljeno, Leto izdelave: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt - Geometrically overhauled - Electrical system inspected, fully functional, relevant parts replaced - All wear parts renewed - Paint: light grey, good condition Equipment: - Electro-magnet 500 x 200 mm - Grinding spindle overhauled - 2-axis digital readout for Y and Z axes - Automatic feed for Y and Z axes - Y-axis with zero shut-off - Manual hand wheel dresser - Infinitely variable speed for grinding wheel - Constant speed compensation for wheel wear - Used paper band filtration system Max. height with 250 mm wheel diameter: 290 mm Max. grinding area: 600 x 250 mm Fodpfx Acjwb Hygsdsgf Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics within Germany Delivery: ex works Availability: immediately Payment: before collection Acceptance at our facility Shipping as per your instructions

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 Fodjtzf N Repfx Acdsgf - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Leto izdelave: 1981, stanje: zelo dobro (rabljeno), Obročno ploščo premer 1300 mm maksimalni premer struženja 1100 mm Fodpfxsk Dz N Ij Acdegf obseg premera struženja 460–1250 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Fodpfemhfrrox Acdjgf Year of manufacture: 1976 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months single-shift from delivery on the mechanical components overhauled by us. Electrical and electronic components are excluded, as these have only undergone a functional test. For machines located outside our Northern Bavaria sales region, travel expenses are to be borne by the customer. Geometric acceptance test with test protocol included. Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, sold as seen The machine corresponds technically to the state of the art at the time of manufacture.

Stanje: dober (rabljeno), Leto izdelave: 2003, nosilnost: 150 kg, doseg roke: 2.700 mm, Model: KR150 Stanje: RABLJENO Leto: 2003 Krmilna omara: KRC2 Vključeno: Manipulator + krmilna omara KRC2 + vsi kompleti kablov Fjdpfx Ashakfaecdogf Za ponudbo in možnosti obnove nas prosim kontaktirajte. Kot PLC Merkezi EOOD imamo na zalogi več kot 300 robotov in delamo z znamkami KUKA, ABB, FANUC in Motoman.

Stanje: novo, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench has a replaceable, robust tabletop that accommodates all TM fixture components with a diameter of approximately 1.6 cm. This allows you to create ultimate, high-performance, compact mobile workstations. Expand your clamping and fixturing possibilities and be prepared for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for holding and clamping during welding and manufacturing. Clamp and fixate at any point on the reversible, double-sided precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Technical specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm boreholes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm boreholes 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT522K) 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT634K) 2 x Magnetic V-pads for surface 2 x Locating pins, suitable for 1.5875 cm boreholes 2 x Angle brackets, 1.5875 cm boreholes (T50305) 2 x Angle brackets, 1.5875 cm boreholes (T50304) 4 x Stops, suitable for 1.5875 cm boreholes (T54203) 4 x Stops, suitable for 1.5875 cm boreholes (T54205) 4 x V-block spacers, suitable for 1.5875 cm boreholes 8 x D-stop bars, 1.5875 cm boreholes 8 x V-blocks, suitable for 1.5875 cm boreholes Fgodpexqrhlsfx Acdef 10 x Ball lock bolts, suitable for 1.5875 cm boreholes 12 x Magnetic rests

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar trunking system available! Total stock: 75 running meters! Type KSA 250A / 250 Ampere - 5-pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Busbar lengths mainly 5m, also available in 1.5m and 3m Price per meter incl. connectors, end pieces, and mounting brackets Feeder and tap-off boxes 16-32-63A available as options (Other tap-off boxes 125 - 250A available upon request) Dismantling performed by a certified electrician. Fedpfx Aspgmryocdegf Busbars are in excellent condition! Please inquire about your required lengths or accessories! Stock item, immediately available! ----- Old Kloeckner Moeller BD1 system still available! Busbars, elbow elements, feeders, and tap-off boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock! Please inquire! Are you also looking for a crane system?

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal tool milling machine with gear transmission, travel distances X/Y/Z - 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, 3 kW motor, 18 speeds 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left/right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/tilting table, dimensions 1500x1700x1750 mm, approx. 2200 kg Fgsdpfx Ajfvci Escdof

Stanje: dober (rabljeno), x-travel 400 mm y-travel 375 mm z-travel 250 mm Fsdpfjxl E Syex Acdegf Table size 205 x 800 mm T-slots 4 x 45/14 H7 Spindle speeds 50 - 3150 rpm Tool holder 40 ISO Quill stroke 50.0 mm Feeds X & Z axes 5.0 - 1000 mm/min Feed Y axis 5.0 - 670 mm/min Rapid traverse 2.4 / 1.6 m/min Control system Heidenhain Total power requirement 5.1 kW Weight 950 kg Dimensions (L x W x H) 1860 x 1790 x 1750 mm From a training workshop (vocational school) Well-maintained condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN positioning/contouring control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Practical and simple operation - Electro-motorised feeds on all axes (X/Z/Y) * X and Z axes: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swivelling milling head in both directions - Tilting T-slot universal table - Vertical clamping area - Infinitely variable spindle speed adjustment - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping - Coolant system - Front coolant drip tray - Operating manual