Collet-Engelhartd Minor nakup rabljenega (1.676)

Leto izdelave: 2025, stanje: novo, Exhibition machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Ppsdpfx Afjxc Rmqoaou Made of 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame, with adjustable machine feet. Milling bed made of 19mm MDF sacrifice board. Table openings pre-configured longitudinally and transversely. Mechanical set consisting of profile guides incl. profile guide carriages, ball screw, and precision rack. All components assembled, pre-lubricated incl. test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, fully pre-installed in control cabinet, as well as sensors for each axis. Switching relays for automatic activation of the existing extraction system. Brush seals as dust protection and CE-conform safety devices by a traveling extraction unit and a laser scanner mounted on one side for workspace monitoring, with a 275° and 5.5m field range (machine positioned in a room corner). Handheld control unit equipped with all necessary functions for machine operation, incl. emergency stop button and dead man's switch. Tool length sensor for determination of tool length and automatic active offset adjustment. High-frequency spindle, 2.2 kW, incl. locking nut, frequency inverter, line filter, braking resistor, and a collet set. Monitor as built-in display, incl. mini PC with Windows 11, Beamicon2 control software, as well as mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Incl. milling bed designed as a vacuum table, consisting of four individually controlled sections. Cross-table made of PE with a cover plate made of MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. For connecting the vacuum pump to the power supply, a 16 amp, 400 V AC plug is required. The customer must provide 3mm raw HDF on both sides for the entire vacuum table (2500x1300mm) as a sacrificial plate. (Recommended use: machining coated wood-based materials) Incl. 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5 mm Z3 (HF53SRECAR) (Tool selection can be adjusted as required) Incl. maintenance package in a systainer Incl. grease gun 150 ml, one cartridge high-performance grease 400 g, silicone spray grease 500 ml, one grease fitting incl. hose section, and 30mm face mill with indexable inserts. Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Pjdpfx Aowka Upjfaspu - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage

Stanje: rabljeno, Leto izdelave: 2011, Lathes Travel X-axis: 270 mm Travel Y-axis: 120 mm Travel Z-axis: 1200 mm Podpowwv Ifefx Afajpu Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Spindle speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loading magazine IRCO ILS-RBK 100/16 Various main spindle reduction tubes NC-controlled workpiece removal unit Conveyor belt for transporting workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction unit Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loading magazine Main spindle as integrated spindle motor ISM 102 Sub-spindle as integrated spindle motor ISM 76

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Pjdpfjt Hwxbox Afaspu Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Ppedpot Hw D Rjfx Afaou Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel: 800 mm y-axis travel: 500 mm z-axis travel: 510 mm Total power requirement: 60 kW Machine weight: approx. 10 t Required floor space: approx. [ ] m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Model: MC 535 SM Year of manufacture: 2000, # 535 1108 TECHNICAL DATA: Bar diameter/profile size x maximum length: 80 x 800 mm (!) Longitudinal milling slide travel, X-axis: 800 mm Transverse milling slide travel, Y-axis: 500 mm Vertical milling head travel, Z-axis: 510 mm Workpiece axis rotation/swiveling: 360° / 120° Mounting height under vertical spindle: approx. 350 mm Spindle taper: HSK 63 Spindle speeds, steplessly adjustable: 36 – 10,000 rpm Feed rates all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW – 380 V – 50 Hz Weight: approx. 10 t Accessories / Special equipment: CNC path control FANUC Type 16iM, for all 5 axes, with monitor, direct input, various subprograms, tool correction, tool monitoring, parallel programming, and much more Bar loading magazine mounted on the left side, holds up to 10 bars Ø 80 mm Built-in CNC rotary-swivel unit with collet chuck for holding bar material, combined with hydraulic tailstock as counter support Automatic tool magazine with 66 positions, Ø 125 x 300 mm Tools also with ICS, dedicated tool data management, chip-to-chip 4 sec. Tool breakage control via laser light barrier, etc. Grip and swivel unit for holding the workpiece during 'cut-off milling', to detach it from the remaining bar and deposit it as a finished part on a conveyor Completely enclosed working area, chip conveyor built in, but no coolant system Probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine. Ppsdpfxst Hwyrs Afaou

Stanje: rabljeno, Leto izdelave: 1998, X-travel: 800 mm Y-travel: 500 mm Z-travel: 510 mm Total power requirement: 60 kW Machine weight approx.: 10 t Space requirements approx.: m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and accuracy, Model: MC 535 SM Year of manufacture: 1998, # 535 1107 TECHNICAL DATA: Bar diameter/profile size x max. length: 80 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 500 mm Milling head vertical travel Z-axis: 510 mm Workpiece axis rotation/swivel: 360°/120° Installation height under vertical spindle approx.: 350 mm Spindle taper: HSK 63 Spindle speeds, infinitely variable: 36 - 10,000 rpm Feed rate all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW - 380 V - 50 Hz Weight approx.: 10 t Accessories / Special equipment: - CNC path control FANUC Type 16iM, for all 5 axes with display, direct input, various subprograms, tool corrections, tool monitoring, parallel programming, and much more - Bar loader magazine on the left side of the machine for up to 10 bars, each Ø 80 mm - Integrated CNC rotary-swivel device with collet chuck for bar material, in combination with hydraulic tailstock as counter-support - Automatic tool magazine with 66 tool positions, Ø 125 x 300 mm length Podpfot Hwtfsx Afaspu - Tools also with ICS (internal coolant supply), independent tool data management, chip-to-chip time 4 sec - Tool breakage monitoring via laser light barrier, etc. - Gripping and swiveling unit to hold the workpiece during cut-off milling, remove it from the remaining bar, and transfer to a conveyor as a finished part - Fully enclosed working area, chip conveyor included, but without coolant system - Touch probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Stanje: rabljeno, Leto izdelave: 1969, Maximum wheel diameter: 265 mm Wheel width: 45 mm Module - max.: 4 Module - min.: 0.3 Workpiece diameter - max.: 300 mm Stroke length max.: 0–50 mm Stroke position adjustment: 25 mm Distance between working spindle and clamping surface max.: 170/245 mm Internal spindle taper: MK 4 Table size: 180 mm Table bore: 95/75 mm Strokes per minute: 450 – 840 Total power requirement: 10 kW Machine weight approx.: 5,200 kg Space requirements approx.: [not specified] Maximum external gear diameter (approx.): 265 mm Maximum workpiece diameter for internal gear cutting: 300 mm Maximum wheel width: 45 mm Module range: 0.3 – 4 Stroke length: 0 – 50 mm Stroke position adjustment: 25 mm Distance from table to spindle min./max.: 170/245 mm Internal spindle mount (external 90/50 mm, internal): MK 4 Table size: 180 mm Table bore: 95/75 mm Transverse table travel (approx.): 175 mm Steplessly adjustable stroke rate: 450 – 840 strokes/min Feed range: 0.09 – 0.6 mm/stroke Rotary feed: 2,722 – 681 strokes/cutter revolution Main drive: 10 kW, 380 V, 50 Hz Weight: 5,200 kg Accessories / Special equipment * Selector switch for various work programmes and manual control * Multiple-cutting device (roughing/finishing/burning out) * Hydraulic external workpiece clamping device mounted on the table (for internal gear cutting; similar to a collet chuck) * Separate control cabinet and separate hydraulic unit * Hydrostatic linear guide with separate oil cooler * Lateral table shift for optimal ram clearance Ppedet Hwruspfx Afaeu * Stepless stroke rate adjustment via GS motor * Integrated coolant system * Pre-settable pulse counter for precise table shut-off after each cut, with digital display * Various change gears

Stanje: rabljeno, Leto izdelave: 1987, x-travel 400 mm y-travel 250 mm Workpiece height 485 mm CNC control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4,000 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Table traverse (longitudinal/X) max. 400 mm Table traverse (cross/Y) max. 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Clearance table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16 ° Grinding Ø (bore max.) approx. 230 mm 18 spindle speeds depending on spindle motor steplessly adjustable 4,500-80,000 rpm. Planetary speed (C-axis) steplessly adjustable 5-250 rpm Ppsdpfxjt Hw Txe Afaeu U-axis, radial infeed 6 mm Total drive approx. 10 kW - 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with display, for 4 axes (= XYC + U-axis), with interpolation in 2 ½ dimensions (XYC). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly at the machine, with various subprograms, as well as manual movement of axes via control panel or electronic hand-held unit. Separate digital readout for the Z-axis • U-axis as manual and controlled radial feed axis on the grinding head, with digital readout for feed position, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire suppression system • Separately standing coolant unit with belt filter, separately standing hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock as inspected Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1990, x-travel 400 mm y-travel 250 mm Workpiece height mm Control CNC 314 ELESTA Total power requirement 15 kW Machine weight approx. 5,500 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Type S 3 – CNC 314 Year of manufacture: approx. 1990 # S 32086 _____ Table size approx. 600 x 380 mm Table load approx. 300 kg Table longitudinal travel max. (X) 400 mm Table cross travel max. (Y) 250 mm Grinding slide vertical adjustment max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head slide stroke, hydraulic 15 – 12,000 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Spindle overhang 350 mm Taper grinding max. 16° Max. grinding diameter of bore approx. 230 mm 18 spindle speeds depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary speed (C), continuously variable 5-250 rpm U-axis, radial infeed 6 mm Ppjdot Hxcnepfx Afasu Total drive approx. 15 kW - 400 V – 50 Hz Weight / Total weight approx. 4,000 / 5,500 kg Accessories / Special equipment: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor, for 4 axes (= X, Y, C + U axis), with circular and linear interpolation in 2½ dimensions (X, Y, + C). Teach-in programming directly at the machine. Error messages, RS 232 interface with various subprograms, as well as manual axis movement via the control panel or with electronic handwheel. • Separate digital readout for Z-axis, Z-axis with rapid traverse feature • Programmable C-axis for simple contours and pockets, radius grinding • U-axis as a manual and controlled radial infeed axis, mounted on the grinding head, with digital readout, enables automatic grinding of different bore diameters • 2 grinding motors up to 80,000 rpm spindle speed • Integrated acoustic grinding contact detector KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system Krafft Buer • Separate coolant system with band filter, separate hydraulics with cooler • Separate control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately no further accessories currently available. Condition: very good / demonstration-ready under power Delivery: ex-stock here – as inspected Payment: net – after receipt of invoice

Stanje: rabljeno, Leto izdelave: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm Total power requirement 40 kW Machine weight approx. 8 t Space requirement approx. m CNC-controlled vertical machining center for bar processing. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Type MC 530 SM Year of manufacture 1997, #530 1195 TECHNICAL DATA: Bar diameter / profile size x max. length: 60 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 400 mm Milling head travel vertical Z-axis: 350 mm Workpiece axis rotation/swivel: 360° / 120° Mounting height under vertical spindle approx.: 300 mm Spindle taper: HSK 63 Spindle speeds continuously variable: 36 – 10,500 rpm Feed rates, all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 14 to 32 kW Total drive: 40 kW - 380 V - 50 Hz Weight approx.: 8 t Ppjdpfx Afot Hwx Ijaju Accessories / Special equipment: CNC path control FANUC type 16 MB, for all 5 axes with monitor and direct input, various subprograms, tool corrections, tool monitoring, parallel programming, 3-D and helical interpolation, and much more. IRCO bar loading magazine mounted on the left of the machine, for up to 10 bars with a diameter of 60 mm. Mounted CNC rotary/swiveling unit with collet chuck system for holding bar stock in combination with hydraulic tailstock as counter support. Automatic tool magazine with 42 tool stations, Ø 100 x 200 mm length. Tools also with internal coolant (IKZ), with separate tool data management, chip-to-chip 4 sec. Tool breakage monitoring via laser light barrier, etc. Pneumatically retractable finished part catcher between workpiece head and tailstock; conveyor belt for parts removal without opening the work area. Fully enclosed work area, chip conveyor installed, but without coolant supply (central provision). Thread cutting possible without compensating chuck, no toolholders included. Very robust machine.

Stanje: rabljeno, Leto izdelave: 1994, Workpiece diameter: 110 mm Grinding length: 410 mm Clamping length: 20 mm Total power requirement: 0.25 kW Machine weight approx.: 500 kg Space requirement approx.: S A A C K E Manual Form Cutter – Bevel Grinding Machine for grinding form tools made of HSS and carbide profile cutters, etc. (see separate PDF) Model: FSM Year of manufacture: 1994 Serial no.: 172/94 --- Center height of workpiece carrier II approx.: 110 mm Collet chuck for end mills Ø: 0.5 – 30 mm Axial adjustment range of workpiece: 14 mm Template adjustment range: 20 mm Base table: 700 x 800 mm Tabletop height above floor (raised): 900 mm Pedst Hw Nmspfx Afajpu Grinding head: Grinding wheel Ø x bore: 175/125/75 x 51/32 mm Grinding wheel speed via pulley: 3,150-4,500-6,300 rpm Grinding head height adjustment approx.: 65 mm Adjustable clearance angle approx.: 0 – 45 ° Spindle drive/total drive: 0.25 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories / Special equipment: • Units such as the grinding head slide, workpiece carrier No. 2, and the dressing and setting block can be easily adjusted on an air cushion. All units can be operated or fixed separately via pneumatic valves; they are optimally adjustable for any grinding application due to their placement on a “planar air bearing.” • Workpiece holder A with collet chuck device • Separate workpiece holder B with steep taper 50 mounting, each for alternate installation on the workpiece carrier • Grinding wheel dressing block with diamond and setting gauge • Various collets, approx. 50 pieces in all sizes, other accessories Condition: good – ready for demonstration under power and air Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Control system SIEMENS SINUMERIC 840 C Total power requirement 40 kW Machine weight approx. 6,500 kg Space requirement approx. m I N D E X CNC lathe with 2 turrets, bar feeder and workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture 1998 #810 728 _____ Bar capacity approx. 42 mm Workpiece swing diameter approx. 400 mm Chuck diameter 200 mm Turning length / centre distance approx. 400 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 400 / 120 mm Turret slide travel Z2 (longitudinal) / X2 (cross) 400 / 105 mm Feed force for Z/X axis 15 Nm Rapid traverse speed, tool turret 1 & 2 22.5 m/min Turret tool stations / max. speed 14 x VDI 30 / 6,000 rpm Spindle speeds / tool speeds up to max. 7,000 rpm Maximum spindle torque 95 Nm Spindle drive / tool drive 20 / 5.5 kW Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis contouring control, type SINUMERIC 840 C, for the following axes: Turret 1 and Turret 2, C-axis, sub-spindle axis and C-axis sub-spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand-held control unit, • C-axis for main spindle as well as automatic spindle switching and alignment device, • 1 sub-spindle with drive and C-axis, travel approx. 300 mm Psdpfx Afst Hw Rkoaopu • INDEX bar loader type MBL for bars up to 3 m in length • Hydraulic collet clamping device on main and sub-spindle • 2 x tool turrets with 14 stations for VDI 30 tool mounting and 14 powered tool positions for milling and drilling operations, various tool holders, drill breakage detection in the chuck area, ideal for cross-drilling (!) • Workpiece handling system type WHU with linear gripper but without storage system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system, • Driven angular tools, approx. 20 pcs. in total, etc. Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Stanje: rabljeno, Leto izdelave: 1991, Turning diameter: 42 mm Turning length: 250 mm Control system Total power requirement: kW Machine weight approx.: t Space requirement approx.: m GILDEMEISTER Universal 8-axis CNC lathe with bar feeder Model: GAC 42 Year of manufacture: 1991 Serial No.: 5.1096 Bar diameter: 42 mm Chuck diameter: 140 mm Spindle bore: 56 mm Spindle speeds (485 Nm max.): 71 – 6,300 rpm The machine is equipped with: - 2 units of 2-axis side cross slides - 2 units of 1-axis side cutoff slides - 1 unit of 2-axis turret slide Turret slide traverse (X5/Z5): 40 / 274 mm Feed / rapid traverse: 5 / 15 m/min Feed force transverse / longitudinal: 600 / 1120 daN Podot Hwz Aspfx Afajpu Cross slide traverse (X3/Z3, X4/Z4): 70 / 164 mm Feed / rapid traverse: 5 / 8 m/min Cutoff slide traverse (X1, X2): 70 mm Feed / rapid traverse: 5 / 8 m/min Spindle drive: 18 kW Overall drive: approx. 25 kVA - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: - GILDEMEISTER 8-axis CNC path control EPL 2 with color display, electronic handwheel, and all standard options: graphics, cycles, subroutines, parallel programming, etc. - 4 CNC side slides (2 with traverse/longitudinal axes, 2 with traverse axis), equipped with presettable quick-change system, tool shank 20 mm (square) - Tool turret with 8 VDI 30 stations, 4 of which are driven for drilling, milling, tapping with powered tools - Rotating pick-off device (chuck diameter 80 mm) for rear-side machining, using a linear tool carrier mounted on the right bed side (max. 3 tools) - Hydraulic hollow clamping device with collet chuck - SAMECA hydrostatic bar feeder MONOSAM 45 - 2-circuit coolant system, BMF chip conveyor, lockable sliding door, various driven tool holders, operating manual, miscellaneous accessories Thanks to the combination of a powered tool turret, rear-side machining, and 4 CNC side slides, this machine offers outstanding flexibility! Condition: Good to very good – demonstration ready Delivery: Ex stock – as inspected Payment: Net cash – upon receipt of invoice We look forward to receiving your order. Further conventional and CNC lathes available from stock – please inquire for details.

Stanje: rabljeno, Leto izdelave: 1993, Wheel diameter – max. 330 mm Wheel width 180 mm Total power requirement: 12 kW Machine weight approx. 7,500 kg REISHAUER (Switzerland) CNC Gear Grinding Machine Model: RZ 301 AS* (*A = automatic threading) Pjdst Hwyfepfx Afajpu Year: 1993 # 71206 _____ Wheel diameter min./max.: 10 – 330 mm Module: 0.5 – 7 Helix angle: +/- 45° Slide stroke: 180 mm Max. number of teeth: 10 – 600 Workpiece clamping length: 420 to max. 620 mm Max. workpiece weight: 60 kg Grinding worm – width: 3 x 50 x 84 – 104 mm Grinding worm speed: 1,100 – 1,900 rpm Spindle drive: 4 kW – Total drive approx. 12 kW – 380 V – 50 Hz Total weight: approx. 7,500 kg Accessories / Special features A modern CNC control allows input of all relevant gearing data and dialog-assisted setup of the workpiece. Programming language switchable (German/English), and DNC interface for data import/export. The machine operates in continuous generating grinding mode with automatic grinding cycles and in-machine automatic dressing of the grinding wheel. Equipped with an automatic thread-in device for inserting the grinding wheel into the tooth gap – provides significant time savings, hydraulically swiveling. About 10 years ago, BURRI retrofitted the profiling axis (V-axis) electronically, resulting in higher accuracy, simpler profile correction, faster dressing. Currently, a REISHAUER dressing unit Type SP-DR with a profile diamond disk is installed. The workpiece swivel axis (A-axis) is also electronically controlled for fast, precise positioning and hydraulically clamped, allowing for quicker changeover and easier part loading. Thanks to the shift grinding feature, the workpiece is tangentially guided along the grinding wheel during machining, ensuring a consistently uniform grinding wheel profile is in mesh. DITTEL grinding wheel balancing unit Hydraulic workpiece clamping with external collet and tailstock in the workpiece carriage Complete working area enclosure with sliding doors and oil mist extraction No original coolant system included (central supply), but a separate grinding oil centrifuge is available Separate electrical and control cabinet, separate hydraulic unit in cabin, grinding wheel flanges

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Psdpfet Hw Dkox Afaspu Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: rabljeno, Manual turret lathe: GDW Type/Model: RD 250 Condition: Used Centre height: 125 mm Max. distance spindle nose – turret head: 400 mm Swing over bed: 260 mm Swing over cross slide: 128 mm Spindle nose DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MT 5 Collet capacity: 26 mm Infinitely variable up to: 60–3,000 rpm Regulated AC motor 100% duty cycle, 70 Hz: 4.6 kW Turret slide travel: 100 mm Cut-off slide travel: 90 mm Turret tool holder: 6 × 3/4" Length x width x height: approx. 1,300 × 700 × 1,400 mm Weight depending on equipment: approx. 520 kg Connected load: 9 kW Equipment: - Vibration-damped direct drive for the main spindle, steplessly controlled, with electromagnetic brake for spindle braking and spindle stop in emergency-off mode - 6-position slant-bed turret slide with Ø 3/4" holders - Infinitely variable feed rate adjustment - Turret slide with feed drive - Pneumatic collet chuck - Extensive set of collets Pedpozcb Ruefx Afajpu - Emergency-stop palm button - Coolant system - Spindle guard

Stanje: rabljeno, Leto izdelave: 2008, Tehnični podatki: Premer struženja: 410 mm Dolžina struženja: 500 mm Krmiljenje: Fanuc 21i TB Ppsdpfxozd Un Ie Afaeu Standardni premer struženja: 275 mm Pomik - x: 277 mm Pomik - y: 82 (±41) mm Pomik - z: 500 mm Vreteno 1 hitrost: 4500 1/min Vreteno 1 moč: 18,5/18,5/15 kW Vreteno 1 maks. premer materiala: 65 mm Revolver število postaj / pogonskih: 12/12 Moč pogonskih orodij: 5,5 kW Hitrost pogonskih orodij: 6000 1/min Skupna priključna moč: 39,2 kVA Teža stroja cca: 6,2 t Dimenzije stroja cca: 3,1 x 2,0 x 2,2 m Vpenjalna glava: Hainbuch Dodatna oprema: Transportni trak za ostružke Vmesnik za robota Visoko zmogljiv precizni stružni center z osjo Y in robotskim nalaganjem za obdelavo gredi. Visoko precizen Stäubli robot za nalaganje gredi. Odličen za obdelavo kompleksnih struženih delov z ekscentričnimi rezkalnimi operacijami.

Stanje: rabljeno, Leto izdelave: 2007, Tehnične podrobnosti: Premer struženja: 160 mm Dolžina struženja: 300 mm Krmiljenje: Siemens 840D Vreteno 1 moč: 22 kW Vreteno 1 hitrost: 5000 1/min Vreteno 1 maks. premer palice: 65 mm Vreteno 1 navor: 150 Nm Vreteno 2 moč: 16,8 kW Vreteno 2 hitrost: 5000 1/min Vreteno 2 navor: 100 Nm Prenosni hod 2. vretena: W2 = 690 mm Potrebni prostor pribl.: 4,5 x 2,0 x 2,3 m Teža stroja pribl.: 9 t Ppodezd Tcwepfx Afaju Dodatna oprema: Vreteno 1 vpenjalna puša Vreteno 2 vpenjalna puša Transporter za ostružke CNC stružni center s 3 revolverji, 2 vretni in notranjim dovodom hladilne tekočine za revolverje.

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Standardni premer struženja: 200 mm Dolžina struženja: max. 810 mm Krmiljenje: MSX-701 MAPPS III Premer vrtenja nad posteljo: 800 mm Maks. razdalja med konicama: 1130 mm Maks. premer struženja: 320 mm Maks. premer obdelovanca: 300 mm Premer palice: 65 mm Pomik X-os 1: 210 mm Pomik X-os 2: 210 mm Pomik X-os 3: 210 mm Pomik Y-os 1: 110 (+65/-45) mm Pomik Y-os 2: 110 (+45/-65) mm Pomik Z-os 1: 300 mm Pomik Z-os 3: 300 mm Pomik Z-os 2: 810 mm Pomik B-os: 870 mm Območje vrtljajev - vreteno: 5.000 1/min Število območij vrtljajev vretena: 2 Vreteno - priključek: JIS A2-6 Vreteno - izvrtina: 73 mm Premer ležajev vretena: 120 mm C-os: 0,001 ° Premer palice maks.: 65/52 mm Število revolverjev: 3 Število orodnih postaj: 16 x 3 = 48 pozicij Višina držala za kvadratno orodje: 20 mm Premer držala za vrtalne palice: 32 mm Revolverski menjalni čas (4 postaje): 0,18 s Število pogonjenih orodij: 16 x 3 = 48 pozicij Maks. hitrost pogonjenih orodij: 6.000 min⁻¹ Obdelovalna zmogljivost za rezkalno orodje: M16 / Ø16 Hitri pomik X-os: 30 m/min Hitri pomik Y-os: 20 m/min Hitri pomik Z-os: 50 m/min Moč pogona – glavno vreteno: 25 / 22 kW Moč pogona – pogonjena orodja: 7,5 / 5,5 kW Skupna priključna moč: 92,7 kVA Teža stroja ca.: 9,4 t Prostor: ca. 4,0 x 2,8 x 2,4 m Oprema: Transporter za odrezke Naprava za hlajenje C-os glavnega in protivretena 2 x Y-os Psdpozd Su Eofx Afajpu Števec kosov Skupni števec Meritev orodja Vzgornji grabilnik kosov s transportnim trakom Vreteno 1 – hitrovpenjalna glava SMW KNCS-N 210 / 52 mm Vreteno 2 – collet vpenjalo Hainbuch Spanntop nova Kombi Axfix 65 Robotski vmesnik Nalagali robot Lehmann z dovodnim in odvodnim trakom za gredne oblike NZ2000 T3Y2 ima 2 vretena in 3 revolverje. Dva revolverja sta opremljena s funkcijo Y-osi in vgrajenim rezkalnim motorjem, kar omogoča simultano obdelavo s tremi revolverji. Visoko zmogljivo in hitro obdelavo omogoča do 48 pogonjenih orodij. Za avtomatsko nalaganje je vključen robot podjetja Lehmann s transportnim trakom za gredaste obdelovance. Stroj je bil vzdrževan s strani lastnega vzdrževalnega oddelka in Mori Seiki. Stroj se lahko proda tudi brez robota.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 5.891 h, Funkcionalnost: popolnoma funkcionalen, CNC stružnica – cikelno vodena z revolverjem | Znamka: DMT Kern Tip: CD 322 | Leto izdelave: 2010 5 osi (X+Z+C-os, glavna vretena, gnano orodje) Stroj si je možno po predhodnem dogovoru ogledati pod napetostjo. Stroj je bil uporabljan izključno za namene usposabljanja. Stanje: popolnoma delujoč / vzdrževan / pripravljen za obratovanje. Delovne ure (19.06.2026): 5.891 TEHNIČNI PODATKI: Delovno območje: - Premer vrtenja nad ležiščem: 320 mm - Premer vrtenja nad suportom: 150 mm - Prehod suportne osi: 200 mm Konjiček: - Dolžina pomika vzdolžno: 750 mm Pogonski sistem glavnega vretena: - Moč: Digitalni AC motor – 50/60/100% ED: 16/15/12 kW - Število prestav: 2 Glavni nosilec vretena: - Vpenjalna glava DIN 55027 / vrtina: Gr. 6 / Ø 64 mm - Premer vretena v sprednjem ležaju: Ø 100 mm - Območje vrtljajev (V-konstantno): 1 – 3.000 obr/min - Standardne velikosti vpenjalnih glav: 200/250 mm Križni suport: - Podajalno območje prečno: 0,001 – 1.000 mm/obrat Ppsdpfezf Nktox Afaeu - Podajalno območje vzdolžno in navojna stopenja: 0,001 – 2.000 mm/obrat - Hitri pomik prečno: 5 m/min - Hitri pomik vzdolžno: 10 m/min - Sila pomika prečno: 5.000 N - Sila pomika vzdolžno: 7.000 N Reitstock (konjiček): - Premer izvlečene konice: Ø 60 mm - Hodi pinole: 140 mm - Stožec: MK 4 Električna napeljava: - Trifazni tok: 400 V, 50 Hz Dimenzije / Teža: - Stroj D/Š/V: 2,44 x 1,66 x 1,7 m - Krmilna omara D/Š/V: 1,2 x 0,5 x 1,7 m - Teža stroja: cca 2,1 t OPREMA / PRIBOR: - CNC krmiljenje: HEIDENHAIN MANUALplus 620 - Avtomatski 8-pozicijski revolver za orodje * Nosilec orodja DIN 69880, Ø 30 mm, nameščen zadaj na suportu, dodatno Multifix B spredaj * Nastavljivo število obratov pogona, max. 4.000 obr/min - C-os z vrtalnimi, rezkalnimi in gravirnimi cikli ter prosto ICP-vnosno možnostjo - Aksialni in radialni držali za gnano orodje: * Steblo po DIN 69880, Ø 30 mm * Z vpenjalnim vložkom DIN 6499, 430E * Obseg vpenjanja 1 – 16 mm - Vpenjalni vložki za nosilce z pogonom * Vpenjalni del DIN 69880, Ø 30 mm * Obseg vpenjanja 1 – 16 mm, v koraku 1 mm - 1 komplet nosilcev orodja DIN 69880, Ø 30 mm * 4 desni radialni nosilci * 1 desni radialni nosilec, nad glavo * Vsak po 1 držalo za vrtalno letev Ø 16/20/25 mm * 1 držalo za svedre MK 2 * 1 hitro vpenjalna vpenjalna glava Ø 1 – 13 mm * 4 zapiralni čepi - Vztrajna centrirna konica Mk 4 - Vodilo s kolesi za konjiček (za lažje premikanje konjička) - Kad za zbiranje olja - Pištola za čiščenje delovnega prostora - Črpalka za hladilno tekočino, s frekvenčno regulacijo (namesto standardne črpalke) * Ročno zvezno nastavljiva preko stikala na nadzorni plošči stroja od 1 bar/10 l/min – 4 bar/20 l/min - Oljni separator za čiščenje hladilne tekočine - Dvoja zaščitna vrata za ostružke - Posebna obloga, stroj desno popolnoma zaprt - Oljno-emulzijski megleni filter za odsesavanje iz delovnega prostora - Glavna ventilatorska regulacija motorja, temperaturno vodena - Delovni način 4 "sledenje procesom" za 5 osi (X+Z+C-os, glavna vretena, gnano orodje) - Sistem za dovajanje hladilne tekočine, moč črpalke 1 bar, 8 l/min - Kad za ostružke - Zavora na glavni vreteni za menjavo vpenjalne glave / čeljusti - Aksialni omejevalnik v glavni vreteni - Vpenjalna naprava za jeklene vpenjalne vložke * max. 4.000 obr/min * Vpenjalna glava DIN 55027, Gr. 5, vpenjalni razpon: Ø 3 – 42 mm - Dokumentacija - CE oznaka Brez jamstva za popolnost in točnost tehničnih podatkov in opreme. - Prodaja vmes pridržana -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Mori Seiki NL2500Y/700 CNC stružnica Leto izdelave: 2007 Krmilnik: MORI MSX-850 III Glavno vreteno: Vretenovski nos: A2-8 Pogon glavnega vretena: 18,5 kW Največja hitrost glavnega vretena: 4000 min⁻¹ Največji premer izvrtine vretena: 80 mm Maks. premer obdelave: 366 mm C-os: 0,001° REVOLVERSKA GLAVA: Število pozicij: 12 Število pozicij za gnana orodja: 12 Minimalni zasuk revolverske glave: 0,001° Hoda osi X/Z: 280 / 785 mm Hod osi Y: ±50 mm Največja hitrost gnanih orodij: 6000 min⁻¹ Moč gnanih orodij: 5,5 kW KONICA: Stožec: MT5 Razdalja med konicama: 705 mm ELEKTRIČNI PRIKLOP: Skupna priključna moč: 39 kVA TEŽA IN DIMENZIJE: Zahtevani prostor: 3800 x 2143 mm Ppodpfsyxpprsx Afaju Višina stroja: 2232 mm Teža stroja: 6100 kg Pribor/možnosti: - 2 omari za pribor - 5 gnanih nosilcev orodij, več stoječih nosilcev - napenjalne puše, vstavki, orodja, tulec itd. - visokotlačni papirni tračni filter, mikro filtracija, rezervoar za hladilno sredstvo - transportni trak za odrezke - vpenjalni tulec različnih dimenzij - Kitagawa hidravlična 3-čeljustna glava, premer 210 mm - Komplet dokumentacije - Lovilec obdelovancev Pod napetostjo v našem skladišču. Video na zahtevo!

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B univerzalni stružnica z vodilnim in povlečnim vretenom, letnik 1992 s 3-osnim digitalnim merilnim sistemom K&C, NOV iz učilnice! Tehnični podatki: >> Letnik izdelave: 1992, serijska št.: 92-160-2994 Ppodpfxjzd Tyco Afaju >> Višina konic: 160 mm >> Razdalja med konicama: 650 mm >> Območje vrtljajev vretena: 24–2500 min⁻¹ >> Prehod skozi vreteno: 40 mm >> Glava vretena s kratkim stožcem po DIN 55027, velikost 5 z bajonet zaklepom >> Konjiček MK 3 >> Pomiki: 0,02–0,63 mm/obrat >> Možne navoje: metrični, colski, modulni in diametral pitch >> Metrični navoj: stopnje 0,25–8 mm >> Masa: ca. 680 kg >> Vklopna zavoro vretena >> Dimenzije: dolžina 1,6 m, višina 1,25 m, globina 0,7 m Oprema in dodatki: >> 3-osni digitalni merilni sistem K&C z navodili za uporabo Funkcije: preklop mm/inch, izbira koordinat ABS/INC, polovičenje prikaza, referenčna točka, programiranje orodij (200 položajev), izračun konusa, prikaz radij/premer, hitra ničla, obračanje smeri štetja >> 3-čeljustna vpenjalna glava 160 mm z enim kompletom čeljusti >> Sistem za vpenjanje orodja z 2 držali >> Dolgostopenjsko omejevalo ležišča >> Centrirni špic >> Naprava za hlajenje >> Zadnja zaščitna stena >> Nogi stroja >> Elektronska zaščita vretena >> Navodila za uporabo Za doplačilo so na voljo: napenjalne puše, 4-čeljustna vpenjalna glava, lunete in dodatna oprema. Za varnost: elektronska zaščita vretena, zaščita vodilnega in povlečnega vretena, 2 nujna izklopa, zavora vretena, elektronska zaščita vrat menjalnega pogoja. Opis stroja: V ponudbi je Weiler Praktikant 160 B univerzalni stružnica z vodilnim in povlečnim vretenom v zelo dobrem stanju. Vsi vozi so zelo gladki in enakomerni. Tudi pri visokih obratih Weiler teče mirno. Nova generacija Weiler stružnic je zelo prijazna do uporabnika in omogoča doseganje brušenih površin. Izkoristite možnost osebnega ogleda te stroja pod napetostjo in se prepričajte o njenem stanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, - Krmilni sistem Siemens Sinumerik 828D - Pribor: vpenjalna kleščna glava Delovno območje Premer vrtenja nad ležiščem: ø250 mm Premer vrtenja nad prečnim suportom: ø85 mm Največji stružni premer: ø85 mm Največja stružna dolžina: 225 mm Največji prehod palice: ø25,5 mm Razdalja med konicama (vreteno – konica konjička): 405 mm Pomik suportov Pomik X: 100 mm Pomik Z: 300 mm Glavno vreteno Psdozdp U Aspfx Afaopu Priključek vretena (centrični rob): ø70 h5 Zunanji premer vretena na prednjem ležaju: ø50 mm Sistem vpenjanja glavnega vretena Votli vpenjalni cilinder (pnevm.) s potisno cevjo, največji prehod: ø25,5 mm Največja velikost vpenjalne glave: ø100 mm Pogon glavnega vretena AC-motor, moč (100%/40% ED) z integrirano zavoro za pogonjena orodja: 3,7 / 5,5 kW Območje vrtljajev (brezstopenjsko nastavljivo): 60–6300 obr./min. Največji navor: 35 Nm Dimenzije Višina rotacijske osi nad tlemi: 1130 mm Skupna višina: 1820 mm Tloris (B x D, brez opcij): 1700 x 1270 mm Teža: 1400 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a pre-owned color production system "Xerox Versant 280 Press" Scope of delivery: 1 x Xerox Versant 280 Press with the following equipment: Pedpfsyludmsx Afajpu - incl. E300 Controller - incl. Paper Deck A-CF03 - incl. Booklet Finisher A-FN13 Not the right configuration? No problem – we can customize the machine according to your requirements. Please feel free to contact us! Meter readings: - Total: approx. 557,431 pages - Color: approx. 430,279 pages - Black: approx. 127,152 pages Condition: This offer is for a used machine, which may show signs of use (such as minor scratches or yellowing). The machine has been functionally tested. A test printout can be seen in the photos. Packaging and shipping: You are welcome to view the machine during our business hours – please arrange an appointment in advance! Seaworthy packaging and worldwide shipping available upon request! Before shipping or collection, a functional test will be recorded on video for you. For more information, please feel free to contact us personally.