Brugger Štepilec Hlodov, Avtomatski Predelovalec Drv nakup rabljenega (3.179)

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Lasdpfxsfb Nbfs Al Nja Cutting dimensions flat: 300 x 260 mm Saw band dimensions: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTIONAL PRICE!!!! 2-column high-performance bandsaw automats from the SBS series The SBS series impresses with sophisticated engineering, high quality, durability, and an unrivalled, comprehensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping force • Double vice (in front and behind the band) • Creep mode for positioning • Electrical and hydraulic bundle clamping preparation • Chip conveyor The SNC 20 control enables convenient and straightforward programming of up to 20 different sawing operations (length and quantity). When the target dimension is entered, the control system automatically calculates the saw kerf and the number of feed cycles. In addition, the error code display system allows for quick fault diagnosis and troubleshooting.

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 – 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Ledpfefb Nbgsx Al Neaa Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series impresses with proven technology, superior quality, durability, and an unrivalled range of standard features. • Modern SNC 20 control system (CNC version) • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double clamping vice (in front of and behind the band) • Creep speed for positioning • Electrically and hydraulically pre-equipped bundle clamping • Swarf conveyor The SNC 20 control system allows for convenient and straightforward programming of up to 20 different sawing tasks (length and quantity). When entering the desired length, the control system automatically calculates cut loss and the number of feed strokes required. The error code display system also enables quick error analysis and troubleshooting.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series stands out for its advanced technology, high quality, durability, and an exceptionally extensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Jog mode for positioning • Bundle clamping, electrically and hydraulically prepared Laodpfjfg E Hvsx Al Noa • Chip conveyor The SNC 20 control enables easy and intuitive input of up to 20 different sawing jobs (length and quantity). Upon entering the required dimensions, the control automatically calculates the saw kerf and the number of feed cycles. Additionally, the error code display system provides rapid fault analysis and troubleshooting.

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Laedpfx Aefu Nbbol Nea Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. Ljdpefgyifjfx Al Nsaa The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Ledjfgyigjpfx Al Neaa Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control Lajdpfx Asfg E Hmsl Nea A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Lasdpsfg E Hnefx Al Nsa Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, which ensure extremely smooth rotation. CNC control A CNC control enables programming of up to 90 cutting programs with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total connected load: 2.2 kW Machine weight approx. 0.99 t Lasdpjd Iiprsfx Al Nea Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet operation with minimal vibration • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Laodpfx Aled Iip Ao Nja Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Takoj na voljo na lokaciji: Popolnoma avtomatski rezkalni stroj Busch Tip NF 8/32 Letnik 1986 Širina utora do 32 mm Dolžina obdelave do 6100 mm Laodpfx Aljy Emcij Nea Avtomatski pomik materiala Avtomatski podajalnik Pogon 5,5 kW Dodatna oprema: podporne mize Vpenjala, rezkarji Hladilna naprava Digitalni prikaz Teža 4 t Cena: 3.000 € + DDV, iz lokacije

Stanje: zelo dobro (rabljeno), Opportunity! From previous federal ownership, we can offer you this top-maintained "Genesis RSP 100/8" liquid handling system from the world-leading brand TECAN as a complete system with all accessories and from first ownership. The fully automatic pipetting robot system Genesis RSP 100/8 is among the most reliable systems available and has become indispensable in modern laboratories. All components are in excellent maintained condition; the system was never used in industrial operations and has only seen light use. All devices are in outstanding visual and technical condition with no significant damage – see photos. Thanks to the extensive accessories, you receive a complete turnkey system ready for immediate use. Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf PCR Mastercycler Gradient - Olympus DP10 Digital Microframe Camera for droplet size monitoring - GeSim 1.2 Nanoplotter with enclosure - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in assorted sizes (2 cartons with approx. 10,000 pcs) Dimensions (D)x(H)x(W): 78 x 94 x 106 cm Weight: approx. 145 kg Shipping will be carried out insured via freight forwarder within three working days of receipt of payment – alternatively, you may choose to collect the system during regular business hours. The total weight of the system including accessories and 2 pallets is approx. 250 kg! This offer is directed exclusively at businesses; you will of course receive an invoice with VAT shown separately. Private buyers may be able to acquire the device “on behalf of a customer”; a direct commercial sale to private buyers is expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to compensation claims arising from grossly negligent or intentional breaches of duty by the seller, nor to any injury to life, limb, or health. Lsdpfx Ajwltr Rjl Noaa For price or technical inquiries, please feel free to contact us using the provided address.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, največja širina izdelka: 400 mm, vhodna napetost: 230 V, Minipack Pratika 80 MPS Minipack Pratika 80 MPS je popolnoma avtomatski pakirni stroj s stranskim varjenjem. Namenjen je izdelkom z največjo višino 360 mm in je primeren tudi za zelo dolge izdelke. – Popolnoma avtomatski stroj za pakiranje s stranskim varjenjem (neprekinjeno stransko varjenje) – Največja višina izdelka: 360 mm – Možne dolžine izdelkov nad 2 m – Uporaben dimenzija varilne letve: 700 mm – Največje dimenzije rolice folije: Ø 350 × 800 mm – Višina vstopnega traku: 915 mm – Dimenzije stroja (zaprt): 2.785 × 940 × 1.770 mm – Dimenzije stroja (odprt): 2.785 × 940 × 2.280 mm – Zmogljivost: do 3.000 paketov/h (odvisno od izdelka/folije) Lajdpfx Alsyant Rs Noa

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.893 mm, skupna višina: 1.585 mm, skupna širina: 1.240 mm, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, višina izdelka (maks.): 240 mm, največja dolžina izdelka: 600 mm, največja širina izdelka: 400 mm, vhodna napetost: 230 V, Pratika 56 MPE X2 Pri Minipack Pratika MPE X2 gre za večkrat preizkušen, popolnoma avtomatiziran stroj za izdelavo embalaže iz skrčljive folije. Stroj je zelo vsestransko uporaben in enostaven za upravljanje, zato je primeren za širok spekter izdelkov v živilskem in neživilskem sektorju. • Popolnoma avtomatski kotni varilec s brezkrtačnimi motorji in sodobnim PLC krmiljenjem s 7” barvnim zaslonom • Enostavno upravljanje • Shranjevanje do 128 receptov, vključno s sliko izdelka • Hitre menjave izdelkov • Do 3.600 kosov na uro • Udobne in hitre menjave izdelkov • Največje dimenzije izdelka: 600 x 400 x 240 mm Lasdpfex Tp H Tox Al Nja • Dimenzije stroja: 2.480 x 1.240 x 1.675 mm • Ni potrebe po stisnjenem zraku! • Vrata na obeh straneh stroja • Osvetljen notranji prostor stroja

Stanje: dober (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6603, Bruderer BSTA 25 (1983) – Naprodaj Dobro vzdrževan Bruderer BSTA 25 iz leta 1985 v dobrem stanju. Stroj je popolnoma funkcionalen in pripravljen za takojšnjo uporabo. Ljdoxawcgspfx Al Noaa Na voljo takoj, možen preizkus v Boxtelu na Nizozemskem.

Stanje: dober (rabljeno), Leto izdelave: 1985, Bruderer BSTA 25 (1985) – Naprodaj Dobro vzdrževan Bruderer BSTA 25 iz leta 1985, v dobrem stanju. Stroj je popolnoma delujoč in pripravljen za takojšnjo uporabo. Na voljo takoj, možen preizkus v Boxtelu na Nizozemskem. Laodoxamv Aepfx Al Noa

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Offered here is a pre-owned fully automatic carton erector AS-500 with two carton magazines (see photos positions 3 + 4) from Knecht (Smurfit Kappa group). The system has already been dismantled and can be loaded on a truck at site. Inspection of the unit is possible. The equipment is in very good condition and has been regularly maintained. It is being sold due to business closure. The system is configured for the packaging of automotive rims, but with modifications it can be adapted for other types of products as well. A video demonstration of the packaging line and a detailed technical manual are available upon request. Technical data: - For cartons according to Fefco 0200/0201 - Bottom closure with hot-melt glue - Two carton magazines (pallet-fed), each with a lifting device Pallet loading via hand pallet truck - Carton picking via vacuum suction cups - Hot-melt glue station (four glue strips for bottom gluing) - Control: ELAU C-400 - Operation via touch panel MP 277 - Output: 8 cartons/minute Lasdpfx Aljyzdmde Noa Carton sizes: Length: 400–650 mm Width: 400–650 mm Height: 150–500 mm (Size range can be adjusted in cooperation with the manufacturer) Additional components from the same Knecht packaging line are also available (see pictures). The following subsystems are still for sale: 5. Carton sealer VS-500 from Smurfit Kappa

Stanje: rabljeno, Leto izdelave: 2012, Prečni verižni transporter, 4 elementi, dolžina 6 m. Nakladalne zibke za hlode z bielami za posamezno podajanje, 4 elementi Olupljalnik z mobilno rezkalno enoto in mehanskim krakom, min./maks. dolžina hloda 1000/6000 mm, min./maks. premer hloda 200/1100 mm Transportna veriga s ploščicami za odvajanje odpadkov, širina 600 mm, dolžina 10 m v vzponu Nameščena moč: 35,2 kW Laedsyappaopfx Al Nea Poraba stisnjenega zraka: 100 NL/min Širina rezkalnika: 300 mm

Leto izdelave: 2025, stanje: rabljeno, Ponujamo ta rabljen avtomatski dvoglavi stroj za rezanje PVC/alu M.S.K. OMRM 133 OMRM133, premer 550 cm, letnik 2025. Model: OMRM 133 Serijska številka: 25DCM330004 Datum proizvodnje: 2025 Moč: 6,5 kW Lajdpfx Aoy Encwjl Nja Napetost: 400 V Frekvenca: 50 Hz Tok: 32 A Zračni tlak: 6-8 bar Poraba zraka: 95 l/min Teža: 1220 kg Širina: 1985 mm Dolžina: 8110 mm Višina: 1895 mm Država porekla: TURČIJA Če imate vprašanja ali želite več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1997, Teža pribl. 4.000 kg Krmiljenje Sütron BT20 Ledpfx Alolf H Sqo Noaa Število vreten: 4 kos Avtomatski stroj za preoblikovanje WEINIG UNIVAR 10 iz UC-Matic linije za okna, brez funkcije. - Stroj ni popoln - Podrobnosti na zahtevo - Slika podobna.

Leto izdelave: 2007, stanje: rabljeno, Leto izdelave: 2007 Stanje: dobro, funkcionalno Kolbus DA 260 - avtomatski stroj za izdelavo platnic Tehnične specifikacije: - maksimalna dimenzija odprtega ovitka - 670 × 390 mm - minimalna dimenzija odprtega ovitka - 205 × 140 mm - širina spoja (joint width) - 4 – 15 mm - širina med platnicama - 14 – 120 mm - zaprta širina ovitka - 8 – 15 mm - širina prevlečnega materiala/papirja - 223 – 708 mm - višina prevlečnega materiala/papirja - 130 – 428 mm Ledpoylk Rpofx Al Njaa - debelina platnic - 1 – 4 mm - širina platnice - 95 – 328 mm - višina platnice - 140 – 390 mm - debelina lepenkastega traku v sredini - 1 – 4 mm - širina sredinskega traku platnice - 6 – 90 mm - debelina traku v roli - 0,3 – 0,6 mm Uporaba: Stroj Kolbus DA 260 je idealen za izdelavo knjig, vrhunske vezave, predstavitvene izdelke in specializirane embalaže. Njegova zanesljivost in natančnost zagotavljata visoko kakovost ter minimalne materialne odpadke pri kontinuiranem delovanju.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, Na prodajo je sistem za samodejno nalaganje in razkladanje pločevin Mazak EMC 3015, Extensible Manufacturing Cell. Cena novega je približno 130 tisoč EUR. Sistem je praktično kot nov. Uporabljal se je skupaj s strojem z delovanjem 2000 ur in še to občasno. Letnik proizvodnje 2016. Visok model (High Column type), združljiv z naslednjimi Mazak stroji: Optiplex, Optiplex Nexus, SpaceGear, Optiplex NEO. Lajdpfsyh N Rdex Al Noa Največja dimenzija pločevine: 3000x1500 mm Največja teža pločevine: 900 kg Razkladalna postaja: max 2000 kg Sistem upravljanja čakalne vrste za nalaganje pločevin. Collimator Group nudi celovite storitve za laserske stroje Mazak – od servisa do prodaje. Če vas zanima drug model ali imate drugačen proračun, kontaktirajte nas.

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 35.500 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, CNC avtomatski stružni stroj za dolge obdelovance Laedpfx Aleyu Nqys Nsa Znamka: STAR Tip: SV-32 Leto izdelave: 11/2013 z: upravljanjem FANUC 16i TB Obdelava zadnje strani Synchronized vreteno Revolver Pogonsko orodje Os C Visokotlačna črpalka Protipožarni sistem Transporter za ostružke Magazin za podajanje palic FMB TURBO 3-36

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1002650004, skupna višina: 3.170 mm, nastavitev hidravličnega cilindra: 60 mm, vgradna višina: 270 mm, višina mize: 1.300 mm, skupna širina: 2.875 mm, skupna dolžina: 2.875 mm, prebojna odprtina v mizi: 150 mm, dolžina mize: 1.250 mm, širina mize: 550 mm, stiskalna sila: 50 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 1.800 mm, širina krmilne omare: 600 mm, nastavitev hoda: 60 mm, razmak između stupova: 1.290 mm, delovna širina: 1.250 mm, razdalja med stranskimi nosilci: 260 mm, razdalja med stojali: 1.690 mm, skupna masa: 9.900 kg, prebijalna sila: 50 t, RASTER izsekovalni stroj RST 500-1250 DH z zvočno izolacijsko kabino in nadzorom orodij Stroj je v dobrem stanju Število gibov: 50 - 800 1/min Lodpoyyvgtefx Al Nsaa Uporaba stroja v enojni izmeni Možen ogled stroja pod napetostjo Cena na povpraševanje

Stanje: rabljeno, Leto izdelave: 2005, Delovna širina: 180 mm Delovna višina: 110 mm Število delovnih vreten: 4 Razporeditev vreten: spodaj, desno, levo, zgoraj Moč motorja spodnjega in zgornjega vretena: 7,5 kW Moč motorja desnega in levega vretena: 7,5 kW Nastavitev spodnjega vretena: - Nastavitev desnega vretena: - Nastavitev levega vretena: ročni volan Nastavitev zgornjega vretena: ročni volan Skobelni glavi spodaj in zgoraj: Centrolock Skobelni glavi levo in desno: Centrolock v kombinaciji s profilirno možnostjo Lodpeyq R Aiofx Al Njaa Hitrost podajanja: 2 Pritisk podajalnih valjev: vzmet Poraba toka: 32,8 A Priključek za odsesavanje: Dolžina stroja: Širina stroja: Teža: