Wöhler Brush Tech Gmbh Drahtverarbeitung / Wire Processing nakup rabljenega (85.257)

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW *Dimensions: - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring Njdpfx Aog Ewwroltsld - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg Njdpfx Aoyzz Irolteld INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5 Njdpfx Asu Hl R Toltold

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), številka stroja/vozila: 520511, Features: → Robust cast machine housing → Automatic load application and removal of test force → Automatic changeover between objective lens and indenter → LED illumination Nedpfoc Ipcksx Alteld → Digital measuring eyepiece → LCD colour touch screen display → Conversion to other hardness scales (e.g. HRC/HB) → Easy operation Technical data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Test method according to Vickers → Cross table 110 x 110 mm / travel distance 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness tester → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONS → VMS3 software (video measurement system) → Digital inbuilt micrometer (for transmitting the edge distance to the VMS software) → "Automatic measurement" module (only in conjunction with VMS3 software) → PC system / monitor

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 530211, Features → Robust cast iron machine housing → Automatic application and release of test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC) → Easy operation Technical Specifications → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Testing method: Vickers → Eyepiece 10X → Automatic objective turret → Objectives 10X / 20X / 40X → Test force application speed 50µm/sec → Maximum specimen height 210mm → Maximum specimen depth 160mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Scope of Delivery → Hardness tester → Diamond indenter 136° Vickers → Flat test table Ø80mm → Prism support Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED illumination → Power cable → Accessory case → Operating manual Optional Nljdpfxec Ipc Uj Altod → VMS3 software (video measuring system) → Cross table 200x200mm (travel range 25 x 25mm) → Digital built-in micrometer (for transmitting edge distance to the VMS3 software) → Module "Automatic Measurement" (only in conjunction with VMS3 software) → PC system / monitor

Leto izdelave: 2023, stanje: novo, - modern ergonomic design - manual testing sequence with analog dial gauge (reading accuracy 0.2 HR units) - easy operation and fast testing procedure - test chamber height approx. 185 mm - test chamber depth approx. 160 mm - dimensions 545x182x755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA/HRB/HRC Standard scope of delivery: - hardness tester Nlodpfspbbc Hex Alted - prism support - flat test table Ø150 mm - flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - spindle guard - accessory case

Leto izdelave: 2015, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, skupna dolžina: 13.000 mm, skupna širina: 4.520 mm, skupna višina: 2.550 mm, številka stroja/vozila: 201507-025, REZALNIK Z VODNIM CUREKOM & LEPILNA POSTAJA: Naprava je del večje proizvodne linije, oglejte si tudi naše druge oglase. Na ponujeni napravi so bile EPS-/XPS-surove plošče (ročna polnitev v zalogovnik) na čelni strani lepljene v neskončni trak, nato je sledila formatizacija z rezalnikom na vodni curek, vključno z izrezi in utornim rezkanjem. Iztiskalna postaja in tračni transporter na koncu naprave sta prav tako vključena v ponudbo. DIMENZIJE SUROVINE: Dolžina: 1500 mm - 2500 mm Širina: 600 mm - 1250 mm Višina: 20 mm - 50 mm REZALNIK Z VODNIM CUREKOM: Nlsdpfxoytp U Aj Altjd cut Expert variojet (proizvajalec: expert international GmbH, prej expert systemtechnik GmbH) VKLJUČUJE: Lepilni agregat (Nordson), rezkalno vreteno (Jäger)

Leto izdelave: 2017, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AU170124-01, PREVIOUS APPLICATION: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Travelling gantry with synchronized drive Vacuum lifting beam with automatically controlled suction rows, switching on/off depending on the component length Vacuum generator Schmalz with area gripper Clamping cartridges adjacent to the suction cups ensure vacuum activation Z-axis lifting movement of the suction frame via scissor guides Z-axis with asynchronous motor, MoviDrive frequency inverter, belt drive Interfaces to upstream and downstream stations Nledpfx Ajytphisltod Siemens S7-300 control system CONTROL CABINET: Power supply, power and control section with main switch, power supply unit, motor protection switches, circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of one CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet connection, required digital input and output cards, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WT 1104, skupna višina: 3.421 mm, skupna širina: 4.704 mm, skupna dolžina: 9.550 mm, nosilnost: 200 kg, gradbena višina: 3.421 mm, Vacuum Turning Gantry for Panels The turning unit offers two different "automatic" operating modes: I. Transfer without rotation The panel is shifted sideways, aligned to the reference edge (zero line) of the machining center, and indexed further to the machining center (BAZ). II. Transfer with rotation The panel is shifted sideways and rotated along its longitudinal axis before being indexed to the machining center (BAZ). Each function can also be operated manually in "hand" mode. SPECIFICATIONS: Maximum panel size: L x W x H: 8000mm x 2500mm x 100mm Maximum weight: 200kg Minimum panel size: L x W x H: 1500mm x 1500mm x 12mm The turning gantry is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the elements. The elements are always picked up using vacuum and then either transferred horizontally to the zero line of the machining center or additionally rotated by 180° while in transit before being placed at the reference edge. Rotation is monitored via absolute encoders; cross-travel positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm (width), with roller diameter Ø 108 mm, is fitted with material-friendly rubber rings; it is powered by a SEW geared motor. The roller table is controlled via a frequency inverter, speed v=45 m/min, freely adjustable. GENERAL INFORMATION: The entire area is fenced off, with two sliding doors securing the longitudinal side of the system. The doors are monitored for safety. The operator panel with a 12" touchscreen is installed in the fenced area. The installed PLC S7-1500 is programmed with three operational levels: • Automatic mode • Manual mode • Maintenance mode Input signals, feed side: - Start roller table - Turn yes/no - Emergency stop (entire system) Input signals, discharge side: - Start roller table - Emergency stop (entire system) Output signals, system: - Emergency stop (entire system) - Part received Nlsdpfx Aloyta R Ustjd

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: nepreverjeno, številka stroja/vozila: SK03UT6P0097 / SK01TMFY3097, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, year of manufacture 2023, with a new price of €100,000. Its key feature is the ability to digitize components without having to place targets on the part itself. This is made possible because targets are already integrated into the laser scanner housing and are detected by the tracker unit. This measuring device is especially well-suited for rapid digitization of large components, several meters in size, while maintaining a comparatively high level of accuracy. The device was calibrated upon delivery in an ISO 17025 accredited laboratory. We recommend having the manufacturer recalibrate the system upon transfer of ownership. The scanning software is included in the offer. Optionally, a touch probe for tactile point measurement on objects and a laptop are also available. Nodpfsw Id E Esx Altold Example application areas include: - Digitizing manufactured components for subsequent dimensional analysis, e.g., as part of first article inspection - Digitizing objects or spare parts for downstream reverse engineering, such as producing a replacement part or making design modifications - Digitizing large machinery and spatial areas for planning and simulation purposes - Digitizing vehicles for tuning and customization applications Technical specification: - 3 laser modes - Scan rate: up to 2,600,000 measurements/sec - Volumetric accuracy: - At 10.4 cubic meters: up to 0.049 mm - At 28.6 cubic meters: up to 0.067 mm - At 49.0 cubic meters: up to 0.089 mm - Recommended component size: 0.1 m – 12 m - Weight of complete tracker case: 37 kg - Weight of complete scanner case: 21 kg - Weight of tracker unit: 6.8 kg - Weight of scanner unit: 1.75 kg The device can be demonstrated under power.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420 Nledpfjud H Dmex Altsd  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Brizgalne stroje neposredno od proizvajalca! Kot proizvajalec KraussMaffei vam tukaj ponujamo naše preizkušene in prilagodljive stroje iz zaloge: Serija CX, v celoti hidravlična, ponuja izjemno kompaktne, učinkovite in prilagodljive stroje z dvema ploščama. Zelo kompaktna zasnova z dvema ploščama in samozapornim sistemom omogoča veliko prostora za periferno opremo in optimalen dostop. Učinkovito in inteligentno upravljanje z energijo s sistemom BluePower servo pogona zagotavlja zmogljivo osnovo za najvišje zahteve in pravo rešitev za vsako uporabo. TEHNIČNI PODATKI: KM 80 / 380 CX G06 (naročilo 38655610) NADZOR Nedpfx Aoud N Hdoltold  MC 6 z 21,5-palčnim barvnim zaslonom TFT z večfunkcijsko funkcijo na dotik ZAPORNIK  Sila zapiranja kN 800  Sila odpiranja matrice, maks. kN 55  Svetla razdalja (v x š) mm 470 x 420  Plošča za pritrditev (v x š) mm 670 x 670  Minimalna/maksimalna višina vgradnje matrice mm 400 (povečano za 150 mm)  Razdalja med ploščami mm 900 (povečano za 150 mm)  Maksimalna pot odpiranja matrice mm 500  Pogon izmetalca hidravlični  Hod izmetalca mm 150  Sila izmetalca naprej/nazaj kN 22,6 / 9,8  Hitrost izmetalca naprej/nazaj mm/s 760 / 800  Maksimalna teža matrice kg 1000 INJEKCIJSKA ENOTA  Premer/tip vijačnice mm 30 / standard (prilagoditev je možna)  Učinkovito razmerje L/D 26,7  Injekcijski tlak bar 2500  Volumenski pretok cm³ 113  Teža vbrizga pri maks. volumenu za PS g 103  Hitrost vbrizgavanja mm/s 100  Pretok vbrizgavanja cm³/s 71  Pogon vijačnice / hitrost 1/min 295  Pretok plastifikacije (standard) g/s 12,3  Sila na šobi kN 50 ELEKTRIČNI PARAMETRI  Priključna moč kW 15,0  Vgrajena moč gretja kW 10,9  Napajanje V / Hz 380 / 50 3 faze z nevtralnim vodnikom TEŽA IN DIMENZIJE  Neto teža s krmilno omarico t 3,55  Dolžina x širina x višina m 3,96 x 1,48 x 2,02 DODATNA OPREMA  Plastifikacija z nizko obrabo  Celotna izolacija plastifikacijskega cilindra BluePower  Odprta šoba  1 dodatna temperaturna regulacija za gretje šobe  Zračni ventil 1 – kanalni (BWAP)  Pnevmatsko upravljanje zapornice vročega kanala 1 - kanalno  Hidravlični izvleček jedra 1 - kanalni (BWAP)  Vmesniki Euromap za obdelavo E18, E63  Vmesnik Euromap (osrednji računalnik) E67, E77  Adaptivni nadzor procesa (APC)  Vezje za brizgano tiskanje  Grafični analitični paket Stroj se nahaja v našem obratu v Parsdorfu in je na voljo v kratkem roku. Dodatne možnosti vam lahko ponudimo na zahtevo. Veselimo se vaše ponudbe.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 Njdpfouggb Dsx Altsld INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. Nlsdpfsw U N Ixsx Altsd TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood Nodpfjy Aa Ugox Altjld - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 80 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 60 mm, Popolnoma primeren za: uporabo v modelarstvu in izdelavi orodij, pa tudi za rezkanje drugih materialov – univerzalni zmogljiv stroj s hitrimi pomiki do 80 m/min Nljdpfjx S Eqljx Alted Materiali: plastike, kompoziti kot so CFK/GFK, modelarski materiali, aluminij Panoge: avtomobilska industrija, letalstvo, promet in logistika, prostočasna industrija, sanitarna tehnika, ladjedelništvo, avtomatizacija _____ Referenčna številka: 1210 Razpoložljivost: takoj Tip CNC stroja: 5-osni CNC obdelovalni center G-S-F/UNI (35-15) Podatki o vretenu: 13 kW / 10,3 Nm; 12000-24000 obr/min; HSK F 63 Hitro pomikanje X/Y/Z: 80/80/60 Dimenzije obdelovanca X/Y/Z: 3500 x 1500 x 700 Krmiljenje: SIEMENS – Sinumerik One z ročnim terminalom HT 2 Izmenjevalec orodij: 10 orodij Mize: 1 miza Vakuumski sistem: da Kontrola zloma in dolžine orodja: Renishaw-TS 27 R Drugo: na zahtevo Leto izdelave: 2025 Stanje: novo

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 36.000 obr/min, hitrost vretena (min.): 12.000 obr/min, CNC stroji znamke HG GRIMME SysTech Popolni za: Zelo učinkovito 3D rezkanje majhnih obdelovancev – natančno rezkanje z visokim izmetom delov Materiali: Plastika, kompoziti kot so CFK / GFK, modelarska gradiva, aluminij Panoge: Avtomobilska industrija, letalstvo, promet in logistika, industrija prostega časa, sanitarije, gradnja čolnov, avtomatizacija Razpoložljivost: januar 2026 Nljdex S Etmspfx Altsd Model: 5-osni CNC rezkalni stroj RT-F 1400 Podatki o vretenu: 8 kW / 6,4 Nm; 1000-36000 1/min; HSK E 40 Hitri pomik X/Y/Z: 40/40/30 Mere obdelovanca X/Y/Z: 1000 x 800 x 400 Krmiljenje: Fanuc z IPC, ročni terminal HMOP Type B Menjalec orodij: 12 orodij Mize: 1 okrogla miza Vakuumski sistem: da Preverjanje poloma orodja in dolžine: Renishaw-TS 27 R Ostalo: zbiralnik za odrezke, pohodno perforirano pločevino, pločevina za odsesavanje na zadnji strani Leto izdelave: 2026 Stanje: novo

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 800 mm, višina obdelovanca (maks.): 400 mm, največja hitrost vretena: 36.000 obr/min, hitrost vretena (min.): 1.000 obr/min, Popolno za: Visoko učinkovito 3D rezkanje majhnih kosov – natančno rezkanje z visoko izhodnostjo delov Materiali: Plastika, kompoziti kot so CFK / GFK, modelarski materiali, aluminij Nljdjxdwndopfx Alted Panoge: Avtomobilska industrija, letalstvo, promet in logistika, prosti čas, sanitarna tehnika, gradnja plovil, avtomatizacija Referenčna številka: 1218 Razpoložljivost: marec 2026 Model: 5-osni CNC rezkalni stroj RT-F 1400 Podatki o vretenu: 8 kW / 6,4 Nm; 1000-36000 1/min; HSK E 40 Hitri pomik X/Y/Z: 40/40/30 Mere obdelovanca X/Y/Z: 1000 x 800 x 400 Krmiljenje: SIEMENS – Sinumerik One s HT 2 Izmenjevalec orodij: 12 orodij Mize: 1 okrogla miza Kontrola preloma in dolžine orodja: Renishaw-TS 27 R Ostalo: Kad za odrezke, stopalna rešetka Leto izdelave: 2026 Stanje: novo

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 600 mm, največja hitrost vrtenja: 6.000 obr/min, višina središča: 250 mm, model krmilnika: SIEMENS Sinumerik 840 D, premer obdelovanca (maks.): 25 mm, Aucun prix de réserve - vente garantie au plus offrant ! La machine a été entièrement remise à neuf ! DÉTAILS TECHNIQUES Profondeur de travail : 600 mm Diamètre de travail : 4 – 25 mm Nombre de broches : 2 Hauteur de pointe : 250 mm Entraxe : 203,2 mm Plage de vitesse : 1 000 – 6 000 tr/min Avance : 0 – 300 mm/min Avance rapide : 6 000 mm/min DÉTAILS DE LA MACHINE Commande : SIEMENS Sinumerik 840 D (modernisé) Système de perçage : perçage à canon à une lèvre Entraînement principal : 2 x 5,5 kW Nsdpfexpvbtjx Altold ÉQUIPEMENT - Fonctions individuelles pour la mise en place de la machine - Semi-automatique avec chargement manuel - Chariot porte-broche renforcé - Surveillance de la machine avec affichage de la vitesse de broche - Plateau de table en fonte spéciale - Dispositif de protection avec porte coulissante - Banc de machine avec guidages linéaires trempés et rectifiés - Alimentation interne en liquide de refroidissement par la broche - Équipement électrique conforme à la norme IEC - Armoire électrique séparée avec dispositifs de sécurité - Pupitre de commande dans la zone de travail

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, merilno območje os X: 500 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Oprema: dokumentacija / priročnik, osvetlitev, AIM coordinate measuring centers are the technical successors of the globally deployed Mahr multisensor coordinate measuring machines. Technical specifications: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Higher accuracy available upon request Travel speed: 200 mm/s Acceleration: 400 mm/s² Scale resolution: 0.0001 mm Multisensor head (MSH): optical/tactile/laser -Includes high-precision USB camera with 2-stage zoom and telecentric optical path -Includes PTL01 TTL point laser, high-precision, telecentrically coupled -Includes Renishaw TP200 integrated tactile probing system, optionally expandable -Includes Quad-Light LED power ring light, programmable incident lighting -Includes LED transmitted light -Includes Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount technology Nledpfx Asg Ewk Roltsd -Includes calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere, and reference ring -Advanced PT200 CNC controller system in a robust, industrial grade control cabinet -PCI bus system for high-speed internal data transfer in real-time operation -19" retractable controller rack for optimal access during service -Modular controller concept, open for future upgrades and retrofits -Service-optimized controller design for quick access and minimized service times -Integrated 64-bit broadband bus technology with real-time data transfer -4-channel online temperature compensation ready "on board" -Active safety technology for drives, light management, and sensors -Online remote connection for remote maintenance and system check -LS circuit breakers for quick troubleshooting during service -Firmware adaptation for volumetric 3D full error compensation Includes powerful OptiCheck3D 5.0 software Commissioning, training, and start-up assistance (programming) available as an optional package!

Stanje: novo, Leto izdelave: 2025, TEMP 90 W9 SSR General Information: - Maximum temperature range: 90°C water - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Immersion pump (manufacturer: Speck) with pressure/vacuum function (leak stop mode) - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: 12 litres - Brass/stainless steel fittings - Automatic water refill - Electronic level control - Indirect cooling system (plate heat exchanger) - Cooling capacity: ~40,000 kcal/h (10 plates) Nedpfx Alod Aaruotjld - Display pressure gauge - Integrated bypass - Solenoid valves for cooling and refill Electricals and Controls: - Electronic, self-optimizing PCB controller - Control voltage in unit: 24 V AC - Acoustic and visual alarm display - Solid state relays - Safety thermostat - Sensor break monitoring - Monitoring for hose rupture and leakage - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg

Stanje: novo, Leto izdelave: 2025, General: Nledpfxoddv Its Altjd - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Leto izdelave: 2026, stanje: novo, Sejalni stroj | Vibracijski sejalni stroj tip ASM-550 Razstavni stroj - Znamka: S&F GmbH - Tip: ASM-550 - Kapaciteta sejanja: pribl. 60–70 m³/h (pri sekancih in žagovini) - Površina sita: 5,4 m² - Frakcije: 3 ali 4 Nljdoxtfv Ijpfx Alted - Sejalna nadstropja: 3 - Pogonska moč: 4,0 kW - Teža stroja: pribl. 3.800 kg - Barva stroja: RAL 6011 reseda zelena - Vložki sita in izpust materiala po izbiri Primeren mdr. za sejanje naslednjih razsutih materialov: - lesni sekanci in sekalni material - žagovina in lesni prah - biomasa - leseni peleti - lesno oglje - odpadni les - lubje Vibracijsko sito | sito za sekance | vibracijski sejalni stroj | plansko sito | vibracijsko sito | valjčni separator | sejalni stroj za sekance

Leto izdelave: 2026, stanje: novo, Screening plant for wood chip screening Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on model) Comprising: Nsdpfx Aljin Ewleteld - Vibrating feeder bunker type AVB - Screening machine type ASM - Subframe / hook lift (optional) - Conveyor belt type MFB - Electrical installation Function and operation: The wood chips are loaded into the vibrating feeder bunker with a wheel loader. They are then fed onto the vibrating screening machine type ASM. The screening machine separates the wood chips into three size fractions (oversize, chips, dust). The discharge of the fractions is handled by conveyor belts. Depending on the model, the screening plant achieves a capacity of 20 to 40 m³/h for wood chips. Advantages: - High screening capacity - High separation precision - Low noise and low maintenance - Flexible application - Custom manufacturing Do you require further information? Contact us! We will be happy to advise you.

Stanje: novo, Leto izdelave: 2025, Horizontal Cartoner 60-ECO – Compact, Powerful, and Flexible Lack of space is a common issue in the food industry – our BASIS 50-ECO horizontal cartoner offers a compact and high-performance solution! This machine has been specifically developed to efficiently process a wide range of folding carton sizes in the smallest possible footprint. With a base length of just 2,284 mm (extendable depending on desired conveyor length), it achieves an output of up to 60 folding cartons per minute. Technical Highlights: Adjustable Product Infeed: The infeed conveyor can be customized upon request. Automatic Product Indexing: We can design and fully integrate an automatic product indexing system. Packaging Range: Handles folding cartons up to 220 mm length (A), 120 mm width (B), and 400 mm height (H). Proven Technology for Maximum Reliability: Control: Siemens PLC system Drive: Siemens servo drives for precise motion sequences Nodsmftm Njpfx Altold Adhesive Technology: Nordson hot melt system for clean and secure sealing In addition, we offer a comprehensive portfolio of vertical and horizontal cartoning machines as well as flow wrapping machines. All machines are manufactured in Germany or by our European partners. You are welcome to visit our factory, view the equipment, and test with your own products.