Trio-Technik Trak Za Vlaganje nakup rabljenega (104.231)

Stanje: dober (rabljeno), Transportni valji, transportne role, rezervni valji, transportni trak, valjčna proga, nosilni valji -Transportni valj: z gumiranim ovojem, premer 236 mm Crodslug R Sjpfx Anueh -Transportna širina: 750 mm -Osel: nosilec Ø50 x 100/450 mm, mere glej tehnično risbo na fotografiji -Količina: 1x transportni valj na voljo -Mere: Ø 236 x 1300 mm -Teža: 53 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3200 x 780 x 1500 mm Weight 800 kg Total power requirement 8 kW Edge banding machine KANTOMAX BASIC FÜ - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Operator control panel at machine infeed at eye level - Chain feed system - Support table for PVC and ABS edge bands - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for bonding seam compression - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to workpiece by glue roller - Electronic temperature control, operating temperature 180 - 200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece separation - Joint trimming unit with 2 DIA jointing cutter heads for preparing before the glue section, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 clockwise, 1 counterclockwise) - End trimming unit for front and rear edge overhang; high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit (top and bottom) with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit: tracing from top, bottom, and side to round pre-trimmed PVC edges - Buffing unit for finishing edge surfaces (top and bottom), 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, angle and height adjustable Credpfsvz E Evox Anush - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1050 x 830 x 1100 mm Weight: 133 kg Total power requirement: 2.1 kW Profile edge banding machine KAM535NEO - Motor output S1: 250 (+1750) W - Voltage: 400 V / 3 / 50 Hz - Feed speed: 0–15 m/min - Table size: 1000 x 700 mm - Table height: 850 mm - Minimum workpiece thickness: 10 mm - Maximum workpiece thickness: 50 mm - Edge width: 13–54 mm - Edge thickness: 0.3–3 mm - Operating air pressure: 4–5 bar - Operating temperature: 170 °C - Minimum internal curve radius: 20 mm - Sound pressure level dB(A): < 70 - Packaging width: 830 mm - Packaging length: 1,050 mm - Packaging height: 1,100 mm - Gross weight: 161 kg - Net weight: 133 kg - Semi-automatic edge banding machine - Suitable not only for straight, but especially for applying edging to curved workpieces - Direct adhesive application on both straight and curved edges - Double-sided application to laminate and edge Crsdevz E Hmepfx Anujh - Automatic length cutting - Glue temperature electronically adjustable - Variable feed speed control - 1750 W heating capacity - 250 W feed motor

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edge Banding Machine KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min - Control Panel at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven primary pressure roller and follow-up rollers to ensure compression of the glue joint - Centrally adjustable top pressure - Glue pot Teflon-coated for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, operating temperature 180 - 200°C - Pneumatic end trimming station Cjdpfx Ansvz E Scjuerh - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for trimming before edge gluing station, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one clockwise, one counter-clockwise) - End trimming unit for front and rear edge overhang, high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pulling trim cut for high accuracy - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit top and bottom for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, inclinable and height-adjustable - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound insulation cabin with inspection window - Compressed air connection: 6 bar - Machine dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 36956, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, skupna dolžina: 9.800 mm, skupna masa: 600 kg, višina plošče: 1.060 mm, TEHNIČNE PODROBNOSTI Višina obdelovanca: 60 mm Debelina roba: do 3 mm Minimalna širina plošče: 55 mm Minimalna dolžina plošče: 100 mm Višina plošče: 1.060 mm Nosilec orodja: ISO 30 PODROBNOSTI O STROJU Mere & Teža Skupna dolžina: 9.800 mm Codpfx Anjx A Tzqeujrh Teža: 600 kg Vhodna frekvenca: 50 Hz OPREMA Povratni sistem Deluje z PUR lepilom Razpršilni sistem Predrezalna enota RT 20 Lepilna enota SP 20 6-pozicijski magazin za robove Končna rezalna enota IT 90-S Groba rezkalna enota RS 10 Fina obrezovalna enota RF 40 Opomba: Dodatne informacije o opremi so na voljo v priloženi kartici stroja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Cjdpfx Asxzfwbsnujrh Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 13,000 x 1,700 x 1,700 mm Weight: 1,950 kg Total Power Requirement: 13.5 / 17.5 kW Block Band Saw TTM-1100 - Max. log diameter: 1,100 mm - Max. cutting length: 10 m - Rail length: 12 m - Main drive: 11 or 15 kW - Horizontal feed drive: 1.10 kW - Vertical feed drive: 1.10 kW - Roller feed drive: 0.18 kW - Voltage: 400 V / 50 Hz - Saw head electrically adjustable - Forward feed speed: 1.5 – 20 m/min - Reverse feed speed: 5.0 – 40 m/min - Up/down feed speed: 20 mm/s - Saw blade dimensions: Cjdov A Htqjpfx Anusrh Length: 4.80 – 4.90 m Width: 35 – 38 mm Thickness: 1.1 – 1.2 mm Tooth pitch: 22 mm - Operator seat included - Turning rollers included - Log clamps included - Log supports included - Viewing ruler included - Circular scale included - Saw unit dimensions: W=2,400, L=1,700, H=1,700 mm - Saw unit weight: 950 kg - Rail weight (2 x 6.0 m): 700 kg - Rail accessories weight: 300 kg - Overall dimensions: L=13.0 m x W=1.7 m x H=1.7 m - Total weight: 1,950 kg OPTIONAL: - Pre-cutter: EUR 1,050 - Cut thickness programming with digital display: EUR 1,080 - Saw blade lubricant pump for winter operation: EUR 300 - Chain log turner device: EUR 11,700

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 2800 x 1150 x 1950 mm Weight: 430 kg Total power requirement: 8.5 kW Block Bandsaw ZL-60V - Capacity: 2–6 m³/h - Cutting height: approx. 250 mm - Hydraulic blade tensioning - Blade speed: 30 m/s - Saw motor: 7.5 kW / 400 V / 50 Hz - Feed motor: 0.75 kW / 400 V / 50 Hz - Saw blade length: 4250 mm - Saw blade width: 35–40 mm - Length with tables: 2800 mm - Width: 1150 mm - Weight: 430 kg Included: - Spoked wheels for 50 mm blade width - Infinitely adjustable feed Crodpov A Hy Refx Anujh - Roller table at infeed and outfeed

Leto izdelave: 2007, stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, Delovna širina: 650 mm, uporabna višina: 220 mm, grelna dolžina: 3250 mm Peč ima 3 grelne cone in 125 kW grelne moči. Peč je nekaj let stala v hali; številne komponente je potrebno peskati in na novo lakirati. Poleg tega je treba peč na novo zidati znotraj, delno izdelati nekatere nove dele ... Peč lahko po dogovoru v celoti generalno obnovimo na sodoben tehnični standard. Csdpexdantjfx Anujrh

Stanje: novo, DISPENSA: Automatic Strip Dispenser for Packaging Machines Optimize your packaging operations with DISPENSA, the innovative automatic separator strip dispensing system from EUROMÁQUINA, specifically designed for packaging machines. This advanced solution automates the precise insertion of separator strips, significantly improving both efficiency and safety in your production line. The DISPENSA system offers a cost-effective alternative to fully robotized solutions, delivering superior performance with a streamlined investment. KEY ADVANTAGES 📈 Increased productivity: Accelerate your packaging process with fast, automated strip placement. ✅ Enhanced operator safety: Minimizes manual intervention in repetitive and potentially hazardous tasks, creating a safer working environment. 💰 Reduced operating costs: Optimizes material usage and labor, directly contributing to more profitable operations. How does it work? DISPENSA fully integrates into your existing packaging machine. It features adjustable strip loaders adaptable to different package lengths and specific requirements. Each loader is equipped with an automatic dispenser that guarantees precise feeding and exact placement of strips, one at a time. For maximized uptime, we offer optional quick-change loaders that allow offline reloading. System control is managed via an intuitive HMI panel, streamlining parameter setting and full synchronization with your packaging equipment. Ready to optimize your packaging line? Contact us today to find out how DISPENSA can benefit your production line. Application: Designed for automatic strip insertion in packaging systems Cost: More affordable than fully robotized systems Complete integration and synchronization: Seamlessly integrates with your current packaging machine Number of loaders: Adaptable to maximum package length and required strips per package Longitudinal adjustment: Precise, automatic positioning Loader capacity: Up to 250 separators (4 mm thick) Quick-change: Optional Automatic dispenser: Automatic feeding and positioning, dispensing strips one by one with precision Control system: On-board pneumatic solenoid valve group User interface: HMI control panel for intuitive parameterization Codpfeyl Um Iox Anuorh

Stanje: rabljeno, Automatic Packaging Machine MAIR, MPS RH150/D/4/SL & SIGNODE Automatic Strapping Unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL The MPS RH150/D/4/SL Pat. model automatically packs round tubes into hexagonal bundles. The machine enables automatic strapping operations at a fixed position, with the bundle laterally moved and automatically stopping at pre-programmed strapping positions. It consists of: - Four-tube chain conveyors with support teeth and intermittent drive for lifting one tube at a time from the threading machine to the alignment area. - A powered roller for aligning the tube against an adjustable end stop before forming the row. - Two holding areas for the tube row; necessary during the bundle evacuation cycle. Crodoymahyopfx Anush - A robust welded structural steel frame, forming a bridge. - A tube row handling system that collects one row of tubes at a time from the second-row storage and places it on the bundle formation supports. - Handling is performed using a series of electromagnets that rotate during the row transfer cycle; - Four powered vertical supports for forming and holding the bundles. These feature adjustable blades according to the required size and shape of the bundle and lower to allow the bundle to be placed on the evacuation cart. - Powered evacuation cart sliding on rails fixed to the floor and equipped with powered lower rollers and pairs of free vertical retention rollers. - Powered flat conveyor for transporting the bundle after the strapping area. - Powered storage chains suitable for advancing the bundles to the selected count. - Draining station for lifting the bundle, allowing coolant to exit the tubes; equipped with two hydraulically operated devices powered by a hydraulic power unit. - Control cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred by the powered rollers of the evacuation cart to the automatic strapping system. It stops at programmed strapping positions to allow the automatic application of steel strapping. It consists of: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼”) wide steel strap with 0.9 mm wall thickness; - 450 kg strap dispenser with electric payoff - Control panel 3. WEIGHING STATION, model KG8/DY The station weighs tube bundles using load cells. Powered storage chains transfer the bundles into the weighing position. The weighing station is located below the pneumatic lifting devices that raise the bundle for weighing. It consists of: - Lower frame for floor fixation, complete with four supports, couplings, and load cells - Upper clamping frame, able to receive the bundle lifting devices - Compact weight transmitter 4. SOFTWARE, model DATAPACK 3/T The Datapack Management System software enables the operator to: - Monitor and supervise tube production in real time - Set new bundle configuration according to the required parameters

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D06L/7646, Ponudbena številka: D06L/7646 Vrsta stroja: Stroj za upogibanje žice in traku Proizvajalec: MRP Tip: UB4 Leto izdelave: Razpon premerov: 1-4 mm Širina traku: 20 mm Zmogljivost - kosov/min: 80-150 Crsdpfx Aowi S Ncsnuoh Dolžina podajanja: 240 mm Lokacija: V našem skladišču

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, For sale, we offer a strapping machine model TV02 from the manufacturer Schneider & Ozga. Condition: very good, like new, never used. Csdpfoixz Tcsx Anuorh The fully automatic strapping machine TV 02 impresses with maintenance-free direct drives and extremely easy operation. Strapping capacity of 30 single straps and 15 parallel straps per minute Strap width: 5 to 12 mm Various frame sizes available Conveyor belts with four straps Off-center strap sealing TECHNICAL DATA Performance: Up to 30 single strappings/minute Up to 15 parallel strappings/minute Package size: Width: max. 600 mm, min. 160 mm Height: max. (without press) 650 mm, max. (with press) 550 mm, min. 10 mm Package weight: max. 25 kg Strapping material: Polypropylene strap (PP strap) Width: 5-12 mm Thickness: min. 0.35 - 0.70 mm Sealing type: Thermo-welded seal Strap reel: Core diameter: 200/228 mm, Outer diameter: approx. 450 mm Width: 165-210 mm Electricity: 230 V, 1 phase, 50 Hz Power consumption: 1.1 kW at 230V Pneumatics: Operating pressure: 4 bar Consumption single machine: 90 l/min. (3 l/strapping) free air Pressing pressure: 200 N (cylinder diameter 25 mm) Strap tension: max. 200 N Conveyor speed: approx. 26 - 59 m/min. STANDARD EQUIPMENT · Extraction system · Automatic strap feed · Strap detection · Infeed and outfeed cycle with connector · RAL 5007 color (brilliant blue) · Continuously adjustable table conveyor speed · Short heat-up time · Motors without mechanical brake · PLC control with four programmable settings for different products · Continuously adjustable reverse tension · Touchscreen lockable with customizable code · Strapping counter · Maintenance-free direct drives Price: €12,000 net Machine in stock, available immediately Location: 89-600 Chojnice, Poland If interested, please contact us.

Stanje: dober (rabljeno), Strapping machine, packaging machine, strapping tool, carton stapler, hand stapler, plier stapler, tensioning and sealing device Credpoi I Hdgofx Anuoh - Tensioning pliers: sealing tool for strapping band - Band width: approx. 16 mm - Staples: approx. 19 mm wide, see photo - Dimensions: 480/100/H170 mm - Total weight: 3.6 kg

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S4 1TT33 3250, skupna širina: 4.340 mm, skupna višina: 2.775 mm, skupna dolžina: 5.145 mm, delovna širina: 1.350 mm, višina obdelovanca (maks.): 16 mm, Viet S4 calibrating and sanding machine. * 1st sanding unit: Longitudinal T60 E IPP HP DU; Belts 1380x3250 mm, Driven by 15 kW inverter motor * 2nd sanding unit: Cross T60 ET HP DUO; Belts 150x8700 mm, Driven by 15 kW inverter motor * 3rd sanding unit: Cross T60 ET HP DUO; Belts 150x8700 mm, Driven by 15 kW inverter motor Variable feed belt speed: 2–20 m/min Cedpfx Aoutdrhonuorh Complete extraction system included.

Stanje: novo, Edge thickness up to 3 mm Total length 4,122 mm Feed speed 10 m/min with PLC control (including touchscreen) and hot-melt glue application indication to the workpiece for tape material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm milling depth, Crsdpfx Anevwd Uusuoh maintenance-free glue pot with quick-change pot preparation end trimming unit, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable profile cutter (combination version), corner rounding unit, surface scraper (including pneumatic lift), vacant station (for cleaning station or radius scraper), sturdy chain drive, double roller pressure beam with ball bearings, viewing window from the rear of the machine, extendable workpiece support, approx. 10 m/min feed speed. Art. No. F4/00/11 - Whispercut jointing head F4/500/10 - Combination profile cutter head F4/500/20 - Radius cutter R=2mm F4/500/2 - Corner radius cutter R=2mm F4/08/2 - Quick-change device for corner rounding unit F4/08/4 - Radius scraper (incl. pneumatic lift) F4/09 - Radius scraper R=2mm F4/09/2 - Chassis F4/10 - Pneumatic 3-point adjustment (radius, chamfer, flush milling) F4/30

Stanje: rabljeno, Leto izdelave: 2007, z enoto za podajanje za oblikovane dele z navedbo talilnega lepila Odlično stanje Crodpfx Asvwgizonujh očiščeno, funkcionalno preverjeno, testirano, poskusni zagon rabljeno, v dobrem stanju znamka Artech-Biesse tip Single leto izdelave 2007 št. stroja 91009 CE certifikat z avtomatskim krajšanjem robov, lepljenje zaokroženih robov nastavljiva podlaga – lepljenje poševnih robov Izvlečna razširitev mize z valjčno podporo podajni sistem – brezstopenjsko nastavljiv debelina robu 0,4 - 3,0 mm Višina obdelovanca min 10, maks. 120 mm potrebni prostor pribl. 1400 mm x 1000 mm x 1600 mm teža pribl. 320 kg Skupna priključna moč 5,2 kW Lokacija skladišča 97447 Gerolzhofen, brezplačno naloženo, nepakirano Predaja v trenutnem stanju, kot je bilo ogledano, brez garancije in jamstva.

Leto izdelave: 1976, stanje: pripravljen za uporabo (rabljen), I am selling a tenoning machine for parallel grooving, such as grooves for pallet slats, etc. WACO T2-SL Year of manufacture: 1984. Groove width: 30 mm. Motor: 3.3 kW Made in Germany. Codpfx Ansh Hp U Sjuerh Available immediately. Comes with documentation.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, ATS counting, stacking, and banding system Operating sequence: Credpfx Ashk I Nionueh The products are reliably separated, counted, and stacked by the vertical magazine feeder. From the collection station, the products are then transferred (rotated by 90°), fed into the banding unit via a pusher, banded, and ejected one by one.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AE800, STROJ ZA REZANJE HRANE D800 Crsdpfx Anshmpz Ioush Stroj je zasnovan za rezanje zelenjave na kocke, trakove ali rezine. Rezanje poteka s pomočjo vrtenja izdelka z uporabo centrifugalne sile in fiksnih rezil, kar zagotavlja enakomeren rez zaradi širokega nabora rezil in njihovih kombinacij od 3 do 25 mm. Stroj je posebej primeren za rezanje večjih količin kock različnih velikosti. Odstranitev enega rezila omogoča rezanje trakov, rezine pa lahko režete, če pustite le eno rezilo.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Codpfx Ajl Rix Esnusrh Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. Crjdpsl Rix Nofx Anueh • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: zelo dobro (rabljeno), adhesive applicator guillotine cut-off saws Crodpfx Ansttu Risueh milling machine scraper polishing machine

Stanje: dober (rabljeno), Collection basket, collection container, mower unit, lawn mower, cutter bar, disc mower -without blower -for side discharge -Dimensions: 1500/800/H1400 mm Credob Ig Uuopfx Anuoh -Weight: 100 kg

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000 Crsdpfer I Am Hox Anush