Trimill Trimill Vu 2313 nakup rabljenega (124)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, skupna širina: 300 mm, širina transportnega traku: 290 mm, -KOM 1550- Tukaj je ponujen magnetni tračni transporter. Tehnične podatke si lahko ogledate na slikah in identifikacijskih ploščicah. Lajdpfeyvfqljx Af Sog Opomba: Transporter za ostružke je na zalogi pri nas in ga je mogoče videti v delujočem stanju. Motor: Proizvajalec: SEW Eurodrive Tip: R43-VU01

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 30 t, DURENDUS 30 T Heated Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here was built and delivered on customer order. We can manufacture this machine as a new unit at short notice – with consideration of individual options as requested. This is a hydraulic heated press with electrically heated plates and a manual sliding table, designed for pressing, laminating, and forming processes under heat. Lsdey H Dtzjpfx Af Seag Base price: €42,000 net Options (upon request): The listed options are based on realized customer projects and allow for tailored adaptation of the machine to specific application requirements. The base machine provides a fully functional standard configuration – in practice it is usually supplemented by additional equipment and configured project-specifically. ==== Technical Data + Information: ==== General Information * Design: Double column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heating plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table travel: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-fold slideway guides for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulic System & Drive * Working pressure: max. 240 bar * Pump flow rate: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 control with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200°C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Two-coat finish according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, compression moulding Heated press, hydraulic press, double column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC norms, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they comply fully with the Brazilian national safety directive NR 12, which builds on these norms. Our key strength is in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are equipped predominantly with components from leading European manufacturers.

Stanje: rabljeno, prevoženi kilometri: 205.172 km, moč: 200 kW (271,92 KM), prva registracija: 05/2013, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 3, Leto izdelave: 2013, Oprema: centralno zaklepanje, električno upravljanje oken, klimatska naprava, = Druge možnosti in dodatki = - Kamera za vzvratno vožnjo = Dodatne informacije = Tip goriva: Zemeljski plin Ljdpfsy H Dwyjx Af Sjag Število cilindrov: 6 Prostornina motorja: 7.790 cc Lastna masa: 14.150 kg Nosilnost: 5.850 kg Dovoljena skupna masa: 20.000 kg Proizvajalec: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Stanje: rabljeno, Novo: Ne Laedpfoyvr Nijx Af Sjg Za dodatne informacije nas kontaktirajte.

Leto izdelave: 2024, stanje: rabljeno, Novo: Da Barva: Črna Lodsx I Exbjpfx Af Ssag Uporabni material: Krompir

Stanje: rabljeno, Leto izdelave: 2025, New: Yes Usable material: Foodstuffs Unladen weight: 750 kg Lajdpfx Aox I Dr Tjf Ssg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: nvt, skupna masa: 25 kg, Brand new filling machine / dosing machine suitable for filling liquids, pastes, creams, oils, etc. Designed for practically all types of liquids as well as thicker substances. Examples include: - Shampoos - Creams - Honey - Jam - Milk - Yoghurt - Water - Alcohol - Pesto - Disinfectants - And more This is a robust, high-quality machine constructed from premium-grade stainless steel (RVS). Operates on compressed air and 220V power, making it plug-and-play! Ideal for filling small batches. Only a very small compressor is needed to operate this machine; we recommend a minimum 12L compressor, which can be supplied if required. The filling machine comes equipped with a 500ml cylinder, allowing a maximum fill per cycle of 500ml. By running multiple cycles, larger fill volumes can easily be achieved (for example, 750ml through two 375ml cycles). The smallest fill per cycle is 50ml, so anything between 50ml and 500ml can be dispensed in a single cycle. We also offer a model with a 100ml cylinder, suitable for dispensing volumes between 5ml and 100ml per cycle. Please contact us for further details. The machine is fitted with a large 25L hopper. Optional hookups are available for IBC tanks or 200L drums, enabling even faster filling when handling larger volumes. The unit comes with both a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it easy and efficient to process large quantities. The fill speed can be adjusted. The foot pedal allows for manual, paced operation at your own speed. Lodpfxsrivv Ej Af Ssag Depending on the operator and fill amount, the throughput is between 15 to 25 units per minute, making this a highly productive machine. The approx. weight is 15-20kg, and the compact design makes it easy to place on a work table. Entirely stainless steel construction ensures a highly durable and quality machine. For questions, please email us—we are happy to assist with this or other machines. We also offer a labelling machine which is an excellent match with the filling machine. We strive to respond within 24 hours. Of course, you can also reach us by phone. Our team is available Monday to Friday from 08:30 to 17:00.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NVT, vrsta vhodnega toka: Enosmerni tok, trajanje garancije: 24 meseci, skupna masa: 30 kg, polnilna masa (maks.): 30.000 g, vhodna napetost: 220 V, pritisk: 2 letvica, kapaciteta rezervoarja: 30 l, New filling machine / filler suitable for dispensing liquids. Typical applications include: - Milk - Water - Alcohol - Disinfectants - Etc. Laodpfx Afsrivxce Ssg This is a robust machine operating on compressed air and 220V—truly Plug and Play! It is particularly well-suited for filling small batches. Only a very small compressor is needed to run the machine; we can supply one if required. For optimal performance, we recommend a minimum 12L compressor. The filler features a 1000ml cylinder, allowing a maximum fill of 1000ml per stroke. Multiple strokes can be used for larger volumes, e.g., easily achieving 2500ml by dispensing 2 x 1250ml. The smallest possible stroke is 100ml; any amount between 100ml and 1000ml can be dispensed in a single cycle. We also offer models with cylinders up to 5000ml per stroke. Equipped with a suction hose, the machine can draw liquid directly from a drum or IBC. It comes with both a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, making it easy and quick to process higher volumes. The foot pedal allows the operator to fill at their own pace. Depending on the operator and fill volume, the machine can process between 15 and 25 units per minute, making it a very fast solution. Weighing approximately 15-20kg, it can be conveniently placed on a table. Made entirely of stainless steel, this is a high-quality, durable machine. For questions, please email us—we are happy to assist with this or other machines. We also offer a label applicator, which pairs exceptionally well with the filler. We strive to respond within 24 hours, and are also available by phone. We look forward to assisting you on working days between 08:30 and 17:00.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljena vozičkarska pečarska linija s 2 x vozičkarsko pečjo Heuft Vulkan Thermo-Roll VTR 10.19,0.09 in 1 x kotlom Heuft HK 200, tovarniška št. 13 C 582, s 3 vozički 60 x 100 cm na peč, 9 etaž na voziček/peč, etaže visoke 18,5 cm, z rabljenim oljnim gorilnikom Weishaupt, zunanje mere na peč: 170 cm široka, 325 cm globoka, 260 cm visoka, zunanje mere kotla: 105 cm širok, 170 cm globok, 200 cm visok, v pekovskem stanju, delovala brezhibno do zadnjega. Lasdpfexpxddox Af Seg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Enosmerni tok, trajanje garancije: 24 meseci, priključek za stisnjen zrak: 2 letvica, skupna masa: 20 kg, polnilna masa (maks.): 1.000 g, polnilna teža (min.): 100 g, vhodna napetost: 220 V, pritisk: 2 letvica, kapaciteta rezervoarja: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: brand new filling machine suitable for filling liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yogurt - Water & alcohol - Sauces such as pesto - Etc. Simple, reliable, and instantly operational This filling machine operates on compressed air and 220V power and is fully plug & play. This makes the machine very user-friendly and highly suitable for filling small to medium-sized batches. Only a small compressor is needed for operation; a compressor can be supplied upon request. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing up to 1000 ml to be dispensed per stroke. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be filled in one stroke - Larger volumes can easily be realized by executing multiple strokes Large hopper & extension options Standard equipped with a 30-liter stainless steel hopper. In addition, it is possible to connect the machine to an IBC container or 200-liter drum, enabling swift and efficient processing of larger filling runs. Manual or automatic operation The machine is equipped with: - Foot pedal – for filling at your own pace - Automatic mode – continuous filling cycle for higher quantities Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Lsdpfxsrivwfo Af Sjag Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully manufactured from high-grade stainless steel - Robust, industrial quality More information If you have any questions, feel free to email us; we are happy to assist you with this or any other machine. We also have a labeling machine available, which is an excellent combination with this filling machine for a complete filling solution. We strive to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna masa: 30 kg, skupna dolžina: 33 mm, skupna širina: 40 mm, skupna višina: 130 mm, obratovalni tlak: 2 letvica, končni tlak: 2 letvica, trajanje garancije: 24 meseci, Pneumatic Vacuum Liquid Filling Machine – Constant Fill Level This vacuum liquid filling machine operates entirely pneumatically and requires no electricity. A small compressor is sufficient to power the machine. Thanks to the vacuum-controlled constant-level filling principle, each bottle is filled to exactly the same liquid level, regardless of differences in bottle volume. This ensures a consistent and professional end result. Compact, Lightweight, and Durable The machine is constructed entirely from premium stainless steel, is compact in size, lightweight, and takes up minimal space. This makes it easy to place on a workbench and ideal for both production and test environments. Versatile Application Suitable for filling both small and larger volumes of liquid products, including: - Water - Perfume - Milk - Eye drops - Oils (such as sesame oil) - Beverages - Alcohol - And similar liquids Efficient Operation Lsdperivxyofx Af Seag The machine is equipped with two filling heads, enabling continuous operation. Depending on the operator and bottle capacity, up to approximately 20 bottles per minute can be filled. Contact & Delivery For questions or additional information, please feel free to contact us by email or phone. Transport within and outside Europe is possible.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23130745, skupna dolžina: 3.500 mm, skupna širina: 1.550 mm, skupna višina: 2.570 mm, moč: 1.351 kW (1.836,85 KM), vrsta goriva: električni, volumenski pretok: 2.239 m³/h, tlak (maks.): 28 letvica, Rabljen vijačni kompresorski skid Frick / York SGC 2313 - Sabroe SAB 233 S na R717 (amoniak). Popolnoma opremljen z elektromotorjem Schorch DQ7250S-PB83P-Z - 60 Hz - 110 kW - 3550 vrt./min z dodatnim hlajenjem, Sabroe separatorjem olja OHU 07629 s kapaciteto 1371 litrov, oljnim filtrom Sabroe OF 2111, Vahterus PSHE 3HH-66/2/1 Q-plate oljnim hladilnikom, oljno črpalko in regulatorjem Unisab 3. Kompresor ima delovno prostornino 2239 m³/h. Zmogljivost 1351 kW pri -6,7 °C/+35 °C. Laedpjxyk Enofx Af Seg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 860 mm, višina skobljanja: 230 mm, Petosni Kupfermuhle Višina skobljanja obojestransko do 230 mm, štiristransko do 200 mm z dodatnim odsesovalnim pokrovom in osjo. S standardnim odsesovalnim pokrovom in osjo do višine 125 mm Spodnja os: 15 kW Zgornja os: 22 kW Dodatna spodnja os: 11 kW Leva os: 11 kW Lsdpoxliccjfx Af Sjag Desna os: 11 kW Motor za podajalnik: 18 kW Spodnja in zgornja os sta opremljeni z ravnalnikom Podajalna hitrost 20-130 metrov na minuto Prejšnji lastnik je izvedel celovito obnovo stroja, mi pa smo ga občasno uporabljali 2 leti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, stroj, ki oblikuje kovino ali material pod zelo visokim pritiskom Lodpfx Asy A Hv Dof Ssag

Stanje: rabljeno, To ponudbo predstavljamo zamrzovalnik Thermo Scientific TSX40086V Ultra Low Temp. Enota je popolnoma funkcionalna in pripravljena za takojšnjo uporabo. Vključeni so temperaturni senzorji. Thermo Scientific TSX40086V je ultranizkotemperaturni zamrzovalnik, zasnovan za zanesljivo, trajnostno in energijsko učinkovito shranjevanje laboratorijskih vzorcev. Z napredno tehnologijo in robustnimi varnostnimi funkcijami zagotavlja varnost in ohranjanje dragocenih materialov. Glavne značilnosti: Kapaciteta in dimenzije: - Prostornina: Sprejme do 400 škatel po 2" in omogoča obsežno shranjevanje različnih tipov vzorcev. - Kompaktna zasnova: zunanje mere 37,6 × 28,3 × 78 palcev, kar omogoča prilagodljivost v različnih laboratorijskih prostorih. Temperaturni razpon in zmogljivost: Ljdpfexxycmox Af Seag - Temperaturni razpon: Ohranja ultranizke temperature od -50 °C do -86 °C za optimalno hrambo vzorcev. - Temperaturna stabilnost: Variacija manj kot 5 °C po celotni notranjosti za dosledno shranjevanje. - Čas segrevanja: Podaljšan čas dviga temperature iz -50 °C na -80 °C (približno 5,05 ure), kar zagotavlja dolgotrajno zaščito med morebitnimi izpadi električne energije. Energetska učinkovitost in trajnost: - Certifikat Energy Star: Zmanjšuje porabo energije brez izgube zmogljivosti ter tako zmanjšuje obratovalne stroške. - Tehnologija V-Drive: Prilagaja delovanje vzorcem uporabnikov za optimizacijo porabe energije in zmanjšanje obremenitve HVAC sistemov. - Okolju prijazna izdelava: Proizvedeno v tovarni brez odpadkov z naravnimi hladilnimi sredstvi in izolacijo iz ekspandirane pene na vodni osnovi. V skladu z zahtevami ameriške EPA SNAP in EU Uredbe o F-plinih. Povezljivost in nadzor: - DeviceLink tehnologija: Omogoča spremljanje stanja sistema in temperature vzorcev v realnem času prek mobilnih ali spletnih aplikacij za večji nadzor in brezskrbnost. Varnost: - Napredne varnostne funkcije: Alarmni sistem, zaklepanje na ključavnico ter možnost dostopa z vstopno kartico za dodatno zaščito. Prednosti: Trajnost: Proizveden iz okolju odgovorno izbranih materialov in postopkov, kar predstavlja trajnostno izbiro za laboratorije, ki želijo zmanjšati svoj ogljični odtis. Prihranek energije: V-Drive tehnologija in certifikat ENERGY STAR bistveno zmanjšujeta obratovalne stroške z optimizacijo porabe energije. Zaščita vzorcev: Zaradi dolgega časa segrevanja in stabilnih temperatur so vaši dragoceni vzorci zaščiteni tudi ob morebitnih prekinitvah napajanja. Udoben nadzor: Oddaljeno spremljanje prek Device Link sistema omogoča nadzor nad stanjem in temperaturo kjerkoli in kadarkoli. Prilagodljiva shramba: Velika prostornina in enakomerna porazdelitev temperature omogočata hrambo številnih različnih vzorcev. Uporaba: Thermo Scientific TSX40086V je idealen za laboratorije, ki potrebujejo zanesljivo ultranizkotemperaturno shranjevanje za kritične materiale, kot so: - biomedicinske raziskave (dolgotrajna hramba bioloških vzorcev, DNA, RNA, proteinov), - klinični laboratoriji (shranjevanje cepiv, plazme in drugih temperaturno občutljivih vzorcev), - farmacija (shranjevanje spojin, zdravil in reagentov), - industrijske raziskave (varna hramba surovin in kemikalij).

Stanje: rabljeno, Ta ponudba je za 1 od 2 Ortho Biovue System Heat block-32 grelnih blokov. Lsdpfx Afjxzh Rkj Seag

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: IntNr231315, Technical data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Air flow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (standard) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (similar to WS2 model) Accessories & Features • Compact design for direct mounting on or beside CNC machines • Extraction stand • Three-stage separation for efficient oil and coolant mist extraction • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low noise operation, and long-lasting filter elements Laedpszx Rv Dofx Af Sog Subject to change and error in technical specifications as well as prior sale.

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: IntNr231316, Technical data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Airflow capacity approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optionally HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (similar to WS2 model) Accessories & Features Lajdpfx Afozx Rrrs Sjg • Compact design for installation directly on or next to CNC machines • Extraction stand • Three-stage cleaning for effective separation of oil and coolant mist • Cartridge filter retrofit option with HEPA kit • Easy maintenance, quiet operation, and long-lasting filter elements Subject to change and errors in the technical data and information; prior sale reserved!

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Ljdpfx Aet Hw Shsf Ssag Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, TEHNIČNI PODATKI - Število osi: 8 - Število vreten: 2 GLAVNO VRETENO - Maks. premer obdelovanca: 20 [mm] - Maks. dolžina obdelave: 200 [mm] - Hitrost vretena: 10000 [RPM] - Moč pogona vretena: 2,2/3,7 [kW] - Minimalna ločljivost osi C: 0,001 [stopinje] NASPROTNO VRETENO - Maks. premer obdelovanca: 20 [mm] - Hitrost vretena: 10000 [RPM] - Moč pogona vretena: 0,75/2,2 [kW] - Minimalna ločljivost osi C: 0,001 [stopinje] NOSILEC ORODJA 1 - Število položajev: 9 - Število motoriziranih položajev: 4 - Hitrost motoriziranih orodij: 9000 [RPM] - Moč motoriziranih orodij: 2,2 [kW] SPREDNJI NOSILEC - Število položajev: 6 + 3 - Število motoriziranih položajev: 3 - Hitrost motoriziranih orodij: 7500 [RPM] - Moč motoriziranih orodij: 0,75 [kW] NASPROTNA OBRABA - Število položajev: 8 - Število motoriziranih položajev: 4 - Hitrost motoriziranih orodij: 7500 [RPM] - Moč motoriziranih orodij: 0,75 [kW] ELEKTRIČNO NAPAJANJE - Napetost: 200 [V] - Skupna moč: 7,3 [kVA] TEŽA IN DIMENZIJE - Potrebna površina: 2120 x 1220 [mm] - Višina stroja: 1835 [mm] - Teža stroja: 2350 [kg] DELOVNI ČAS STROJA - Delovni čas: 12674 [ur] OPREMA - Upravljanje: Mitsubishi MELDAS M70LPC-VU - 3-barvna statusna luč - Motorizirana vodilna puša - Izmetalec delov - Odstranjevanje delov - Transportni trak za dele - Odstranjevalec sekancev: LNS TURBO MF3 - Rezervoar za hladilno tekočino: MÜLLER COMBILOOP * z visokotlačno črpalko: 100 [bar] - Revija za obdelovance: IEMCA SMART 32 LL - Sistem za gašenje požara * Ljdpfxozk Rr Aj Af Sjag * Opomba: Delovanje ni zagotovljeno. Naj preveri usposobljen izvajalec po naročilu kupca.

Stanje: rabljeno, TEHNIČNI PODATKI - Število osi: 9 - Število vreten: 2 GLAVNO VRETENO - Maks. premer obdelovanca: 20 [mm] - Maks. dolžina obdelave: 200 [mm] - Hitrost vretena: 10000 [RPM] - Moč pogona vretena: 2,2/3,7 [kW] - Minimalna ločljivost osi C: 0,001 [stopinje] PROTIVRETENO - Maks. premer obdelovanca: 20 [mm] - Hitrost vretena: 10000 [RPM] - Moč pogona vretena: 0,75/2,2 [kW] - Minimalna ločljivost osi C: 0,001 [stopinje] NOSILEC ORODIJ 1 - Število pozicij: 8 - Število pozicij z motoriziranim gibom: 3 - Hitrost pogonjenih orodij: 9000 [RPM] - Moč pogonjenih orodij: 2,2 [kW] SPREDNJI NOSILEC Laodpjzk Rtasfx Af Seg - Število pozicij: 3 + 4 - Število pozicij z motoriziranim gibom: 4 - Hitrost pogonjenih orodij: 7500 [RPM] - Moč pogonjenih orodij: 0,75 [kW] PROTINOSILEC - Število pozicij: 8 - Število pozicij z motoriziranim gibom: 4 - Hitrost pogonjenih orodij: 7500 [RPM] - Moč pogonjenih orodij: 0,75 [kW] ELEKTRIČNO NAPAJANJE - Napetost napajanja: 200 [V] - Skupna moč: 7,3 [kVA] TEŽA IN DIMENZIJE - Potrebna površina: 2.120 x 1.220 [mm] - Višina stroja: 1.835 [mm] - Teža stroja: 2.350 [kg] URICE DELOVANJA STROJA - Ure pod napetostjo: 48559 [ur] - Ure obratovanja: 31082 [ur] - Ure vretena: 10361 [ur] PRIKLJUČKI - Krmilnik: Mitsubishi MELDAS M70LPC-VU - Os vrtenja B: [stopinje](+/-) - Pogonska vodilna puša - Izmetalec delov - Odstranjevalec delov - Transportni trak za dele - Rezervoar za hladilno tekočino * z visokotlačno črpalko - Magazin za palice: IEMCA BOSS 338 HD/R / 32 LL

Stanje: rabljeno, Leto izdelave: 2018, Citizen Cincom L20E - 2M10, CNC stružnica z drsnim vretenom in sistemom Cincom M70LPC - VU, CNC upravljalnik, dvojno vreteno, vpenjalne glave, največji premer obdelovanca 20 mm, 26 mest za namestitev orodij, 5 stružnih orodij, 7 orodij za vrtanje, 6 sprednjih vrtin, 8 zadnjih vrtin, možnost uporabe pogonjenih orodij, vreteno 1 – 200–10.000 vrt/min, vreteno 2 – 200–8.000 vrt/min, avtomatski sistem za gašenje požara Fire Track, sistem za odstranjevanje olja Filtermist 5400, posoda za dele in transportni sistem, serijska številka QF6822 (2018), Imeca Boss 338-HD SM, avtomatski podajalnik palic, serijska številka 021941NA01 (2019), teža 2350 kg. Država izvora: Tajska. Lajdpfozzb Ayox Af Ssg Lokacija: Te serije so shranjene v Biggleswadeu, Združeno kraljestvo. Na žalost na tem mestu ni možnosti za nakladanje, razstavljanje in nakladanje bo plačal kupec.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6624656, Leto izdelave: 2018, obratovalne ure: 2.313 h, nosilnost: 1.400 kg, dvižna višina: 3.700 mm, prosto dvigovanje: 1.390 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 1.830 mm, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Stacker Chassis number: 6624656 Mast type: Triplex Condition: Refurbished, without warranty Technical condition: very good Battery voltage: 24V Battery capacity: 250Ah Battery year: 2018 Ljdjuhxkaspfx Af Ssag Description: Toyota SWE140, Ref. No.: R0357, Year of manufacture: 2018, Operating hours: 2,313. The machine is in very good optical and technical condition. Charger available upon request. Fast and uncomplicated transport can be arranged by agreement! This listing serves solely to identify the machine. A detailed description of the condition and possible features is available upon request! Subject to errors and prior sale. Sale only to commercial customers. Every sale of used goods is made with exclusion of liability for defects and/or warranty. If you have not found your desired forklift, please contact us. We have a wide range of other equipment available on site.

Stanje: novo, številka stroja/vozila: 9151, Leto izdelave: 2024, obratovalne ure: 3 h, nosilnost: 3.500 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.460 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.313 mm, Oprema: bočni pomik, Device details: Year of manufacture: 2024 Load capacity: 3,500 kg Lifting height: 4,700 mm Indicated operating hours: 3 h Ledpetw Az Dofx Af Sjag Free lift: 1,460 mm Mast type: Triplex Mast height: 2,313 mm Length/Width/Height: 2,800 / 1,235 / 2,230 mm Operating weight: 5,215 kg ---- Equipment: * Overhead guard * 3rd valve * 4th valve * Full free lift * Front work lights ----- Attachments: * Side shifter * Load backrest ---- Further device information: ---- Operating hours are generally read-off values. We are happy to offer you suitable transport. An additional 250 - 300 forklifts, attachments, and sweepers immediately available for you. Naturally also for rental! We are also happy to purchase your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. In the dealer business, the equipment is sold in its current condition, not refurbished. All information is provided without guarantee; errors and changes excepted.