Ss Filtrirna Stiskalnica Z Listi – Plc Avtomatski nakup rabljenega (65.132)

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Lasdpfx Ajyupulsc Ujf Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: rabljeno, Hydraulic Notching Machine with Angle Adjustment SIMASV Type AV 220-6PA Serial No. C1524 Year of Manufacture: 1996 Blade Length: 220 mm Material Thickness (Steel): 6 mm Material Thickness (Stainless Steel): 4 mm Table Dimensions: 950 x 790 mm Table Height: 940 mm Motor Power: 3 kW Power Supply: 400 Volt, 50 Hz Lajdpfjrzfh Hsx Ac Uef - Operation via pushbutton or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment by two hand cranks for right and left - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop bars with degree graduation - Multiple mm measuring scales integrated in the table top - HSS blades newly ground, as new condition Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.000 h, stiskalna sila: 200 t, širina mize: 1.400 mm, dolžina mize: 3.200 mm, skupna dolžina: 3.200 mm, skupna širina: 1.400 mm, skupna višina: 2.900 mm, skupna masa: 23.000 kg, obratovalna temperatura: 200 °C, višina obdelovanca (maks.): 150 mm, temperatura: 210 °C, Na prodaj je skoraj kot nova furnirna stiskalnica z vhodno/izhodno mizo nemškega proizvajalca Wemhöner, model KTV1E (serijska številka 1645, letnik 1992). Stroj je v odličnem stanju in je bil zelo malo v uporabi. Vrsta stroja: pretočna stiskalnica Proizvajalec: Wemhöner Tip: KTV1E Serijska številka: 1645 Selecta Leto izdelave: 1992 Lokacija: 57223 Kreuztal Na voljo: takoj Tehnični podatki: Dolžina stiskalnice: 3200 mm Širina stiskalnice: 1400 mm Grelniki: da Ogrevalni medij: olje Nakladanje: da Dovodni trak: 3200 x 1900 mm Izvzemni trak: 3200 x 1900 mm Stiskalna površina: 3200 x 1450 mm Prehodna višina: cca 100 mm Temperatura predgretja: 200° Toplotna moč: 45 kW Ogrevalni medij: olje Stiskalna sila: 200 ton Stiskalnica je v odličnem stanju, imela je zelo malo delovnih ur in je bila zadnjih 15 let uporabljena izključno za razvojne projekte. Z veseljem vam na zahtevo pošljem dodatne informacije in slike. Stroj je takoj na voljo in ga je možno kadarkoli po dogovoru ogledati. Samo osebni prevzem! Video delovanja na zahtevo. V primeru interesa sem vam na voljo za dodatne informacije ali ogled! Lodpfx Acownpcds Uoaf

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 4788, Skupna pritiskalna sila: 35 t Izvlaka: 225 mm Hod bata: 8 - 80 mm Nastavitev bata: 50 mm Ledpfxow Tukio Ac Ueaf Montažna višina (hod spodaj, nastavitev zgoraj): 325 mm Pritrdilna površina mize pribl.: 600 x 450 mm Pritrdilna površina bata pribl.: 300 x 225 mm Število hodov na minuto: 160 min-1 Potreba po moči: 2,2 kW Dimenzije DxŠxV: 1000 x 1600 x 2200 mm Teža stroja pribl.: 1,9 t

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t Throat depth: 350 mm Laodpfx Asuqdwxec Uef Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke down, adjustment up): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min⁻¹ Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment: Machine includes: - Guard HS Decoiler M 15 / 500 - Year of manufacture 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outside diameter: 1400 mm Coil inside diameter: 380 - 530 mm HS Straightening Machine RME 40 - 9 - Year of manufacture 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m/min Feed length: 0 - 9999.99 mm Additional equipment: The machine was retrofitted with SIEMENS S7 control in 2009.

Stanje: rabljeno, Pressing force: 50 t Throat depth: 265 mm Lasdpfx Aowyplcsc Uof Stroke: 250 mm Installation height: 400 mm Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid approach speed: 32 mm/s Working speed: 6.3 mm/s Rapid return speed: 42 mm/s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control system, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation: Optionally available with HORST robot.

Stanje: rabljeno, Leto izdelave: 1971, številka stroja/vozila: 7130, Total pressing force: 60 t Throat depth: 275 mm Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Ljdpfxeuqcxne Ac Ueaf Table clamping surface approx.: 740 x 470 mm Strokes per minute: 14 - 100 min⁻¹ Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Stanje: rabljeno, Leto izdelave: 1970, Press force: 30 t Throat depth: 160 mm Ledpfxeuqc Ens Ac Uoaf Adjustable ram stroke: 20 - 45 mm Ram adjustment: 10 / 60 mm Shut height (stroke bottom, adjustment top): 220 mm Table clamping area approx.: 470 x 300 mm Ram clamping area approx.: 250 x 190 mm Strokes per minute: 80 - 240 min⁻¹ Power requirement: 4 kW Dimensions LxWxH: 1,400 x 1,800 x 2,000 mm Machine weight approx.: 2.67 t Standard equipment: The machine's electrical system was modernized in 2015.

Stanje: rabljeno, Leto izdelave: 1983, številka stroja/vozila: 5154, Total pressing force: 25 t Throat depth: 250 mm Ram stroke: 6 - 60 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 190 mm Clamping plate thickness: 50 mm Table clamping surface approx.: 500 x 400 mm Ram clamping surface approx.: 350 x 250 mm Ram bore (clamping pin hole): 40 H7 mm Strokes per minute: 160 min⁻¹ Dimensions (LxWxH): 1,300 x 1,500 x 1,995 mm Machine weight approx.: 2 t Additional features Tiltable press frame Ledpfx Aeuqc Hfec Uoaf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 160 t, hod: 150 mm, skupna masa: 19.000 kg, Oprema: CE označba, Enotočkovna kolenska hidravlična stiskalnica z dodatno opremo. Odvijalnik, ravnalo, podajalnik in varnostne ograje. Proizvajalec HANIL KNUCKLE PRESS CO LTD, Južna Koreja - 2018. Tip HKCA-160. Tlačna sila 1600 kN. Največja točka pritiska (R.T.P.) 4,0 mm pred spodnjo mrtvo točko. Gib bata 180 mm. Delovna hitrost 80 gibov/minuto. Največja višina matrice 450 mm. Nastavljivost bata 100 mm. Delovna miza 1300 x 700 mm x 140 mm debeline. Delovni bat 900 x 600 mm. Zračni tlak 5 barov. Dimenzije (Š x D x V) 2100 x 1800 x 3450 mm. Teža 19 ton. Glavni motor 15 kW. Lajdpfx Asy Twgzsc Usf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, moč: 8,75 kW (11,90 KM), stiskalna sila: 25 t, hod: 500 mm, obratovalna hitrost: 100 mm/s, hitrost vzvratne vožnje: 450 mm/s, širina mize: 630 mm, dolžina mize: 500 mm, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, razmak između stupova: 800 mm, skupna dolžina: 16.500 mm, skupna širina: 10.500 mm, skupna višina: 27.500 mm, skupna masa: 2.200 kg, hod blazine orodja: 160 mm, Hidravlična stiskalnica PYE 25 S1M z izmetalnikom. Leto proizvodnje 1987. Proizvajalec VEB Wema Zeulenroda (Nemčija). Parametri: Lodpfx Acetzwxds Uoaf Maksimalna stiskalna sila 25 ton. Delovni tlak 16 MPa. Zgornja miza 450 x 360 mm. Spodnja miza 630 x 500 mm. Prehod 800 mm. Hod bata 500 mm. Hitrost navzdol 100 mm/s. Hitrost navzgor 450 mm/s. Sila spodnjega izmetalnika 10 ton. Hod spodnjega izmetalnika 160 mm. Poraba moči 8,75 kW. Teža 2200 kg. Višina 2750 mm, dolžina 1650 mm, širina 1050 mm. Tehnično stanje stroja zelo dobro. Stroj po generalnem pregledu. Možen ogled in testiranje stroja v obratovanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 500 mm, obratovalna hitrost: 200 mm/s, hitrost vzvratne vožnje: 200 mm/s, širina mize: 750 mm, dolžina mize: 560 mm, širina plošče bata: 530 mm, dolžina plošče bata: 400 mm, skupna dolžina: 1.900 mm, skupna širina: 1.200 mm, skupna višina: 3.200 mm, skupna masa: 5.040 kg, Oprema: dokumentacija / priročnik, Hidravlična stiskalnica PYE 100 S1M z izmetalcem.\nProizvajalec: Werkzeugmachinen GmbH Zeulenroda (Nemčija), leto 1990.\nParametri:\nMaksimalna stiskalna sila: 100 ton.\nDelovni tlak: 16 MPa.\nMaksimalna izmetalna sila: 40 ton.\nHod batnice izmetalca: 200 mm.\nZgornja miza: 530x400 mm.\nSpodnja miza: 750x560 mm.\nSvetla odprtina: 800 mm.\nHod cilindra: 500 mm.\nHitrost navzdol: 200 mm/s.\nHitrost navzgor: 200 mm/s.\nPotreba po moči: 17 kW.\nTeža: 5040 kg.\nVišina: 3200 mm, Dolžina: 1900 mm, Širina: 1200 mm. Ljdpfeygtzyjx Ac Uoaf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, hod: 500 mm, obratovalna hitrost: 100 mm/s, hitrost vzvratne vožnje: 450 mm/s, širina mize: 630 mm, dolžina mize: 500 mm, širina plošče bata: 450 mm, dolžina plošče bata: 380 mm, kapaciteta rezervoarja za olje: 300 l, skupna dolžina: 1.150 mm, skupna širina: 1.750 mm, skupna višina: 3.050 mm, skupna masa: 3.200 kg, razdalja med stojali: 800 mm, Oprema: dokumentacija / priročnik, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture: 1986. Manufacturer: VEB Wema Zeulenroda (Germany). Machine after complete overhaul. Piston seal replaced. Specifications: - Maximum pressing force: 40 tons - Operating pressure: 16 MPa - Upper table: 380 x 450 mm - Lower table: 500 x 630 mm - Daylight opening: 800 mm - Cylinder stroke: 500 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Ejector stroke: 200 mm Laedpjwbt Uqefx Ac Uof - Ejector force: 16 tons - Power requirement: 13 kW - Weight: 3180 kg - Height: 3050 mm, Length: 1750 mm, Width: 1150 mm Technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and functional testing of the machine are possible by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Specifikacije Proizvajalec: IMV Model: DM125 Leto: 2016 Stanje: Rabljeno Skladiščna številka: 0396 Sila drsnika: 1.250 ton Število pritiskov: 2 Kinematika: Ekscentrična, menjava hoda Hod drsnika: 250-400 mm Lasdpfxoyw Uf Ae Ac Ujf Število udarcev/min: 5-35 VERTIKALNA SVETLOBA od držala za matrico, CBRA: 1.150 mm Dimenzije mize: 4.500 x 2.000 mm Dimenzija drsnika: 4.500 x 2.000 mm Stranska odprtina okvirja: 2.600 mm Maks. odprtina sprednjih stebrov: 4.900 mm Premični voziček: 2 kosa Moč glavnega motorja: 290 kW Teža preše: 310.000 kg

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Pressing force 800 kN, stroke adjustment 30 - 240 mm, ram adjustment 80 mm, strokes 30 - 90 / min, table 1,200 x 800 mm, through-hole 350 x 370 mm, ram size 900 x 450 mm, throat depth 410 mm, max. table-to-ram 695 mm, ejector, ejector stroke 70 mm, ram weight compensation, oil-air cooling system, safety control III. Height 3,600 mm Width 1,660 mm Depth 2,400 mm Weight 12,100 kg Laedpfx Aceiuxwqe Uef

Stanje: rabljeno, Leto izdelave: 1964, številka stroja/vozila: 64 / 39.9037 / 2, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 1.200 t, hod: 600 mm, širina mize: 4.500 mm, dolžina mize: 2.700 mm, tabela razdalj do bata: 1.600 mm, razmak između stupova: 5.200 mm, skupna masa: 400.000 kg, Oprema: dokumentacija / priročnik, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 600 mm Strokes per minute: approx. 9 spm Shut height: approx. 1,600 mm Laodpfoy An H Rex Ac Usf Drawing device: Cushion force: approx. 225 t Cushion stroke: approx. 200 mm Pneumatic ejector in ram: Ejector force: approx. 95 t Ejector stroke: approx. 150 mm Heavy-duty mechanical eccentric drawing press in robust double-column design from Schuler, engineered for continuous industrial operation in the automotive sector. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and an additional 600 mm ram adjustment. Stroke rate is approx. 9 strokes per minute. The shut height is approx. 1,600 mm, allowing processing of large-volume dies and components. Particularly noteworthy is the large working area with a bolster size of approx. 4,500 mm and a movable/slide-out press bed, significantly facilitating tool setup and changeover, making the press ideally suited for handling heavy tooling. The integrated drawing device (cushion) provides a cushion force of approx. 225 t with a stroke of approx. 200 mm, enabling demanding drawing and forming operations typically required in automotive body manufacturing. Additionally, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. The press has not been operated in continuous production at the current location since the 1990s and was used exclusively for testing purposes.

Stanje: dober (rabljeno), stiskalna sila: 100 t, skupna širina: 3.000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operateur Year of manufacture: 2007 Long-stroke CNC press brake 8-axis controlled ASTRO 50Y AMADA Robot The ASTRO 50 Y bending cell is comprised of an HFE press brake combined with a 7-axis robot. Ideal for processing medium/thin gauge and large-dimension components. This machine is highly versatile thanks to a 4-meter linear axis and multiple grippers. Programming is exceptionally user-friendly via EASY CAM software. CE-compliant safety fencing surrounds the machine and robot. Specifications (Metric / US Standard) There are currently no specifications available for this machine. Approximate Dimensions: Length: 8000 mm Width: 4000 mm Lasdpfxjvwcdus Ac Uef Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. Details are given in good faith; accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend that you verify all critical details.

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H) 3450 x 1550 x 2950 mm Weight 4,500 kg Total power requirement 1.6 kW Upper Platen Press SOLID 1330 UPC PRO - Table size: 1300 x 3000 mm Lodpfxjvz Hyze Ac Ujaf - Total pressing force: 80 t - 6 hydraulic cylinders Ø 80 mm - Piston stroke: 600 mm - Max. opening width: 1300 mm - Hydraulic pump: 1.5 kW - Pressure gauge with target and actual value indicators - Pressing pressure from top to bottom - Two-hand safety control, CE compliant - Safety pull-cord, CE compliant - Including infeed and outfeed roller conveyor - Total length with infeed and outfeed roller conveyor: 7200 mm - Dimensions: L = 3,450 mm, W = 1,550 mm, H = 2,950 mm - Weight: 4,500 kg

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 4450 x 1550 x 2950 mm Weight: 4800 kg Total power requirement: 1.6 kW Top Ram Press SOLID 1340 UPC PRO Laedpfx Acovz Hy Io Ujf - Table size: 1300 x 4000 mm - Total pressing force: 110 tons - 8 hydraulic cylinders, Ø 80 mm - Stroke: 600 mm - Maximum opening width: 1300 mm - Hydraulic pump: 1.5 kW - Pressure gauge with setpoint and actual value indicators - Pressing pressure applied from top to bottom - Two-hand safety control, CE compliant - Safety pull cord, CE conformity - Including infeed and outfeed roller conveyor - Total length with infeed and outfeed roller conveyor: 7200 mm - Dimensions: L = 4450 mm, W = 1550 mm, H = 2950 mm - Weight: 4800 kg

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 1300 x 800 x 1350 mm Weight: 370 kg Total power requirement: 0 kW Mini Dovetail Press RCM DELUXE Laedpfx Acjv A E Nkj Usf - Maximum workpiece height: 200 mm - 4 clamping cylinders for workpiece clamping, switchable in pairs - Table size left: L = 500 mm, W = 400 mm - Table size right: L = 500 mm, W = 400 mm - Stroke of right table: 40 mm - Cylinder stroke: 80 mm - Pneumatic connection: 8 bar - Adjustable angles: 0°, 22.5°, 33° - Foot pedal for clamping and releasing - CE compliant version - Dimensions (L = 1300 mm, W = 800 mm, H = 1350 mm) - Weight: 370 kg

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 2950 x 1550 x 2950 mm Weight: 4000 kg Total power requirement: 1.6 kW Laedsvz Hyuepfx Ac Ujf Top Ram Press SOLID 1325 UPC PRO - Table size: 1300 x 2500 mm - Total pressing force: 80 t - 6 hydraulic cylinders, Ø 80 mm - Ram stroke: 600 mm - Max. opening: 1300 mm - Hydraulic pump: 1.5 kW - Pressure gauge with setpoint and actual value indicators - Pressing force applied from top to bottom - Two-hand safety control, CE compliant - Emergency safety cord, CE compliant - Including infeed and outfeed roller conveyors - Total length with infeed and outfeed roller conveyors: 5700 mm - Dimensions: L = 2950 mm, W = 1550 mm, H = 2950 mm - Weight: 4000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, A stainless steel filter system with pneumatic cleaning in very good condition. Filter surface: 50 m². Material: V4A (1.4571) 316TI Laodpfx Aefg Iphoc Ujf Installed stainless steel radial fan, drive power 22 kW; Airflow: 6,700 m³/h; Pressure: 8,000 Pa Compressed air valves: ASCO 24 Volt Number of filter bags: 48 Filter medium: not included Insulation: Yes With differential pressure measurement Dimensions (L/W/H): 3,000 mm / 1,700 mm / 2,100 mm (up to outlet) The filter consists of 2 modules split in the middle. Also available: stainless steel cooling screw conveyor, Ø400 mm; length 4,100 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Proizvajalec: ROVETTA Model: S4-800 Leto: 2001 Stanje: Rabljeno Številka zaloge: 0392 Proizvajalec: Rovetta Sila drsnega bloka: 800 ton Število potisnih točk: 4 Hod drsnega bloka: 700 mm Nastavitev drsnega bloka: 350 mm Lasdpfx Ajyq Tdpjc Uef Število udarcev/min: 10-24 Višina orodja pri spodnjem gibu in zgornjem položaju drsnika: 1.100 mm Uporabna razdalja med sprednjima stebroma: 4.200 mm Dimenzija mize za orodje: 4.000 x 2.000 mm Dimenzija drsnika: 4.000 x 2.000 mm Višina premične mize: 600 mm Dimenzija stranskega okna: 3.400 x 1.900 mm Število blazin: 1 Sila hidravlične blazine (skupaj): 150 ton Hod spodnje hidravlične blazine: 250 mm Delovno območje spodnje hidravlične blazine: 1.500 x 1.000 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Proizvajalec: ROVETTA Model: S4-1500 Link Drive Leto: 2001 Stanje: Rabljeno Inventarna številka: 0391 Izdelovalec: Rovetta Število batov: 4 Lajdpfx Asyq Tdijc Uef Sila drsnika: 1500 ton Hod drsnika: 763 mm Nastavitev drsnika: 400 mm Svetla višina spodnji hod/zgornja nastavitev: 1.200 mm Razdalja med sprednjimi stebri: 5.700 mm Dimenzija mize za orodja: 5.500 x 2.500 mm Dimenzija drsnika: 5.500 x 2.500 mm Višina premične mize: 600 mm Dimenzija stranskega okna: 3.400 x 1.900 mm Moč glavnega motorja: 319 kW Sila spodnjega pritisnega blazinica: 150 ton Hod spodnjega pritisnega blazinica: 250 mm Delovno območje spodnjega pritisnega blazinica: 2.000 x 1.200 mm Število udarcev/min: 8-24

Leto izdelave: 1993, stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Lasdpfx Asihf R Ujc Uef Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm