Filtrirna naprava z vrečastim filtrom iz nerjavečega jekla

Aerob 50m² 6700m³/h AAS 2.12

Leto izdelave: 2024, Stanje: novo, LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough-hard, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many, many more! Pgsdpfx Aog Ay Ayogpow

Stanje: novo, Table diameter 315 mm Horizontal table load 50 kg Pgsdpfxsi Hg I Dj Agpjw Vertical table load 25 kg Chuck diameter 200 mm Speed 0 - 5 rpm, steplessly adjustable Swivel range 90 degrees Tilt adjustment: manual/motorized manual Connection voltage 230 V Machine weight approx. 45 kg Space requirement approx. 800 x 600 x 600 mm Welding turntable with - Integrated stand and universal torch holder - Quick-action chuck 200 mm - Foot switch - Manually tiltable/swivable - Stepless speed adjustment

Stanje: rabljeno, Plant: Inclined Plate Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates made of PP Dimensions: LxWxH 7580x2435x3000 mm Pgedpsppyhtofx Agpew Weight: approx. 8,000 kg Principle: The wastewater is fed into the inlet of the inclined plate clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected below the plates and flows upwards through the lamella. Solids settle onto the lamella plates and slide downwards along the plates into the sludge hopper. The clarified water is transported to the outlet. Rake mechanism: Optionally, we offer the inclined plate clarifier with a rake mechanism to keep the sludge in a flowable state. Application: Separation of solids and liquids by sedimentation. Inclined plate clarifiers are often used as a preliminary stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be dimensioned smaller in terms of filter area. The system is in good condition and available for rent or purchase. Inspection at our facility can be arranged by appointment. We also offer new inclined plate clarifiers with a delivery time of approx. 8 to 10 weeks!

Leto izdelave: 2002, Stanje: skoraj kot novo (rabljeno), L x W x H: approx. 12.1 x 3.0 x 3.25 m Volume: 55 cbm Conveying capacity: approx. 150 m³/h 6 dosing/discharge screws – driven in pairs, each with 11 kW Weight: approx. 15 t Pedpfxellvpzs Agpjgw Previously operated in an RDF facility

Stanje: rabljeno, številka stroja/vozila: 11481, Rotor diameter: 300 mm Podpfjghgmzox Agpsgw Rotor width: 600 mm 3-knife rotor 4 rows of stator knives Feed opening approx. 250 x 600 mm Drive motor 37 kW

Stanje: novo, Bunker conveyor system suitable for feeding balers, shredders, etc. Europe-wide delivery available. Technical specifications: Item 1: Feed hopper Item 2: Feed conveyor, 1.5 kW, belt width: 1100 mm, axle spacing: 3500 mm Pedpfx Agsdxwlqjpsgw Item 3: Inclined conveyor, 1.1 kW, belt width: 1100 mm, axle spacing: 4700 mm Standard discharge height: 2800 mm (greater height possible with spacer feet as shown in the illustration) Made to order Further information and data available on request

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Aluminum angle conveyor with substructure Horizontal section: 3,000 mm Inclined section: 5,000 mm Angle of inclination at bend: 35°, 40°, or 45° Total conveyor length: - Discharge height: - Height of horizontal section: - Conveyor belt width: 600 mm (extendable) Drive roller + return roller Ø150x620 mm, S235 steel, welded and machined Steel return roller at bend mounted and crown-turned Reinforced aluminum profile frame 135x45 mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge, petrol matt Drive: 1.1 kW motor, speed 0.3 m/sec Pgedpfxoi Igzfe Agpew Connection 230/400V, 50 Hz, protection class IP54 Fully wired drive unit with motor 2 pcs. corrugated sidewalls 80x45 mm 39 pcs. T60 carriers, spacing 401 mm 2-ply, extra cross-stable Usable width 470 mm, calculated as follows: Transverse arrangement -70+45-50+470+50+45-70 mm

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: Pgedpfx Agsh A Sfdepjw 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Leto izdelave: 1986, Stanje: generalkompletno obnovljen (rabljeno), Chamber filter press, completely overhauled with stainless steel lining, 82 filter plates made of PP (food-grade), 30 mm cake thickness, press volume approx. 1,100 liters, filter area 96 m², fitted with new filter cloths, max. 15 bar feed pressure possible, closed discharge via 2 diagonal corner bores, automatic plate shifting and filter cloth washing system in stainless steel, 100 bar high-pressure pump, Manzini piston pump (MC-100 in stainless steel) for filling, with stainless steel base frame for elevation, control cabinet. Pedpfx Agen Dw Nkspsgw

Stanje: zelo dobro (rabljeno), Heating boiler Loos UT 5200 kW incl. oil burner Pgjdemn Hpyepfx Agpow