Siemens Dvojni Kolut Za Cev Z 1X Merilnikom Pretoka nakup rabljenega (103.333)

Stanje: novo, Bending length: 1250 mm Sheet thickness: 4.5 mm Top roll diameter: 120 mm Technical data: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame constructed from St 52 steel - Main motor with brake system - Top and bottom rolls are driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron frame - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor: EUR 1,166 -- - Digital display for rear roll position: EUR 1,010 -- - Hardened rolls: EUR 823 -- - Special voltage: EUR 480 -- - Sheet feeder table - Bottom roll driven by electric motor Laodjd Ab Nzjpfx Al Noa We have many references!

Stanje: novo, Bending length: 2050 mm Sheet thickness: 3 mm Top roller diameter: 110 mm Technical data: - Rear roller motor-driven - Cone bending device - Hardened and polished rollers - The entire frame made of St 52 steel - Main motor with braking system - Top and bottom rollers are driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Rear and bottom roller movement operated manually - In compliance with CE standards Options: - Top roller driven by electric motor EUR 1,260 - Digital display for rear roller position EUR 1,010 - Hardened rollers EUR 1,136 - Special voltage EUR 480 - Sheet feeding table Laodpfod Ab N Asx Al Nsa - Bottom roller driven by electric motor We have a large number of references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Technical Data: - Rear roll motorized drive - Conical bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system Lsdpfed Ab N Eex Al Nsaa - Top and lower rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 - Digital display for rear roll position EURO 1,010 - Hardened rolls EURO 827 - Special voltage EURO 480 - Material feed table - Lower roll driven by electric motor We have numerous references!

Leto izdelave: 1963, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 512804, 1963 Bobst SP900E met dubbelwerkende stripper in redelijke/goede staat. Goed onderhouden; de afgelopen jaren zijn onder andere de tandwielen, hoofdgrijperkettingen, tegenplaat onder de snijplaat en cardankoppelingen naar de aanvoerkop vernieuwd (originele Bobst onderdelen). De grijperbalken zijn de laatste tijd niet vervangen, maar verkeren nog in goede staat. De kniegewrichten vertonen vrijwel geen slijtage; deze zijn vermoedelijk eerder vervangen en de machine is daarna weinig gebruikt. Er zitten nauwelijks krassen op. Lasdetyqizepfx Al Nsa De machine is gedemonteerd opgeslagen in ons magazijn in Zuid-Nederland; dus momenteel niet aangesloten op stroom. Bij serieuze interesse van een potentiële koper zullen wij de machine verder opwaarderen, assembleren en de mogelijkheid bieden deze naar wens uitvoerig te testen. In dat geval bedraagt de prijs 22.000 euro, geladen op uw transportmiddel, EX WORKS.

Stanje: kot nova (razstavni stroj), The KHT H 3010 CNC with sheet support unit is a state-of-the-art hydraulic guillotine shear, developed specifically for professional applications in the category of guillotine and plate shears. This precision machine from KNUTH features CNC-controlled operation, allowing for intuitive control via a touchscreen. Key features include programmable blade gap adjustment and backgauge, enabling precise processing of sheet thicknesses up to 10 mm with a maximum material strength of 450 N/mm². The robust, heavy-duty welded machine frame minimizes deflection and extends the machine’s service life. Additionally, the integrated sheet support unit ensures easy handling of thin sheets. Standard equipment includes upper and lower blades suitable for stainless steel, as well as comprehensive safety features compliant with the latest CE regulations. For efficient operation, you can now request the KHT H 3010 CNC online and benefit from the robust quality and performance of this hydraulic guillotine shear. Lasdpfx Asq I Nb Tjl Noa

Stanje: pripravljen za uporabo (rabljen), Uciosarko - U2PRW Drilling and Cutting Machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in a semi-automatic cycle. During each working cycle, the machine performs: cutting at a set angle (between 45° and 90°) and drilling in the mitered plane or on the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of material: 60 mm Ljdpjq Ii Dlofx Al Nsaa - Max. width of material at 45°: 70 mm - Max. width of material at 90°: 150 mm - Max. length of material: 2200 mm - Min. length of material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. bottom milling cutter diameter: 35 mm - Max. bottom milling depth: 15 mm - Mounting diameter for face drills and bottom milling cutter: 10 mm Drilling Head (Face Drilling): - Spindles: 4 - Spindle axis spacing: 32; 32; 40 mm - Spindle layout: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (L/W/H): 4300 / 1600 / 1570 mm Machining Units The machine is equipped with two machining units. The left unit is fixed; the right unit is movable. Each machining unit consists of the following subassemblies: main saw, scoring saw, drilling unit for drilling in the mitered plane, and a drilling unit for bottom drilling. Bottom Drilling Unit (Optional) This unit is optional and used mainly when machining corner trims for adjustable-width door frames. It performs blind drilling for connector fittings. The photo shows a red cover that serves both as a base for angle strips and as a chip extraction cover. Workpiece Clamping The machine is equipped with a dual-plane clamping system, including both horizontal and vertical clamps. Horizontal clamps provide precise pushing to vertical references and straighten the workpiece; vertical clamps immobilize the workpiece during processing. Horizontal clamping always precedes vertical clamping. Control System The control system is clear, user-friendly, and functional. It allows for separate activation/deactivation of all units, as well as independent control of the left and right sides. All units have individual drives. The right machining unit is positioned by pressing control buttons on the operator panel. An electric motor with a gear mechanism and trapezoidal screw enables movement. Material length is set and read electronically, with an operator panel and digital display. The system also automatically adjusts measured values when changing cutting angles (45° and 90°), and performs automatic referencing.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 25392, Ponudba 25392 Tehnični podatki: - 2 delovni postaji za notranjo in zunanjo obdelavo - Notranje in zunanje posnemanje robov do 4 mm - 2 delovni hitrosti 100 + 200 1/min Lsdpfx Aleygk Tto Njaa - 2 vpenjalna vretena MK 3 - Pogon 400 V / 1,1 / 1,3 kW - Potrebni prostor pribl. Š 500 x G 550 x V 700 mm - Teža pribl. 70 kg - Delovna miza z 1 predalom in vrati: Š 1300 x G 840 x V 900 mm - Teža pribl. 150 kg

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MDY2310/110, DY2310/014, The compact FOBA M1000 manual laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small batch production. In addition to the automotive industry and metal, tool, and mechanical engineering sectors, this small, mobile, and universal marking machine is particularly well-suited for medical technology, plastics processing industries, and contract laser marking (e.g. promotional items). The M1000 enables economical and high-quality marking of both small metallic and plastic parts, as well as series production parts. This marking station, operated within Laser Class 1, features a program-controlled Z-axis, a compact worktable, and a smooth-running manual or optionally motorized lift door, allowing access to the workspace from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main fields of application Lajdsym Rdlepfx Al Noa Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g. promotional items). The M-Series offers advanced manual workstations for precise and efficient laser marking of small to large and geometrically complex workpieces as well as batches and small series. Two enclosure sizes (M2000 and M3000) and three models each (B: with worktable, R: with rotary table, P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for mark alignment, mark inspection, and code reading. High-throughput R-models: motorized Z-axis, dual-station rotary table – ideal for marking a wide range of serial parts (e.g. automotive interior elements, metal parts, tools, medical products such as implants or instruments). Main fields of application Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MY2001/012, Y2001/019, The compact FOBA M1000 manual laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small batch production. In addition to the automotive industry and metal, tool, and mechanical engineering sectors, this small, mobile, and universal marking machine is particularly well-suited for medical technology, plastics processing industries, and contract laser marking (e.g. promotional items). The M1000 enables economical and high-quality marking of both small metallic and plastic parts, as well as series production parts. This marking station, operated within Laser Class 1, features a program-controlled Z-axis, a compact worktable, and a smooth-running manual or optionally motorized lift door, allowing access to the workspace from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main fields of application Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g. promotional items). The M-Series offers advanced manual workstations for precise and efficient laser marking of small to large and geometrically complex workpieces as well as batches and small series. Two enclosure sizes (M2000 and M3000) and three models each (B: with worktable, R: with rotary table, P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for mark alignment, mark inspection, and code reading. Lodpfjym N Nmex Al Nsaa High-throughput R-models: motorized Z-axis, dual-station rotary table – ideal for marking a wide range of serial parts (e.g. automotive interior elements, metal parts, tools, medical products such as implants or instruments). Main fields of application Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Stanje: dober (rabljeno), Operational and on-site fuel stations available in sizes from 2,000 to 7,000 liters - Multiple units in stock - Used - Double-walled - Cleaned - DEKRA inspection available upon request - Pump or dispenser column optional Laodpfx Asil Hmusl Nea Loading and transport can be arranged. Only serious and legitimate inquiries will be answered. Please include your name, email address, and telephone number.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, delovna širina: 1.380 mm, skupna masa: 80 kg, lastna masa: 80 kg, obratovalna teža: 80 kg, Visokokakovostni stenski (čelni) ventilatorji z dimenzijami 1380 x 1380 x 450 mm in kapaciteto 44.500 m³. Moč motorja: 1,1 kW, trofazni. Ta izpušni ventilator je primeren za industrijske ali kmetijske aplikacije, pogosto uporabljen v prašičjih farmah, perutninskih hišah, rastlinjakih ali proizvodnih halah. • Naprava omogoča učinkovito prezračevanje z odstranjevanjem postanega zraka, odvečne vlage in neprijetnih vonjav. • Gre za ventilator „push-pull“, kar pomeni, da deluje kot izpihovalni in vpihovalni ventilator. • Konstrukcija iz pocinkane pločevine in zaščitna mreža zagotavljata vzdržljivost in varno delovanje. • Velik premer lopatic in zmogljiv motor omogočata visoko učinkovitost pretoka zraka. Laodpfx Aexuvatel Noa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Puhalo za transport blaga iz sušilnika do drobilnika, skozi zračni separator in naprej do pakiranja Laodpowqfxyofx Al Nea Puhalo 7,5 + 11 kW s frekvenčnim pretvornikom, dodatno puhalo 7,5 kW na voljo opcijsko 3 celične zapornice po 0,55 kW Kovinski okvir za drobilni sistem, razstavljen za transport s tovornjakom Krmilna omara za drobilni in zračni separacijski sistem, vhodni tok 32 A Sistem je razstavljen lastno sušenje zelišč se več ne izvaja - youtube short: Separacija, čiščenje zelišč, zračni separator za meto, žajbelj, meliso

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Rabljeni stroj za krivljenje cevi Jutec Tip: 5000 Kapaciteta: do pribl. 40 mm Dolžina trna: 4500 mm CNC vodenje Avtomatska glava Ledpfxsyfmwxo Al Nsaa Ročno vrtljiva glava s hidravličnim vpenjanjem Vključno s 3 kompleti orodij Letnik izdelave: 2009 Zelo malo uporabljen

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf Model: ZB 100/3 H – NC controlled Laodpfsd Ey A Aex Al Nja - Three driven rollers with knurled surface - Hydraulic adjustment of the top roller - Working positions: horizontal and vertical - Shafts mounted in tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameter: 215 mm - Shaft diameter: 60 mm - Shaft rotation speed: 6 rpm - Drive motor: 1.5 kW - Hydraulic cylinder pressing force: 180 kN - Bending capacity up to 80x15 mm edgewise - Round tube up to 100x2 mm - Angle iron: 70x70x8 mm - Weight: 800 kg NC Control: 2-axis control Touchscreen Storage for 1,000 programs with up to 19 steps each Interpolation

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Lasdst Hw Naspfx Al Nsa This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Stanje: rabljeno, Straightening machine for strip material from coil WANZKE Type RG 400-7 Strip processing line for coil operation Machine No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Lodpjxw Rcujfx Al Nsaa Roller width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roller width, straightening rolls: 408 mm Number of straightening rolls (top): 3 pieces (not driven) Number of straightening rolls (bottom): 4 pieces (driven) Straightening roll diameter: 50 mm Feed rolls: 2 pieces Ø 50 mm (bottom one driven) Feed roll width, top: 390 mm Feed roll width, bottom: 408 mm Strip speed: approx. 5 – 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain - Loop control with speed regulation in 2 stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of upper rollers via eccentric lever - Adjustable lateral strip guide on the entry side - 2 roller baskets for strip guiding - Electrical diagram included Space required for straightening machine with control: L x W x H 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Stanje: rabljeno, Good day, we are offering used clamping bars from Erowa, System 3R, and Becker Erodiertechnik. These clamping bars are suitable for wire EDM applications. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker Erodiertechnik SB430-SB680 The clamping devices show signs of use, but are in very good technical condition. Single item purchases are also possible. Spare parts and accessories are available. If you have any questions, please do not hesitate to contact us. Lodpfetk N E Ajx Al Nsaa

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 80706, Offre 25496 Machine d’usinage hydraulique universelle à deux stations – Cisaille d’angle + Unité de poinçonnage Caractéristiques techniques : Station 1 – Unité de cisaillement d’angle - Longueur de coupe jusqu’à : 220 mm - Épaisseur de coupe – Acier (résistance 400 N/mm²) : 6 mm - Angle de coupe réglable en continu au volant : 30° – 140° - Serrage pneumatique - Butées de positionnement gauche et droite - Surface de la table : 1020 x 940 mm - Avec rainures en T et butées de profondeur - Hauteur de la table env. : 920 mm Station 2 – Pliage ou poinçonnage - Force de pression max. : 200 kN - Vitesse de travail : 0 à 10 mm/sec - Capacité de pliage jusqu’à : 800 mm Laodpfjx I Nbgex Al Nsa - Capacité de poinçonnage : jusqu’à 50 mm dans tôle de 3 mm - Butées de profondeur - Entraînement : 400 V / 4 kW - Pédale électrique - Encombrement env. : L 1000 x H 1350 x P 1110 mm - Poids env. : 1100 kg

Stanje: rabljeno, Decoiler/Rewinder for Coil Material WANZKE CAMU Type SC 515/M Serial No. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gear ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gear, directly on the mandrel shaft - Geared motor with electrical brake Lajdpfx Alswvv Rqo Noa - Mandrel shaft with mechanical slip clutch, preset and adjustable via disc springs - Mandrel crown without band launch arms - No electrical control and without loop control switch Required space L x W x H: 1,300 x 800 x 1,230 mm Weight: 380 kg Good condition

Stanje: zelo dobro (rabljeno), LDS Type: V895-440 HBT900C with SPA50K Amplifier Technical Specifications: Armature Dimensions: 440 mm Sine Force Vector: 55.6 kN (peak) Random Force Vector: 55.6 kN (rms) Half Sine Force Vector: 166.8 kN (peak) Frequency Range: 0 to 2100 Hz Maximum Sine Acceleration: 981 m/s² Maximum Random Acceleration: 490 m/s² Maximum Velocity: 1.6 m/s Displacement: ±63.5 mm Moving Mass of Armature: 55 kg Maximum Load: 700 kg Amplifier Dimensions: W x H x D mm: 537 mm x 1905 mm x 895 mm Weight: 622 kg Slip Table: Working Surface: 900 mm x 900 mm Plate Thickness: 50 mm Plate Weight: 80.4 kg Maximum Load: 7250 kg Usable Frequency Range: 5-2000 Hz Condition: used Total Weight (table + shaker): approx. 7000 kg Shaker + Table Dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of Delivery: (see pictures) (Technical data may be subject to change and errors excepted!) Laodpfx Aouy H I Tol Nea For further questions, please feel free to contact us by phone.

Leto izdelave: 1993, stanje: rabljeno, Pressure: 63 t Stroke: 10–80 mm Stroke rate: 65–400 strokes/min Ram adjustment: 80 mm Table area: 1030x550 mm Ram area: 920x450 mm Pass-through opening in table: 700x200 mm Installation height (bottom, ram adjustment top): 420 mm Machine weight approx. 10 t Double-column design, Double connecting rod, IMCO press force measuring system, Central lubrication Automatic stroke adjustment Motorized ram adjustment Wanzke decoiler Ljdpfxelp U E Re Al Njaa Rotary gripper feeder

Leto izdelave: 1981, stanje: rabljeno, Pressure: 20 t Stroke: 8–38 mm Strokes per minute: 100–1800 Table surface: 400 x 400 mm Table opening: 380 x 80 mm Table height: 1000 mm Machine weight: approx. 4 t Space requirements (WxDxH): approx. 1600 x 1600 x 3100 mm Lsdpfxjlp U Nmj Al Neaa Machine number: 6068

Leto izdelave: 1995, stanje: rabljeno, Pressure: 125 t Stroke: 10–80 mm Lajdpfolp U Nqjx Al Nsa Strokes per minute: 240 spm Ram adjustment: 80 mm Table surface: 850 x 600 mm Ram surface: 760 x 550 mm Pass-through opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Pin hole in ram: Ø 50 mm Total power requirement: kW Machine weight: approx. 13 t Required space (LxWxH): approx. 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Leto izdelave: 1981, stanje: rabljeno, Pressure: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Installation height (table bottom to ram adjustment top): 300 mm Ljdpfslp U R Isx Al Neaa Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram pin hole diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Stanje: rabljeno, Leto izdelave: 2010, Proizvajalec: Tranvis Leto izdelave: 2010 Tip: Enota za označevanje in preverjanje Datamatrix. Ledpfxsx R Aq Hs Al Noaa 1 glava za kodiranje/označevanje 1 Datamatrix bralna glava za kontrolo tiska 1 izmetni valj za izdelek s kontrolno celico