Oerlikon Sistem Varjenja nakup rabljenega (24.612)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Ta naprava je prilagojena podjetjem, ki iščejo enostavno in zanesljivo rešitev za pakiranje. Največja hitrost je do 1500 vrečk na uro. Enostavno upravljanje poteka v dveh enostavnih korakih: polnjenje vrečke od zgoraj in zapiranje vrečke. Naprodaj so Autobag vrečke v velikostih: 150 × 250: 1,5 milijona vrečk 200 × 320: 2,5 milijona vrečk Cena za polno euro paleto: 1 paleta: 0,025 € na vrečko 2 paleti: 0,019 € na vrečko 3 palete: 0,018 € na vrečko 4 palete: 0,017 € na vrečko 5 palet: 0,016 € na vrečko Hnedpfx Agor E Dpzo Aeu in tako naprej 10 ali več: 0,01 € na vrečko 1 milijon Autobag vrečk že od 0,01 € na kos Trenutno rezervirano

Stanje: zelo dobro (rabljeno), EUROWATER CSD reverse osmosis system for the production of demineralised water The reverse osmosis system can achieve a flow rate of up to 2.0 m³/h, producing demineralised water with a conductivity of less than 10 μS/cm. Storage tank with pump for clean water Conductivity meter for monitoring the water conductivity. Hodpjr Dthmofx Ag Ajnu

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6SE01001AC237AA7, skupna masa: 30 kg, skupna dolžina: 800 mm, skupna širina: 400 mm, skupna višina: 450 mm, vrsta zaščite (IP koda): IP20, Frequency Converter / AC Drive Sinamics G180 Hnsdpfx Agjwhbtus Aou 6SE01001AC237AA7-Z Year of manufacture: 2015 New/unused

Stanje: rabljeno, Slotted spindle, 2 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus Weinig Unicontrol 10 NC window production line, optionally with extensive tooling ----- Optionally available (with additional surcharge): IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors Technical manufacturer's description: ----- Pos. 1: Weinig Unicontrol 10 NC window production line ----- Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for edge rounding from above Horizontal rounding unit, bottom ----- Axial adjustment mechanically coupled to cross-cut saw 1st tenon and slot spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment via NC axis Home position below table: 5–10 mm Radial adjustment: fixed 2nd tenon and slot spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial adjustment via NC axis Radial adjustment via NC axis Home position below table: 5–10 mm 1st profile spindle (climb and counter climb) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Horizontal top profile milling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 130 mm Adjustment pneumatically to 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Vertical profile milling unit right, machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Adjustment pneumatically to 8 axial and radial positions Further accessories -----... Hsdpfjzawizjx Ag Ajnu

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: SICK Sistem: Sistem za pozicioniranje telesa Tip: RS259 Leto izdelave: 2019 Serijska številka: RS259-1/2019 Napajalna napetost: 230 V 50 Hz Nazivni tok: 1,5 A Krmilna napetost: 24 V DC Zaščitni razred: IP54 Senzorji: 4x SICK BPS5400-S Kataloška številka senzorja: 1099868 Kataloška številka krmilnika: 1099813 Sistem: BPS-EPAC Obseg dobave: krmilna omara, 4 merilne enote, priključni kabel Stanje: dobro, redko uporabljeno Lokacija: Fulda Hjdpfx Aoyrunxsg Asnu

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Operating pressure: 12 bar Tank volume: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter) Hjdjvvvrpspfx Ag Asnu

Leto izdelave: 1981, stanje: rabljeno, Technical details: Load capacity: 0.63 t Fork length: 680 mm Machine weight approx.: 55 kg Dimensions (L x W x H): approx. 0.8 x 0.7 x 1.0 m This is a crane fork/loading fork. Crane fork size: L 730 x W 60 mm, U-shape, center position 560 mm Crane attachment = swivel construction with damping cylinder Ø 80 x 180 mm; crane hook mount Ø 30 x 80 mm Hnsdpfxjvwipqs Ag Aju 4x adjustment brackets on the rear side

Stanje: rabljeno, Leto izdelave: 2006, Technical Details: Voltage: 380 V Number of stations: 1 unit Total power requirement: approx. 2.0 kW Hsdpfx Ageu Nu Ime Ajnu Machine weight approx.: 160 kg Machine dimensions: 0.85 x 0.85 x 1.0 m Vibratory Bowl Feeder Washing module (vibratory technology bowl feeder) with heating - Suitable for cleaning small parts. - Drum size: diameter 300 mm, height 150 mm - Discharge: automatic via auger guide - Tank: 560 x 460 x 280 mm, capacity approx. 60 liters; with fill level indicator - Features: rotating dirt separator - Table: 800 x 600 mm; table height 640 mm; drip tray 750 x 550 mm - Guide rail width approx. 25 mm

Stanje: rabljeno, Technical details: Material diameter (min-max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 units Blasting hours: approx. 200 Space requirement: total height approx. 4.5 m Connected load: approx. 40 kW Hodju Nu I Tspfx Ag Asnu CONTINUOUS SPRING SHOT BLASTING SYSTEM (SPRING HARDENING) Application: For the blasting treatment/hardening of springs in a continuous process. The springs are conveyed through the blasting system by means of a drag chain which is exposed to the blasting stream. The conveying speed of the drag chain is adjustable. Very little used, approx. 200 operating hours The system consists of: - Machine housing, internal (high-alloy tool steel – hardened) with replaceable blasting plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Shot chamber length/depth: approx. 2000mm / approx. 670mm - Blast media: steel shot Ø 0.3 – 0.8mm - Material to be processed: springs Ø 20 – 30mm x L:70mm - Drive power of drag chain 1.1 kW - Conveyor speed max. 15 rpm - Initial shot media load approx. 500 kg (per system) - Connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted at extra cost) i.D.

Leto izdelave: 2003, stanje: rabljeno, Tehnične podrobnosti: Nazivna moč: 175 kVA Volumenski pretok: 100 m³/h Število obratov: 1500 obr/min Priključna napetost: 400 V Dimenzije D x Š x V: Kontejner: 3,0 x 2,6 x 2,6 m Hnjdpsu Nvb Iofx Ag Aeu Naprava za čiščenje plina vključno z 10-futnim kontejnerjem Uporaba: Za čiščenje bioplinov iz organskih silicijevih spojin in vodikovega sulfida. Naprava za povečanje plinskega tlaka, proizvajalec Muche GmbH Obseg dobave Aktivno ogleni filter Hlajenje Danvoss; poraba zraka 2.800 m³/h; hladilno sredstvo R 134a Izmenjevalnik toplote Renzmann&Grünwald Kondenzator ID Kompresor MTZ22-4VI Krmilna omara Na voljo kot prikazano.

Stanje: rabljeno, Technical Details: Hnodju Nwvtspfx Ag Asu Intake Nozzle Diameter: 150x80 mm Connection: 380-420 V Total Power Requirement: 0.35 kW Dimensions (LxWxH): 950x500x680 mm Dust Extraction Unit with Fan Fan: Size Ø=500x300 mm; Exhaust Outlet Ø=160 mm Filter: - 2 pieces, size 300x120x500 mm, filter chamber size W:300xD:260xH:520 mm - Intake nozzle diameter 150x80 mm.

Stanje: rabljeno, Technical details: Intake nozzle diameter: 380 mm Filter area: 610 x 660 + 560 x 470 + 570 x 470 mm Total power requirement: 4.0 kW Dimensions (L x W x H): 0.6 x 1.1 x 2.2 m - 2x intake nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170 mm - Exhaust opening (W x H): 280 x 145 mm Hnjdpfx Agou Nwwdj Aeu - 3 insert filters - with wall mounting

Stanje: rabljeno, Technical details: Tank capacity: - l Hnsdpfx Agju Nw Ene Aeu Voltage: 230 / 50 V / Hz Approximate machine weight: System is dismantled kg REVERSE OSMOSIS SYSTEM The system is dismantled. We are selling the system/parts at a clearance price! Possible applications, e.g.: All types of contaminants are filtered. E.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014 a.s.o.

Stanje: rabljeno, Leto izdelave: 2002, Technical details: Rated power: 1670 kVA Hnsdju Nzwuspfx Ag Aou Rated output: 1500 kW Voltage: 400 V / 50 Hz Operating hours: 800 h This UPS system is ideally suited for uninterrupted operation under demanding environmental conditions, such as those often found in industrial applications. It is suitable, among other uses, for stabilizing power supply systems. The UPS unit consists of the Powerbridge (a flywheel with integrated generator) and a Uniblock (electromotor/generator block). The Uniblock supplies power to customer modules without grid faults. The Powerbridge serves as the energy storage unit. In the event of a mains failure, the Powerbridge temporarily takes over the power supply (at full load, power supply is maintained for 39 seconds). Energy storage type PB60+ with a bridging time of 39 seconds. A diesel engine is connected via a freewheel clutch. This means that, as soon as the engine reaches the speed of the Uniblock, it brings the generator up to synchronous speed and thus takes over the power supply. (At the same time, the Powerbridge is recharged with energy)

Leto izdelave: 1998, stanje: rabljeno, Technical details: Total power requirement: 1.1 kW Airflow volume: 900 m³/h Filter area: 6.0 m² Filter: 1 unit Machine weight approx.: 125 kg Dimensions L x W x H: 0.74 x 0.62 x 1.8 m Fields of application: Extraction of grinding dust, with other filter inserts also suitable for welding fume extraction - Mobile unit on castors - With collection container for coarse particles - Cleaning interval adjustable up to 60 sec - Pulse cleaning, automatic after shutdown of the unit - Filtering separator Further technical specifications: - Separation surface 6.0 m² - Separation efficiency above 99% Hedpfxeu N Ad No Ag Aenu - Cleaned air remains in the working area - The device contains a cartridge filter Ø 400mm, length 270mm - Filter change by hand (maintenance door)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Saddle-stitching and folding station Horizon SPF10II with trimmer FC10II and shingle delivery Hnsdpfx Agewpimro Asu

Leto izdelave: 1998, stanje: rabljeno, Temperature: 200-210 °C Conveyor Speed: 1000 mm/min Max. Workpiece Length: 200 mm Total Power Requirement: 50 kW Machine Weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD and/or mixed technology) and for curing SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - Equipped with software functions - Can be integrated into a production line Further technical specifications: - Shielding gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical supply: 12 kW - Space requirement: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with reloading head and discharge belt for accommodating, for example, printed circuit boards. Hsdpfx Agju Rwauo Asnu - Machine is CE98 certified System suitable as a donor for spare parts or for conversion/expansion. Sale as is. Priced for quick sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 113018006121, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Optični merilni sistem z objektivi 1900WD30, 800WD17, 400WD19 in 150WD11 Hodpozwuxaofx Ag Aonu Rotacijska enota z vpenjalnim sistemom EROWA Obročasta osvetlitev, primerna za vse objektive Avtomatiziran sistem za pobiranje in polaganje z 24 mesti, najnovejši programski paketi MetMax 4.0.1, Alicona Laboratory Measurement 11.0.1 in Inspect 2023 Na voljo sta 2 licence za program Inspect v obliki plavajoče licence Upravitelj avtomatizacije

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Moč motorja ventilatorja - 5,5 kW Filtrirna površina - 14,15 m² Hnjdpsz Hckysfx Ag Aeu Število vreč - 15 Dimenzije - 255x90x310 cm Napajanje - 380V Predvidena zmogljivost - 6500 m³/h Leto proizvodnje - 2025

Leto izdelave: 1997, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski sistem za nastavljanje za natančne profile, dolžine 4200 mm * Motorno pogonjeno nastavljalno priprava z elektronskim merjenjem dolžine * Robustna jeklena konstrukcija z valji, prevlečenimi s PVC-jem * Upravljanje preko konzole z avtomatskim ponovnim nastavljanjem Hodpfx Ajz H I D Sjg Aonu Sistem za nastavljanje Microbo omogoča natančno in avtomatisirano merjenje dolžine profilov pri žaganju/rezanju/itd. Električno pogonjena drsna priprava se premika po vodilu s krogličnimi ležaji in se nastavlja preko numerično nadzorovane krmilne enote, merjenje pa poteka natančno od sredine žaginega lista. Valji, prevlečeni s PVC-jem, ščitijo površino profila in olajšajo drsenje. Vse funkcije se lahko udobno upravljajo preko krmilne konzole.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 6 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: Spaleck Oberflächentechnik Model: Z1 Leto izdelave: 2024 Rabljen, v stanju kot nov Delovni čas: 6 ur Tehnični podatki po navedbah proizvajalca: Prostornina delovnega posode: 11 l Uporna prostornina: 7 l Število obratov krožnika: približno 280 vrt/min Hnjdpfxez H Rfxo Ag Aeu Moč pogona: 0,75 kW Višina delovnega posode: 1.000 mm Napetost: 400 V, 50 Hz Dimenzije (ŠxGxV): približno 530 x 950 x 1.350 mm Naprava je bila razstavljena in shranjena pri nas. Ogled je možen po dogovoru.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 vložki za Multifix, velikost C, Hsdoz D Sxhspfx Ag Aenu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Na voljo so naslednji notranji mikrometri Sylvac: 2–6 mm: 600 € 6–10 mm: 700 € Hnjdpfxjz D Aa Nj Ag Asu 10–20 mm: 800 € 20–50 mm: 1000 € 50–100 mm: 1700 € (maloprodajna cena leta 2024: 3480 €) 100–200 mm: 2000 € Notranji mikrometri so bili med uporabo preverjani vsaki dve leti. Prodaja zaradi zaprtja podjetja.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, Komajda uporabljen profesionalni 3D-skener. Hodpfxoz Ep I Ao Ag Aenu

Stanje: dober (rabljeno), Tehnični podatki o paletnem regalnem sistemu: Regalni sistem: Jungheinrich Tip: Esmena Tehnični podatki o postavitvi: Število regalnih vrst: 01 kos Dolžina na regalno vrsto: 53.433 mm Število polj na regalno vrsto: 05 kos Število nivojev, vključno z nivojem tal: 02 kosa Tehnični podatki o prostornini: Število paletnih mest na polje: 19 kos Število paletnih mest na vrsto: 228 kos Skupno število paletnih mest: 288 kos osnova za izračun: Pomočnik pri nalaganju: Evropaletna EN 13698-1 Dimenzije: 1.200 x 800 x 150 mm Skupna višina, vključno s paleto: ni določeno Teža na paleto (maks.): približno 800 kg Vsebina dobave: 20x stojala za paletne regale, rabljena Barva materiala: modra Profil okvirja: MX630 Dimenzije profila: 100 x 81,3 x 1,8 mm Razporeditev lukenj: 50 / 50 mm vključno s prečnimi in diagonalnimi oporniki, podnožja Stojala so predhodno sestavljena (vijakom pritrjena konstrukcija) Višina: 6.000 mm Globina: 1.100 mm 114x prečke za paletne regale, rabljene Barva materiala: rumena Profil okvirja: 116 x 40 mm Tip prečke: GNA 116x40 SEG5 Nosilci: 5 kavljev razdalja med nosilci: 2.707 mm maksimalna obremenitev na par prečk: 2.400 kg, pri enakomerno porazdeljeni obremenitvi. 228x varovalni vijaki, rabljeni Barva materiala: pocinkano (sendzimir) Za pritrditev vzdolžnih nosilcev in preprečevanje nenamernega izpadanja 80x kemični sidra, nova Proizvajalec: Hilti Označba tipa: HST2 M12x105/10 Izvedba: ogljikovo jeklo, pocinkano Odobreno za: beton s počeno strukturo 20x izravnalne plošče, rabljene Izvedba: popolnoma pocinkano za izravnavo stojal za regale, ki so postavljena na neravni podlagi 01x ploščica z navedbo obremenitve z navedbo obremenitve polj in nosilcev, proizvajalca in številko naročila Dimenzije: 420 x 297 x 3 mm Vaše kontaktne osebe pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Hodpfx Agez Ng E Ue Asnu Ta izdelek je na voljo samo za prevzem. Morebitni dodatni stroški za prevoz tega izdelka se obračunajo posebej, glede na kraj dostave oziroma obseg dobave. Za dodatne informacije se obrnite na nas.