Neff Dvostolpna Stiskalnica Za Vlečenje - Hidravlična nakup rabljenega (85.026)

Stanje: rabljeno, Leto izdelave: 1982, Presskraft 40 t Ständerweite 695 bzw. 215 mm Hub 100 mm Nwodpfxjtqqq Rs Agxof Tischaufspannfläche 650 x 440 mm Stößelfläche 580 x 285 mm Einbauhöhe 400 mm Gesamtleistungsbedarf 15 kW Maschinengewicht ca. t Abmessungen der Maschine (L x B x H): 1,63 x 1,05 x 2,61 m - mit Ziehkissen - mit SICK-Lichtschranke

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2000 x 1600 x 1500 mm Weight: 1550 kg Total power requirement: 11.5 kW Briquette Press BP-200 PRO - Briquette diameter: 80 mm Nwodpfx Agjvz Efvsxef - Hydraulic motor: 11.0 kW - Throughput: 90/250 kg/h - 7 cycles/min. at full capacity - Probe for material detection (automatic) - Maximum briquette length per impulse: 70 mm - Dual pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touchscreen - Operating hours counter - Screw channel mixer for material feed - Material hopper (L x W x H): 1880 x 1880 x 1030 mm - Voltage: 400 V / 50 Hz - Dimensions: L = 2000 mm, W = 1600 mm, H = 1500 mm - Weight: 1550 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 1170 x 1510 mm Nedpsvz Eqfjfx Agxjwf Weight: 650 kg Total power requirement: 6 kW Briquetting press BP-60 - Briquette diameter: 60 mm - Hydraulic motor: 5.5 kW - Throughput: 15–70 kg/h - Cylindrical material hopper, Ø 1000 mm - 7 cycles/min - Maximum briquette length: 60 mm - Pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touch screen - Operating hours counter - Voltage: 400 V / 50 Hz - Level sensor for automatic shut-off - Chrome-plated tongs - Dimensions: L = 1700, W = 1170, H = 1510 mm - Weight: 650 kg

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press Nwedpovprv Rjfx Agxof This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: rabljeno, Hydraulic Parallel-Motion Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Side opening between uprights: 650 mm Table size: 1560 x 1010 mm Ram area: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Nwjdswva I Hopfx Agxsf Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. daylight: 775 mm Table height above floor: 1000 mm Guide column diameter: 140 mm Clamping pin bore on ram: 64 mm Pressing speed: 0 to 10 mm/s, infinitely variable Return speed: 0 to 20 mm/s, infinitely variable Main motor power: 22 kW Control pump motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision parallel-motion control - Infinitely variable electrical stroke limitation (upper and lower, with digital travel measurement and position display) - Mechanical safety upholding device (prevents ram from lowering due to its own weight) - One-hand and two-hand operation - Electrical tool safety via signal contact - Pressure preset independent of stroke (via keyboard, digital pressure display) - Travel measurement system left and right with rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swivel-mounted screen - Stroke movement and press speed controllable via joystick - Separate hydraulic unit with electrical cabinet - Hydraulic draw cushion under press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required for press, upright: L x W x H = 1800 x 1010 x 3470 mm Space required for horizontal transport: L x W x H = 3500 x 1800 x 1200 mm Press net weight: 13 tons Space required for hydraulic unit: L x W x H = 1000 x 800 x 3040 mm Hydraulic unit net weight: approx. 1 ton The machine was used as a tool trial press in a toolmaking facility. Very good condition.

Stanje: rabljeno, Prodam profesionalen industrijski stroj. Hidravlična stiskalnica za upogibanje lesa. SNERVATORE 2000/120-70 uglednega italijanskega proizvajalca Vecchiato Valter & C. s.n.c. – specializiranega za hidravlične stiskalnice in naprave za upogibanje lesa. Tehnični podatki: • Model: SNERVATORE 2000/120-70 • Leto izdelave: 2008 • Moč: 2,2 kW • Napajanje: 380 V / 50 Hz • Največji tlak olja: 200 barov • Teža: cca 3150 kg • Serijska številka: 14/08 • Proizvedeno v: Italija. Masivna, težka industrijska konstrukcija, namenjena za intenzivno delo v mizarskih in proizvodnih obratih. Idealna za profesionalno obdelavo lesenih elementov. Nwjdpfxjx H Sz He Agxef

Stanje: rabljeno, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable regenerative raw materials, secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Platen stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber footprint: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Maximum bale height: 1100 mm Hydraulic operating pressure: 200 bar Motor power: 5.5 kW Connection: 400 V, 50 Hz, 12 A - Equipped with two hydraulic cylinders - Door locking by threaded spindle with handwheel Nwedpfx Agevq Rtkoxsf - Pressing operation only possible with closed chamber door - Two-hand operation for hydraulic ejection of finished bale - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compressed bale is automatically tipped onto a pallet - Only 62 operating hours Required space (L x W x H): 2120 x 1350 x 3220 mm Transport height with lowered hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in very good, as-new condition. The new price for this press at BEMA is EUR 22,200 net. The company BEMA also purchases packaging waste that you bale using this press.

Stanje: rabljeno, Hydraulic punch, punching frame for use with JOKA HP-S type punching units Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture: approx. 1995 Press force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punch unit width: max. 54 mm Punch unit installation height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - suitable for universal use of JOKA SW 20 or SWD 20 punching units - Throat depth of the punching units can be increased, units can be pushed through to the rear - Stroke release via electric two-hand operation - Hydraulic unit: HAWE, Type HCW 4 / 2.5-B 1/400-1 Nwedpfxoltrmue Agxsf - Mounted on mobile frame Space required (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Leto izdelave: 1978, stanje: rabljeno, Pressure: 25 t Nwsdpslp U Arjfx Agxof Gap width: 580 mm Stroke: 150 mm Installation height: 370 mm Table size: 560x400 mm Ram surface: 400x350 mm Pass-through opening in table: 80 mm Machine weight approx. 2.5 t Space requirement approx. 1500x500x2500 mm High-speed press Mechanical fixed stop Cutting impact damping Sick BWS for safety and cyclic operation Two-hand operation Foot operation Piece counter

Leto izdelave: 1977, stanje: rabljeno, Pressing force 200 t Upright distance 500 mm Stroke 150 mm Ram area 320 mm Table area 470x400 mm Machine weight approx. 12 t Space requirement approx. 2000x2000x2700 mm Sick BWS for guard and cycle operation Two-hand operation Mechanical fixed stop Pressure switch Nwedslp Uz Uepfx Agxsf Pressure holding time Rapid working stroke Approved for manual loading operations

Leto izdelave: 1979, stanje: rabljeno, Pressure: 160 t Upright distance: 850 mm Stroke: 400 mm Ram area: 800x700 mm Ejector stroke: 300 mm Ejector force: 20 t Table area: 800x700 mm Total power requirement: kW Machine weight approx. 12 t Space requirements approx. 1800x1800x4200 mm Nwjdpfx Agjlp Uz Rsxsf Sick BWS for protection and automatic/semi-automatic modes Blow-off function Ejector Mechanical fixed stop Stroke/pressure cut-off Pressure holding time Approved for manual loading operations

Stanje: rabljeno, Leto izdelave: 1991, Pressure 30 t Frame gap 1200 mm Stroke 500 mm Table surface 1200x1000 mm Ram surface 600x400 mm Table height 850 mm Nwjdpfswt Durex Agxef Pin hole in ram Ø 40 mm Machine weight approx. 4 t Space requirements (WxDxH) approx. 2400x2200x3400 mm BWS for safety and cycling operation Stroke and pressure shut-off

Leto izdelave: 1976, stanje: rabljeno, Pressure 250 t Upright gap 900 mm Stroke 300 mm Table size 850x900 mm Ram size 800x880 mm Nwodpelp U A Sofx Agxsf Stroke 300 mm Table height 1050 mm Machine number: 1554 Drawing cushion (150 mm stroke) Sick BWS for safety and automatic mode Mechanical depth stop Raziol strip lubrication system

Leto izdelave: 1976, stanje: rabljeno, Pressure: 100 t Frame width: 625 mm Stroke: 150 mm Table surface: 580x450 mm Ram surface: 580x340 mm Pass-through opening in table Ø 150 mm Table height: 850 mm Ram bore Ø 45 mm Side frame opening: 200x200 mm Machine weight approx. 6.0 t Nwjdpjlp U Euefx Agxof Space requirement (WxDxH): approx. 1300x1300x2750 mm Fixed stop adjustment Pressure and stroke limitation Two-hand operation Rapid/working stroke Rollbloc strips in the table Approved for manual loading operations

Stanje: rabljeno, Leto izdelave: 1980, Pressure: 20 t Column clearance: 450 mm Stroke: 100 mm Nwjdpovnwd Defx Agxjf Table area: 440 x 320 mm Ram area: Ø140 mm Through-hole in table: Ø50 mm Table height: 900 mm Pin hole in ram: Ø40 mm Total power requirement: 3 kW Machine weight: approx. 2 t Space requirements (LxWxH): approx. 1400 x 1200 x 2200 mm Sick light curtain for safety and cycle operation Mechanical fixed stop adjustment Stroke and pressure shut-off Two-hand operation Foot operation

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), 2 hydraulic clamps at the front Nwsdpfsg Ulahox Agxsf 2 hydraulic clamps at the side Maximum working area: 1650 x 2300

Leto izdelave: 1985, stanje: skoraj kot novo (rabljeno), Wanzke Hydraulic High-Speed Press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from Wanzke. This press is in like-new condition! Technical data: Manufacturer: Wanzke Model: SP/F 12 Press force: 120 kN Return force: 17.8 kN Nsdehgiyiepfx Agxjwf Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety clearance: 4 mm Accessories: Decoiler GM1

Leto izdelave: 1985, stanje: skoraj kot novo (rabljeno), Wanzke Hydraulic High-Speed Press SP/F12 Double Column Press. -WKG 499- Offered here is a hydraulic high-speed press from Wanzke. Njdpjhgiwnjfx Agxowf This press is in like-new condition! There are 2 presses mounted on one stand. Technical Data: Manufacturer: Wanzke Model: SP/F 12 Pressing force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety distance: 4 mm Strokes/min: Working stroke: 10 mm/sec Rapid traverse: 20 mm/sec Max. stroke: 100 mm Table size: 320 x 300 x 280 mm Accessories: Double decoiler, model GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. A total of 2 units available!

Stanje: skoraj kot novo (rabljeno), • Condition – used, after inspection Nsdpfjwlwr Ijx Agxowf • Manufacturer – ORMA • Model – C4 • Shelf dimensions: 250 x 120 cm • Maximum clearance between shelves: 490 mm • Shelves are flat, clean, with no dents or damage • 4 cylinders with a diameter of 55 mm • Maximum pressure: 150 bar • Pump motor: 1.1 kW • Glue curing timer • Shelves are liquid-heated • Possibility to power up and test the machine on site

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), stiskalna sila: 25 t, hod: 480 mm, obratovalna hitrost: 13 mm/s, hitrost vzvratne vožnje: 24 mm/s, širina mize: 780 mm, dolžina mize: 200 mm, kapaciteta rezervoarja za olje: 20 l, skupna dolžina: 10.400 mm, skupna širina: 7.800 mm, skupna višina: 23.000 mm, obratovalni tlak: 230 letvica, VEČNAMENSKA delavnica- / brooč stiskalnica Na voljo v 20 in 25 ton izvedbi. Njdst A Dznopfx Agxswf BAR-MAN 20: 3.450 evrov BAR-MAN 25: 3.990 evrov BAR-MAN je primeren za najrazličnejše namene. Uporablja se lahko za vzdrževalna dela, izdelavo utorov za pero, vpenjanje in iztiskanje ležajev ter še veliko več. S to zmogljivo stiskalnico delate v udobju in varnosti.

Stanje: novo, Visokotlačna spajkalna stiskalnica za proizvodnjo dolgih lesenih izdelkov Enostavna za uporabo Zgornja in spodnja plošča pritiskata hkrati Zelo kratek čas cikla Hidravlična enota s kapaciteto 35 ton Motor 7,5 kW Glava z pnevmatskim upravljanjem Največje dimenzije lesa 75 x 300 mm Dvoročni upravljalni modul Njdpfx Aspahmhsgxowf Ročno ekscentrično bočno vpenjanje Opcijsko dovodna in odvodna miza 2 m

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Nwjdpey Egkgofx Agxef Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Proizvodna linija za pelete na prodaj! Proizvajalec - GENERAL DIES. Zmogljivost - 2,5-3,0 t/h. Leto - 2021, s stiskalnico General Dies, ki še nikoli ni bila uporabljena (2026). Nwjdpfx Agey Hfy Noxsf

Stanje: novo, Leto izdelave: 2024, Stanje: novo Letnik izdelave: 2024 Številka zaloge: 7305 Dobavni rok: takoj, možnost predprodaje Država izvora: Italija Cena: 46.400 € Leasing obrok: 886,24 € Na zalogi: 1 Tlačna moč: 100 t Hod: 500 mm Bat: 700 x 350 mm Miza: 800 x 600 mm Vgradna višina: 500 mm Iztez: 300 mm Hitri pomik: 25 mm/s Delovna hitrost: 4 mm/s Motor: 4 kW Dolžina: 1900 mm Širina: 1200 mm Nodpfx Agowiry Isxowf Višina: 2600 mm Teža: 2100 kg Dvojno okroglo vodilo Miza in bat z T-utorom Dvoročno upravljanje Siemens PLC Manometer Navodila za uporabo Vključno s tlačnim stikalom

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €171,300 Leasing rate: €3,237.57 Press force: 400 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X axis Stroke: 365 mm Distance between uprights: 3,400 mm Side frame throat depth: 510 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 1,050 mm Table width: 154 mm Oil tank: 250 l Motor power: 37 kW Length: 5,750 mm Width: 2,110 mm Height: 3,640 mm Weight: 27,760 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (easy finger drawing of bending contour) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet blank - Graphic product and tool memory - Correction function - USB ports for backup and program transfer - PC software enabling programs to be created on PC and transferred to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC controlled crowning system Upper tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety system mounted on upper beam Sheet support arms on linear guides Equipment compliant with CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Greater stroke, installation height, and throat depth - Higher approach and return speeds of the upper beam - Faster backgauge speed - Backgauge fingers on double rather than single linear guides - More available options such as: additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem version, various CNC controls … PRICE FCA TURKEY OPTIONS: R axis R/Z1/Z2 axis Nwedowirfkepfx Agxjf DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files) CNC Control SKY22 CNC Control Delem DA-66 S CNC Control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability