Karmetal Kmt Craft 250 X 310 nakup rabljenega (69.101)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 37.000 mm, skupna širina: 4.000 mm, skupna višina: 3.750 mm, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec IG Line 4000 x 2500 mm (2001/2007), left/right, for triple-glazed units, models as per Lisec model catalogue and 4-sided stepped units: - RTVN-32/25WE, washing machine infeed (3.2 m length), year 2007 (!) - RTL-25VN, washing machine with 6 brushes for Low-E, including 1 hot water tank, 1 sand filter, and 1 blower, year 2007 (!) - RTVN-16/25ST, washing machine outfeed (1.6 m length), year 2007 (!) - RSVN-38/25A, frame setting zone, year 2001 - RTVN-15/25MZ, measuring zone for gas press, year 2001 - RTVN-11/25ST, infeed conveyor for gas press (or extension for measuring zone), year 2001 - FPS-36/25U2T, argon gas press, year 2001 - RTVN-16/25ST, gas press outfeed 1, year 2001 - RTVN-16/25ST, gas press outfeed 2, year 2001 - APKV-25/2, 2-lane cork applicator, year 2001 - RTVN-15/25VFE, sealing line infeed with glass and frame measuring device as well as barcode reader for special shapes, year 2001 - VFL-1DS/25, sealing robot, including options for triple-glazed units (2 sealing cycles), 4-sided stepped units (bottom 0–50 mm, front, rear, and top 0–140 mm) as well as special shapes as per the Lisec specials catalogue, Beckhoff PC, Lenze servo motors and controllers, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 Nlodpey Sv Sgjfx Ah Usb All machines were fully functional until dismantling and are now available from stock in Hofkirchen, Austria and from stock in Oroshaza, Hungary.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Centrifugalna črpalka, črpalka, KSB Etanorm mx 125-250 NA, rabljena naprava Skupne dimenzije: 1690 x 780 x 1000 mm Teža: 1000 kg Proizvajalec: KSB Tip: Etanorm mx 125-250 NA Leto izdelave: 2004 Njdpfxsuhl R Hs Ah Ujlb Električni podatki: 400 V; 50 Hz; 2980 obr./min; 110 kW; 190 A Dvižna višina: 75,5 m Črpalna zmogljivost: 5920 L/min

Stanje: rabljeno, Tehnične podrobnosti: Z-hod: 1250 mm Nlodpev U Un Hofx Ah Ujb Premer vrtenja nad ležiščem: 260 mm Premer obdelovanca nad ležiščem: 500 mm Premer obdelovanca nad suportom: 250 mm Višina konice nad ležiščem: 260 mm Dolžina rezkanja: 2000 mm Maks. modul: 8 / 12 Skupna potrebna moč: 9,5 kW Približna teža stroja: 3,8 t

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, MAZAK QUICK TURN NEXUS 250-II MY Maks. premer obdelave: 380 mm Maks. dolžina obdelave: 504 mm Maks. hitrost rezkanja: 4.500 vrt/min Maks. hitrost vretena: 4.000 vrt/min Maks. premer droga: 74 mm Stroj je opremljen z: - CNC krmilnik Mazatrol Matrix Nexus 2 - KITAGAWA trikovčeljustno vpenjalno glavo B-210, premer 254 mm - Tool Eye - C-os - Y-os - avtomatski lovilec delov - NC konjiček - ojačano črpalko za hladilno tekočino - transporter za odrezke MAYFRAN Nodpfx Ahoyy Ad Ee Ujlb - 8 kosov fiksnih nosilcev orodja - 2 kosa pogonskih nosilcev orodja

Stanje: rabljeno, prevoženi kilometri: 8.800 km, moč: 150 kW (203,94 KM), vrsta goriva: električni, vrsta prenosa: samodejen, skupna masa: 3.500 kg, prva registracija: 07/2024, barva: bela, vzmetenje: jeklo, število sedežev: 8, gorivo: elektrika, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, E07 Hill Start Assist, E7M MBUX Multimedia System, JB7 Parking Package with Rear View Camera, EY5 Mercedes-Benz Emergency Call System, EY6 Breakdown Management, B25 Electric Parking Brake, CM2 Bumpers and Attachments Painted in Vehicle Colour, FS5 Illuminated Vanity Mirrors, J2A Acoustic Environment Protection, RK8 Alloy Wheels 7 J x 17, 20-spoke Design, XO7 Mercedes-Benz Mobilo with DSB and GgD, T70 Child Safety Locks on Passenger Doors, T74 Entry Grab Handle, UR1 Seat Rail System with Quick Release, CF9 Basic Chassis Plus, V33 Carpet Flooring in Rear Compartment, E1E Digital Extra: Hard Disk Navigation, HH9 Semi-automatic Climate Control TEMPMATIC, V36 Roof Lining, E1D Digital Radio (DAB), Y10 First Aid Kit, IB6 Model Series C447 Vito/V-Class, 805 AEJ X4/1, ES2 12 V Socket in Boot/Cargo Area, VD5 Interior Roof Lining in Crystal Grey, E1T Touchpad, H00 Warm Air Duct to Passenger Compartment, F3Z Comfort Locking, IK3 Luxury Estate, HI1 Climate Zone 1 (Cold/Comfort), XY5 Model Year 5, US5 3-Seater Comfort Bench 2nd Row, Outer Seat Foldable, US4 3-Seater Comfort Bench 1st Row, Outer Seat Foldable, V44 Carpet Flooring in Front Cabin, W65 Tailgate, C6L Multifunction Steering Wheel, RM4 Comfort Tyres, Z42 Registered as Passenger Car, LA2 Light Assistant, RM7 Summer Tyres, HZ0 Electric Auxiliary Heater, ET4 Active Distance Assist DISTRONIC, J55 Seat Belt Warning Device for Front Passenger Seat, XZ2 Model Generation 2, EL9 2-way Speakers Front and Rear, ED4 Fleece Battery 12 V 92 Ah, T14 Active Catch for Sliding Door, W78 ., We are happy to provide you with an individual financing or leasing offer and will gladly take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage; partial repainting has been performed on the vehicle as part of preparation. No liability for printing or typing errors. Subject to errors and prior sale. ... more on our homepage Nedpfjxnvudjx Ah Uslb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 3.355 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 450 mm, premer struženja: 200 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 51 mm, potovalna razdalja osi X: 160 mm, pomik po osi Z: 450 mm, skupna masa: 3.800 kg, For sale is a CNC lathe by Gildemeister, model CTX 310 Eco. The machine is in very good condition and immediately ready for operation. Technical data: Year of manufacture: 2012 Operating hours: 3,355 h (see picture) Control: SIEMENS SINUMERIK 810D Powerline Max. turning diameter: 200 mm Max. swing diameter over bed: 330 mm Max. turning length: 450 mm X-axis travel: 160 mm Main spindle speed: 5,000 rpm Spindle bore: 51 mm Turret: 12-position turret (VDI 30) Driven tools: 1 driven tool station Speed of driven tools: approx. 4,500 rpm Rapid traverse X/Z: 30/30 m/min Dimensions: approx. 4200 mm x 1700 mm x 2300 mm Machine weight: approx. 3,800 kg Chip conveyor included in the offer Tool holders not included in the offer (can be offered separately) Transport and loading can be organized across Europe upon request and for an additional fee. Nlodpfjxf T N Tox Ah Uob Prices plus VAT Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website.

Stanje: rabljeno, Leto izdelave: 2006, Tlak 250 t Razdalja med stojali 3000 mm Hod 600 mm Razdalja med mizo in batom, zgornji hod 900 mm Površina mize 2500 x 1300 mm Višina mize nad tlemi 1050 mm Stranski prehod med stojali 1350 mm Površina bata 2500 x 1300 mm Hitrost spusta 500 mm/s Hitrost dviga 400 mm/s Delovna hitrost 36 - 64 mm/s Vsebnost olja 2700 l Pogonska moč 137,0 kW Teža 54,0 t Prostorske zahteve (ŠxGxV) 4,1 x 4,55 x 6,15 m z oljnohidravličnim pogonom, hidravličnim dušenjem reza, hidravličnim zaklepanjem bata Nedpfx Aovuuhash Uelb ni potrebna temeljna jama

Stanje: rabljeno, Z-conveyor, conveyor belt with metal link chain GÖSSLING Metal belt conveyor, belt conveyor, stand-alone conveyor Mach. No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Njdpfx Ahswvv Rws Ujlb Belt width: 400 mm Frame profile height: 70 mm Infeed width: 465 mm Infeed length (lower): approx. 1500 mm Conveyor incline length: approx. 800 mm Discharge (upper) conveyor length: approx. 600 mm Height difference: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Infeed height: approx. 1050 to 1270 mm Drive motor power: approx. 0.37 kW Power supply: 400 V, 50 Hz - Stainless steel metal link chain - Belt drive via NORD geared motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base frame - Mobile on swivel castors Required space (L x W x H): 3160 x 750 x mm Weight: 420 kg Good condition

Stanje: rabljeno, Cinta transportadora, transportador de banda, transportador de cinta, transportador de banda MFP Fördertechnik N° de máquina: 17565 Año de fabricación: 2018 Longitud útil: 3100 mm Anchura de banda: 600 mm Longitud de banda: aprox. 6400 mm Altura del perfil del marco: 35 mm Diámetro del rodillo de retorno: 20 mm Velocidad de la banda: 10 m/min a 45 m/min Altura de la cinta transportadora: aprox. 1120 mm Potencia del motor: 140 vatios Conexión eléctrica: 230 voltios, 50 Hz - Velocidad de banda regulable sin escalonamientos mediante potenciómetro en el convertidor de frecuencia ROFRE, tipo 897 - Marcha derecha-izquierda - Accionamiento de la cinta mediante motor de tambor INTERROLL Nljdpswrihnsfx Ah Ueb - Construcción robusta de chapa de acero con placa de acero cerrada bajo la cinta transportadora - 1 base regulable en altura HAACON con manivela manual, altura de la cinta aprox. 950 a 1150 mm - Base HAACON montada sobre placa de acero de longitud 750 mm x ancho 500 mm x grosor 30 mm - 1 pie de soporte fijo sin ajuste de altura como soporte de transporte - Totalmente móvil sobre ruedas fijas Dimensiones totales L x A x H: 3180 x 760 x 1150 mm Peso: 250 kg Buen estado

Stanje: rabljeno, Leto izdelave: 2002, Debelina ploče: 13 mm Dužina ploče: 3060 mm Motor: 30 kW Hodova/min: 12 Dimenzije (DxŠxV): 4000 x 2300 x 2600 mm Težina cca: 11.900 kg Baykal 3100x13 hidraulične makaze za lim – godina proizvodnje 2002 Ove snažne makaze karakterišu robusna konstrukcija i visoka preciznost. Zahvaljujući velikoj sopstvenoj težini, mašina obezbeđuje stabilan i rad bez vibracija – idealno za zahtevne poslove sečenja. Tehnički podaci: - Godina proizvodnje: 2002 Njdsy D U Dfjpfx Ah Uolb - Kapacitet sečenja (St 42): 13 mm - Dužina sečenja: 3060 mm - Snaga glavnog motora: 30 kW - Glavni napon: 380 V / 50 Hz / 3 faze - Sistemski pritisak: 260 bara Dimenzije i težina: - Širina: 2300 mm - Dužina: 4000 mm - Visina: 2600 mm - Težina: 11.900 kg Mašina je trenutno priključena na struju i može se u svakom trenutku pregledati ili testirati. Za više informacija ili dogovor o terminu za razgledanje, stojimo vam na raspolaganju.

Stanje: rabljeno, Leto izdelave: 2003, Turning diameter: 210 mm Turning length: 580 mm Control: Siemens 840 D Center height: 190 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 260 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 10 / 7.5 kW Max. torque: 115 / 86 Nm Spindle bore: 68.5 mm Usable bar diameter: 51 mm C-axis: 0.001° Travel - X: 185 mm Travel - Z: 455 mm Number of tool stations: 12 positions Tool holder: VDI 30 Driven tool stations: 6 positions Tailstock quill travel: 400 mm Max. drawbar force: 4,000 N Rapid traverse X/Z: 20 / 30 m/min Feed force: 4.5 kN Total connected load: 21 kW Machine weight approx.: 3.2 t Space requirements approx.: 8.0 x 2.2 x 2.0 m CNC Turning and Milling Center GILDEMEISTER - CTX 310 V3 - incl. IRCO Breuning bar loader Nedpfjtqmmuox Ah Uolb - incl. 2x collet chucks - incl. 2x three-jaw chucks incl. various soft and hard jaws - various VDI30 turning tool holders - various coolant pipes - approx. 20x 173E collets - Adapter sleeve for 185E collets (for bars up to Ø50) - 11x 185E collets

Stanje: novo, moč: 227 kW (308,63 KM), vrsta goriva: dizel, konfiguracija osi: 2 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.560 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, Specifications: - Extended day cab - Reinforced mechanical cab suspension - Halogen headlamps with double reflectors and shock-resistant Lexan lens covers - Headlamp beam pattern for right-hand traffic - Daytime running lights - Adjustable roof spoiler - Long side fenders - Cab color: E1980WHTE - Headlamp bezel and bumper color: Stone Grey - Lower/fender trims, cab steps, and mudguards: Stone Grey - Roof spoiler color: Crystal White - Side fender color: Crystal White - Chassis color: grey - Left-hand drive - Luxury air-suspended driver’s seat with adjustable damping and pneumatic lumbar support - Armrest for driver’s seat - Fixed co-driver’s seat - Engine tunnel storage compartment - Manually controlled air conditioning with recirculation function - Manually operated roof hatch - ECAS remote control - Universal FMS connector (Fleet Management System) with wiring for data readout as per the truck manufacturer’s FMS standard - 10-year PACCAR Connect subscription - Pre-installation for satellite communication system for German toll (fee collection system) - Digital (smart) VDO tachograph - Speed limiter setting for cruise control/accelerator: 90 km/h - DAF infotainment system - Combined antenna for AM/FM, GSM, and GPS; GSM radio bands 900 MHz, 1800 MHz, and GPRS - ACC (Adaptive Cruise Control) with FCW (Forward Collision Warning) and AEBS-3 (Advanced Emergency Braking System) - Driver Performance Assistant (DPA) - Speed limit recognition - DAF Drowsiness Detection - Lane Departure Warning System - Electronic Vehicle Stability Control (VSC) - Acoustic reversing warning device - Basic immobilizer - Hill start assist - Safety system to alert the driver to moving objects on the co-driver’s side - Front axle type 152N, with 100 mm offset. Parabolic suspension - Mechanical differential lock - Front axle tire size: 295/80R22.5, wheel size 22.5 x 8.25 - Driven rear axle(s): tire size 295/80R22.5, wheel size 22.5 x 8.25 - Supplier: Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Wheel trim rings without center section, silver-grey (RAL 9006) - Front axle tires: 295/80R22.5, Goodyear type KMAXS2 - Driven rear axle tires: 295/80R22.5, Goodyear type KMAXD2 - Spare wheel not applicable - PX-7 engine, 6-cylinder diesel, 6.7 liters. Output 227 kW (308 HP) at 2,300 rpm. Max. torque 1,190 Nm at 1,200–1,500 rpm - Emissions standard Euro 6 - Idle shutoff after 5 minutes of idling - PowerLine automatic transmission, 8-speed - PowerLine overdrive transmission 8AP1200, ratio 4.89–0.64, 8 gears - Automated transmission software optimized for standard transport applications. Transmission control version: Full. - Rear axle gear ratio 5.14 - ASR system Nsdpfx Asyqdkmjh Uslb - Parking brake actuator with test position - Wheelbase 5.85 m / rear overhang 2.68 m - Longitudinal frame member height 270 mm, thickness 8.0 mm. Without inner reinforcement. - Aluminum fuel tank, 340 liters - AdBlue® tank 30 l, mounted on the right chassis side - Wheel chock - Operation with drawbar, type plate, max. permissible GVW - Drawbar crossmember, D-value 85 kN, Dc-value 70 kN, V-value 25 kN. Trailer coupling D-value 85 kN. Crossmember and coupling - Pneumatic connection for trailer with swivel couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connecting the trailer/semitrailer EBS system - LED side marker lights

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Njdey Sl Dlspfx Ah Uelb Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 844 12 64, premer struženja nad prečnim suportom: 215 mm, izvrtina vretena: 40 mm, premer struženja: 380 mm, višina središča: 190 mm, širina na sredini: 1.250 mm, poteza s peresom: 120 mm, skupna dolžina: 3.020 mm, skupna širina: 950 mm, skupna višina: 1.500 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 14 obr/min, skupna masa: 1.850 kg, nosilec puše: MK 3, teža obdelovanca (maks.): 300 kg, Exhibition lathe, available from stock. After Trens filed for insolvency, we are putting in extra effort and are now overhauling TOS and later Trens lathes to a high standard. Every machine is completely disassembled down to the last screw. Here is an overview of a complete overhaul process in our facility: 1. Machine cleaning, disassembly of all machine assemblies 2. Grinding: bed, saddle, cross slide, spindle, tailstock quill 3. Grinding and scraping of the compound slide guideways; replacement of the leadscrew with nut and key bar 4. Scraping of the guideways: spindle, saddle, cross slide, and tailstock to geometric positions according to the accuracy protocol 5. Replacement: leadscrew with nut, key bar, and Multifix base body for cross slide (including 2 tool holder cassettes) 6. Complete disassembly and replacement of all necessary spare parts in the apron, gear box, headstock, feed gearbox, tailstock, cross and compound slide 7. Installation or replacement of rack and pinion as needed; repair of leadscrew and feed shaft 8. Complete bearing replacement in all mechanical assemblies 9. Complete replacement of machine nameplates 10. Machine priming, sealing, sanding, polyurethane top coating, and painting of machine accessories – white RAL 9003, anthracite RAL 7016 Nodpev Hzqxsfx Ah Uslb 11. New electrical cabinet with electrical components; replacement of main motor, rapid traverse motor, hydraulic pump, wiring, and LED work area lighting 12. Preparation of the accuracy report and electrical inspection report 13. Inspection and machine acceptance at our premises All overhauled machines are CE-certified and come with a 12-month warranty. CE-compliant version: - Chuck guard with end switch - Front chip guard mounted on the carriage - Rear chip guard - Covers for leadscrew and feed shaft - Emergency stop brings the machine to a complete stop within 2 seconds Special accessories (used): - Three-jaw chuck Ø 190 mm - Four-jaw chuck Ø 190 mm - Three-jaw chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support centre for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 – 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-position tool post

Stanje: novo, Širina plošče: 2000 mm Globina plošče: 1500 mm Višina plošče: 310 mm Teža: 2385 kg Potrebni prostor pribl. 2000 x 1500 x 300 mm Vpenjalne plošče – plošče z T-utori – polje plošč 2000 x 1500 x 310 mm Če niste našli želene dimenzije, nam lahko pošljete e-pošto z izpolnjenim PDF obrazcem. Tako vam lahko izdelamo ploščo po meri. Število utorov: 5 Robni razmak: 135 mm Medosna razdalja utorov: 270 mm Širina utora: 28 mm Kakovost lite železo: HT250 Ravnost manj kot 0,12 mm Površina obdelana po DIN 876/III Nlsdpjy S Dupsfx Ah Ujb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pritisk: 25 t Dolžina krivljenja: 1250 mm Razmak med stojali: 1200 mm Krmljenje: Cybelec CybTouch 12 Hod: 150 mm Vgradna višina: 340 mm Hitrost hitrega spusta: 220 mm/s Hitrost krivljenja: 0-12 mm/s Skupna potrebna moč: 5,5 kW Teža stroja cca: 2.500 kg Mere: 1980 x 1170 x 2185 mm Standardna oprema: Nlodpjyz Sw Rsfx Ah Ujb Osnovna oprema: - CNC krmilnik Cybelec CybTouch 12 - 4 osi: Y1-Y2-X-R - Zadnji prislonski sistem mod. GHP-2 - Glavni motor s servopogonom - Varnostni sistem: DSP AP+MCS - Hidravlični sistem HAWE - CE standard

Stanje: rabljeno, Leto izdelave: 2000, Predelava krmiljenja 2026: CybTouch 15 Windows Tlačna sila: 100 t Dolžina upogibanja: 3100 mm Hod: 215 mm Nlodpfx Aswn Ebvoh Usb Varnostni odmik: 350 mm Prehod med stebri: 3250 mm Stisnjen zrak: maks. 8 bar Hitrost zapiranja: 200 mm/s Hitrost stiskanja: 1–10 mm/s Skupna potrebna moč: 7,5 kW Teža stroja pribl.: 8.000 kg Dimenzije D-Š-V: 3450x2000x2800 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dolžina reza: 2520 mm Debelina pločevine pri 400N/mm²: 4,0 mm Hodov na minuto: 47 Zadnji prislon pribl. 750 mm Nedpfx Ahey Rf T Re Uelb Izpust: 350 mm . Zelo dobro originalno stanje! . Oprema: Stranski prislon na levi, 750 mm Nastavitev rezalne reže Zadnji prislon z noniusom in lupo (ter lučko) Zaščita pred preobremenitvijo . Drugo: obe rezili sta ostra in še nista bila podložena Valji so suhi

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 2.500 h, skupna dolžina: 3.540 mm, skupna širina: 1.500 mm, skupna višina: 2.330 mm, Barva: Siva Teža: 8.230 kg - Leto izdelave: 2001 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 5356 - Delovne ure: 2.500 - Upravljanje: Konvencionalno - Moč [kW]: 11,0 - Število osi [kos]: 3: Y1+Y2+X - Pritisk stiskalnice [ton]: 160 - Maks. delovna širina [mm]: 3.100 - Razdalja med stebri [mm]: 2.500 - Globina zadnjega naslona [mm]: 750 - Maks. hod [mm]: 200 - Bombirni sistem: Brez Nljdpoy Thmxsfx Ah Usb - Nosilec za matric: Standard - Tip nosilca orodja: European-style - Orodja vključena: Da - Transportne mere: 3.540mm x 1.500mm x 2.330mm (d x š x v) - Transportna teža [kg]: 8.230kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Oglasna cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, The press brake was manufactured in 1994. Working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Pressing force: 600 kN Weight: 4000 kg Power: 10 kW Njdpfxop R Ircs Ah Uelb

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 662.404 km, moč: 228 kW (309,99 KM), prva registracija: 09/1999, vrsta goriva: dizel, stanje pnevmatik: 50 odstotek, konfiguracija osi: 6x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: euro2, vzmetenje: zrak, skupna dolžina: 7.500 mm, skupna širina: 2.500 mm, skupna višina: 3.200 mm, Leto izdelave: 1999, Oprema: ABS, električno upravljanje oken, meglenke, zapora diferenciala, = Druge možnosti in dodatna oprema = - 1 rezervoar za gorivo Nedpfey Uuv Aex Ah Ujlb - Zračne blazine - Naslon za roke - Zadnje vzmetenje: zračno - Hidravlika - Hidravlika za kipanje - Odprt strešni del - Blokada - Dnevna kabina - Priklopna gred (PTO) = Dodatne informacije = Profil pnevmatik: 50% Zavore: kolutne zavore Prednja os: krmiljena Zadnja os 1: dvojna kolesa; diferencialna zapora; vzmetenje: zračno Zadnja os 2: dvižna os; krmiljena; vzmetenje: zračno Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: zelo dobro (rabljeno), Hello. I am offering for sale a CNC LATHE DMG GILDEMEISTER CTX 310 V3 with driven tools. TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: Heidenhain Data Pilot 4290 Country of Manufacture: Germany Year of Manufacture: 2003 - Machine operating hours: 9,144 h Machine specifications: - Turret: 12 positions for VDI-30 tool holders + TurnPlus adapter - Max spindle speed: 5,000 rpm - C axis - Driven tools - Hydraulic tailstock - Through spindle - Max turning diameter, X axis: 190 mm - Max turning length, Z axis: 455 mm - Coolant system - Hydraulic 3-jaw chuck SMW AutoBlock - Spindle bore diameter: 50 mm - Chip conveyor - Complete programming manual Nlodpfx Ahjy Rb H Hj Uob - Mechanical and Electrical documentation - Machine weight: 3.8 t - Loading included in the price The machine has undergone a full inspection. Fully operational. Connected and ready to work. Stal-Com has been supplying, servicing, and providing training on DMG CNC machines for 19 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. All our machines undergo meticulous technical inspections. Besides customers from Poland, our machines are purchased by clients from all over Europe and parts of Asia. Each machine can be tested during real production, as we also perform machining operations. After purchasing a machine from us, we provide operator training and can set up part production at the customer's site. We work with many companies on long-term cooperation, supplying subsequent machine tools.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni parni kotel ----- - montiran na okvirju - Proizvajalec: LOOS, Gunzenhausen Tip: UL-S 1250 Zmogljivost: 1.000 kg/h Dovoljeno delovno nadtlak: 13 bar Povečan preizkusni nadtlak: 24,7 bar Polna prostornina vode: pribl. 2.320 l Letnik izdelave: 10 / 2006 CE oznaka: CE 0036 Nodpfx Aexnxfljh Ujlb Opremljen s plinskim/oljnim gorilnikom Weishaupt GL5/1-D/ ZMD, ločeno električno omaro, napajalno črpalko in obstoječimi grobimi in finimi armaturami.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Model: U-HD 1250 Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Operating overpressure: 13 bar Increased test overpressure: 23.4 bar Nodewra Ewepfx Ah Uelb Water content at NW approx.: 993 l Water content full approx.: 1,365 l Year of manufacture: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300–1,750 kW, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.