CNC stružno-rezkalni center 6 AGW

DMG CTX 310 Eco (nur 3.350 h)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, CNC upravljanje: Heidenhain TNC 620 Osi Pomik X-os mm: 500 Pomik Y-os mm: 450 Pomik Z-os mm: 400 C-os indeksiranje stopinj: 360º (0,001º) B-os indeksiranje stopinj: -5º+110º (0,001º) Podajalne hitrosti m/min: 12 Hitropomik m/min: 12 Delovna miza Dimenzije palet mm: ø630×500 Maks. teža obdelovanca kg: 200 Vreteno Isdpfx Aasyzar Ne Ujia Maks. hitrost vrtenja vretena obr/min: 10.000 Moč vretena kW: 9/13 (100% ED/40% ED) Orodni sistem Vpenjanje orodja: SK-40 Število orodij v zalogi: 16 Maks. premer orodja mm: Z prostimi sosednjimi mesti mm: ø130 Z zasedenimi sosednjimi mesti mm: ø80 Maks. dolžina orodja mm: 300 Maks. teža orodja kg: 200 Signalna luč CE-skladnost Hladilna pištola Neposreden merilni sistem XYZ Merilna sonda Ročni upravljalnik Merjenje orodij Obratovalni čas stroja: Ure pod napetostjo: 28.826 Delovni čas vretena: 14.423 Geometrija in vreteno v zelo dobrem stanju.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling Ijdpfx Aow Ephbsa Ujia - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 450 mm, hitrost vretena (min.): 25 obr/min, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 213 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, prehod palice: 65 mm, CNC Siemens 840 D Območje dela Največji premer vrtenja nad posteljo: 505 mm Premer vrtenja nad sani X: 375 mm Premer glave vpenjala: 210 mm Kapaciteta palice: 65 mm Prečni hod (X): 213 mm Vzdolžni hod (Z): 450 mm Pomiki Hitri pomik osi X/Z: 24/30 m/min Glavno vreteno Priključek vretena (ravna prirobnica): 140 h5 mm Notranji premer prednjega ležaja: 100 mm Glavno vreteno Moč motorja vretena (40/100% ED): 16/12 kW Navor (40/100% ED): 153/115 Nm Hitrost vretena: 25 - 6000 vrt/min Revolver za orodja Število orodnih postaj: 12 Od tega motoriziranih: 12 Premer stebla po DIN 69880: 30 mm Moč motorja (40% ED): 9 kW Maks. navor (40% ED): 20 Nm Maks. hitrost: 4500 min-1 Konjiček Hod konjička, avtomatski: 450 mm Vpenjalni konus: CM 4 Maks. pritisk konjička: 400 daN Oprema stroja: • Transporter za odrezke • Priprava za odsesovalec hlapov • 2 aksialna motorizirana modula • 4 radialna motorizirana modula Iiedpfjw Adhwox Aa Uea • Fiksni držala za orodja

Stanje: dober (rabljeno), Leto izdelave: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis travel: 350 mm. Y-axis travel: 250 mm. Z-axis travel: 256 mm. Workpiece length: 750 mm. Iiodpfx Aeu Tq Hwja Uoa Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm x H 2305 mm. Machine weight: approx. 2,600 kg.

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 154 h, potovalna razdalja osi X: 215 mm, pomik osi Y: 100 mm, pomik po osi Z: 605 mm, skupna višina: 1.725 mm, skupna širina: 1.690 mm, skupna masa: 4.650 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: SMOOTH Ez, število osi: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 rpm with a motor power of 15.0 kW. It is equipped with a 12-position turret and rapid traverse rates of 30, 10, and 30 m/min in the X, Y, and Z axes, respectively. Contact us for further information about this machine. Additional equipment • Transformer for Europe (CE marking) • Roller guide with spherical roller bearings • SD card interface + USB storage interface • 1 set of control buttons • Foundation kit (steel plates) • CE certification (with noise filter) • C-axis positioning 0.0001° increment • 12-position turret • Y-axis control • Bar feeder interface Additional information Automatic parts catcher High-pressure coolant system Preparation for chip conveyor Isdsx D R Svjpfx Aa Usia 8" open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic picking cycle with load detection Quick-change tool holder system Bar stock diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and workpiece end: 81 to 686 mm Turret Number of tool stations: 12 Tool size (external turning): 25 mm Tool size (internal turning): 40 mm Tool size (driven drill): 20 mm Tool size (driven end mill): 20 mm Tool size (driven tap): M20 Indexing time per station: 0.23 s Indexing time for full rotation: 0.63 s Tailstock Quill bore (Morse taper): MT No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools: Milling spindle power (continuous): 3.7 kW Milling spindle power (40% duty cycle): 5.5 kW Maximum milling spindle speed: 4,500 rpm Minimum milling spindle speed: 20 rpm Media: Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine depth: 2785 mm

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Z-axis travel 360 mm Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Iodpfxjwzynqo Aa Uoia Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Space requirement approx. 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Iisdpowp D Nbjfx Aa Uea Spare parts package

Stanje: dober (rabljeno), Leto izdelave: 2001,

Leto izdelave: 2008, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The system was used for grinding oil filtration in carbide machining applications. Iijdjlczcwjpfx Aa Uja Cooling unit: Eckert 3 filter towers with sludge bag Filtration capacity: 80-100 l/min Filtration fineness: 3-5 µm The description refers to the system with a sludge drum; technical data are similar. Original user manual available in hard copy. Videos available upon request.