Center stružnica

M-TOS SV 18 R x 1250

Exhibition lathe, available from stock.

After Trens filed for insolvency, we are putting in extra effort and are now overhauling TOS and later Trens lathes to a high standard. Every machine is completely disassembled down to the last screw.
Gjdev Hzqxjpfx Ab Esuh

Here is an overview of a complete overhaul process in our facility:

1. Machine cleaning, disassembly of all machine assemblies
2. Grinding: bed, saddle, cross slide, spindle, tailstock quill
3. Grinding and scraping of the compound slide guideways; replacement of the leadscrew with nut and key bar
4. Scraping of the guideways: spindle, saddle, cross slide, and tailstock to geometric positions according to the accuracy protocol
5. Replacement: leadscrew with nut, key bar, and Multifix base body for cross slide (including 2 tool holder cassettes)
6. Complete disassembly and replacement of all necessary spare parts in the apron, gear box, headstock, feed gearbox, tailstock, cross and compound slide
7. Installation or replacement of rack and pinion as needed; repair of leadscrew and feed shaft
8. Complete bearing replacement in all mechanical assemblies
9. Complete replacement of machine nameplates
10. Machine priming, sealing, sanding, polyurethane top coating, and painting of machine accessories – white RAL 9003, anthracite RAL 7016
11. New electrical cabinet with electrical components; replacement of main motor, rapid traverse motor, hydraulic pump, wiring, and LED work area lighting
12. Preparation of the accuracy report and electrical inspection report
13. Inspection and machine acceptance at our premises

All overhauled machines are CE-certified and come with a 12-month warranty.

CE-compliant version:
- Chuck guard with end switch
- Front chip guard mounted on the carriage
- Rear chip guard
- Covers for leadscrew and feed shaft
- Emergency stop brings the machine to a complete stop within 2 seconds

Special accessories (used):
- Three-jaw chuck Ø 190 mm
- Four-jaw chuck Ø 190 mm
- Three-jaw chuck Ø 240 mm
- Four-jaw faceplate Ø 320 mm
- Support centre for bed slide
- Various chuck jaws (10 pieces)
- Collet set Ø 2 – 25 mm with collet chuck + drawbar
- Special collet set (10 pieces) with collet chuck
- 4-position tool post

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.