Center stružnica

Colchester Triumph VS 2500

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 5.000 h, največja hitrost vretena: 2.500 obr/min, skupna masa: 1.800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional lead-screw and feed shaft arrangement, stepless speed control, and a digital readout. Key specifications include a swing diameter of 400 mm, a center height of 195 mm, and a bed length of 1270 mm. The machine is also equipped with a MultiFix quick-change tool post, a maximum spindle speed of 2,500 rpm, and a motor power of 7.5 kW. The total weight is 1,800 kg. Contact us for more information about this machine. • Control: Conventional with lead screw and stepless speed adjustment • Displays: Digital readout for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Swing diameter: 400 mm Pjdex D Nwdepfx Adyjgg • Center height: 195 mm • Bed length: 1270 mm • Tool post: MultiFix quick-change tool post Additional equipment: • 3x three-jaw chucks • 3 sets of jaw inserts • Collet chuck key • Manual/operator’s handbook • Work area lamp • Digital dial gauge • 4 MultiFix tool holders • Various turning tools • Keyless drill chuck for tailstock • Coolant pump

Stanje: dober (rabljeno), Leto izdelave: 2018, Miza 1473 x 305 mm, pomiki XYZ: 1000 x 410 x 400 mm (kolenski tip), hodi pinole 127 mm, stožec vretena ISO40, avtomatski izvlečni vijak, motor vretena 5 KM, hitrosti vretena 70 - 3600 vrt/min, CNC upravljanje Prototrak SMX, Pgjdoxftqdopfx Adyog

Stanje: zelo dobro (rabljeno), Swing diameter over bed 400 mm Pgedpfx Aeq Dll Djdyeg Centre distance 650 mm Spindle speeds 0–2500 rpm Various accessories MARCELS MACHINES CH

Stanje: novo, Leto izdelave: 2025, Premer struženja nad ležiščem: 0400 mm Premer struženja nad podporo: 246 mm Dolžina struženja: 1250 mm Višina konic: 195 mm Premer vretena: 54 mm Pogonska moč: 7,5 kW - Nova stroj - s 2-osnim digitalnim prikazovalnikom ACU-RITE, vklj. konstantno rezalno hitrost, nameščeno na suportu, hitromenjalno držalo orodja MULTIFIX velikost MB Pgedpfx Adjxcyxcjyog * Za več informacij o natančni serijski opremi in razpoložljivih možnostih obiščite našo spletno stran ali nas neposredno pokličite *

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina brušenja: 1.250 mm, dolžina mize: 1.250 mm, obremenitev mize: 1.200 kg, širina mize: 500 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 9.300 kg, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, moč: 185 kW (251,53 KM), vhodna napetost: 400 V, potrebna višina: 2.870 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X-axis: Grinding length 1,250 mm, travel 1,400 mm Y-axis: Distance table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel distance and the grinding wheel width. Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Pgedeu Hiq Rspfx Adysg Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LVT50 GMRJA/04069, SPECIFIKACIJE STROJA Višina med središčema: 195 mm Premer obdelovanca nad posteljo: 400 mm Premer obdelovanca nad prečnim sanežem: 246 mm Premer obdelovanca v izrezu: 585 mm Širina pred čelno ploščo: 165 mm Dolžina med središčema: 1250 mm Hitrosti vretena (brezstopenjsko nastavljivo): 0-2500 rpm Priklop vretena: (Camlock) D1-6 Premer izvrtine vretena: 54 mm Moč vretenskega motorja: 7,5 kW Pgjdoxldidopfx Adyeg Širina postelje: 318 mm Premik prečnega saneža: 250 mm Premik zgornjega saneža: 130 mm Premik tulec konjička: 178 mm Konus v tulcu konjička: št. 5 MT Pribl. teža: 1800 kg Stroj v metrični izvedbi STROJ OPREMLJEN Z: Digitalni odčitni sistem Newall z 2 osmi Tričeljustna glava Hitromenjalni nosilec orodja Ainjest visokohitrostni dodatek za rezanje navojev Zaščitni pokrov glave Osvetlitev Hladilni sistem Zadnji zaščitni pokrov

Stanje: rabljeno, Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Pgsdpfx Adjxn Ty Rjyjg Speed range: 9 - 1800 rpm Number of speeds: 24 Longitudinal feed: 0.092 - mm/rev Cross feed: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers, max.: 00 kg Workpiece weight, max. (unsupported): 750 kg Röhm 3-jaw chuck, Ø ... Machine dimensions approx.: 4600 x 1900 x 1600 mm Weight approx.: 4300 kg Number of feed and thread pitches: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout - Mobile chip guard along the entire length (plexiglass) - Coolant system - Rapid traverse in Z and X axes - Multifix toolholder, size C, with 6 interchangeable cartridges - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (cone center) MK 6 Bed guideways in very good condition!

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Psdpfxow Dvkaj Adyegg - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Center height 180 mm Center distance 1000 mm Max. swing diameter over bed 356 mm Max. swing diameter without bed bridge 506 mm Max. turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle nose D1-4/DIN55029 Spindle bore D38 mm Threads that can be cut: Metric, Whitworth, Module, Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock quill stroke 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw 160 mm chuck - 4-jaw 200 mm chuck - Face plate D320 mm - 3-axis digital readout system - Electromechanical spindle brake - Fixed and travelling steady rests - Fixed center - Coolant system - Halogen work lamp - Splash guard - Chuck guard - Tool post guard - Tailstock - Manuals Pedpexbz Ebjfx Adysgg Factory new model with 0 operating hours. Powered. Showroom machine.

Stanje: novo, Leto izdelave: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with variable spindle speed. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. Typically used in small industrial workshops, repair shops, garages, etc. This machine version is supplied without a base. The universal TYTAN 750 PRO lathe, thanks to its infinitely variable spindle speed adjustment, is an ergonomic machine that meets user demands. Reduced setup time when processing parts of different sizes translates into improved efficiency and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via DC motor and voltage regulator. This ensures optimal rotational accuracy of the lathe chuck, resulting in high-quality machining of workpieces. Key advantages: - Modern DC motor with infinitely variable spindle speed ensures convenience and reduces calibration times. - LCD screen with spindle speed display allows control and quick adjustment of spindle speed during setting of cutting and threading modes. Pgsdpsvvlxlsfx Adysg - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels, and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2-3.5 mm); imperial – 21 pitches (8-56 TPI). Left- and right-handed thread cutting available. - Automatic longitudinal feed with 6 speed settings (0.07 to 0.40 mm/rev) – significantly reduces processing time without compromising machining quality, especially for long parts. - Fully compliant with EU (CE) directives as well as Polish and DIN standards. Technical specifications: - 3-jaw chuck: 125 mm - Max turning diameter over bed: 250 mm - Turning diameter over cross slide: 150 mm - Turning length between centers: 750 mm - Max workpiece length (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Max tool size: 12 x 12 mm - Compound rest travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed regulation: stepless (L/H) - Spindle speeds: L: 50–1125 rpm / H: 100–2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 TPI - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg