Griggio Štiristranski Skobelni Stroj Griggio G18/4 Quadro nakup rabljenega (79.267)

Stanje: rabljeno, Tehnični podatki: Največja širina skobljanja: 180 mm Največja višina skobljanja: 120 mm Premer vreten: 35 mm Število vreten: 4 Zaporedje vreten: spodaj/desno/levo/zgoraj Moč motorja za vertikalna vretena: 5,5 kW Moč motorja za horizontalna vretena: 7,5 kW Moč motorja podajalnika: 1,5 kW Število zgornjih jeklenih pogonskih valjev: 4 Število zgornjih gumiranih pogonskih valjev: 1 Premer odsesovalnega priključka: 120/200 mm Podajanje na kardanskih gredi Črpalka za mazanje delovne mize Tlak: 6 atm. Električni dvig ohišja Kedpfx Agjzguvdo Todr Napajanje: 400 V Skupne mere: Dolžina: 3020 mm Širina: 1050 mm Višina: 1630 mm

Stanje: rabljeno, Tehnični podatki: Maksimalna širina skobljanja: 120 mm Kjdszgut Nepfx Ag Tsdr Maksimalna višina skobljanja: 70 mm Premer vretena: 30 mm Število vreten: 8 Zaporedje vreten: spodaj, desno, levo, zgoraj, spodaj, zgoraj, desno, levo Premer odsesovalnega priključka: 6x120 mm Stopenjska regulacija podajanja: 4-24 m/min Podajanje preko kardanske gredi Napajanje: 400 V Skupna moč: 17 kW Skupne dimenzije: Dolžina: 3050 mm Širina: 1200 mm Višina: 1200 mm

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike Kdjdpfev Tpxqjx Ag Ter - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Leto izdelave: 2026, stanje: novo, značilnosti: Zaprta varnostna kapuca za zmanjšanje hrupa in preprečevanje pršenja ostružkov Sprejema neprekinljivo spremenljivo hitrost pomika, hitrost pomika preko inverterja: 6–30 m/min Vsako vreteno poganja neodvisen motor z močno reznico Prilagojeno za težko delo z rezanjem, saj je opremljeno z dvema paroma visokopreciznih ležajev na obeh koncih vretena Centralno nastavljanje vretena na sprednji plošči omogoča enostavno delo Površina delovne mize je trajno zaščitena s trdo kromirano elektro-prevleko Opremljeno s kratkim podajalnim mehanizmom za gladek podajalni tok Spodnji pogonski valj za izboljšano podajanje Pnevmatsko podajanje z valjem se lahko nastavlja posebej, primerno za materiale različne debeline Ročna oljna črpalka za mazanje delovnih miz in drsnikov, omogoča centralizirano upravljanje Predrezalni rezkar na prvem spodnjem vretenu in zobata delovna miza učinkovito zmanjšujeta raven hrupa in zagotavljata natančno linijskost Odstranljiva delovna miza vertikalnega vretena je zasnovana tako, da učinkovito ščiti navojni drog pred onesnaženjem Posebna toplotna obdelava HRC 58 na delovni mizi ob prvem spodnjem vretenu povečuje trajnost in življenjsko dobo delovne površine Uporaba električnih komponent mednarodnega razreda z zanesljivo kakovostjo TEHNIČNE SPECIFIKACIJE: Ksdsgp Dcqepfx Ag Tedr Delovna širina (min): 20 mm Delovna širina (max): 240 mm Delovna debelina (min): 8 mm Delovna debelina (max): 180 mm Število vreten: 5 kos Hitrost vretena: 6000 r/min Premer vretena: 40 mm NAMEŠČENI REZALNI BLOKI (od prvega do zadnjega): prvo spodnje vreteno: premer 108–145 mm desno vreteno: premer 108–200 mm levo vreteno: premer 108–200 mm prvo zgornje vreteno: premer 108–200 mm drugo spodnje vreteno: premer 108–200 mm MOČ MOTORJEV: prvo spodnje vreteno: 5,5 kW (7,5 HP) desno vreteno: 5,5 kW (7,5 HP) levo vreteno: 7,5 kW (10 HP) prvo zgornje vreteno: 7,5 kW (10 HP) drugo spodnje vreteno: 7,5 kW (10 HP)

Stanje: rabljeno, Tehnični podatki: Največja širina skobljanja: 240 mm Največja višina skobljanja: 130 mm Premer vretena: 40 mm Število vreten: 5 Zaporedje vreten: spodaj, desno, levo, zgoraj, univerzalno Število zgornjih kovinskih pogonskih valjev: 4 Število zgornjih gumiranih pogonskih valjev: 3 Premer odsesovalnega priključka: 5x120 mm Regulacija pomika: Pomik prek kardanske gredi Črpalka za mazanje delovne mize Napajanje: 400 V Ksdpfjzd Elwjx Ag Tedr Skupna moč: 24 kW Skupne dimenzije: Dolžina: 3800 mm Širina: 1600 mm Višina: 1600 mm

Stanje: rabljeno, Tehnični podatki: Maksimalna širina skobljanja: 230 mm Maksimalna višina skobljanja: 130 mm Premer vreten: 40 mm Število vreten: 4 Zaporedje vreten: spodaj, desno, levo, zgoraj Število zgornjih jeklenih pogonskih valjev: 3 Število zgornjih gumijastih pogonskih valjev: 1 Premer odsesovalnega priključka: 4 x 120 mm Dve hitrosti podajanja Podajanje z univerzalnim kardanskim gredom Mazalna črpalka za delovno mizo 1 gladek valj v mizi Tlak: 6 atm. Ročno dvigovanje ohišja Napajanje: 400 V Skupna moč: 16,5 kW Kdodpszd A Rwofx Ag Tor Skupne dimenzije: Dolžina: 3700 mm Širina: 1500 mm Višina: 1700 mm

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B4R87655, vhodna napetost: 230 V, potovalna razdalja osi X: 450 mm, pomik osi Y: 360 mm, skupna masa: 720 kg, skupna dolžina: 2.330 mm, skupna širina: 1.360 mm, skupna višina: 1.700 mm, nazivna (navidezna) moč: 1 kVA, največja hitrost vrtenja: 1.000 obr/min, vrtljajska hitrost (min.): 100 obr/min, Brother BE-1204B-BC Töökindel 4-pealine tööstuslik tikkimismasin Kirjeldus Müügil on professionaalne Brother BE-1204B-BC tööstuslik mitmepealine tikkimismasin, mis on komplekteeritud täisväärtusliku tootmistööjaamana. See on kvaliteetne Brotheri tööstusliku klassi tikkimissüsteem, millel on 4 tikkimispead ja igaühes 12 nõela – kokku kuni 48 niidi-/nõelapositsiooni, võimaldades üheaegselt tikkida neljale detailile või rõivale. Masin on mõeldud kõrgete kvaliteedinõuetega, suure läbilaskevõime ja usaldusväärse töövõimega professionaalseks tikkimistootmiseks: logod, vormiriided, reklaamrõivad, tööriided, ettevõtete tekstiilid ja alltöövõtuna tikkimine. Seadme kasutus on olnud professionaalses rõivatööstuses ning seda on hoitud siseruumides. Põhifunktsioonid • Brother tööstuslik 4-pealine tikkimissüsteem • 12 nõela iga pea kohta • Kokku 48 nõela-/niidi positsiooni • Sünkroonne tikkimine neljal tootel • Sobib mitmevärviliste logode ja tekstiilide tikkimiseks • Vastupidav silla-tüüpi tööstusraam • Iga niidi individuaalne pingutusreguleerimine • Elektrooniline juhtpaneel • Niidikoonuste hoidja kuulub komplekti • Tikkimisraamid komplektis (nagu piltidel) • Integreeritud alumise niidi poolimisseade • Mõeldud järjepidevaks professionaalseks tootmistööks Tehnilised andmed • Tootja: Brother Industries, Ltd. • Mudel: BE-1204B-BC • Seerianumber: B4A87655 • Tüüp: Tööstuslik mitmepealine tikkimismasin • Peade arv: 4 • Nõelu arv: 12 nõela pea kohta • Kokku nõelapositsioone: 48 • Konfiguratsioon: sillatüüpi mitmepealine süsteem • Juhtimissüsteem: Brotheri elektrooniline juhtseade • Komplekteeritus: Täielik laualt juhitav tööjaam niidiraamiga Seisukord • Kasutatud tööstusmasin • Testitud ja töökorras • Kasutatud professionaalses tootmiskeskkonnas • Hoiustatud alati siseruumides • Tavalised kasutusjäljed tehasekeskkonnast • Müüakse olemasoleval kujul, ilma garantiita Tüüpilised kasutusalad • Töörõivaste tikkimine • Vormirõivaste tootmine • Ettevõtete logod • Reklaamtekstiilid • Alltöövõtuna tikkimistöö • Väikesed ja keskmised tikkimistöökojad • Mitmevärviline rõivatikand Komplektis • Brother BE-1204B-BC tikkimismasin • 4 tikkimispead • Niidikoonuse alus Kdsdpfey Ndudex Ag Tor • Tööstuslik töölaud/silla raam • Juhtpaneel • Poolimisseade (alumise niidi kerimiseks) • Tikkimisraamid piltidel Asukoht Valga, Eesti Lahkivõtmine ja transport Lahtimonteerimise, laadimise ja transpordi eest vastutab ostja. Soovitatav on kaasaegne professionaalne lahtimonteerimine ja hoolikas transpordi planeerimine.

Stanje: rabljeno, Leto izdelave: 2000, Pregled Ta polnilni monoblok je bil izdelan leta 2000 pri nemškem podjetju MAG Schymanski. Stroj je namenjen vročemu polnjenju sokov in brezalkoholnih napitkov. Naprava je opremljena z 28 polnilnimi ventili in 4 zapiralnimi glavami. Stroj je že demontiran in skladiščen. Ksdpfx Agjzd S Ixe Tsdr Tehnični podatki - Zmogljivost: cca 3.500 – 6.000 steklenic/uro - Formati: 0,5 l / 0,7 l / 1,0 l / 1,5 l - Uporaba: vroče polnjenje sokov in brezalkoholnih napitkov - Konfiguracija: 28 polnilnih ventilov / 4 zapiralne glave

Stanje: kot nova (razstavni stroj), Ex-demo machine – 4-function combination unit – Robland HX310Pro Kjdpfxjvrvpms Ag Todr 4-function combination machine Robland HX310Pro, 3 motors, 2 selectable spindle speeds, 3-knife planer shaft, 1300 mm sliding table, in absolutely as-new condition.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), širina mize: 1.300 mm, dolžina mize: 2.500 mm, skupna masa: 790 kg, število osi: 3, Oprema: CE označba, dokumentacija / priročnik, This is a CNC milling machine equipped with 4 spindles that can operate simultaneously and perform automatic tool changes. This increases production efficiency and makes the process up to four times faster. This CNC milling machine is ideal for large-scale production of façades, doors, windows, skirting boards, and more. Kjdpfxer D Ntfo Ag Todr Thanks to the planetary gearbox of the Wattsan M1 1325, you can effortlessly mill hardwoods and soft metals. Additionally, a vacuum table can be installed to ensure rock-solid workpiece fixation. With a Wattsan milling machine, you can process metal, hardwood, plastic, foam, aluminium, and plexiglass. Contact our sales managers for more details! Technical specifications of the Wattsan M1 1325 S4: Working area: 1300 x 2500 mm Spindle power: 6 kW Machine dimensions: 2000 x 3040 x 1780 mm Machine weight: 1000 kg Virmer not only provides first-class machinery but also offers service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. Additionally, all Wattsan equipment owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. In addition to laser engravers, we supply metal cutters, welding machines, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously develops its products with the help of customer feedback. As a result, Wattsan has implemented more than 50 updates, making the machines more reliable, precise, and efficient—helping you take your business to the next level. PLEASE FEEL FREE TO CALL OR WRITE TO US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK. If you are looking for the right laser or CNC milling machine, we are happy to assist. Discover our wide range of machines and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fibre metal lasers; fibre metal laser engraving machines; CNC milling machines for metal; woodworking milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutting machines; metal laser cutting systems; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; air compressors; rotary devices; mirrors for laser machines.

Stanje: skoraj kot novo (rabljeno), Maximum planing width: 220 mm Maximum planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom 4 kW Kjdpfstqwkxox Ag Tjdr right 3 kW left 3 kW top 4 kW Lubrication pump for the worktable Electric lifting of machine body Power supply: 400 V

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, premer zgornjega valja: 130 mm, premer stranskega valja: 110 mm, delovna širina: 1.030 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, moč: 2,2 kW (2,99 KM), število digitalnih zaslonov: 3, Oprema: nožno daljinsko upravljanje, nujno zaustavitev, 4-valjna obodna krivilka Proizvajalec Sahinler, tip 4RM 10-130 HRC Leto izdelave: 2008 Tehnični podatki Proizvajalec: Sahinler Tip: 4RM 10-130 HRC Leto izdelave: 2008 Uporabna dolžina: 1030 mm Premer zgornjega valja: 130 mm Premer stranskih valjev: 110 mm Ksdszcpu Ujpfx Ag Todr Debelina pločevine brez predkrivljenja: 6 mm Debelina pločevine s predkrivljenjem: 5 mm Skupna moč: 2,2 kW Dimenzije: 2,4 x 1 x 1 m Teža: ca. 1,5 t Oprema • Kaljeni valji • Digitalni prikazovalnik položaja valjev Vsi podatki so brez garancije.

Stanje: rabljeno, Demonstration machine Standard equipment: - Sturdy machine frame - Long feed table - Optimal price/performance ratio Kdodpfxovrvvte Ag Tsr - Soundproof hood - Digital display for width and height adjustment Technical Data: - Planing width (finished size) min./max.: 18 – 180 mm - Planing height (finished size) min./max.: 7 – 120 mm - Min. workpiece length (single piece): 430 mm With group feed: 250 mm - Number of working spindles: 4 - Tool diameter of 1st spindle: 120 mm - Tool diameter of spindles 2, 3, 4 min./max.: 100 mm / 180 mm - Feed table length: 1700 mm - Max. cutting depth: 10 mm - Cutter block speed: 6000 rpm - Spindle diameter: 40 mm - Planer head diameter: 120 mm - Jointing cutter diameter min./max.: 120 / 137 mm - Clamping length vertical spindles: 130 mm - Clamping length horizontal spindles: 190 mm - Feed speeds: 6/12 m/min - Feed roller diameter: 120 mm - Feed motor power: 0.8 / 1.1 kW - Horizontal spindle motor power: 5.5 kW + 5.5 kW - Vertical spindle motor power: 7.5 kW - Total output at 100% duty cycle: 20 kW - Extraction port diameter: 120 mm - Minimum extraction air speed: 20 m/s - Minimum extraction air volume: 3200 m³/h - Approx. weight: 1300 kg - Dimensions L x W x H: 2950 x 1180 x 1510 mm Subject to price changes. Errors, misprints, and typesetting mistakes excepted.

Stanje: dober (rabljeno), working width 230 mm working height 120 mm spindle diameter 40 mm 4 heads + glazing bead cutting unit control via ATS panel two-axis head adjustment electric adjustment of the pressure beam variable feed speed adjustment Kjdovtt Ayopfx Ag Tedr The machine operated in-line with other machines.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Kjdpfoypbquox Ag Tsdr Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Kodpfoypbqnjx Ag Tsdr Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Kedpfoypbqhox Ag Tsdr Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Kdjdpsypbqbjfx Ag Tjr Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations Kdsdpfxoypbp Rs Ag Ter OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg Kodpsypbp Defx Ag Tedr 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Leto izdelave: 2026, stanje: novo, The pointing machine was primarily developed for small and medium batch sizes with manual feeding, featuring the following technical specifications: Sometimes, solutions can be quite simple: the mechanical pointing machine was specifically designed for fast and convenient feeding with manual loading. The hydraulic pump can be driven either by a powerful 7.5 kW electric motor or via a connection for a PTO shaft. This makes the machine ideal for producing small to medium quantities of fence elements, wooden posts, and palisades. It is perfect for flexible landscaping needs or urgently planned timber construction. The machine can process all types of milled and peeled timber, including even curved small-diameter logs or barked tree trunks, thanks to its sharp blades. Maximum wood diameter: 270 mm Shortest wood length: 1.15 m 5 selectable pointing angles Suitable for milled, peeled, and unprocessed wood Capacity: 150 to 250 posts per hour Cylinder force: 2 x 10 tons Kodjfw A D Njpfx Ag Tsdr Oil pressure: 200 bar Drive options: - Electric drive: 7.5 kW - PTO shaft - Tractor oil pump

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 410 mm, širina skobljanja: 410 mm, Poravnalka, skobeljni stroj SCM F410 Specifikacija: • stanje – rabljeno, po servisu • proizvajalec – SCM • model – F410 • delovna širina – 410 mm • dolžina miz – 2610 mm • paralelni naslon nastavljiv pod kotom • moč motorja – 4,0 kW • število vrtljajev vretena – 5000 vrt/min • prikazovalnik debeline oblanca • maksimalna debelina odvzema – 8 mm • blažilne grebene pri gredi • zavoro na motorju • 4-nožni valj s premerom 120 mm za klasična rezila • zagon – zvezda-trikot Kdodpfx Aox E Srveg Ter • izhod za odsesavanje žagovine – fi 150 mm • teža – približno 650 kg • oznake CE • dimenzije 261 x 90 x 110 cm (d x š x v) Dodatne informacije: • zelo dobro tehnično stanje • priložene fotografije prikazujejo dejansko stanje predmeta prodaje • možnost vklopa in preverjanja stroja na kraju.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prenovljeni štiristranski skobeljni stroj znamke SCM GROUP. Enostavna in robustna konstrukcija zagotavlja dolgo življenjsko dobo in zmogljivost stroja. Tog jeklen podstavek stroja zagotavlja natančnost in kakovost obdelave. Ksdpfevxtzajx Ag Tsdr Stroj je namenjen večjim obratom za izdelavo profiliranih in ravnih profilov. 5 delovnih vreten: spodnje, desno, levo, zgornje, spodnje Avtomatsko centralno mazanje delovne mize Variator hitrosti pomika materiala Preverjen stroj s polletno garancijo Odlično tehnično stanje Opremljen z orodjem Tehnični podatki Delovna širina (debelina dokončanega profila) min/max 25 / 230 mm Delovna višina (debelina dokončanega profila) min/max 6 / 120 mm Dolžina mize 2000 mm 1. vreteno spodaj cca 5 kW Desno in levo vreteno cca 7 kW 4. vreteno zgoraj cca 7 kW 5. vreteno spodaj cca 5 kW Število obratov orodij 6000 obr/min Nastavljiva hitrost podajanja 4 – 24 m/min Motor za podajanje materiala 4 kW Teža cca 3000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Four-Side Planer REX HOMS-310-K Kdjdpfswfqh Asx Ag Tjr Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW Not used since 2021. The machine has been stored in an enclosed production facility throughout and remains fully operational. After purchase, the electrical wiring was replaced with new components. We assess the technical condition as very good – there are visible signs of use, but everything works correctly from a technical standpoint. The reason for sale is the termination of laminated timber production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height (2 sides): 310 mm Maximum workpiece height (4 sides): 160 mm Minimum workpiece height: 17 mm Driven top and bottom feed rollers

Stanje: rabljeno, Leto izdelave: 2020, Pregled Ta etiketirni stroj je bil izdelan leta 2020 pri proizvajalcu Gernep. Stroj je zasnovan za etiketiranje v industriji sokov. Trenutno je še vedno nameščen in v obratovanju, možen je ogled po dogovoru. Tehnični podatki - Zmogljivost: 10.000 steklenic na uro - Uporaba: sokovi - Konfiguracija: Gernep Labetta 4/3/10 640 2A - Tehnologija etiketiranja: hladno lepilo / Rollina - Etiketirne postaje: 2 × agregata za hladno lepilo - Oblike steklenic - Tip embalaže: steklene steklenice (sadni sok) - Tipične velikosti: - 1,0 l VDF (V=307 mm, Ø90 mm) - 0,5 l NRW (V=260 mm, Ø68 mm) - Posebna primernost: - Primerno za uporabo pri vročem polnjenju - Podatki o etiketah - 1. hladnolepilna postaja: - Dolžina etiket: pribl. 25 – 140 mm - Višina etikete: maks. 150 mm - Spodnji rob: maks. 15 mm - Zgornji rob: maks. 320 mm Kdedpfxjzazkve Ag Tsr - 2. hladnolepilna postaja (z vključeno funkcijo ovijanja): - Dolžina etiket: pribl. 25 – 140 mm - Do 170° ovijanje okoli obsega steklenice - Višina etikete: maks. 150 mm - Spodnji rob: maks. 15 mm - Zgornji rob: maks. 220 mm - Uporabe: - Glavna (telesna) etiketa - Sprednja (prsna) etiketa - Zadnja etiketa