4 -stranski kazalni stroj

VKM

Stanje: novo, Leto izdelave: 2025, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured to drawing for a wide variety of woodworking machines. Certain parts are available from stock. Below you will find a selection of parts that are particularly in high demand: Isdpfxowagxmj Akyetk Centering rollers, bore 40mm: €112.00/piece Centering rollers, bore 50mm: €156.00/piece Feed roller, bore 40mm: €118.00/piece Feed roller, bore 50mm: €138.00/piece Take-off roller, bore 40mm: €102.00/piece Feed roller, bore 50mm: €126.00/piece Bezner WP35 peeling disc: €3,920.00/piece Oswald RM162 guide carriage RM7072W: €302.00/piece Oswald RM162 knife holder RM7066W: €215.00/piece We are pleased to provide a quotation including commercial terms. Further spare parts available upon request.

Leto izdelave: 2022, obratovalne ure: 400 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of Manufacture: 2022 Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 spacing: 36 mm Screen deck 2 spacing: 24 mm - Pre-screen deck with long hopper and variably adjustable dosing roller - Volume measurement via loading - Preparation for air separator - Compressor - LED lighting package - Remote control for all key settings via radio - Diesel-electric drive 80 kW - Axle leveling system - Twin axle, approved for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Itodpfxert Uvzj Akyjk Compost, green waste, biomass, root wood, waste wood, general waste, RDF, various recycling materials (not suitable for construction debris or excavated material) Miscellaneous: Very good used condition, fully operational

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Centering roller, 50 mm bore €156.00/each Iodpfx Aog Rn Avekystk Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 slide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry.

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. Itodpfx Ajg Rxhgskyok The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 20.000 l, Diesel fuel station – Home fuel station – Tank system – Small fuel station consisting of: 1 x 20,000 L storage tank – brand new 1 x eco 75 fuel dispenser – brand new Description of steel tank: 20,000 liter capacity, compliant with EN 12285-2 Class B (replacing DIN 6616), aboveground, double-walled, including test certificate. Approved for installation in seismic zone 0 areas. The tank features two saddle feet, a manhole with dome cover, and is equipped with the following fittings: - 1 fill pipe with TW closure (fill cap) and dip tube - 1 gauging pipe with dipstick and dipstick cap - 1 vent pipe with vent cap - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak fluid The tank is externally sand-blasted, primed, and painted in RAL 7011 iron grey. Iodpfoi Artlsx Akyjtk (Other RAL colours available for an additional charge.) Dimensions: L ≈ 6.90 m + 0.70 m (console) | D = 2.00 m | Weight ≈ 4.2 tonnes | Ex works, loaded free of charge Description of dispenser: type eco 75 – not suitable for calibration, Delivery rate up to approx. 75 l/min, suitable for diesel fuel, includes: - Automated fuel management terminal with myTecalemit-Cloud connectivity - Web-based tank data management software – basic module - 2 ID systems (driver/vehicle) for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230V - Oval gear meter with pulse output, accuracy ≈ +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m delivery hose DN 25 with type-approved automatic dispensing nozzle, incl. swivel joint and hose holder - Nominal suction height: approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing - Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Tank data memory for up to 10,000 delivery records - Menu navigation in German, English, and French Magnetic keys / transponders are additionally required: General: The quoted price for the fuel station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at a competitive additional cost.) You will receive an invoice including VAT. Purchase is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! In addition, we purchase existing tank systems and can professionally empty, clean, dismantle, and remove them as per certified specialist qualifications according to the German Water Resources Act (§ 62 WHG).

Stanje: novo, Leto izdelave: 2026, hitrost pomika os X: 30 m/min, • Machine-related possible wood diameter range: 40 to 200 mm • Feed speed up to 30 m/min • 3 infeed rollers for log centering • 2 outfeed rollers • 1 saw blade • Cutting saw motor: 7.5 kW Ijdpfx Aowzwifjkystk • Feed motor: 1.5 kW

Stanje: novo, Leto izdelave: 2026, Simply outstanding – and virtually automatic The automatic pointing machine from VKM The innovative strength of the automatic pointing machine makes it possible: this machine combines the pointing, chamfering, and cutting-to-length processes into just a few efficient steps, all within a single cycle time. An ingenious system is at work here, enabling all production stages to be carried out with maximum precision and speed. It’s the perfect solution for all round timber that has already been milled and/or peeled, and is awaiting its final shape as posts, stakes, or palisades. Efficiency The round timber pointing machine is available as a single-length or double-length model. Itodpehm S Ruefx Akysk Both models enable three process steps—cutting, pointing, and chamfering—to be performed fully automatically in parallel. Without interrupting the production flow: for example, the single-length machine can produce up to 4,000 wooden posts or more per shift. The powerful geared motors utilise frequency inverters to achieve top performance—ensuring maximum speed for cutting and optimized cycle times. This is especially beneficial when processing different diameters: the processing speed can be easily adjusted to suit the round timber.

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A coolable (insulated) milk tank by Fabdec is available. Capacity: 10,000 liters, length: approx. 3,000 mm, diameter: approx. 2,200 mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A refrigeration unit is not included. Ijdpfx Akst Hxdloyotk

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, VKM - Odkorjevalni stroj PS2000 Premer lesa: 40–200 mm Premer odkorjevalnega diska: 458 mm Število odkorjevalnih nožev: 8 Hitrost podajanja: 5–15 m/min Poraba zraka: cca 60 NL/min Število vrtljajev odkorjevalnega diska: 1500 vrt/min Pogonska moč odkorjevalnega diska: 15 kW Pogonska moč spodnjega pogonskega kolesa: 0,37 kW Pogonska moč zgornjega pogonskega kolesa: 0,37 kW Električna nastavitev premera surovega lesa prek nožnega stikala, tudi med delovanjem. Itsdpfx Aov Uxm Tokysk

Stanje: novo, Leto izdelave: 2026, Palisades, posts, or round timber – always a perfect fit. The VKM dowel milling machine, designed in line with proven design concepts. Innovation doesn’t stop with round rod milling machines. Our machines for cylindrical milling of logs feature a range of new developments. Thanks to their modular construction, businesses can precisely select the machine size and configuration tailored to their specific woodworking requirements. Accurate round timber processing for every log. Technology: Itodpfxjfw Ay Ne Akysk All roller pairs are actuated for opening and closing via a valve manifold – eliminating the need for mechanical diameter adjustment. This removes the unnecessary fine-tuning during setup changes. Even if a raw timber log is slightly larger than usual – that’s no longer an issue. With the use of a soft starter, the milling motors are gently ramped up before reaching full power. Alternatively – and especially for challenging power networks – a frequency inverter can also be offered for ramping up operations. Covering a machining range from 30 to 400mm across the entire product line, these milling machines accommodate even the most specific requirements. Efficiency: You control speed and productivity: firstly through your choice between a single-head or double-head milling machine model. For the perfect surface finish, VKM uses milling heads with higher rotational speeds. All components have been modeled with finite element calculations, reducing the number of parts – and thereby potential failure points. The high rotational speeds of the milling heads not only ensure excellent surface quality, but also guarantee high cutting speeds. Depending on the machine type, feed rates of up to 35 m/min are possible. The benefits? Higher speed, greater precision, more power. Safety: Simple machine operation via the central control panel. Pressure regulators for each roller section are mounted directly adjacent to it. Feed speed can also be reduced at any time as needed. All access doors are equipped with electric interlocks and can only be opened once the machine has safely come to a stop. This ensures maximum safety while maintaining top performance during operation.

Leto izdelave: 2026, stanje: novo, Blago je načeloma projektno blago oziroma glede na razpoložljivost na voljo kot razstavni stroj. Uporaba: Doziranje prosto tekočih izdelkov v natančne količine. Lastnosti tehtnice - Enostavno upravljanje - Hitro in enostavno čiščenje - Nizki stroški vzdrževanja - Orodju neprijazna (de)montaža vseh formatnih delov v stiku z izdelkom - Nizki stroški vzdrževanja - Izvedba iz nerjavečega jekla (1.4301) - Krmilnik popolnoma integriran v ohišje stroja - Nastavljiv vibracijski sistem za optimalen potek proizvodnje - Visoka natančnost zaradi kombinacije Itsdpfeq T R Sbox Akysk Tehnični podatki - Število tehtalnih glav: 10 - Prostornina tehtalnega lijaka: 2,5 l - Tehtalno območje: 10 – 1000 g / 2.500 g - Natančnost: ±0,2–1,5 g - Hitrost: 60 vrečk/min (odvisno od izdelka) - Upravljalna plošča: 7" zaslon na dotik - Moč: 1 kW / 230 V / 50 Hz - Dimenzije (D x Š x V): 1620 mm x 1100 mm x 1110 mm - Teža stroja: 380 kg