Fliegl Dhks 390 - 31 M³ nakup rabljenega (75.849)

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear Rsdpfx Agei Ri Rvotot 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 1acf251a278ec5cde4067a7b1, lastna masa: 5.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Semi-trailer, fleet use Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Outer frame with slightly sloped design, new version with load-lock profile for attaching tension straps 24 t two-speed landing gear, single-side operation, straight base, without compensating slide Free support foot dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Quarter shell mudguards in front of and behind each axle 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620/height=360/depth=440 mm, lockable with a padlock (padlock not included) Axles & suspension Drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system Two-line compressed air braking system, colour-coded line routing for easy service Spring-loaded parking brake Duomatic connection at the front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise/lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, make as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable Flooring Anti-slip phenolic plywood, approx. 30 mm thick, for high point loading, suitable for forklift axle loads up to max. 5,600 kg Front wall / corner stanchions 25 mm aluminium hollow section, approx. 1,350 mm high, steel corner stanchions in volume version Country of registration / Plates Redpfekv Uvzox Agtet Germany with Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Front wall aluminium Attention! Archive photos shown!

Stanje: novo, številka stroja/vozila: 65c7289da24c6dbb3dde7c971, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 265/70 r19,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of guide rollers removable, front and rear 4 container locks with robust outriggers, 20-foot spacing for swap bodies 7.15 and 7.45 1 pair of gearbox support legs at the front, with straight base sections; left and right legs operate separately Wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Half-shell mudguards Towing equipment for central axle trailer Drawbar with certified 50 mm towing eye, freight forwarder specification (not suitable for trucks with tail lift; exact feasibility to be checked if ordered) Drawbar without length adjustment Axles & Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system; color-coded lines for easy servicing Spring-loaded parking brake Rsdpfei Rixcjx Agtjt Duomatic connector at the front, with connecting line to towing vehicle, FR-right connection EBS, Electronic Braking System with front EBS connector, supplied with connecting cable, FR-right connection Note: This trailer may only be towed by vehicles that ensure ABS functionality! With raise & lower valve Wheels and tyres 265/70 R19.5, manufacturer at manufacturer's discretion Steel twin rims, factory silver Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white marker lights at the front 2 white/red lane position lights at the rear 1 x 15-pin plug at the front, with connecting cable, FR-right connection Additional LED work light at the rear, switched via reverse light LED work light, front centre between supports, facing rearward, controlled by reverse light Operating notes Stated gross weight is technically feasible; due to the nature of the cargo, the maximum gross weight may not be achieved given the permissible axle, nose and saddle loads. (Poor tracking and handling may occur due to improper load distribution.) Registration country/plates Germany With Dekra inspection and certification (in accordance with §13 EG - FGV) 24/7 service hotline Prepared for single-line licence plate holder Warning panel according to ECE 70 Contour marking with reflective tape according to ECE R 048, white on sides and red at the rear Paintwork Frame DB 7350 Nova Grey 10-year anti-corrosion warranty Note: Archive images!

Stanje: novo, številka stroja/vozila: 1eb6bdba4d54d87ab018b84c2, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 445/45 r19,5, Further information Chassis Interchangeable Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of guide rollers removable, front and rear 4 container locks with robust outriggers on 20-ft basis for swap bodies 7.15 and 7.45 1 pair of gearbox support legs at the front, with straight base and one-sided operation on front right 2 wheel chocks with holders Side underride guard aluminum Rear underrun protection steel Half-shell fenders Mud flaps Drawbar for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, exact check required upon order) Drawbar without length adjustment Axles + Suspension SAF disc brake axles Axles/undercarriage laser measured to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system, color-coded line layout for easy service Air reservoir 208 liters Spring-loaded parking brake Duomatic connection at the front, with connecting line to the tractor unit, connection front left EBS, electronic braking system with EBS plug at the front, with connecting cable, connection front right Note: The trailer may only be towed by towing vehicles that ensure proper ABS function. With lifting & lowering valve, holding function in both lowered and raised positions Wheels and Tires 445/45 R19.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin foolproof plugs at the front, with connecting cable, connection front right Side-mounted LED work lights on both sides (switched via reverse light) LED work light at front center between carriers, rear-facing, switched via reverse light Operating Notes Special permit required if total towing length exceeds 18,750 mm. Please observe country-specific registration regulations. Country of Registration / Plates Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with reflective strips according to ECE R 048, side white and rear red Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Attention: Archive pictures! Rsdpji Ri Itsfx Agtjt

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension SAF drum brake axles Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 From leading manufacturers Twin steel rims, factory silver Braking system 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Rsdpfx Asi Riw Ajgtst Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: novo, številka stroja/vozila: 207ad28f83705ed0d38a4f174, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis Change Central-Axle Trailer Fine-grain steel welded construction Front stops, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 rear-flush (with 7.15 swap bodies not rear-flush, fork pockets/frame protrude) Telescopic support leg at front 1 pair gearbox support legs at front, with straight lower part and single-sided operation on FR right Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Semi-shell mudguards Rjdpfxji Ri Iae Agtst Mounting for truck-mounted forklift at rear, including 2 fork insertion pockets, 2 extendable support tubes, holder for chain safety device with locking pin. Rear underrun protection with lighting unit, foldable. Includes 2 loose rubber buffers for rear wall protection; counterweight recommended! Note: Partial low ground clearance when fitted with forklift, potential poor trailing behavior, no warranty! (Forklift self-weight up to max. 1,500 kg for trailers). (With proximity switch for forklift control in combination with lift axle). Due to the forklift mount, axles are shifted rearwards; mind load distribution when driving without forklift—customer's risk! (For swap body trailers, driving with a forklift is only permitted in combination with a swap body). Forklift mount as per AU 203670 adapted for 7.45 m swap bodies. Counterweight at front between frames, approx. 300 kg, if required—exact assessment still pending Towing device for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or final check required upon order) Lower coupling drawbar Drawbar without length adjustment Axles + suspension SAF drum brake axles as per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system Two-line compressed air brake system Color-coded line layout for easy servicing Spring-loaded parking brake Duomatic connection at front with line to tractor unit, located FR-left Duomatic connection at front with line to tractor unit, located FR-right EBS electronic braking system with EBS plug at front and connection cable, FR-left Note: Trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift and lower valve, hold function in both raised/lowered position Vehicle stability system Wheels and tires 235/75 R17.5, brand at manufacturer’s discretion Twin arrangement steel rims, factory silver Electrics 24 volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, side yellow LED lighting, protected installation! 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable, FR-left 2 x 7-pin sockets at FR-left rear for truck-mounted forklift 1 x 15-pin socket at FR-left rear for truck-mounted forklift LED worklights to both sides behind the 2nd axle (switched via reverse gear) Extra LED worklight at rear, switched via reverse gear Approval / License Plates Germany With Dekra inspection and certificate (per §13 EU FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on sides and red rear Paint Frame in DB 7350 Novagrau 10-year warranty

Stanje: novo, številka stroja/vozila: 06017a31026c05fc8f6ccf5ae, lastna masa: 3.055 kg, največja dovoljena obremenitev: 14.945 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Rjdei Ri Rcspfx Agtot Chassis: Swap body turntable trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20' base for swap bodies 7.15 and 7.45 meters Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-shell mudguards at the rear Drawbar turntable trailer coupling Drawbar with certified 40 mm draw eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Braking system 2-line air brake system, color-coded piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS plug at the front and connecting cable Note: The trailer must only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve, holding function for both positions Wheels and tires 235/75 R17.5, manufacturer brand at the manufacturer's discretion Steel twin rims, factory silver Electrics 24V system, LED multi-chamber lights with resistor, side marker lights in amber LED, license plate illumination in LED (Note: certain towing vehicles may show fault diagnoses despite correct function) 2 white front position lights in LED 2 white/red rear outline marker lamps in LED 1 x 15-pin plug at the front with connecting cable Additional LED work light at the rear, switched via the reversing light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t Redpfx Aoi Ri Rysgtot 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d24246f092ae53c0e155d19dd, lastna masa: 2.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 16.000 kg, Further information Chassis: Tandem trailer Steel welded construction with approximately 152 mm high floor assembly, load-oriented and torsion-resistant steel frame design. Longitudinal floor frame with a load-resistant outer frame and guiding tunnel spaced at 600 mm intervals, tunnel with top and side alignment guides, tunnel height approx. 45 mm. Four container corner castings suitable for 20ft interchange units. 4 Jumbo support legs for parking height of 970 mm, laterally extendable and can be folded by 90°, with short safety struts and locking device, frame-mounted pin lock and robust drop latch as secondary transit locking system, symmetrical arrangement of the support legs—Type A2 for CWB C 745/782 for parking height approx. 970 mm. Reinforcement between support feet. 7 pairs of recessed lashing rings in the outer frame, each rated for 2.5 tonnes. Heavy-duty pallet stops on both sides, approx. 20-25 mm high, lash points every 200 mm, loading height reduced by approx. 20-25 mm. Side door retainers. Rear underrun protection made from flat steel. Floor Anti-slip phenolic plywood, approx. 27 or 30 mm thick (at manufacturer's discretion), designed for high point loads, suitable for forklift axle loads up to max. 4400 kg. Front wall/corner stanchions Front stanchions 2,800 mm high, remainder closed with tarpaulin, steel corner stanchions in volume design, quick-release system for side curtain at front wall. Centre posts Redpfxokt Ni Uj Agtst 1 pair of sliding posts, fully adjustable lengthwise, with four latching pockets and an extended pocket at the bottom. Insert slats Three rows of aluminium V-insert slats or wooden slats as per manufacturer’s choice, One extra row of aluminium V-insert slats. Rear wall/rear corner stanchions Rear corner stanchions, steel up to the underside of the roof, tarpaulin hangers with round tube and tension ratchet. Rear portal doors, double-leaf, each door with two internal locking rods. Tarpaulin Tarpaulin with welded horizontal and vertical tension belts. Tension locks made from stainless steel. Roof Sliding curtain roof, rear end-lift foldable, roof can slide from rear to front, L-shaped roof beam suitable for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin colour: white. EcoLift - lifting roof, can be raised by approx. 380 mm, gas strut assisted. Approval / Plaques Country of registration: Germany Manufacturer certificate to EN 12642 XL Paintwork Frame: hot-dip galvanized Front corner stanchions: hot-dip galvanized Front wall: aluminium Rear corner stanchions: hot-dip galvanized Rear wall: white Tarpaulin: RAL 9005 deep black with advertising lettering Note: Images are archive photos.

Stanje: novo, številka stroja/vozila: a0a72d14f9b44bce47bc25ffb, konfiguracija osi: 1 os, velikost pnevmatike: 11,5/80-15,3 alliance, Further information 40 mm towing eye Support leg with wheel Tyres: 11.5/80-15.3 Alliance Without suspension Distance from towing eye to centre of fifth wheel plate: 3,200 mm Redpei Ri D Tjfx Agtst Tyre load capacity: 5,800 kg at 30 km/h + 5,150 kg at 40 km/h Without road approval, for internal use only!

Stanje: novo, številka stroja/vozila: b6e633155abf971a017e4b53b, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Chassis Turntable Trailer Disposal Fine-grained steel welded construction Carriage: The container is placed on the carriage from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external roller. Container Locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic actuation The container lock is of 2-point design, operating from the inside, and locking containers with internal crossbars is not possible. Turntable with robust ball bearing slewing ring Wheel chocks with holders Aluminum side underrun protection Rjdpfx Aoi Ri Nqegtet Steel rear underrun protection Half-shell fenders Rear impact protection vertically on left and right, with delta rubber on rear underrun holder Turntable trailer coupling device Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Steel rims factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobilizer: When the container lock is open, the spring-loaded parking brake is activated Vehicle Stability System 2 interchangeable coupling heads at the front, with connection lines to the towing vehicle, EBS electronic braking system with EBS plug at the front, with connection cable Note: The trailer may only be towed by tractors that ensure effective ABS function! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 additional LED work lamp at the rear, switched via reverse light 2 x 7-pin interchangeable plugs at the front, with connection cable Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tapes according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Stanje: novo, številka stroja/vozila: 8df1ead53cc82aeb51e50a37d, lastna masa: 4 kg, največja dovoljena obremenitev: 13.880 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Turntable Chassis for Waste Management Fine-grain steel welded construction Container locking: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is a 2-point version, acting from the inside; locking of roll-off containers with an internal web is not possible (for transporting roll-off containers with subframes according to DIN 30722). Note! At the beginning of the roller recess at the front, the container must be slid on completely flat! Longitudinal guide rails laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushroom fittings recessed into the upper and side outer frame, each with 5 t capacity 7 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included in delivery) 2 wheel chocks with holders Side underrun protection in aluminum Rear underrun protection in steel Quarter-shell mudguards according to EC standard With anti-spray mudflaps according to EC standard Drawbar equipment - Turntable trailer Towing bar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring chamber parking brake 2 polarity-proof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrical Equipment 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin polarity-proof plugs at the front, with connection cable Floor Steel floor Roller recess for container at the front recessed in the floor, for roll-off containers from 5,000–7,000 mm length Note: Slight floor undulation due to welding distortion is possible! Ramps Lockable storage compartment for ramps beneath the loading platform Rjdpfsi Ri Nusx Agtot Operating Notes At 10,000 kg axle load, a special permit is required. This permit must be applied for separately in each federal state; the legislature is not required to guarantee approval for a 20-ton GWV. Customer’s risk. The specified total weight is technically possible; depending on the cargo, the total weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning plate according to ECE - 70 Paintwork Frame DB 7350 Nova grey 15-year warranty against rust-through Note: Floor undulation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive images!

Stanje: novo, številka stroja/vozila: 6d88bda3a1ee2464a81b34f36, lastna masa: 4 kg, največja dovoljena obremenitev: 13 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Rodpfsi Ri N Aox Agtjt Chassis Low Loader Trailer Steel welded construction with a slight central camber, turntable with heavy-duty ball bearing slewing ring, chocks with holders, quarter shell mudguards in front of and behind each axle. Lashing Points Low Loader Over front axle: 2 pairs of ring lashing eyes (each 5 t) at the front on the cranked section Low-bed: 4 pairs of lashing eyes (each 6 t) at the sides of the lowbed 5 pairs of lashing eyes (each 5 t) between the longitudinal beams Drawbar Assembly Turntable Trailer Drawbar with certified 40 mm towing eye, mechanically adjustable in length by 6 x 100 mm increments and lockable (Drawbar length 1,700 – 2,300 mm) Axles + Suspension BPW drum brake axles with 10 t axle load each, slack adjusters. Continuous axle brake test up to 105 km/h. Rear axle can be removed manually. To do so, release air locking mechanism, lower the rear section to the ground, disconnect hydraulic hoses from rear section, insert the transport bar into a rear socket, and by gently pushing down and simultaneously pulling backwards, release rear section (parking brake released). After loading/unloading, move rear section into position and hook up to mark. Then raise rear section to driving height and connect hydraulic hoses. Confirm bolt locking (visual inspection if bolt snaps in) and check rear function. Air suspension with lift & lower valve. Wheels and Tires 235/75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver. Braking System 2-line compressed air brake system, spring-loaded parking brake, 2 fool-proof coupling heads at front with connection lines to tractor, EBS, electronic brake system with EBS plug at front with connection cable. Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow LED side marker lights, 2 white position lights front, 2 white/red lane control lights rear, revolving beacon with bracket, powered via parking light (removable), 2 pairs of warning boards double LED illuminated and extendable up to 3,300 mm, removable with plug, 2 x 7-pin fool-proof plugs at front with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor Steel/aluminum checker plate floor on cranked section, between longitudinal and cross beams with perforated cover plates. Axle cover not drive-over, widening to 3,000 or 3,300 mm possible. Operating Instructions Note! For 10,000 kg axle load, a special permit is required. Permit must be applied for separately in each federal state; the legislator is not obliged to grant approval for 20 t GVW. Customer’s risk. Special permit required if total train length exceeds 18,750 mm. Observe country-specific registration regulations. The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable in compliance with permissible axle, support, and fifth wheel loads. Observe BO-circle!!! Registration / License Plates Registration country: Germany, with Dekra inspection and report (per §13 EC-FGV), prepared for single-line license plate holder, ECE-70-compliant warning board, contour marking with reflective strips per ECE R 048 Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL black Attention: Archive images!

Stanje: novo, številka stroja/vozila: 81b04fd2e28f354df79a4c3b3, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5``, Further information Chassis: Central axle swap trailer Fine-grain steel welded construction Front stop, adjustable lengthwise and foldable 2 pairs of removable guide rollers, front and rear Locking-folding adapter + height adjustment for support height 1,000–1,120 mm, folding centre supports and guidance rollers repositionable upwards 4 container locks with robust outriggers on 20' base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at the front, with straight base and single-side operation, positioned front right 2 wheel chocks with holder Side underrun protection: Aluminium Rear underrun protection: Steel Half-shell mudguards Drawbar arrangement: Central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift; detailed verification required upon ordering) Undermount coupler drawbar, free drawbar length approx. 2,200 mm Axles + suspension: SAF drum brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system: 2-line compressed air braking system, colour-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle, connection front right EBS: Electronic Braking System with EBS socket at the front, with connecting cable, connection front right Warning: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lifting & lowering valve, holding function in both lower and raised positions Vehicle stability control system Wheels and tyres: 235/75 R17.5'', brand at manufacturer’s discretion Steel twin wheels, factory silver Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED marker lights 2 white position lights at front 2 white/red lane-keeping lights at rear 1 x 15-pin socket at the front, with connecting cable, connection front right 2 additional LED work lamps at the rear, controlled via reverse light 1 LED work lamp centrally at the front between the crossmembers, rear-facing, controlled via reverse light Rjdpfx Agei Riy Notst Operating instructions: The indicated gross weight is technically possible, yet depending on the cargo, the gross weight may not be reached when observing permitted axle, support, and kingpin loads. (Poor driving and trailing characteristics may result from improper weight distribution) Country of registration / Plates: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row licence plate holder Warning plate as per ECE-70 Contour marking with reflective tapes according to ECE R 048—side white, rear red Paintwork: Frame DB 7350 Novagrau 10-year warranty against rust-through Note: Archive images!

Stanje: novo, številka stroja/vozila: ccd5fddabaca94f260d9fe895, lastna masa: 2.950 kg, največja dovoljena obremenitev: 15.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 445/45 r19,5, Further Information Chassis Swap Trailer with Turntable Fine-grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable Rsdpfoi Ri Rksx Agtet 2 pairs of removable guide rollers, front and rear 4 container locks with robust outriggers based on 20-foot standard for swap bodies 7.15 m and 7.45 m Turntable with heavy-duty slewing ring 2 wheel chocks with holders Side underrun protection in aluminum Side underrun protection set inward for optimal clearance to swap body supports Rear underrun protection in steel Rear underrun protection shortened for optimal clearance to swap body supports, lighting installation is protected Quarter mudguards at the front and half mudguards at the rear Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy maintenance Air reservoir 208 liters Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to the truck tractor EBS, Electronic Braking System with EBS connector at front, with connection cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS operation! With raise & lower valve, hold function in both raise/lower positions Wheels and Tires 445/45 R19.5 tires, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, with connection cable 2 additional LED work lights at the rear, switched via reversing light 1 LED work light at the front center between the beams, rear-facing, switched via reversing light Country of Registration / Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Please note: Archive images!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2015, barva: drugo, Leto izdelave: 2015, = Druge možnosti in oprema = - Dvižna os - Krmiljena os = Opombe = Vliegen, 2015, BPW osi, 1. os dvižna, Ko so 3 osebe določale smer poti, Razkladanje preko drsne stene = Dodatne informacije = Zadnja os 1: Krmiljena = Podatki podjetja = Rodpfxsym Dche Agtot Bančni podatki: Račun pri Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred transakcijo vedno preverite naše bančne podatke! - Rezervacija vozil brez kavcije ni mogoča. - Pridržujemo si pravico do napak v besedilu in pisanju pri vseh ponujenih vozilih.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.817 kg, največja dovoljena obremenitev: 32.183 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 11/2015, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 65 r22,5, stanje pnevmatik: 90 odstotek, Leto izdelave: 2015, Oprema: ABS, dvižna zadnja plošča, Polpriklopnik je pripravljen za uporabo. Podzložljiva nakladalna ploščad 2,0 t. 6 novih pnevmatik. Različne shranjevalne omarice, na obeh straneh. Sledi uporabe, glejte slike. Lokacija: 13089 Berlin. Rsdpfex Rupbox Agtjt

Stanje: rabljeno, največja dovoljena obremenitev: 33.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2018, naslednji pregled (TÜV): 02/2026, Oprema: ABS, Fliegl SDS 390 polpriklopnik s ponjavo, BPW osi, zračno vzmetenje, uravnavanje višine, dvižna os, EBS, ABS Tehnični pregled do 02/26 Redpfx Agex A Rkpstet Polpriklopnik je bil v nesreči. Popolnoma vozen. Ponjava poškodovana.

Stanje: rabljeno, skupna masa: 18.000 kg, prva registracija: 09/2019, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, - Dvojna montaža pnevmatik - Mega, - 3 metre notranje višine - Stranski naklad Rodoxxxltopfx Agtet

Stanje: novo, številka stroja/vozila: dc46d2e1cd272305b99fb3160, lastna masa: 9.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Vehicle consisting of: Chassis low-bed semi-trailer Steel welded construction, kingpin plate with replaceable double kingpin and two kingpin positions 24-ton, 2-speed landing gear, single-sided operation, straight lower section, without thrust compensation Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminum Quarter mudguards in front of and behind the axle assembly 1st pair of wheel recesses embedded in the low-bed drive lane area after the gooseneck, tapered for entry. Lower length approx. 1,600 mm, recess depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Lower length approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the total height needs to be checked, please provide technical data sheets of the wheel loader types with exact information (if total height is exceeded -> customer responsibility, approval required), (depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer) Wheel recess covers extendable from the main frame, with wooden inserts. Extensions extendable to 3,000 mm (not in the rear bevel and not in the lower wheel recesses). (The track width of construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm.) Storage compartment for wooden planks on the gooseneck, crosswise at the front 70 mm planks for extension to 3,000 mm Lashing eyes low-bed trailer 2 pairs of ring lashing eyes, each 5t at the front on the gooseneck 11 pairs of lashing mushrooms recessed at the top and side in the external frame, each 10t 2x on gooseneck, 9x distributed on low-bed platform; first lashing point 250 mm from the front and last at max. 250 mm from the rear, distance between lashing points no greater than 1,100 mm 8 pairs of stake pockets recessed in the external frame, internal dimensions 70 x 40 mm, or instead of stake pockets, 5t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires Redpei Ri Hcefx Agtst 235 / 75 R 17.5 as per manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connecting line with lift & lower valve Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-equipped accordingly, not installed on truck; not a calibrated scale) Vehicle stability control system Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane mark lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without connection cable 1 x LED beacon with holder, switched via parking light (lamp removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/chequer plate covering Storage box embedded in the sloped transition to gooseneck Then with 70 mm softwood floor; in the lower wheel recesses and w

Stanje: novo, številka stroja/vozila: 364a8214fd0c4afa2b936c7db, lastna masa: 11.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2" kingpin and 2 kingpin positions (not in combination with forced steering) 24 t, 2-speed landing gear, single-side operation, with semi-circular lower part and straight connector plate, with load compensation Foldable rear support Wheel chocks with holders Aluminum side underrun protection Splash guards in front of the first axle and behind each axle, with anti-spray, according to EU standards Rodpfx Aji Ri E Uegtot Stainless steel toolbox, width=600 / height=400 / depth=500 mm, with polished lockable door Lifting table behind gooseneck, approx. 3000 mm long, hydraulically liftable for transition over gooseneck, with mechanical locking in raised position. Operated by remote control Electric winch, 24 volt, 8165 kg pulling force, mounted centrally at the very front of the load area on the gooseneck, installed in stainless steel box with door (subject to technical feasibility, to be checked in detail), operated by remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers on the gooseneck and rear incline Lashing eyes low-loader: Gooseneck: 5 pairs of lashing eyes integrated into the outer frame, each 5 t. 2 pairs of lashing eyes in the center, each 5 t. 1 pair of lashing points at the top and outside in the outer frame in the neck incline, each 10 t Deck: 4 pairs of lashing eyes integrated into the outer frame, each 5 t. 4 pairs of lashing eyes in the center, each 5 t. 1 pair of lashing points at the top and outside in the outer frame, each 10 t Lowered bed: 4 pairs of lashing eyes integrated into the outer frame, each 5 t. 5 pairs of lashing eyes in the center, each 5 t. 4 pairs of lashing points at the top and outside in the outer frame, each 10 t Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reverse light and additional locking function on the vehicle via hand knob Air suspension with raise & lower valve, hold function for lowering & auto reset function Wheels and Tires 235 / 75 R 17.5 by manufacturer’s choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS CAN bus signal for display in the driver’s cab (truck must be suitably equipped; not for trucks—no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Electrics 24 Volt, multifunction lights, yellow LED side lighting 2 white position lights at the front 2 white/red track marker lights at the rear All lights in full LED version (note: Some tractors may show diagnostic errors despite full function) 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cables Additional LED work light at the rear, switched via reverse light LED beacon with bracket, switched via parking light (removable beacon) Pair of warning boards, double LED illuminated and expandable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Grip serrated grating Low-bed area covered with Mega Grip serrated grating Rear incline covered with Mega Grip serrated grating

Stanje: novo, številka stroja/vozila: 3c70e9a5d82cfb3ada79baf95, lastna masa: 8 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 26 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Rsdpfxsi Ri Hrj Agtst Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, številka stroja/vozila: 7dbf076fea9ec110acb399f8f, lastna masa: 5 kg, največja dovoljena obremenitev: 32 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis Semi-Trailer Container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Container Mounts: Rear Extension Retracted: 1 x 20 ft or 1 x 30 ft flush with rear Central telescopic section 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Central telescopic section 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and extended over the rear Central telescopic section 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and bevelled corners Central telescopic section as interlocking central tube frame with bolt locking with rear height adjustment and foldable central supports for containers without tunnel Front container guide plug-in and removable (electrics, air, and brake connections at the front cross member) Plug adapter for front locking to secure containers without tunnel from underneath, with bracket for storage when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 ton, 2-speed landing gear, single-sided operation, with semi-round base and straight mounting plate, with travel equalizer 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection, galvanized steel Rear underrun protection extendable for 45 ft containers Half-shell fenders with anti-spray flaps as per EC regulations Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser measured to reduce tire wear and fuel consumption Axle spacing staggered mm (intermodal transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and traction aid, activation by applying brakes 3x (traction aid is functional up to 30% axle overload and a maximum speed of 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractor units that ensure the ABS operates effectively! with raise & lower valve Vehicle stability control system Axle load recognition via EBS CAN bus signal, for display in the driver’s cab; the truck must be accordingly prepared, no truck installation (not a calibrated scale) Wheels and Tires Rodpfx Aoi Ri R Ssgtst 385/55 R22.5 make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake lights in LED, side yellow LED lighting (Note! With certain tractor units, incorrect diagnostics may appear, even when function is assured) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Operating Instructions When transporting a 45 ft container with a short tunnel, with or without front extension, the permissible system length from kingpin to rear edge and the total towing length of 16,500 mm is exceeded! The rear underrun protection must be extended manually! An exemption permit pursuant to § 70 StVZo is required! Country of registration/plates Germany Approval as per EC 2007/46

Stanje: novo, številka stroja/vozila: 1f4581c873ed977cb9602039b, lastna masa: 3 kg, največja dovoljena obremenitev: 34 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis: Semi-trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin. Container mounts: 1 x 20 ft centered (or swap body container 7.15 / 7.45), front not retractable, twistlocks for the longer version of the container restraint 24 t 2-speed landing gear, single side operation, with straight base, without compensating rod 2 wheel chocks with holder Side underrun protection Aluminum rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip plate, with perforated tread plates, approx. 400 mm wide, left and right between drip tray and longitudinal beam 4 hose storage compartments approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 (outer) + 2 x DN 160 (centered), at the rear a hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) with all-round rubber seal, drain hole at lowest point, then without lid on hose pipes 1 stainless steel grounding lug in the right rear of the frame, with international grounding label on the frame Access steps rear right on underrun protection, at the rear right outside on main beam tread plate approx. 260 mm long and 300 mm wide Axles & suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Offset axle spacing mm (intermodal transport) up to 44t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, actuation 3x brakes (traction assist functions up to 30% axle overload and at speeds of max. 25 km/h) Brake system 2-line compressed air brake system Color-coded line routing for easy service Spring chamber parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: This trailer may only be towed by towing vehicles which ensure the effectiveness of ABS! With raise and lower valve Vehicle - driving stability system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be prepared for this, not installed on truck, not a calibrated scale) Wheels and tires 385/65 R22.5 brand at manufacturer's choice Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights in front 2 white/red lane marker lights at rear 1 x 15-pin socket in front, without connecting cable Operating notes Redpfx Aoi Rixksgtjt The specified gross weight is technically achievable; depending on the cargo, the permitted axle, support, and fifth wheel load limits may restrict the achievable gross weight. (Poor driving and tracking behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have "end load-transfer areas" (end crossbeam load transfer zones)! Country of registration / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 ADR approval according to 9.1.1.2 of the ADR, EX/II, EX/III / Approval certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning panel at rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Outline marking with reflective strips

Stanje: pripravljen za uporabo (rabljen), Rexroth IndraDrive M HMV01.1R-W0120-A-07-NNNN / MNR: R911312757 Power Supply Unit SN: HMV011-14390, used, in good condition, fully functional, scope of delivery as per photos Rjdpfx Aeu Dtlyegtot