Bortolin Kemo Mara H-M nakup rabljenega (95.481)

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 2.985 h, dvižna višina: 10.000 mm, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogonski sistem Pogonski sistem: kolesa Znamka motorja: Kubota Teže Lastna teža: 4.080 kg Funkcionalnost Nosilnost: 450 kg Delovna višina: 1.200 cm Označitev CE: da Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dodatne informacije Transportne dimenzije (D x Š x V): 3,18 m / 1,78 m / 2,56 m Vrsta terena: neraven teren Dodatne informacije Za dodatne informacije se obrnite na Tobiasa Mayra. Haulotte 12m dizelska dvižna ploščad (škarjasta) Štirikolesni pogon z avtomatskim sistemom za izravnavanje Zaradi velike višine prevoza so dvižne ploščadi Compact 12 DX primerne za delo tudi v najbolj zahtevnem terenu. Z nosilnostjo 450 kg in možnostjo za 3 uporabnike lahko opravljajo tudi najtežja dela. Stabilizatorji omogočajo delo tudi na zelo neravnem terenu. Proizvajalec: Haulotte, model: Compact 12DX, leto izdelave: 2007, odčitane delovne ure: 2985 ur, neto teža: približno 4080 kg, delovna višina: približno 12 m, višina ploščadi: 10,06 m, nosilnost: 450 kg, Kubota dizelski motor, možnost premagovanja naklona do 40 %, raztegljiva ploščad -> dolžina ploščadi 3,70 m, skupna dolžina. Ijdpfxezkppyj Afieig Transportne mere (D/Š/V): 3,18 m / 1,78 m / 2,56 m - ograja zložljiva, višina je nato 1,70 m. Na zahtevo se lahko izvede nov pregled v skladu z varnostnimi predpisi. Drugo: Možna ugodna dostava po vsej Evropi. Ogledi so možni samo po predhodnem dogovoru. Z veseljem bomo prevzeli vašo opremo / gradbeni stroje. Z veseljem vam bomo pripravili prilagojeno ponudbo financiranja ali lizinga (samo za poslovne subjekte). Če imate vprašanja, nas kontaktirajte. Vse cene veljajo na našem naslovu (86684 Holzheim). Vse navedene informacije so zgolj informativne. Pridržujemo si pravico do sprememb, tiskarskih in prenosnih napak ter vmesne prodaje. Vse informacije o barvi, opremi, stanju, lastnostih itd. ponujenih vozil so podane brez jamstva. Pridržujemo si pravico do tiskarskih in drugih napak ter vmesne prodaje. SkyJack 7,80m električna dvižna ploščad (škarjasta)

Stanje: rabljeno, Leto izdelave: 2016, Overview The bottling line for glass bottles (single-use and returnable) was in operation until recently at a small brewery in Germany. The system is configured for 0.33l longneck bottles and can fill up to 2,500 bottles per hour. The machine is still operational and can be inspected at any time by arrangement. The bottle washer and bottle unpacker can also be purchased separately. Technical Details Capacity: 2,500 bottles/hour Formats: Set up for 0.33l longneck bottles Filling temperature: 6°C Packaging: - 0.33l longneck bottles in 24-bottle cartons - 0.33l longneck bottles in 24-bottle modular crates Individual Machines / Line Components - New Glass Depalletizer | Füllmeister | Year: 2016 - Filler + Capper | H&K | VVF 14/3 | Year: 1966 Overhauled in 2016 with: - Pre-evacuation Iiedpfx Afol Hx Rpsisg - New rotary ball joint - New stainless steel table - New electrical system - New stainless steel valve control cabinet - 0.33-liter format guiding set - Sihi vacuum pump - Seals on lifting cylinders and filling valves replaced in 2023 - Vacuum and overpressure valves fitted with new seals and springs in 2023 - Bottle Unpacker | Joha | Year: 1982 - Packing head for 24 bottles in modular crate - Bottle Washer | Silmo | Praktika | Year: 1983 - 12 bottles per row - Labeler | Krones | Vinetta | Year: 1999 - Type 480-6-3-180 - Labeling stations for back labels, front labels and neck bands - Each with three glue pallets and gripper sponges - Glue pallets, gripper sponges, and sponge roller at bottle outfeed renewed in 2023 - Krones Unipump-H glue pump with glue heating - Packer | Pexco | Year: - - 1 head for 24 bottles in modular crate - New electrical installation and overhaul in 2016 - Residual Liquid and Finish Control | Miho | LC2000 - Detection of residual caustic from bottle washer - Closure control for crown cork/metal - Incl. Silmo inspection screen for visual control of cleaned bottles - Crate Washer | Fleischer - For longitudinal cleaning of empty plastic crates - Module size: 300x400mm - Overhauled in 2016 - Compressor | Alup | Allegro 19-10 | Year: 2016 - Oil-free - 4,897 operating hours Transport - Bottle transport: various conveyor belts + 90° bends - Crate transport/roller conveyor: overhauled with stainless steel frames and feet in 2016

Stanje: rabljeno, Postaja za praznjenje velikih vreč (0,5 m³, ventilator za vpihavanje) – Plastični kompresor HV 50/110 (600–700 kg/h, silo 4 m³ z dovajalnima vijakoma, mešalo, izpustni vijak, pogon DS 110 kW, 2 kompaktni diska Ø 500 mm z mešalnimi letevmi in vodnim hlajenjem, Siemens S7) – Naknadni mlin SML 45/100-S3-2 (sito 10 mm, 3x1 rotor/2 stator noža, strižna rezila, hlajenje z razpršenim meglicam, hidravlično odpiranje, 45 kW) – Fino sortiranje z zig-zag sitom in povratnim dovodom – Odvajanje materiala z dvojnim držalom za velike vreče MFT 45/350, ventilator 7,5 kW, ciklonski separator. Iiedpfx Afsz Aiuyeijg

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3232, delovna širina: 1.500 mm, delovna dolžina: 6.000 mm, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.500 mm, Na prodaj je CNC rezalni sistem MicroStep, serija MG, model MG 6001.15PrkGB+CH500P, leto izdelave 2022, delovni čas (bo dodan). Oprema: - Plazma rotacijski sistem za pripravo varjenih spojev s plazemskim virom energije Kjellberg Q 3000 Iiodpez A Tk Nsfx Afijg - popolnoma avtomatska podpora za varjenje z avtogenim plamenom - popolnoma avtomatska vrtalna glava MG-40-P26 z močjo 26,8 kW - naprava za rezanje cevi RSV 30-300 - filtrirni sistem TEKA ZPF 6H z močjo 11 kW Tehnični podatki: Območje obdelave: približno 6.000 x 1.500 mm + 500 mm delovni prostor maksimalna višina premika: približno 150 mm maksimalna obremenitev mize: približno 100 mm vodila v smeri X: linearna vodila s poševno ozobljenimi zobniki pogoni: digitalni, brezumdrževalni AC servomotorji z IRC hitrost pozicioniranja: do 40.000 mm/min natančnost pozicioniranja: ≤ 0,06 mm/m dvostranska ponovljivost: 0,05 mm/m Ogled: Ogled je možen na lokaciji v Wörth a. d. Isar. Ste zainteresirani? Stroj se prodaja na spletni dražbi. Za dodatne informacije in dokumentacijo nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 325 mm, skupna širina: 185 mm, skupna dolžina: 483 mm, skupna masa: 16 kg, vrsta hlajenja: voda, električna varovalka: 16 A, varilni tok pri 100% delovnem ciklu: 175 A, varilni tok (min.): 5 A, varilni tok (maks.): 250 A, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Kompletni set: LORCH T 250 DC Basic Plus WIG varilni aparat z vodnim hlajenjem WUK 7 in dodatno opremo Prodaja se profesionalni industrijski varilni aparat vrhunske znamke LORCH, model T 250 DC Basic Plus, v kombinaciji z inovativno napravo za vodno hlajenje WUK 7. Sistem je zasnovan kot mobilna večnamenska enota in kot polno funkcionalna delavniška naprava, odlikuje pa ga najsodobnejša inverter tehnologija. Proizvajalec: LORCH (proizvedeno v Nemčiji) Model: T250 DC Basic Plus, vključno z opcijskim vodnim hlajenjem WUK 7 Stanje: zelo dobro, popolnoma delujoče Lokacija: Graz _____ Obseg dobave (kompletni set): • LORCH T 250 DC Basic Plus WIG inverter varilni aparat • LORCH WUK 7 naprava za vodno hlajenje (neposredna povezava LorchNET) • WIG varilna pištola, vključno s cevovodom Iiodpfeyxvwiox Afieg • Maseni kabel • Vzdrževalna enota za plin / regulator tlaka Nova cena je bila približno 6000 € _____ Pomembne lastnosti: • Inovativna rešitev z enim kablom: zahvaljujoč sodobni povezavi naprave za hlajenje, celoten sistem (inverter + vodno hlajenje) potrebuje le en sam omrežni kabel. Napajanje in pametno, na potrebe prilagojeno upravljanje WUK 7 poteka neposredno prek zadnje strani vira varilnega toka. Brez zapletenih kablov med montažo! • Vrhunska inverter tehnologija: polnih 250 A varilne moči v kompaktni zasnovi. • Funkcija FastPuls (do 2 kHz): idealna za varjenje izjemno tankih pločevin brez deformacij. • Robustna mobilnost: izjemno lahka osnovna enota (samo 16 kg), idealna za težke razmere v avtomobilski industriji, kleparstvu ter gradnji rezervoarjev in cevovodov. _____ Tehnični podatki: • Območje moči: 5 – 250 A • Delovni cikel (ED) pri 40 °C: 60 % = 200 A / 100 % = 175 A • Omrežna napetost: 400 V (varovalka 16 A) • Hladilna moč (WUK 7): 0,53 kW • Teža: približno 16 kg • Dimenzije varilnega inverterja Lorch T 250 DC: 483 x 185 x 325 mm (D x Š x V) • Dimenzije naprave za vodno hlajenje Lorch WUK 7: 547 x 212 x 265 mm (D x Š x V) _____ Naprava je v delovno pripravljenem stanju. Ogled in preizkus po dogovoru možna.

Stanje: rabljeno, vrsta prenosa: samodejen, dvižna višina: 44.000 mm, Leto izdelave: 2018, obratovalne ure: 4.093 h, Sennebogen 673e gosenicarski teleskopski žerjav Letnik: 2018 Delovne ure: 4.093 h Dvižna višina z jib-om: 44 m (36 m + 8 m) Stranski doseg: 38,5 m Pick & Carry z do 100 % nosilnosti vklj. pregibni vrh jib-a 8.000 mm (montaža brez dodatne opreme) Nastavljivo podvozje do 4.800 mm (transportna širina: 2.980 mm) Elektrohidravlični agregat za nujne primere Radijsko daljinsko upravljanje Radijski sprejemnik Programabilna omejitev delovnega območja Nagibna kabina do 20° Vzvratna in stranska kamera Dizelsko ogrevanje Iiedpfx Afjzg Abhjieg Črpalka za pretakanje goriva Klimatska naprava Centralno mazanje Motor: Cummins B6.7 [168 kW/228 KM], stopnja 5 Skupna masa: 71.500 kg Balast podvozja: 8 t Balast zadaj: 17,8 t Na vašo željo vam pripravimo ponudbo za leasing ali financiranje. G. Mihm (tel.) vam je z veseljem na voljo. Več informacij najdete na naši spletni strani. Pridržujemo si pravico do napak in predhodne prodaje! Kabina, najem možen = Dodatne informacije = Znamka motorja: Diesel Dvižna kapaciteta: 70.000 kg Za več informacij kontaktirajte Tobias Eberta.

Stanje: rabljeno, Leto izdelave: 2022, Linija za pripravo štrukljev Lippelt Mini Rustica Touch GST Primerna za pripravo ciabatte in štrukljev različnih oblik/specialnih štrukljev Pretok testa do 300 kg na uro Leto izdelave: 2022 Stanje: pregledano in očiščeno Pokrov iz nerjavečega jekla Upravljanje na dotik z upravljanjem receptov Opremljena z giljotino in matrično prešo Postaja za rezanje, tip: Rumo 7 Vključno s 3 rezalnimi valji (produkcija v 1-4 vrsticah) Vključno z 2 matričami Dodatna oprema na zahtevo Iodpez A Ryhofx Afioig

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 24.209 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 286-56, skupna višina: 3.000 mm, skupna dolžina: 4.545 mm, skupna širina: 2.450 mm, širina mize: 860 mm, višina mize: 975 mm, skupna masa: 10.800 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 7.500 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Naprodaj je proizvodni center CHIRON FZ15 W Magnum, model 286-56, letnik 2014, ki omogoča obdelavo z visoko hitrostjo. Stroj je hitra, enovretenčna strojna orodja z vgrajenim menjalnikom in krmilnikom FANUC (serija 31i), zasnovan za produktivno serijsko obdelavo kovinskih in plastičnih delov (rezkanje, vrtanje, navojčenje, razširjanje, izvajanje). Tehnični podatki: Krmilnik: FANUC 31i Hodi X/Y/Z: 730 / 400 / 360 mm Hitri pomik X/Y/Z: 75 m/min Največja hitrost vretena: 12.000 min⁻¹ Moč vretena: 7,5 – 15,0 kW Največji navor vretena: 95 Nm Vpenjalna glava: HSK-A63 Revija za orodja: verižna revija, 48 mest Največja dolžina orodja: 300 mm Največji premer orodja: 78 mm (140 mm pri prostem dodatnem mestu) Največja teža orodja: 8 kg (10 kg pri ojačanih mestih) Menjalnik orodij (niha/obračalna naprava), razdalja med nosilci 800 mm, največja višina naprave 234 mm Zaprt kabinet, hladilno-mazalna emulzija Iodszv Tlvopfx Afieig Oprema / periferna oprema: Hladilni sistem TPF 350S (Bürener) s filtrom iz papirnatega traku in dvojnim varnostnim filtrom, prostornina okoli 980 l Notranje hlajenje orodij (visok tlak preko vretena) Transportni sistem za odrezke Sesalni sistem / sistem za odstranjevanje emulzijskih meglic (Handte, EM Compact 800) Hladilnik za omarico z upravljalnikom Centralno oljenje Tipni senzor za mizo Renishaw TS27R Pralna pištola Funkcije za varčevanje z energijo in vklop (PowerSave / WarmUp) Priključni podatki: Električni priključek: okoli 27 kVA, priključek M40 Stisnjen zrak: min. 5,5 bar, okoli 510 Nl/min Priključek za hladilno sredstvo DN40 Dimenzije / postavitev: Površina postavitve: okoli 4.543 × 4.441 mm (D × Š, vključno s periferno opremo) Višina: okoli 2.405 mm (največ 3.042 mm s sesalnim sistemom)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 230 mm, premer struženja: 410 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 230 mm, CNC Horizontal Lathe Doosan PUMA H-310/TM, year 2008, equipped with FANUC Series 18i-TB control, ideal for precision machining of medium-sized components, featuring dual turret machining capabilities. Iijdpfx Afowt S Ugeijg Main technical specifications: Maximum turning diameter: Ø 410 mm Maximum turning length: 230 mm Recommended turning diameter: Ø 255 mm Maximum distance between spindle centers: 500 mm Axis travels: X: 210 mm Z: 230 mm Rapid traverse (X/Z axes): 24,000 mm/min Main spindle: Chuck: Ø 250 mm Spindle nose: ASA A2-8 Speed: 3,500 rpm Power: 15/18.5 kW Turret system: Number of turrets: 2 Stations per turret: 12 Live tooling: Speed: 3,000 rpm Power: 4 kW Tool dimensions: 25x25 mm (turning) / Ø 40 mm (boring) Included accessories: - Chip conveyor - Coolant tank with wash pump - External high-pressure pump - Various fixed and driven tool holders - Manuals, electrical diagrams, CE Declaration Compact, versatile, and high-performance machine, ideal for multitasking operations in high-efficiency production environments.

Stanje: rabljeno, Leto izdelave: 2019, Linija za izdelavo štrukljev Lippelt Mini Rustica Touch GST Primerna za proizvodnjo štrukljev ciabatta ter štrukljev v obliki kocke/posebnih štrukljev. Iodpfxsz A Side Afijig Pretok testa do 300 kg na uro. Letnik: 2019 Stanje: preverjeno in očiščeno. Ohišje iz nerjavečega jekla. Upravljanje na dotik s funkcijo upravljanja receptov. Opremljena z gilotino in orodjem za oblikovanje. Postaja za rezanje, tip: Rumo 7. Vključno s 3 rezalnimi valji (proizvodnja v 1-4 vrstah). Vključno z 2 kalupi za štruklje. Dodatna oprema na zahtevo.

Stanje: rabljeno, Potni hod: x 400 mm y 375 mm z 250 mm Velikost mize 200 x 800 mm Število vrtljajev 50 – 3150 vrt/min Vpenjalna glava SK 40 Gib vretena 50,0 mm Iedpfozzxfrex Afioig Hitri pomik 2,4 / 1,6 m/min Krmilnik Philips Dimenzije (D-Š-V) 1860 x 1790 x 1750 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Prodam dve medoperacijski sušilni napravi za tisk na tekstilijah podjetja M&R Reno HW. Cena za eno napravo je 1000 EUR. Isdpjxfkm Njfx Afijig Naprave so v našem obratu v popolnem delovnem stanju od samega začetka. V drugih oglasih ponujamo tudi številno dodatno opremo za tisk na tkaninah: plinsko peč za sušenje M&R Sprint M2000, medoperacijske sušilne naprave, 80 okvirjev za sitotisk Newman-roller, sistem za hitro nastavitev Trilock, kopirni stroj za sitotisk in drugo.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.681 h, Funkcionalnost: popolnoma funkcionalen, delovna širina: 550 mm, površinska zmogljivost: 3.025 m²/h, skupna masa: 380 kg, trajanje garancije: 12 meseci, kapaciteta rezervoarja za vodo: 75 l, The Taski Swingo 2100 µicro scrubber-dryer is a highly efficient machine, suitable even for the toughest jobs in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly checked all machine functions. All mechanical components showing wear or signs of use were replaced with new parts. This ensures long, trouble-free operation without the need for additional investments in the machine in the future. The unit is now in excellent condition and ready for immediate use. The machine comes with a 12-month warranty (excluding wear parts). We offer the option to present the machine live via an online connection. You can view the machine in operation and see all features and equipment live. We are happy to answer any of your questions. Product features and equipment: - NEW GEL BATTERIES 6V 175Ah SIAP (4x) - Year of manufacture: 2021, 1681 operating hours - 550mm cleaning head, equipped with two new medium-hardness disc brushes, enabling work on any surface Iiodeymd S Njpfx Afisg - New polyurethane suction lips, resistant to contact with oils, greases, and petroleum substances - The unit comes with new, durable drain and suction hoses - High suction performance thanks to the suction turbine - Every device we offer is documented with individual photographs – you buy exactly the machine you see Technical data: - Supply voltage: 24V - Working width of brushes (mm): 550 - Working width of squeegee (mm): 630 - Theoretical area performance (m²/h): 3025 - Fresh/dirty water tank capacity (l): 75/75 - Working speed (km/h): 5.5 - Number of brushes (pcs): 2 - Weight without batteries (kg): 185 - Total weight, operational (kg): 380 Included equipment: - NEW GEL BATTERIES 6V 175Ah SIAP (x4) - NEW 280mm disc brushes (x2) - NEW suction hose - NEW drain hose - Squeegee with new rubbers - Plus many other small components

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 700 mm, pomik osi Y: 700 mm, pomik po osi Z: 700 mm, hitrost pomika os X: 60 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 60 m/min, nazivna (navidezna) moč: 68 kVA, proizvajalec krmilnikov: HEIDENHAIN iTNC 530, višina obdelovanca (maks.): 1.000 mm, premer obdelovanca (maks.): 800 mm, teža obdelovanca (maks.): 600 kg, skupna višina: 2.547 mm, skupna dolžina: 5.866 mm, skupna širina: 4.196 mm, širina mize: 500 mm, dolžina mize: 500 mm, skupna masa: 12.000 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 34.000 W, število mest v zalogovniku orodij: 120, Oprema: dokumentacija / priročnik, transportni trak za ostružke, CNC control: HEIDENHAIN iTNC 530 Axes: Travel X-axis (mm): 700 Travel Y-axis (mm): 700 Iiodpowhdhzefx Afiog Travel Z-axis (mm): 700 Distance spindle nose to table surface (mm): 100 - 800 Rapid traverse (m/min): 60 Axis acceleration (m/s²): 6 / 6 / 5 Working table: Number of pallets: 2 + 5 Pallet dimensions (mm): 500 x 500 Max. workpiece size (D x H) (mm): 800 x 1,000 Max. workpiece weight (kg): 600 T-slot version: DIN 55201-A2 Pallet change time (sec): 9.5 Standard division (degrees): 360º (1º) Spindle: Max. spindle speed (rpm): 18,000 Spindle drive power (kW): 34 / 28 Spindle torque (Nm): 110 Tool system Tool holder: HSK-A63 Number of tools in magazine: 120 Max. tool diameter (mm): 80 Max. tool length (mm): 550 Max. tool weight (kg): 12 Chip-to-chip time (sec): 2.9 Equipment: Electronic handwheel Chip conveyor Rotating safety glass Rinse gun Signal light Tool breakage probe 3D quickSET Work area lighting CE conformity Air blast through spindle center, selectable via M-code MPC – Machine Protection Control Paper band filter Infrared probe Heidenhain TS640 Blum laser tool measurement Taper cleaning brushes Blum laser NT Hybrid Round Pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Coolant supply through spindle (bar): 40 BAR Tank capacity (liters): 980 High-pressure cooling (bar): 40 BAR Machine hours: Power-on hours: 95,210 Total connected load (kVA): 68 Operating hours: 44,971 Basic machine: Dimensions/Weight: Length (mm): 5,866 Width (mm): 4,196 Height (mm): 2,547 Weight (kg): 12,000.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 600 kg, vpenjalna sila: 80 kN, skupna širina: 2.800 mm, skupna dolžina: 4.000 mm, skupna višina: 2.260 mm, Główne cechy: 1. System sterowania komputerowego (PLC) – japoński PLC Mitsubishi 2. Szafa elektryczna – wszystkie podzespoły elektryczne pochodzą od światowych marek, gwarantujących jakość i niezawodność 3. Ekran dotykowy – komputerowy system sterowania INOVANCE 4. Zaawansowany siłownik hydrauliczny z Niemiec 5. Prowadnica liniowa 6. Falownik ABB (Szwajcaria) oraz Rexroth (Niemcy) 7. Dużej średnicy rury stalowe ocynkowane 8. Platforma podnoszona elektrycznie 9. Grzałka ceramiczna 10. System hydrauliczny i połączenia zaworowe – Yuken Industry Specyfikacja techniczna: • Materiał: PE, PP i inne • Maksymalna objętość: 6 l Iijdpfx Afjv Iflpeijg • Wydajność produkcji: 170–260 szt/h • Wymiary: 4,0 × 2,26 × 2,8 m • Waga: 6 T System plastyfikacji: • Reduktor: utwardzane koła zębate, wysoka wytrzymałość, niska emisja hałasu • Ślimak: Ø 70 mm, L/D 24, stal 38CrMoALA, dostępny system chłodzenia • Wydajność plastyfikacji: 100 kg/h (HDPE) • Strefy grzewcze: 3–4 grzałki aluminiowe, grzanie automatyczne • Moc grzewcza: 12 kW/h • Silnik wytłaczarki: silnik asynchroniczny trójfazowy (380 V, 50 Hz) • Wentylator chłodzący: 4 strefy, automatyczne chłodzenie System wytłaczania: • Materiał: wysokogatunkowa stal stopowa, podawanie centralne • Ilość głowic: 1 • Maks. średnica głowicy: Ø 160 mm • Strefy grzewcze: 4, grzanie ze stali nierdzewnej • Moc grzewcza: 5–7 kW System zamykania: • Cechy: wysoka wytrzymałość, sztywność, centralne ryglowanie, stabilne otwieranie i zamykanie formy • Siła zamykania: 80 kN • Zakres regulacji odległości płyt: 170–520 mm • Maks. wymiar formy: 380 × 420 mm System elektryczny: • Automatyczny monitoring, alarmy usterek, licznik automatyczny, funkcje pomocnicze • Interfejs sterowania: ekran dotykowy z systemem autodiagnozy • Kontrola temperatury: automatyczny moduł kontroli temperatury • Kontrola ruchu: Inovance (wersja chińsko-angielska) System hydrauliczny: • Cechy: wielofunkcyjny zintegrowany blok hydrauliczny, sterowanie proporcjonalne, wysoka wydajność • Silnik pompy olejowej: trójfazowy asynchroniczny (380V/220V, 50/60 Hz) • Pompa olejowa: importowana pompa podwójna • Zawory: importowane zawory i połączenia pompy oleju • Przewody olejowe: dwuwarstwowe, odporne na ścieranie • Ciśnienie systemowe: 60 kg/cm² • Układ chłodzenia: oddzielny obieg wody, chłodnica oleju System pneumatyczny: • Marka: system pneumatyczny AIRTAC (Tajwan) • Ciśnienie robocze powietrza: 0,6 MPa • Wydajność powietrza: 0,8 m³/min • Zawór elektromagnetyczny: AIRTAC (Tajwan) Główne podzespoły Elementy elektryczne: • System sterowania PLC: MITSUBISHI (Japonia) • Ekran dotykowy: INOVANCE • Sterownik temperatury: HUICHUAN • Przekaźnik pomocniczy: OMRON • Styki: Schneider (Francja) • Silnik elektryczny: trójfazowy 380V • Zasilacz: TAIWAN MEANWELL • Przetwornica: ABB (Szwajcaria) Elementy hydrauliczne: • Pompa olejowa: TAIWAN HIGH-TECH • Zawór: YUKEN • Pompa i połączenia: YUKEN • Uszczelnienia: HALLITE System pneumatyki: • Siłownik: AIRTAC • Zawór powietrza: AIRTAC Maszyna do rozdmuchu wtryskowego została zakupiona bezpośrednio z fabryki w Chinach na potrzeby projektu, który nie został zrealizowany. Maszyna była użytkowana tylko przez jeden miesiąc. Lokalizacja: Siemianowice Śląskie, Polska Dostępne są również urządzenia peryferyjne na sprzedaż: • System chłodzenia powietrzem 5 HP • Podajnik automatyczny • Mieszalnik do barwnika 150 kg • Rozdrabniacz odpadów

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, vpenjalna sila: 9.000 kN, Oprema: dokumentacija / priročnik, _ENGEL DUO 1800H/1800M/900 WP 2FCLS – Popolni tehnični podatki_ Letnik proizvodnje: 2015 Sistem nadzora: CC300 Sila zapiranja: 9.000 kN (900 t) Sistem QMC: luknja za vijak _— Enota za zapiranje —_ Min. višina matrice: 1.300 mm Maks. višina matrice: 2.100 mm Velikost mize (Š × V): 1.850 × 1.810 mm Razdalja med batnicami (Š × V): 1.420 × 1.170 mm Hod odpiranja: 1.800 mm Pozicionirni obroč – fiksna plošča: Ø 250 mm Pozicionirni obroč – premična plošča: Ø 250 mm Maks. skupna teža orodja: 21.000 kg _— Brizgalna enota 1 —_ Razmerje L/D: 20 Premer vretena: Ø 60 mm Prostornina valja: 763 cm³ Pretok vbrizgavanja: 317 cm³/s Maks. hidravlični tlak: 180 bar Maks. specifični tlak: 1.960 bar Hod vretena: 270 mm Maks. hitrost vrtenja vretena: 253 vrt/min _— Brizgalna enota 2 —_ Razmerje L/D: 20 Premer vretena: Ø 60 mm Prostornina valja: 763 cm³ Pretok vbrizgavanja: 317 cm³/s Maks. hidravlični tlak: 184 bar Maks. specifični tlak: 1.960 bar Hod vretena: 270 mm Maks. hitrost vrtenja vretena: 253 vrt/min _— Kalup / periferni del —_ Jedra fiksne plošče: 1 Jedra premične plošče: 1 + 4 na vrtljivi mizi Konusne cone: 16 Sekvenčne nadzorne cone: 48 Iisdpfxoz Az Iae Afisg

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljeno napravo Duplo za izdelavo brošur, model 3500. Sestavljajo ga naslednji deli Duplo: DSF-2000 Serijska številka: 150300313 Letnik izdelave: 2015 Ijdozx Ah Sopfx Afisig Duplo DBM-350T Serijska številka: 100300564 Letnik izdelave: 2010 Napravo je lani vzdrževalo podjetje Ammerer. Če imate kakršna koli vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: novo, Extraction capacity (filter unit at nozzle*): 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 68 dB(A) Dimensions L/W/H in mm: L 1290 / W 345 / H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltages or colours available on request Application: Separation of emulsion mist, suitable for medium to very large machine workspaces. Your benefits with the COBARON series: - 15 device variants available Iisdeh Rfbqopfx Afijg - Direct from the manufacturer - ISI-TRONIC standard (digital filter control system) - Electronically controlled EC fan as standard - Adjustable speed and air volume - Available with various filter configurations - High-quality filter media for pre-filter and main filter stages - Separation efficiencies up to 99.95% - Extensive range of mounting and connection accessories - Flexible adaptation to your application - Optimised service life - Quality Made in Germany With COBARON, we offer a filtration system that accommodates today’s wide range of machining processes and their respective contaminant profiles. Even within the standard range, the COBARON combination filter system offers various filter configurations and thus can be variably adapted to numerous applications. The different expansion stages of the COBARON series have been specifically developed for applications that are borderline cases for many filter systems (mechanical or electrostatic). Combining both proven filter principles in the appropriate application increases the effectiveness of air filtration and extends service intervals. COBARON can be operated as a purely mechanical filter device with various filter stages, or additionally configured with an electrostatic filter cell. Our filter units already come standard with digitalisation features and, for example, can be controlled via laptop.

Stanje: novo, Electrostatic air filter for ventilation systems – central extraction ELBARON - RON 15 S oGk – 15,000 m³/h – 230 V – without fan Maximum air flow: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltages and special colours available on request Application: The ELBARON duct air filter series is designed for central air filtration in production halls as well as building and plant engineering. Iedpfx Afjh Rfcceieig Your benefits: - 15 model variants available - Direct from the manufacturer - High separation efficiency - Modular extension possible - Easy maintenance - Low follow-up costs due to reusable filter media - Available in simplex (single-stage) or duplex (two-stage) configurations - Wide range of air flow rates available - Also available in mirrored configuration - Robust construction - Quality made in Germany Based on our proven filter technology developed over many years, this filter unit can be used as a central air filtration system in ventilation ducts. The ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air, ensuring effective air purification in your production area. Our air filter can also be easily integrated into central extraction systems for machine exhaust. With ELBARON filter units, downstream heat exchangers or air-conditioning units are protected from premature contamination. The ELBARON filter technology is based on environmentally-friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large-scale production facilities, thanks to their high separation efficiency, large capacity, and ease of maintenance. Take advantage of the enormous potential of ELBARON duct air filters with minimal maintenance costs. All our electrostatic filter cells and filter media can be easily cleaned and reused.

Stanje: novo, Extraction capacity of filter unit at nozzle*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz, 1Ph+N+PE Noise level*: 67 dB(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany Iijdpfx Afeh Rynqjiog * Depending on filter configuration Special voltages or custom colours available on request Application: Separation of emulsion mist, for small to medium-sized machine workspaces. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Speed and airflow adjustable (optional) - Washable pre-filter - Separation efficiency up to 99.95% using H13 HEPA filter - Wide range of installation and connection accessories - Flexible adaptation to application requirements - Optimised service life - Quality made in Germany With our TEBARON, we offer a compact air filtration unit tailored to meet the diverse demands of modern machining processes and the resulting emission profiles. The TEBARON is designed as a compact air filtration solution for the separation of emulsion mist in small to medium-sized machine workspaces. Our primary development focus was on achieving compact dimensions combined with maximum energy efficiency, cost-effective operation due to low follow-up costs, and maximum sustainability. To fulfil these objectives, the TEBARON series is equipped with high-efficiency, adjustable EC fans. The standard integrated pre-filter package consists of three fully washable stages, providing high effectiveness against liquids and medium-to-large particles to protect the main filter and maximise its service life. The main filter can be customised to the specific application. As standard, we use an H13 HEPA filter, providing a separation efficiency of 99.95% for particles as small as 0.3 μm.

Stanje: novo, Extraction capacity of filter unit at the nozzle*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz, 1Ph+N+PE Noise level*: 67 dB(A) Digital filter control: yes Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on filter configuration Special voltages and colours available on request Application: Separation of emulsion mist, suitable for small to medium machine working spaces. Your advantages: - Compact dimensions - ISI-TRONIC as standard - Electronically controlled EC fan as standard - Adjustable speed and airflow Ijdpfxeh Rynuo Afisig - Washable pre-filter - Up to 99.95% separation efficiency with H13 HEPA filter - Wide range of installation and connection accessories - Flexible adaptation to various applications - Optimal service life - Quality made in Germany With our TEBARON, we offer a compact air filtration unit that meets today's diverse machining solutions and their resulting contaminant profiles. The TEBARON is specifically designed as a compact air filter device for small to medium machine workspaces for the extraction of emulsion mist. Our main development goals focused on compact design with maximum energy efficiency, cost-effective operation through low follow-up costs, and highest sustainability. To achieve these aims, we use highly efficient, variable EC fans in the TEBARON series. The standard integrated pre-filter package is three-part and completely washable, providing high efficiency against liquids and larger to medium particles to protect the main filter and maximise its service life. The main filter can be individually configured to suit the specific application. As standard, we use an H13 HEPA filter, delivering up to 99.95% separation efficiency for particles of 0.3 μ.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-Shredder PMG-H 900 – immediately available – as new For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation unit • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed at a customer's site, tested, and subsequently properly dismantled. Due to a project change, the plant is now being offered. Condition: nearly new (test operation only) Availability: immediately from stock – no lead time Price: attractive cost-saving compared to new equipment — Special advantages: • Immediately available – no months-long lead times as with new machines • Only used for test runs – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminium cables – no pre-sorting required. The system includes: • Granulator (cutting mill) • Zig-zag separator • Turbine for fine grinding • Dry separation table Iiedpjy Ahlysfx Afiog Material purity up to 99%. In combination with the PMG-H 900 pre-shredder, this produces a powerful recycling line for industrial applications. — Technical data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminium cables — Technical data Pre-Shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The system is available at short notice. Subject to prior sale. Viewing possible by arrangement.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, PULSOTRONIC M-Pulse2 BD HD 650X150 MFT | Metal Detector / Metal Detection System Manufacturer: PULSOTRONIC-Anlagentechnik GmbH Iisdpozagnmjfx Afieg Model/Type: M-Pulse2 BD-HD 650x150 MFT Serial Number: 90008573 Year of Manufacture: 2020 Power Supply: 115/230 V | 16 A | 50-60 Hz Overall Dimensions: 1700 x 1100 x 1250 mm Belt Conveyor Dimensions: 1200 x 610 mm Aperture: 650 x 150 mm Operating Pressure: 4-6 bar The professional, conveyor-type metal detector Pulsotronic M-Pulse2 BD HD is an advanced X-ray and magnetic inspection system, designed for the highest standards of safety and quality control in the food industry (meat, processing, bakery) as well as logistics. Thanks to Multi-Frequency Technology (MFT), the device offers exceptional sensitivity for detecting ferromagnetic, non-ferromagnetic, and stainless steel contaminants, effectively eliminating the so-called 'product effect' (common during inspection of moist meat, cheese, or fresh bakery products). The wide detection head with a 650 mm x 150 mm aperture enables simultaneous inspection of a broad flow of loose products, large raw material blocks, or ready-made dishes in bulk or retail packaging. The integrated belt conveyor, sized 1200 x 610 mm, ensures full stability for product handling. The system is prepared to accommodate an automatic pneumatic rejection unit (requires air supply of 4-6 bar), which removes defective product batches without halting the entire production line.

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Proizvajalec DREHER Tip 1676 A Številka prenove 2016 A-12/615 Vrsta stroja Stroj za uravnavanje/usmerjanje materiala Iijdpfx Afezu Av Ieijg Število uravnavalnih valjev 7 Premer uravnavalnih valjev 80 mm Širina materiala 300 mm Debelina materiala 0,5–4,5 mm Hitrost podajanja materiala, približna vrednost do 30 m/min Nastavitev uravnavanja materiala: ročna/mehanska Indikator položaja: 3 mehanski indikatorji, vidni

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 150 mm, The KT1200 coordinate table with TSB 35 (drilling machine by Knuth) delivers high efficiency – maximum time savings, as time-consuming manual measuring, marking, center punching, and positioning with high tolerances are eliminated. Functionality – precise positioning capability and absolute repeatability thanks to adjustable stops. Coordinate Table Technical Specifications: Max. travel, x-axis: 1,200 mm Max. travel, y-axis: 150 mm Max. workpiece weight: 60 kg Vices: 2 pcs. Iisdpfx Aex E Sl Njfiog Vice max. clamping width: 158 mm Vice max. jaw opening: 140 mm Required space (LxWxH): 1850x560x2000 mm Repeatability: +/- 0.2 mm Electronic position indicators Position stops: 8x (x-axis) Traverse movement x and y: 2x handwheel with clamping Knuth TSB 35 Drilling Machine Technical Specifications: Drilling capacity in S235JR: Ø 35 mm Continuous drilling capacity in S235JR: Ø 25 mm Thread cutting in S235JR: M22 Spindle taper: MT 4 Speed range: 125 – 3030 rpm Subject to prior sale. No liability for typographical errors or inaccuracies.