Balluff Bis C-302-10 nakup rabljenega (73.834)

Stanje: zelo dobro (rabljeno), Weiss Type: WK 27'/50-150 Climatic Chamber Water-Cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor Load Capacity: 30000 N/m² (Surface Load) Test Chamber Volume: Approx. 27,000 Litres Sample Mass: 1000 kg Cooling/Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Stability: ±0.3 to 1.0 K (Over Time) Temperature Stability: ±0.1 to 0.5 K (Over Time) Climatic Operation: 10 – 90°C Humidity: 10...98% rH Temperature Stability: ±0.1 to 0.5 K (Over Time) Dew Point Range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A With additional base plates to increase floor load capacity Important Safety Information for Buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Lhjdpfx Adsvx Nfbolog Further questions gladly answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Lhjdpfx Adeklv H Islsg Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Ljdpfx Adsx Anipolehg Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: novo, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €107,870 Leasing rate: €2,038.74 Swing diameter over bed: 800 mm Centre distance: 2000 mm Centre height: 400 mm Spindle bore: 260 mm Swing diameter over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed: 8 – 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock quill taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6000 kg The primary application of this lathe type is tubular work. Accordingly, it is widely used in the oil industry. Pipe thread lathes offer extensive capabilities for machining threaded connections on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping the pipes with two chucks and the supplied steadies enables the machining of long pipes. Ljdpfx Aewirghsdlshg Ideal both for manufacturing components and systems for the oil and transmission industries as well as for servicing such systems. Drive via gear transmission Electrodynamic brake 3-axis Fagor DRO Quick-change toolpost, Amestra Type C system (like Multifix), including 4 holders (3 rectangular, 1 round) 2 pcs. 3-jaw Bison 3295 chucks, 500 mm diameter, mounted on both ends of the spindle, clamping range 120–350 mm (optional: special hard outer jaws with clamping range up to 500 mm) 2 pcs. steady rests on stands, 60–260 mm diameter with roller supports Rapid traverses (4) Longitudinal stop for single position Taper turning attachment Coolant system Full-length rear chip guard Lead screw and feed shaft cover Chuck guard Tool post guard Levelling screws and plates Tailstock Reducing sleeve for tailstock quill Mechanical tailstock movement by handwheel Low-voltage machine lamp Operating manual Equipment complies with CE standards Further models available on request with spindle bores from 5 to 358 mm, centre distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm.

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing over bed: 800 mm Centre distance: 2000 mm Centre height: 400 mm Spindle bore: 3 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 – 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock Morse taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,100 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine type is widely used in the petroleum industry. These pipe threading lathes offer extensive capabilities for machining threaded connections on cylindrical and conical internal and external surfaces of large diameter pipes. Clamping of pipes with two chucks and the included steadies allow for machining pipes of considerable length. Suitable both for manufacturing components and systems for the oil and transmission industry, as well as for maintenance of such facilities. • Drive via gearbox • Electrodynamic brake • 3-axis digital readout Fagor • Quick-change toolholder Amestra type C, system similar to Multifix incl. 4 holders (3 rectangular, 1 round) • 2 pcs. 3-jaw chucks Bison 3295, dia. 500 mm on both sides of the spindle • 2 pcs. steady rests on stands, dia. 120 – 320 mm with rollers • Rapid feeds (4) • Longitudinal stop for single position • Taper turning attachment • Coolant system • Full-length rear chip guard • Lead screw and feed shaft cover • Chuck guard • Toolholder guard • Levelling bolts and plates • Tailstock • Reducing sleeve for tailstock quill • Mechanical movement of tailstock with handwheel • Low-voltage machine lamp • Operating manual • Equipment as per "CE" Lodpowiq E Ajfx Adlshg Other models with spindle bores from 5 to 358 mm, centre distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm available on request.

Stanje: novo, Condition new Delivery time approx. 4 months from order Country of origin Bulgaria Price €131,720 Leasing rate €2,489.51 Swing over bed 1,020 mm Distance between centres 2,000 mm Centre height 510 mm Spindle bore 358 mm Swing over cross slide 770 mm Bed width 560 mm Spindle taper 361 M Number of spindle speeds 12 Spindle speed range 6.3 - 3 1/min Number of feeds 2 Longitudinal feed 0.039 - mm/rev Cross feed 0.02 - 7.5 mm/rev Number of threads 76 Metric thread range 0.5 - 0 mm Inch thread range 60 - 1/5 TPI Module thread range 0.125 - 37.5 DP thread range 240 - 4/5 Lsdpfx Ajwiq Dredlohg Cross slide travel 505 mm Top slide travel 270 mm Tailstock quill diameter 105 mm Tailstock taper 6 MT Tailstock quill stroke 225 mm Motor power 18.5 kW Weight 6,400 kg The primary purpose of this type of lathe is pipe machining. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes offer substantial capabilities for threading connections on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping pipes with double chucks and the provided pipe supports allow the machining of extra-long pipes. Suitable both for assembling components and systems for the oil and transmission industries, as well as for maintenance work on such plants. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra Type D1, Multifix-compatible system incl. 4 holders (3 rectangular, 1 round) 2 pcs. Bison 3295 3-jaw chucks, Ø 660 mm, mounted on both spindle sides max. 250 rpm, clamping range 5 - 400 mm (Option: special hard external jaws clamping range 80 - 400 mm) 2 pcs. steady rests on pedestals, Ø 160 - 360 mm, with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning device Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Tailstock Reducer sleeve for tailstock quill Mechanical tailstock movement with handwheel Low-voltage machine lamp Operating manual Equipment according to CE standards Other models with spindle bores from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm available on request.

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €82,740 Leasing rate: €1,563.79 Swing over bed: 860 mm Distance between centers: 3,000 mm Center height: 430 mm Spindle bore: 132 mm Swing over cross slide: 620 mm Bed width: 560 mm Spindle mount / DIN 55027: No. 11 Spindle taper: 140 M Number of spindle speed steps: 17 Lhjdpfx Ajwiq Rxedlog Spindle speed range: 7.5 – 1,015 rpm Number of feed rates: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread pitch range: 0.5 – 0 mm Inch thread pitch range: 60 – 1/6 TPI Module thread pitch range: DP thread pitch range: 240 – 2/3 Cross slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill travel: 225 mm Motor power: 15 kW Length: 3,470 mm Width: 1,700 mm Height: 1,730 mm Weight: 4,650 kg Drive via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra, system like Multifix incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3295/DIN6350 400 mm Fixed centre Rapid traverse (4 rates) Foot brake Longitudinal stop for one position Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock with quick clamping Reducing sleeve for tailstock quill Mechanical movement of the tailstock Low-voltage machine lamp Operating manual Equipment according to CE standard OTHER TURNING LENGTHS: Turning length 1,500 mm: €68,870.00 Turning length 2,000 mm: €71,780.00 Turning length 4,000 mm: €88,640.00 Turning length 5,000 mm: €101,200.00 Turning length 6,000 mm: €114,800.00

Stanje: novo, Bending length: 1050 mm Sheet thickness: 1 mm Upper roller diameter: 56 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the upper roller can be swung out to easily remove the material - Cone bending device - Manual adjustment of rear and lower rollers using handwheels Lhsdpfxjd Ab Uxs Adlsg - Portable control panel - In compliance with CE standards Options: - Motorized rear roller - Digital display to indicate the rear roller position - Body cover - Hardened rollers EURO 336, -- We have many references!

Stanje: novo, Dolžina upogibanja: 1050 Debelina pločevine: 1 Premer zgornjega valja: 56 Lodpfx Aded Ab Uyslshg Tehnični podatki: - Ohišje iz sive litine - Ročno ali motorizirano (opcijsko) upogibanje - Po upogibu se zgornji valj odpre na stran za enostavno odstranitev materiala - Naprava za stožčasto upogibanje - Premikanje zadnjega in spodnjega valja ročno z volanom navzgor in navzdol - Prenosna upravljalna konzola - V skladu s CE standardi Opcije: - Zadnji valj z motorjem - Digitalni prikaz položaja zadnjega valja - Pokrov ohišja - Kaljeni valji EURO 396, -- Imamo veliko referenc!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 0.8 mm Top roll diameter: 46 mm Technical data: - Cast iron body - Manual or motorized (optional) bending operation - Top roll can be opened sideways after bending for easy removal of the material - Cone bending device - Rear and lower roll adjustment up and down manually via handwheel - Portable control panel - Complies with CE standards Options: Lsdpfsd Ab U Aox Adlshg - Motorized rear roll - Digital display to indicate rear roll position - Body cover - Hardened rolls EURO 336, -- We have many references!

Stanje: novo, Condition: new Country of origin: Bulgaria Price: €77,840 Leasing rate: €1,471 Swing over bed: 760 mm Center distance: 3,000 mm Center height: 380 mm Spindle bore: 132 mm Swing over cross slide: 520 mm Bed width: 560 mm Spindle mount / DIN 55027: Size 11 Spindle taper: 140 M Number of spindle speeds: 17 Spindle speed range: 7.5 – 1015 rpm Number of feeds: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/6 TPI Module thread range: Cross slide travel: 410 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill stroke: 225 mm Motor power: 15 kW Weight: 4,470 kg Drive via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Rapid traverse (4) Foot brake Longitudinal stop for single position Coolant system Rear full-length chip guard Lead screw and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick-lock Reducing sleeve for tailstock quill Mechanical movement of the tailstock Low-voltage machine lamp Operating manual Equipment complies with “CE” FURTHER TURNING LENGTHS: Turning length 1,500 mm €63,970.00 Turning length 2,000 mm €66,880.00 Turning length 4,000 mm €83,740.00 Lhodswiq Rropfx Adlog Turning length 5,000 mm €96,300.00 Turning length 6,000 mm €109,900.00

Stanje: zelo dobro (rabljeno), Control switch Lsdpfxjf Ezbts Adljhg Manufacturer: DEMAG Type: DSE 10 C/CS Documentation available

Stanje: zelo dobro (rabljeno), Memmert Model: UFP 800 Standard Equipment Features - Electronic fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnostic system for quick fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, set temperature, air turbine, air flap, and error conditions with timestamp - Device control and logging of actual values to MEMoryCard XL - Program sequence controller for up to 40 ramp segments - Adjustable air turbine in recirculating air cabinets (adjustable in 10% increments) - Servo-motor controlled air flap (adjustable in 10% increments) for recirculating or fresh air operation Lhjdpfoymm Erex Adljg - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn control knob for easy operation - Visual alarm indicator - Built-in buzzer as alarm for limit violations, as acoustic signal for program end, and as input confirmation (key click) - Digital monitoring controller for over-temperature, under-temperature, and automatic set point tracking (ASF) - Mechanical temperature limiter (TB protection class 1) - Monitoring relay for heater shutdown in case of fault - Two separate PT100 temperature sensors DIN Class A, 4-wire design for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent control chamber and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-assisted temperature programs and for reading out the controller’s internal protocol memory Technical Data: - Interior: Made of rust-free stainless steel, highly stable and easy to clean due to deep-drawn ribbing. - Housing (outer body): Textured stainless steel; rear panel made of hot-dip galvanized steel sheet - UFP 800 mobile and lockable on wheels - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume approx. 749 liters - Weight approx. 170 kg - Power supply: 3N~ 400 V 50/60 Hz - Power consumption approx. 4800 W, 7A - Condition: Used - Scope of delivery: (see images) (Technical data and details are subject to change and error!) If you have further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for professional continuous operation. For sale is a professional climate test chamber by Weiss Technik, Model WK 5/55-120 from year 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range of 10–95% rH, the chamber covers a wide spectrum of applications. The spacious test volume of approx. 5 m³ also allows testing of larger components or assemblies. Technical Highlights: • Temperature range: -55°C to +120°C • Climate range: 10–95% relative humidity • Heating/cooling rate: approx. 1.5 K/min • Water cooling required Technical Data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume Test chamber volume: approx. 5 m³ External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm Lsdeymdc Iopfx Adlshg Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55°C to +120°C Heating/cooling rate: approx. 1.5 K/min Climate range: 10–95% rH Dew point range: +4°C to +85°C Electrical Data: Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: approx. 47 kW (depending on configuration) Nominal current: 71 A Customer-side protection: 63 A Cooling water: Water cooling required Maximum cooling water consumption: approx. 7 m³/h Inlet temperature: approx. 20°C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: • Weiss Technik climate test chamber WK 5/55-120 • Control panel • Operating manual (German) • Nameplate & documentation Condition: used Scope of supply: (See photo) (Specifications and technical details subject to change and errors excepted!)

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 26.04.21, Funkcionalnost: popolnoma funkcionalen, Fresan FP 10P - C Frame Eccentric Press - 10 Tonnes (100 kN) TECHNICAL DATA: * Capacity: 10 tonnes (100 kN) * Strokes per minute: 200 spm * Distance between table and slide: 190 mm * Stroke adjustment: 0 - 40 mm * Slide adjustment: 35 mm * Table dimensions: 265 x 370 mm STANDARD FEATURES: * Equipment in accordance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bearings, quality grade SnBz-12 * Pneumatic clutch-brake unit * Press safety valve * Safety PLC control & safety switches & light curtains (Pilz) * Four-point slide guiding * Mechanical overload protection (from 20 tonnes) * Pneumatic counterbalance cylinders (from 40 tonnes) * Manual central lubrication & used oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Automatic central lubrication * Adjustable stroke rate with AC inverter * HMI / touchscreen control panel Ledonvfmyjpfx Adlohg * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler, straightener, pneumatic or servo feeder) * Custom-built machine

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal chamber: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: -42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity spatial: ±0.5 to ±1.5 K Climatic Testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature uniformity spatial: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Halogen lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V±10% 50Hz Lsdpeygv U Njfx Adlshg Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: Approx. 515 kg For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VCS³ 7034-5 Vötsch climate test chamber, water-cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rates: Heating: 6.8 K/min Cooling: 6.7 K/min Lhedpfoygvn Nsx Adlsg Data for climatic test: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation at the center of the test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climatic range: 2°C / 95% r.h. regulated for max 2 hrs) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side port: 50 mm Side port: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10 %, 50 Hz Rated power: 9 kW Rated current: 20 A Required site fuse: 63 A slow-blow Refrigerants: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) If you have any further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VT³ 4150 Vötsch Temperature Test Chamber, Air-cooled Temperature Testing Temperature range: -40°C to +180°C Rate of change: Cooling approx. 2.5 K/min. Rate of change: Heating approx. 3.5 K/min. Layout plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Weight: approx. 1020 kg / 1540 liters Lhjdpfx Adsygux Tolsg Refrigerant: R 404A Important safety information for buyers! The following steps are carried out on all of our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: * Cooling: 6.7 K/min * Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climatic Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test Chamber Dimensions (W x D x H): 580 mm x 765 mm x 750 mm External Dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Ljdpfjygur Tox Adlshg Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important Information for Your Safety as a Buyer: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a temperature test chamber. Water-cooled Technical performance data: Temperature working range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerants: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your security as a buyer, please note the following information! The following actions are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilled with compliant refrigerant according to regulations Lhodpfxoyguprj Adlog 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see pictures) (Subject to modifications and errors in technical specifications and details!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber T-70/600 Water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test item control Shelving: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total max load for full shelf setup: 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refers to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without auxiliary equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Ledpfxeygults Adlshg Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, new filling with legally approved refrigerant 3. Leak test with certificate 4. After successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and information subject to confirmation!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water Cooled WK3-../0 Series with SIMPAC* Controller Test Chamber Volume: approx. 600 liters Test Chamber Dimensions: Height 950 mm x Width 800 mm x Depth 800 mm External Dimensions: Height 1995 mm x Width 1090 mm x Depth 1660 mm Operational Data: Test Chamber Lighting: LED 24 V, 6.8 W / Halogen lamp 2 x 24V, 50W Rated Voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Main Fuse (on-site): 16 A slow-blow Control Cabinet & Operator Panel Protection Class: IP 54 Max. Heat Dissipation to Ambient: 1200 W Sound Pressure Level: Approx. 46 dB(A) (measured at 1 m distance, 1.6 m height from front side) Data for Temperature Tests: Temperature Range: -5°C to +90°C Temporal Temperature Deviation at Center: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±1 K Temperature Gradient (to IEC 60068-3-5) Temperature Change Rate: Heating 0.6 K/min, Cooling 0.3 K/min Heat Compensation at +20°C to +50°C: 200 W Data for Climatic Tests: Temperature Range: +10°C to +90°C Dew Point Range: 4 to +89.5 °C Humidity Range: 10 to 98 % RH Temporal Temperature Deviation at Center: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1 K Temporal Humidity Deviation: +1 to +3 % RH Refrigerant: R-404A Weight: 610 kg Important Information for Buyers’ Safety! The following points are carried out on all chambers we offer: 1. Functional check and replacement of necessary components Lodpfx Aeygulmodlohg 2. New refill with legally compliant refrigerant 3. After a successful check, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications and technical details are subject to changes and errors!) For any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature test chamber with S!MCON / 32 controller, water-cooled Control unit: "Touchpanel" All control and operation commands can be initiated simply by touching the function symbols on the 'touchpanel' control unit. Leveling feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to ensure adequate ventilation of the machine components. Access ports The test chamber is equipped with access ports on the right and left sides. Through these, measuring cables and test devices can be routed into the test chamber. Standard access ports installed: R1: DN 125 mm L1: DN 50 mm (Refrigerant converted to R-452A) Test space volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable volume: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation: max. 2500 W Ledpfx Aoyguh Ijdlohg Operating data: Test chamber lighting: Halogen bulb, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (customer-provided): 16 A, slow-blow Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) If you have any questions, feel free to contact us by phone.

Stanje: rabljeno, prevoženi kilometri: 138.980 km, moč: 75 kW (101,97 KM), prva registracija: 10/2016, vrsta goriva: dizel, lastna masa: 1.699 kg, največja dovoljena obremenitev: 600 kg, skupna masa: 2.299 kg, medosna razdalja: 3.000 mm, barva: bela, vrsta prenosa: mehanski, število sedežev: 2, dolžina tovornega prostora: 2.060 mm, širina tovornega prostora: 1.320 mm, višina nakladalnega prostora: 1.090 mm, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), sistem za imobilizacijo, tempomat, Emission Class: Euro 6 Engine/Power: 1,968 cm³, turbocharged Ljdpfow H T Srex Adljhg Transmission: 5-speed manual Brakes/Safety: ASR (Anti-Slip Regulation) Design: Maxi version, right-hand sliding door Interior Equipment: Audio system, tinted windows, electric windows, electric exterior mirrors, outside temperature display Refrigeration Body: Deep-freeze Refrigeration Unit: Compressor/electric drive, cooling capability down to -20°C Other Features: Power steering ID: 118049 Engine + Electric Power Refrigeration unit cools down to -10°C Right-hand sliding door Driver airbag Electric exterior mirrors Heated exterior mirrors Smoker package (non-smoker) Electric windows ABS ASR (traction control) ESP (electronic stability program) Cruise control Wheelbase: 3,000 mm Euro 6 emission standard YouTube video link: We always have a wide selection of used refrigerated and deep-freeze vehicles in stock. Find more of our offers at: Non-binding offer, sale only to commercial customers, errors and prior sale excepted. Advertising and company logos on vehicles may have been digitally edited in the photos.

Stanje: rabljeno, Leto izdelave: 2016, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 5.700 mm, višina nakladalnega prostora: 1.750 mm, Refrigerated body: deep-freeze, 4 doors on the left, 4 doors on the right, 2 doors at the rear, folding and sliding partition wall. Refrigeration unit: Multi-Temp with 2 evaporators, compressor/power operation, cooling down to -33°C. ID: 117992. 4 units in stock. 3 temperature zones/compartments. Thermo King -0°C to -33°C. Year of manufacture: 2016. Plate cooling is a refrigeration system that uses eutectic plates to maintain the required temperature level. The passive plates are connected to the mains (380V) overnight. The freezing point of the eutectic solution is -33°C. The eutectic plates are designed to maintain the temperature of already frozen products. We always have a wide selection of used refrigerated and freezer vehicles in stock. See more of our offers at [website]. Non-binding offer, sales only to businesses, errors and prior sale excepted. Advertisements and company logos on vehicles in photos may have been digitally altered. Lodpsv S Ntfofx Adljhg