Centrirna stružnica
ZMM C 10 T.10

Stalna cena brez DDV

107.870 €

Stanje

Novo

Lokacija

Avstrija

Prikaži karto

Podatki o stroju

Opis stroja:: Centrirna stružnica

Proizvajalec:: ZMM

Model:: C 10 T.10

Stanje:: novo

Cena in lokacija

Stalna cena brez DDV

107.870 €

Lokacija:: 2351 Wiener Neudorf, Österreich

Klic

Prodaja strojev

Ste našli novo napravo? Zdaj staro pretvorite v denar. Dosežite najboljšo ceno prek Machineseeker.
Več o prodaji strojev

Podrobnosti ponudbe

ID ponudbe:: A19118246

Št. reference:: 1069-2351

Nazadnje posodobljeno:: dne 18.09.2025

Opis

Condition: New
Delivery time: approx. 4 months from order placement
Country of origin: Bulgaria
Price: €107,870
Leasing rate: €2,038.74
Swing diameter over bed: 800 mm
Centre distance: 2000 mm
Centre height: 400 mm
Spindle bore: 260 mm
Swing diameter over cross slide: 560 mm
Bed width: 560 mm
Spindle taper: 318 M
Number of spindle speeds: 12
Spindle speed: 8 – 400 rpm
Number of feeds: 2
Longitudinal feed: 0.039 – mm/rev
Cross feed: 0.02 – 7.5 mm/rev
Number of threads: 76
Metric thread range: 0.5 – 0 mm
Imperial thread range: 60 – 1/5 TPI
Module thread range: 0.125 – 37.5
DP thread range: 240 – 4/5
Cross slide travel: 410 mm
Top slide travel: 0 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MT
Tailstock quill travel: 225 mm
Motor power: 11 kW
Weight: 6000 kg

The primary application of this lathe type is tubular work. Accordingly, it is widely used in the oil industry.

Pipe thread lathes offer extensive capabilities for machining threaded connections on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping the pipes with two chucks and the supplied steadies enables the machining of long pipes.
Ideal both for manufacturing components and systems for the oil and transmission industries as well as for servicing such systems.

Drive via gear transmission
Electrodynamic brake
3-axis Fagor DRO
Quick-change toolpost, Amestra Type C system (like Multifix), including 4 holders (3 rectangular, 1 round)
2 pcs. 3-jaw Bison 3295 chucks, 500 mm diameter, mounted on both ends of the spindle, clamping range 120–350 mm (optional: special hard outer jaws with clamping range up to 500 mm)
2 pcs. steady rests on stands, 60–260 mm diameter with roller supports
Rapid traverses (4)
Longitudinal stop for single position
Taper turning attachment
Coolant system
Full-length rear chip guard
Lead screw and feed shaft cover
Chuck guard
Tool post guard
Levelling screws and plates
Tailstock
Reducing sleeve for tailstock quill
Mechanical tailstock movement by handwheel
Low-voltage machine lamp
Dkjdpfx Aswirghsg Nju
Operating manual
Equipment complies with CE standards

Further models available on request with spindle bores from 5 to 358 mm, centre distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2006

300 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+43 2236 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Stružnica-konvencionalno-elektronska ZMM C10T

Niederlangen

930 km

Stružnica-konvencionalno-elektronska
ZMMC10T

Klic

Stanje: novo, Swing diameter: 660 mm Turning length: 1,500 mm Swing over cross slide: 420 mm Swing over bed bridge: 850 mm Centre height: 330 mm Spindle speed(s): 15 steps (9 - 1,320 rpm) Djdpfx Agsrl U Nbs Njku Tailstock taper: MK6 Quill stroke: 225 mm Quill diameter: 105 mm Spindle bore: 103 mm Longitudinal feed: 0.039 - 18 m/min Cross feed: 0.02 - 9 m/min Total power requirement: 11 kW Machine weight approx.: 4,170 kg Space requirement approx.: 2,850 x 980 x 1,330 mm Equipment: - Coolant system - Machine lamp - Chip guard (rear panel) - Spindle guard - Chuck guard - Tool holder guard - Change gears *Special equipment: - 3-jaw chuck Ø 315 mm, Type 3204 / DIN6350, BISON - MULTIFIX quick-change toolpost Type C, incl. 4 tool holders - 3-axis digital readout DRO Newall - Foot pedal with braking function (CE)

Poglej podrobnosti

mali oglas

Avstrija

237 km

Centrirna stružnica
ZMMC 10 T.12

107.970 €

Stalna cena brez DDV

Klic

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing over bed: 800 mm Centre distance: 2000 mm Centre height: 400 mm Spindle bore: 3 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 – 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock Morse taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,100 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine type is widely used in the petroleum industry. These pipe threading lathes offer extensive capabilities for machining threaded connections on cylindrical and conical internal and external surfaces of large diameter pipes. Clamping of pipes with two chucks and the included steadies allow for machining pipes of considerable length. Suitable both for manufacturing components and systems for the oil and transmission industry, as well as for maintenance of such facilities. • Drive via gearbox • Electrodynamic brake • 3-axis digital readout Fagor • Quick-change toolholder Amestra type C, system similar to Multifix incl. 4 holders (3 rectangular, 1 round) • 2 pcs. 3-jaw chucks Bison 3295, dia. 500 mm on both sides of the spindle • 2 pcs. steady rests on stands, dia. 120 – 320 mm with rollers • Rapid feeds (4) • Longitudinal stop for single position • Taper turning attachment • Coolant system • Full-length rear chip guard • Lead screw and feed shaft cover • Chuck guard • Toolholder guard • Levelling bolts and plates • Tailstock Djdswiq E Aepfx Ag Noku • Reducing sleeve for tailstock quill • Mechanical movement of tailstock with handwheel • Low-voltage machine lamp • Operating manual • Equipment as per "CE" Other models with spindle bores from 5 to 358 mm, centre distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm available on request.

Poglej podrobnosti

mali oglas

Avstrija

237 km

Centrirna stružnica
ZMMC 10 T.14

131.720 €

Stalna cena brez DDV

Klic

Stanje: novo, Condition new Delivery time approx. 4 months from order Country of origin Bulgaria Price €131,720 Leasing rate €2,489.51 Swing over bed 1,020 mm Distance between centres 2,000 mm Centre height 510 mm Spindle bore 358 mm Swing over cross slide 770 mm Bed width 560 mm Spindle taper 361 M Number of spindle speeds 12 Spindle speed range 6.3 - 3 1/min Number of feeds 2 Longitudinal feed 0.039 - mm/rev Cross feed 0.02 - 7.5 mm/rev Number of threads 76 Metric thread range 0.5 - 0 mm Inch thread range 60 - 1/5 TPI Module thread range 0.125 - 37.5 DP thread range 240 - 4/5 Cross slide travel 505 mm Top slide travel 270 mm Tailstock quill diameter 105 mm Tailstock taper 6 MT Tailstock quill stroke 225 mm Motor power 18.5 kW Weight 6,400 kg Dodpfjwiq Drex Ag Nsku The primary purpose of this type of lathe is pipe machining. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes offer substantial capabilities for threading connections on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping pipes with double chucks and the provided pipe supports allow the machining of extra-long pipes. Suitable both for assembling components and systems for the oil and transmission industries, as well as for maintenance work on such plants. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra Type D1, Multifix-compatible system incl. 4 holders (3 rectangular, 1 round) 2 pcs. Bison 3295 3-jaw chucks, Ø 660 mm, mounted on both spindle sides max. 250 rpm, clamping range 5 - 400 mm (Option: special hard external jaws clamping range 80 - 400 mm) 2 pcs. steady rests on pedestals, Ø 160 - 360 mm, with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning device Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Tailstock Reducer sleeve for tailstock quill Mechanical tailstock movement with handwheel Low-voltage machine lamp Operating manual Equipment according to CE standards Other models with spindle bores from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm available on request.

Poglej podrobnosti

Oglašujte tukaj