Vtičnica Gredi Zobnik Vtičnica Za Šasijo Žerjava nakup rabljenega (90.250)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm Nwjdst Hw D Repfx Altji max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: Nodpfet Hw Hxsx Altjwi • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Njdpfot Hw R Djx Altewi Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1980, Wheel diameter – max. 1010 mm Wheel width: 0 mm Module – max.: Module – min.: Total power requirement: 15 kW Machine weight approx. 9.5 t Space requirement approx.: G L E A S O N (USA) "CURVIC-Coupling" Grinding Machine Model 120 (888), Year of manufacture 1980, Serial No. 763402 Max. tooth height: 10 mm Max. workpiece swing diameter: 1,010 mm Max. external diameter of CURVIC gearing: 610 mm Retraction of workpiece slide plate: 216 mm Max. distance grinding wheel to workpiece nose: 90–430 mm Max. workpiece weight incl. clamping device: approx. 500 kg Number of teeth: 32–150 Grinding wheel diameter: approx. 152–320 mm Grinding wheel speeds, infinitely variable: 0–3,600 rpm Workpiece spindle bore: 60 mm Total drive approx. 15 kW – 380 V – 50 Hz Weight approx. 9,500 kg Accessories / Special equipment: Automatic rough grinding and finish grinding with presettable counters and built-in feed curves Counter for number of teeth Counter for number of dressing cycles Nwodpst Hwnisfx Altoi 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and tip dressing of the grinding wheel Mounted index plate for 48 teeth Stand-alone coolant unit with belt filter, separate hydraulic unit Stand-alone oil mist extraction unit make TRION, various small parts

Stanje: rabljeno, Leto izdelave: 1975, Wheel diameter – max. 160 - 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space required approx. ... m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Helix Testing, Type PFSU 1600 Year of manufacture 1975, modernised in 1995 #B 2281 Working range: min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Maximum face width: 250 mm Measuring carriage stroke approx.: 300 mm Maximum helix angle: 0 – 90° Maximum centre distance in between centers: approx. 1,150 mm Overhang of the tailstock: 450 mm Chart recorder magnification: 50/250/500/1000 x Maximum test gear weight: approx. 4,000 kg Weight: approx. 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz / Suitable for testing: - Tooth profile (involute) - Tooth direction (helix angle/lead) on internal and external gears, hobs, shaper cutters, worm gears, etc. - Tooth runout, surface roughness Nwodpfx Ajt Hwptsltei - Determination/reconstruction of the base circle and helix angle, etc. Accessories / special equipment: - Optical base circle setting and optical angle setting (no longer using base-circle discs) - High workpiece weight possible due to specific construction, testing sequence motorised or manual via handwheels - Rotatable mounting turntable Ø 480 mm for mounting larger gear blanks, with 2 sets of different extension supports (400 and 470 mm long) for max. gear diameter of 1,600 mm - Counterholder AV 17 for max. workpiece length of 1,150 mm - Separate electrical cabinet for control of manual movements as well as - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German, program update to current version V 21.17, ideal for generating modern test reports with graphics, graphical display on monitor, other subprograms, HP printer, flat screen - Various probe inserts, small parts, height-adjustable mount for a pitch measurement device (rear mounted), leveling feet, etc. - However, pitch measurement device not included. Mounting fixture available and installed at rear. Condition: Very good – ready for demonstration, dismantled and reassembled by specialist.

Stanje: rabljeno, Leto izdelave: 1997, Wheel diameter – max. 215 mm Wheel width – 40.65 mm Module – max. Total power requirement – 20 kW Njdpst Hwxhsfx Altswi Machine weight – approx. 10 t G L E A S O N (USA) CNC grinding machine for spiral and hypoid bevel gears Model: PHOENIX HG 200 Year of manufacture: 1997 Maximum outside diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth range: 5 – 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51–190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (base plate): 304 mm Distance from machine center to workpiece spindle face: 115 mm Axis traverse speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32 inch Total drive: approx. 20 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special features: • FANUC 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, high-spec coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after each dressing cycle • Gear grinding can be performed either as a single-part process with conical cup wheel (Gleason 30°) or using a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional 'dressable' aluminum oxide wheels (cost-based choice). Grinding with a conical wheel offers advantages regarding heat generation and contact pattern quality. Thus, these bevel gear pairs (automotive industry) can be produced in high quality, with consistent accuracy, cost-effectively and with short setup times. For further details, see brochure copy on our website. Condition: very good – under power and ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. Further gear machining equipment in stock at all times.

Stanje: rabljeno, Leto izdelave: 1983, Workpiece diameter: 250 mm Nwedpst Hwzpsfx Altsi Center distance: 0 mm Max. honing length: --- mm Max. module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Type D - 250, Year of manufacture: 1983, Serial No. 31 205.049.22 _____ Wheel diameter: 10 - 250 mm Module: 1 - 5 Gear length/Table stroke max.: 500 mm Center height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross-slide travel: 270 mm Rapid traverse cross-slide travel: 50 mm Cross-slide feed, mechanical: 1 - 8 mm/Ø Roughing/finishing feed rates: 1-29 / 0.2-2.8 μ/sec Table speed, hydraulic: 0 - 6 m/min Total power: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-selectable machining parameters via counters and switching units for automatic operation, with workpiece counter. - All roughing and finishing feeds via decade switches, as well as potentiometer-adjustable table reverse times and rapid feeds adjustable by time (1 s = 0.04 mm), ampere display, etc. - Capability for barrel and taper honing using templates (also off-center, requires pre-machined workpiece). - Separate honing oil system with magnetic separator and fine filter. - Mechanical tailstocks for manual loading, oil mist separator, sliding doors with foot switch, separately housed hydraulic unit.

Stanje: rabljeno, Leto izdelave: 1980, Wheel diameter - max. 400 mm Wheel width: NA mm Module - max. 5 Nwjdot Hw Ebjpfx Altoi Module - min. Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Manual double-flank gear rolling tester

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Njdpfx Aot Hwxbeltewi Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: rabljeno, Leto izdelave: 1993, Wheel diameter – max. 330 mm Wheel width 180 mm Total power requirement: 12 kW Machine weight approx. 7,500 kg Nwsdst Hwyfopfx Altoi REISHAUER (Switzerland) CNC Gear Grinding Machine Model: RZ 301 AS* (*A = automatic threading) Year: 1993 # 71206 _____ Wheel diameter min./max.: 10 – 330 mm Module: 0.5 – 7 Helix angle: +/- 45° Slide stroke: 180 mm Max. number of teeth: 10 – 600 Workpiece clamping length: 420 to max. 620 mm Max. workpiece weight: 60 kg Grinding worm – width: 3 x 50 x 84 – 104 mm Grinding worm speed: 1,100 – 1,900 rpm Spindle drive: 4 kW – Total drive approx. 12 kW – 380 V – 50 Hz Total weight: approx. 7,500 kg Accessories / Special features A modern CNC control allows input of all relevant gearing data and dialog-assisted setup of the workpiece. Programming language switchable (German/English), and DNC interface for data import/export. The machine operates in continuous generating grinding mode with automatic grinding cycles and in-machine automatic dressing of the grinding wheel. Equipped with an automatic thread-in device for inserting the grinding wheel into the tooth gap – provides significant time savings, hydraulically swiveling. About 10 years ago, BURRI retrofitted the profiling axis (V-axis) electronically, resulting in higher accuracy, simpler profile correction, faster dressing. Currently, a REISHAUER dressing unit Type SP-DR with a profile diamond disk is installed. The workpiece swivel axis (A-axis) is also electronically controlled for fast, precise positioning and hydraulically clamped, allowing for quicker changeover and easier part loading. Thanks to the shift grinding feature, the workpiece is tangentially guided along the grinding wheel during machining, ensuring a consistently uniform grinding wheel profile is in mesh. DITTEL grinding wheel balancing unit Hydraulic workpiece clamping with external collet and tailstock in the workpiece carriage Complete working area enclosure with sliding doors and oil mist extraction No original coolant system included (central supply), but a separate grinding oil centrifuge is available Separate electrical and control cabinet, separate hydraulic unit in cabin, grinding wheel flanges

Stanje: rabljeno, Leto izdelave: 1967, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150:10486, premer zobnika: 150 mm, skupna višina: 1.400 mm, skupna širina: 800 mm, premer obdelovanca (maks.): 150 mm, največja hitrost vretena: 1.000 obr/min, hitrost vretena (min.): 112 obr/min, skupna masa: 1.300 kg, premer orodja: 50 mm, Na prodaj je preverjen stroj za rezkanje zobnikov Koepfer 150. Stroj je idealen za gospodarno izdelavo cilindričnih zobnikov, zobčnih koleščkov in drugih zobničenj tako v posamezni kot v serijski proizvodnji. Nodpfx Aezfhyyjltowi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, In stock Capacity – 500 l. Self-propelled. Nsdpod Swd Uofx Altswi Diesel burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating of the mastic via thermal oil (thermal oil jacket).

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC-obdelovalni stroj za zobnike / CNC-stroj za izdelavo zobnikov z valjanjem Nadzorni sistem: Siemens 840 D Power Line Tehnični podatki: Največji premer obdelovanca: 150 mm Premer mize: 145 mm Največja hitrost vrtenja mize: 800 vrt/min Razdalja med osmi / med centri: 10 – 200 mm Največji axialni hod: 250 mm Kot nagiba glave za rezanje: +/- 45° Največji hod vodila: 300 mm Največja hitrost hitrega premika: 17.000 mm/min Nwodpfezkwvnjx Altei Moč pogona glave za rezanje: 19 kW Največji modul: 3 mm Največja hitrost vrtenja vretena za rezanje / hitrost vrtenja orodja: 4.500 vrt/min Največji premer orodja za valjanje: 80 mm Največja dolžina orodja za valjanje: 200 mm Približne mere: 5,5 x 3,7 x 3,1 m Približna teža: 9.500 kg Oprema: Transportni sistem za odrezke Sesalni sistem za oljne pare / sesalni sistem za olje Hladilnik olja Podpirač z mehanizmom za spuščanje in navpično nastavitev Rotacijski podajalnik z dvema ročnima prijemaloma za obdelovance Sistem transportnega traku za samodejno podajanje 5 kosov vpenjal za rezalnike / vpenjal za orodja za valjanje: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Drugo: Video posnetki preko WhatsApp

Stanje: dober (rabljeno), Modul – maks. 2 Dolžina rezkalnika: 135 mm Skupna potrebna moč: 2,2 kW Nwsdpfjzkvuvsx Altei Masa stroja: pribl. 1420 kg Potreben prostor: pribl. 2,00 x 1,60 x 1,43 m --> Tehnični podatki: največji premer rezkalnika: Ø 150 mm --> največja dolžina rezkalnika: 135 mm --> največji modul: 2 --> premer vretena: Ø 24 mm --> vpenjalna priprava vretena: MK-4 --> hitrosti vretena: 140 – 1120 vrt/min. --> avtomatski pomiki Oprema in dodatna oprema: sistem za hlajenje, rezkalniki, zamenljiva kolesa, navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107253, Prosimo, sporočite nam vašo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. Cena brez embalaže; pogoj dostave: FCA (lokacija stroja). ===== Tehnične podatke si oglejte v priloženi brošuri. Izključeno je vsakršno jamstvo. Ne prevzemamo odgovornosti za pravilnost tehničnih podatkov in letnika izdelave, za popolnost dodatne opreme in orodja, ter za upoštevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih o preprečevanju nesreč. Prodaja samo podjetjem, ne posameznikom. Prodaja samo znotraj Evrope, vključno s Turčijo. Cena brez embalaže; pogoj dostave: FCA (lokacija stroja). Njdpfx Alszlrfyotswi ===== Tehnične podatke si oglejte v priloženi brošuri. Nemški jezik je vodilni jezik. Brez jamstva in garancije, vključno s popolnostjo orodij in dodatne opreme ter okoljskimi in varnostnimi predpisi. Prodaja ni dovoljena posameznikom.

Leto izdelave: 1991, stanje: dober (rabljeno), Št. reference: 10656 Proizvajalec: PFAUTER Tip: PE 150 Letnik izdelave: 1991 Vrsta upravljanja: CNC Krmilnik: Sinumerik 840 Lokacija: Halberstadt Nwjdpjzkpx Ujfx Altoi Država izvora: Nemčija Število vrtljajev: 150 - 600 vrt/min Vpenjalna glava za orodje: SK 40 Dolžina stroja: 4700 mm Širina stroja: 3600 mm Višina stroja: 2800 mm Teža: 8 t Premer obdelovanca: 150 mm Maksimalna širina zobca: 150 - 200 mm Premer mize: 160 mm Premer luknje v mizi: 63 mm Maksimalni premer rezkala: 130 mm Maksimalna dolžina rezkala: 220 mm Kot nagiba: +/- 45° Dodatne informacije: - Stroj je bil v celoti predelan na sistem Siemens 840D, kar pomeni nove motorje in električno omarico. - Rezkalna glava je bila leta 2013 generalno popravljena pri podjetju Pfauter. - Razpoložljiva je nizkonapetostna naprava in trak za magazine. - Opremljen je z enoto za odstranjevanje ostrih robov. Stroj si je mogoče ogledati v delujočem stanju po dogovoru.

Stanje: rabljeno, Tehnične podrobnosti: Z-hod: 1250 mm Premer vrtenja nad ležiščem: 260 mm Premer obdelovanca nad ležiščem: 500 mm Premer obdelovanca nad suportom: 250 mm Višina konice nad ležiščem: 260 mm Dolžina rezkanja: 2000 mm Maks. modul: 8 / 12 Skupna potrebna moč: 9,5 kW Približna teža stroja: 3,8 t Nodpjv U Un Hefx Altjwi

Stanje: rabljeno, Leto izdelave: 2009, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Opis: Splošno: Leto izdelave: 2009 Krmiljenje: Siemens 840 D Zunanji premer zobljenja: 1.200 mm Notranji premer zobljenja: 1.200 mm Največja širina zobljenja: 260 mm Največji premer obdelovanca: 1.500 mm Stojalo stroja: Pomik: 600 mm Stranski pomik: +/- 60 mm Rezkalna glava: Premer rezkalne vretene: 125 mm Vpenjanje orodij: SK 45 Razdalja med rezkalno vreteno in mizo: 0–820 mm Dolžina hoda: 270 mm Nwsdezdxi Nepfx Altji Največji modul: 16 mm Največji premer orodja: 300 mm Največje število obratov rezkalnega kolesa: 25 obr/min Miza: Premer mize: 900 mm Vrtina v mizi: 320 mm Globina vrtine: 520 mm Največje število obratov mize: 12 obr/min Največja obremenitev mize: 95 kN Oprema / dodatki: Odstranitev ostružkov: 2x magnetni tračni transporter Sistem za dovod hladilne tekočine: rezalno oljna postaja s filtrom in temperiranjem Ročni način nastavljanja: elektronsko ročno kolo

Stanje: dober (rabljeno), Teža stroja cca 5,5 t Premer vrha mize: 35 mm Višina vrha nad mizo: 75 mm Premer konice nasprotne konice: 50 mm Hod nasprotne konice: 40 mm Minimalna razdalja med konicama: 20 mm Minimalna merilna višina nad mizo: 50 mm Največja merilna višina nad mizo: 550 mm Premer mize: 260 mm Osnovni premer kroga: 0 - 630 mm Nwodpfezidz Usx Altei Največja valjna pot: +- 115 mm Največja masa obdelovanca: 300 kg X-os: 230 mm Y-os: 370 mm Z-os: 500 mm Največji premer obdelovanca: 630 mm Programska oprema na novem PC WIN11 Programska oprema za stožčasta zobata kolesa po želji, samo na namestitvi Metrotek Dodatne informacije: - Stroj je bil kalibriran po DAKKS dne 19.11.2017

Stanje: dober (rabljeno), Leto izdelave: 1992, Teža 5,5 t Premer vrha mize 35 mm Višina vrha nad mizo 75 mm Premer vrha nasprotne konice 50 mm Hod nasprotne konice 40 mm Minimalna razdalja med vrlama 20 mm Minimalna merilna višina nad mizo 50 mm Maksimalna merilna višina nad mizo 800 mm Premer mize 500 mm Premer osnovnega kroga 0 - 1000 mm Maks. hod valjenja ±115 mm Maks. masa obdelovanca 2000 kg X-os 230 mm Y-os 530 mm Z-os 750 mm Maks. premer obdelovanca 1000 mm Programsko opremo pri novem PC WIN11 Program za stožčasta zobnika na željo samo pri instalaciji Metrotek Dodatne informacije: - Stroj kalibriran po DAKKS dne 19.11.2017 Nwedpfjzidz Isx Altji

Stanje: rabljeno, TEHNIČNI PODATKI - Maks. premer obdelovanca: 80 [mm] - Z-pomik: 220 [mm] - Maks. modul: 2,5 - Maks. hitrost vretena nosilca obdelovanca: 3000 [vrt/min] Nedpoyuzggofx Altjwi - Maks. dimenzije valjčne rezkalke (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkalke: 200-5000 [vrt/min] - Preklopni hod: 140 [mm] - Kotni pomiki rezkalne glave: -45/+115 [stopinj] - Potreben prostor: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmiljenje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, TEHNIČNI PODATKI - Največji premer obdelovanca: 80 [mm] - Z-premik: 220 [mm] - Največji modul: 2,5 - Največja hitrost vretena nosilca obdelovanca: 3000 [obr/min] - Največje dimenzije valjčne rezkarice (premer × dolžina): 118 × 120 [mm] Nwedpfjyuzgajx Altoi - Hitrost vretena rezkarja: 200–5000 [obr/min] - Premik za preklop: 140 [mm] - Kotni premiki rezkalne glave: -45/+115 [stopinj] - Potrebna površina: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmilje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The Gleason-Welter 2000 T bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for single-flank rolling tests of bevel gears and crown gears. Technical Data - Diameter: 2000 mm - Spindle bore: 310/250 mm - Test speed: 5-100 rpm - Dimensions: approx. 4,200 x 4,500 x 2,300 mm - Machine weight: approx. 12,500 kg *Specifications and data are non-binding. Subject to prior sale. Special Features: Angular hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with diameters up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as spur, helical, and internal gears. Deviations in gear geometry, machining errors due to defective tools, and damage to the gearing can thus be detected and eliminated even before assembly. Njdpjwn D Uhsfx Altjwi The following parameters can be measured: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis If you have any technical questions or require further information, you can contact us at any time.

Stanje: zelo dobro (rabljeno), Merilno območje do: 1000 mm Merilna natančnost: 1 µm Skupna višina: 1400 mm Potreba po prostoru: 330 x 300 mm Teža ca.: 30 kg Nsdpfx Alezibt Ietjwi

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Nwsdpfxsvz Ec Ij Altsi Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Dra8M7 - Documentation