Sistem Za Preizkus Udarca Ob Padcu nakup rabljenega (87.375)

Stanje: novo, Leto izdelave: 2026, Odprta industrijska kabina, zasnovana za učinkovito odsesavanje in prezračevanje zraka v profesionalnih in industrijskih okoljih. Enota ima skupne dimenzije 1269 × 1367 × 2379 mm in je opremljena z elektromotorjem z močjo 1,1 kW pri 2800 vrt/min. Gibanje zraka zagotavlja rotor s premerom Ø315 mm in zračno zmogljivostjo 2600 m³/h. Kabina je zasnovana za zanesljivo neprekinjeno delovanje, zagotavlja stabilen pretok zraka in učinkovito odsesavanje, zato je primerna za industrijske aplikacije, kjer je potrebna nadzorovana ventilacija in obravnava zraka. Lajdeyghnnepfx Anfeb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Laodpfx Ansxqxw Tefjb Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Laedsxqxt Iepfx Anfob Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kolb RB5D Stencil Cleaning System Operating hours: 1,781 h Stencil frame size: max. 750 x 585 mm Power: 1.7 kW, Connection: 230V Cleaning chamber capacity: 75 l Dimensions: 185 cm x 100 cm Weight: approx. 240 kg Lajdpfsqn U Hgox Anfob Shipping is possible by arrangement The machine is fully operational and ready for use. Please refer to the photos for the cosmetic condition and further details. The emergency stop key is no longer available. Options included: Operator platform made of VA aluminium Options included: Wash cycle counter and operating hours display #7891

Leto izdelave: 2013, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7.50.1081, Schneider & Koch AOI TS-LV6 / LaserVision Twin LV6 Avtomatiziran optični nadzorni sistem (rabljen 2D/3D-AOI za SMT tiskana vezja, popolnoma delujoč, letnik cca 2014–2016, za natančen pregled komponent, spajkalnih spojev in paste) Preizkusna tehnika Schneider & Koch Model: TS-LV6 Ljdjyid Duopfx Anfsab AOI naprava Funkcionalna

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 vložki za Multifix, velikost C, Lsdpfsy Hf Awex Anfsab

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Système de traitement d'image comprenant une caméra monochrome 5 millions de pixels (numéro de modèle CA-H500M) et un contrôleur de traitement d'image (numéro de modèle XG-X1500). Le set comprend des câbles et un éclairage de fond blanc (numéro de modèle CA-DSW30). Type : Caméra*1 Élément de capture d'image : capteur CCD monochrome 2/3", capture haute vitesse 11x avec pixels carrés, 5 050 000 pixels Taille des cellules : 3,45 x 3,45 µm Nombre de pixels actifs : 4 990 000 pixels 2432 (H) x 2050 (V) Lsdomza Ilepfx Anfjab Vitesse de transfert des pixels : 130 MHz (65 MHz x 2 canaux) Système de balayage : mode plein cadre (61,2 ms), mode entrelacé (40,3 ms) Système de transmission : transmission série numérique Obturateur électronique : 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, de 0,05 ms à 9000 ms réglable en valeur numérique. Monture d'objectif : monture C

Stanje: novo, Leto izdelave: 2025, The high-speed mixers of the SPT-SHM Series are designed for mixing dry powders for tablets and capsules, and can also be used for wet granulation (pre-processing stage for tablet and capsule powders). All product-contact parts are made of SS 316L stainless steel. Other parts are made of SS 304. The machines comply with GMP guidelines and are CE certified. Ljdpfx Ajh Im D Tenfjab The performance of the machine depends on the product.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna masa: 10.000 kg, skupna dolžina: 11.600 mm, skupna širina: 2.560 mm, skupna višina: 600 mm, vhodna napetost: 220 V, vrsta vhodnega toka: trifazni, vhodna frekvenca: 60 Hz, TM-M60 Frame Straightening Bench for TIR Trucks and Large Commercial Vehicles This is a professional device designed for comprehensive straightening and repair of various body and chassis elements in trucks, delivery vehicles, and cars. With a robust construction and equipped with 6 towers, each offering a high pulling force of 25 tons, this frame allows for the efficient execution of advanced repairs such as restoring the shape of damaged components, straightening deformations, and eliminating distortions. The high load capacity and precise tools make our straightening bench an ideal solution for professional workshops, ensuring speed, accuracy, and reliability when repairing large vehicles. Specifications: Ledpfx Aevuxygjnfsab - Hydraulic pressure: 70 MPa (10000 psi) - Pneumatic pressure: 0.8 MPa - Maximum column pulling force: 25 tons (245 kN) - Load capacity: 50000 kg - Full column operating range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: 1. Equipped with 6 towers, each with a maximum pulling force of 25 tons. 2. Complete set of push and pull tools, suitable for all types of straightening tasks. 3. 50-ton lifting device, effective for repairing distorted beams. 4. Hydraulic arm with 25-ton force for repairing deformations, bulges, twists, etc. 5. Four towers have a height of 2500 mm; the other two measure 4320 mm. 6. Choice of color from the RAL palette. 7. Customer can select the number of towers as required.

Stanje: dober (rabljeno), Leto izdelave: 1994, Ogrevalna naprava za toplo vodo ali paro Ogrevalna moč: 6 MW Gorivo: lesni sekanci z oljnim gorilnikom kot rezervno ogrevanje Lsdpfx Ansyizqnefeab Demontažo mora opraviti kupec.

Stanje: dober (rabljeno), Leto izdelave: 2010, Naprava za uplinjanje lesa za proizvodnjo električne energije, cca 50 kW. Vgrajena v 20-nožni kontejner. Zaloga rezervoarja cca 3,5 m dolžine. Dovod materiala preko dvižnega verižnega transporterja. Plinski motor ni vključen, ga pa je možno zagotoviti rabljenega ali novega. Laedpfx Aoyxv Emenfjb

Stanje: dober (rabljeno), Leto izdelave: 1991, Shaker with triangular special stones Laodpfxon I Rqcj Anfjb

Stanje: rabljeno, Leto izdelave: 2021, vhodna napetost: 400 V, vhodni tok: 9 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna masa: 3.500 kg, Ponujamo rabljeni Tantec PLX XYZ sistem za predobdelavo površin pred tiskom, letnik 2021. Tip: PLX XYZ Letnik: 2021 Serijska številka: 41805 Krmilna napetost: 24 VDC Napetost: 400/230 V 3f+N+PE Tok: 9,5 A Frekvenca: 50 Hz Moč: 6,5 kW Teža: 3500 kg Lajdpfxey Am D Ij Anfjb Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas kontaktirajte po telefonu.

Stanje: dober (rabljeno), Leto izdelave: 1992, Fully automatic programmable cross-cutting with additional mark detection for defect removal via LUT system Infeed conveyor 6 m Lajdpfx Aol H E Taenfeb 6 discharge stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency inverter issue.

Stanje: zelo dobro (rabljeno), Popolna linija za proizvodnjo palačink, crepesov in blinov. Sistem krožne vroče plošče. V odličnem stanju. Lodpex Hailjfx Anfjab

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.400 mm, skupna širina: 600 mm, skupna višina: 1.400 mm, trajanje garancije: 18 meseci, skupna masa: 500 kg, vhodna napetost: 400 V, moč: 3 kW (4,08 KM), priključek za stisnjen zrak: 8 letvica, zračni tlak: 7 letvica, Oprema: dokumentacija / priročnik, SAS200 – Avtomatski sistem za oblikovanje i sečenje snack proizvoda bez omotača Industrijsko rešenje za proizvodnju snack proizvoda kao što su mini salame, kabanosi, jerky trake, riblji ili pet snack – potpuno bez omotača. Kompatibilan sa Handtmann, REX, Vemag ili našim sopstvenim zupčastim vakuum punjačem. Glavne karakteristike: • Kapacitet: do 200 kg/h • Kalupi za oblikovanje: cilindrični (Ø8–20 mm) i ravni (25×5 mm do 200×5 mm) • CE sertifikat • Izrada od nerđajućeg čelika u skladu sa higijenskim standardima • Pneumatska giljotina sa automatskim čišćenjem • Deo za rasterećenje za ravnomeran protok proizvoda Lsdpjp S Nv Iofx Anfoab • Upravljački panel sa 10,1” TFT touchscreenom (Delta) • Opcionalno sa kolica za sušenje (60 tacni, 30 nivoa) Kompatibilan sa: ✅ Handtmann, REX, Vemag ✅ Takođe sa našim sopstvenim vakuum punjačem (200 L) Moguća demonstracija uživo u: • 🇬🇧 Ašford, Velika Britanija – Windsor Food Machinery • 🇵🇱 Krakov, Poljska – REGIS Showroom

Stanje: rabljeno, lahko se uporablja za paniranje ali pomokanje (samo suhi premazi) idealno za nepravilne oblike v celoti iz nerjavečega jekla brezstopenjska regulacija hitrosti premično Laodpfey Nx Huex Anfob izhodni trak širina traku 400 mm zunanje dimenzije (D x Š x V): pribl. 3.000 x 1.600 x 1.900 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic powder coating booth – year of manufacture: 2000 Serial number: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 pieces with rotary system Operating mode: through-feed Workpiece entrance dimensions: 100 x 158 cm 2. IMEL washer, external dimensions: 3 x 12 x 4.2 m (L-shaped) – Washer entrance size: 72 x 144 cm – Water tank: 3 x 2.2 x 1.2 m – Capacity approx. 6000 liters (located beneath the washer) – Water heating via Sant Andrea burner, model KB 40 GM with power modulation in the range of 179–468 kW (gas burner) 3. WAGNER powder filtering system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 meters, with dedicated drive 5. WAGNER powder recovery unit with cyclone separator 6. Oven (double-circuit) with gas burner 163–390 kW Lajdsyrr Rqjpfx Anfeb One circuit for drying parts after washing; the other (longer) circuit for curing powder coating after spraying. Oven dimensions: 12 x 7 x 5.3 m, maximum workpiece size: 60 x 120 cm Additionally, we have 2 oil burners with comparable capacity as an alternative to gas burners. The total installed area is approximately 30 x 11 m.

Leto izdelave: 2009, stanje: rabljeno, Aluminium saw system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, discharge table, chip conveyor, and extraction system included Lajdpfoqzmnujx Anfob Soundproof enclosure Controlled via Siemens S7 panel Operating manual and other documentation available; further technical data upon request The machine was operational until disassembly For further technical data, please inquire or refer to the photos

Stanje: dober (rabljeno), skupna masa: 160 kg, The BookMaster brochure maker and the TrimMaster trimmer combine maximum performance with cost efficiency. They are easy to operate and require minimal maintenance, making them by far the most advanced, user-friendly, and reliable saddle-stitch brochure machines on the market. The BookMaster features a unique stapling mechanism that ensures virtually maintenance-free operation. The main wear parts are contained within the stapler cassette and are replaced every 5,000 cycles when the cassette is changed. This allows for over one million cycles before any maintenance of the stapling head is required. The BookMaster comes with manual adjustment for page margins, end offset, and stapling/folding position. The TrimMaster trimmer is equipped with a single, self-sharpening blade made of hardened steel for precise trimming of the book’s front edge. All trimmings are transported outside the machine into an external waste container, enabling continuous operation. Finished brochures are conveyed onto a high-performance outfeed belt. Additional information: - Max sheet size: 482 x 320 mm - Min sheet size: 210 x 140 mm - Max brochure thickness: 22 sheets - Max trim length: 25 mm Lasdpfsy Idr Hsx Anfob - 230 Volt Shipping available, collection possible, test run possible. Operating manual included.

Stanje: zelo dobro (rabljeno), Naprodaj je natančen merilni instrument UNIVERSAL CONCENTRICITY GAGE, proizveden v ZDA, namenjen merjenju soosnosti, udarjanja, ravnosti in pregledu vrtljivih elementov. Komplet vsebuje indikator z urnim številčnikom Blankenhorn 0,01 mm ali Käfer 0,01 mm (izdelano v Nemčiji). Stabilno podnožje, natančna vodila in držalo z mikrometrično nastavitvijo. Tehnično stanje zelo dobro – oprema je popolnoma funkcionalna, iz nemškega oddelka za nadzor kakovosti. Tehnični podatki: • Proizvajalec: Universal Gage Co., ZDA • Model: Universal Concentricity Gage • Natančnost: 0,01 mm • Merilno območje: pribl. 0–100 mm • Indikator: Blankenhorn / Käfer – izdelano v Nemčiji • Stanje: rabljeno, delujoče, zelo dobro. Ljdpfxextwxus Anfoab

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, STC-Ref:G-671-2399 Horizon VAC 100A + SPF200 + FCA 200a, leto izdelave: 2012 Lajdpfx Asywhczsnfeb Skupni števec: 11 milijonov. Oprema: - 1 postaja tipa VAC 100 a - Kratki tračni izstop - Rezalnik FC-200 A - Enota za spenjanje in zgibanje SPF 200 A - 1 zbirni stolp VAC 100 a - 2 spenjalni glavi Hohner - Zaslon (monitor) --> Na voljo od: 04/2026

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Laedpfewf U Rujx Anfeb Power consumption: 76 kVA Machine height at 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l

Stanje: novo, General Minimum diameter of workpieces: 25 mm Maximum diameter of workpieces: 270 mm Minimum size of hexagonal workpieces: 25 mm Maximum size of hexagonal workpieces: 200 mm Ljdpoh Dw Diefx Anfsab Maximum stacking height: 2 x 350 mm Maximum stack weight: 2 x 450 kg Length of automation: 1,902 mm Width of automation: 740 mm Height of automation: 2,202 mm Total system weight: 1,000 kg Electrical connection: 380 VAC Pneumatic consumption: < 100 L / min Robot Payload: 25 kg / 19 kg net Payload: 35 kg / 28 kg net Safety Standard Safety with laser scanner Protection via integrated wall Option Protection via light curtain Protection via separate mesh wall Protection via separate transparent wall Protection via sliding doors

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Lajdpoy Aldaefx Anfeb