Meta Sistem Za Vzorčenje Talnega Zraka Za Analizo Tal nakup rabljenega (87.794)

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks Bjdov Tm Ayopfx Akrsdc + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Stanje: rabljeno, 1 kos sistem za povezovanje CNP CANAPA 35 Bdsdpjy Tkiijfx Akrjc 220V Barva: kot prikazano, po slikah in ogledu Dimenzije D/Š/V: 90x60x76cm Stanje: rabljeno

Leto izdelave: 2006, stanje: kot nova (razstavni stroj), številka stroja/vozila: 31331, DISTILATOR DNP 2000 SEMIAUTOMAT – SISTEM DE DISTILARE CU ABURI PENTRU PROTEINĂ-AZOT Raypa DNP-2000 An fabricație: 2006, neutilizat Distilator pentru proteină-azot bazat pe metoda Kjeldahl. Automat, pentru analiza azotului proteic din probe de materii prime sau materiale procesate, destinat industriei alimentare. Disponibile metode specifice. Rezultatele sunt conforme cu reglementările: EN/ISO, AOAC. DISTILATOR DE AZOT – DNP-2000 Caracteristici • Douăzeci de programe liber configurabile de utilizator. • Sistemul dispune suplimentar de trei programe fixe: – Test cu sulfat de amoniu. – Preîncălzirea sistemului. – Spălarea recipientului de deșeuri. Avantaje • Kit opțional pentru titrare automată. • Aspirare eșantion. • 20 programe utilizator. • Calibrare pompă de către utilizator. • Generator de abur cu control nivel apă. • Pompă acid boric. • Senzor ușă deschisă. Performanțe • Domeniu de măsurare: 0,1–200 mg N. • Randament recuperare azot: >99,5%. • Reproductibilitate: ±1%. • Timp distilare: 4 min/100 ml. • Consum apă de răcire: 1,2 l/min. • Putere: 2000 W (100%). Parametri și valori programabile • Apă pentru diluție: 0–240 ml. • Soluție OHNa: 0–240 ml. • Soluție H3BO3: 0–240 ml. • Timp reacție (întârziere): 0–30 min. • Timp distilare: 0–30 min sau nelimitat. • Reglarea puterii aburului: 30–100%. Siguranță • Detecție ușă închisă. • Detecție tub digestie. • Termostat supratemperatură. • Utilizare în industria alimentară și oenologie (vinificație). • Documentație: manual de instrucțiuni + garnituri montaj și mufă. • Pentru companiile din România este posibilă vânzarea în rate. Bdodpfjfiliwex Akrec Preț: 3.600 Euro + TVA Ex Works încărcat FCA: Oradea/România Ne rezervăm dreptul la erori, modificări și vânzare intermediară. Vorbit cu: vorbim engleză/Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim româna.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, MAFELL Erika table saw with a side-adjustable fence Bsdpfx Aksud At Rerjdc

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Bjdpey Aagiefx Akredc Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Mere (dolžina/širina/višina): 1700 x 800 x 2100 mm Število filtrskih vreč: 1 kos Število vreč za ostružke: 1 kos Premer cevi: 160 mm Dolžina cevi: 4000 mm Sesalna zmogljivost: 1850 m³/h Moč motorja: 3 kW Ta odsesovalna naprava je v dobrem stanju, takoj na voljo in jo je možno na mestu prodajalca preizkusiti pod napetostjo. Bedpfx Ajxcyymskrodc OPIS: - Ciklon predločevalnik z rotacijskim celičnim zapornim ventilom za iztok med delovanjem - Mobilno - Primerno za odsesavanje vnetljivih prahov Dimenzije: Odsesovalec: 1,7 (širina) x 0,8 (globina) x 2,1 m (višina) Predseparacijska enota: 1,1 (širina) x 1 (globina) x 2,8 m (višina)

Stanje: rabljeno, Feeding Technology / Feed System / Vibratory Feeder / Sorting Unit / Bowl Feeder Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screw Technology Feed System DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The unit was used for feeding electrical connector contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed conveyor supplies the pins on demand to the bowl feeder. From the bowl feeder, the product is fed via a linear feeder to the part turner. The part turner aligns the product to the correct orientation and releases it for further processing. The unit comes from a prototype system; an external electrical control is not included and should be provided via a PLC. Without modification, suitable for automatic and correctly oriented feeding of threaded bolts up to M4 x 40, for example. The unit consists of the following components: 1 piece Belt Hopper / Feed Conveyor DEPRAG Type: B 10 Serial No.: 1178201 Order No: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Belt surface dimpled - Foldable stainless steel chute Weight: 11 kg 1 piece Bowl Feeder Vibratory Pot KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl inner height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Bowl Feeder Type: SZG Controller 6 Bedpekpwuusfx Akredc Manufacturing No.: 35 1 piece Linear Feeder KENDRION Type: WS3B/36 Part No.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Linear Feeder Type: SZG Controller 6 Manufacturing No.: 35 1 piece FESTO Part Turner with 180° swiveling range - 1 piece FESTO Valve Block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR Base Module Type MVP12 - Complete unit mounted on a steel plate with 4 support feet Space required (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Stanje: dober (rabljeno), Rabljena, komaj uporabljena Nederman naprava za odsesavanje izpušnih plinov za tovornjake in osebna vozila. Pošiljanje ni možno. Prosimo, ne pošiljajte e-poštnih povpraševanj! Za vprašanja smo vam na voljo po telefonu. Ogled in prevzem sta možna samo po predhodnem telefonskem dogovoru. Pridržujemo si pravico do sprememb, vmesne prodaje in napak. Bdodezapy Eepfx Akrsc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, delovna širina: 615 mm, skupna širina: 3.100 mm, skupna dolžina: 750 mm, skupna višina: 1.135 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 320 kg, dolžina rezanja (maks.): 600 mm, širina transportnega traku: 615 mm, leto zadnje generalne obnove: 2022, Linija za rezane žemljice Frilado model MSA 80 Ročno polnjenje Upravljanje ene osebe Zgornja plošča iz nerjavečega jekla Bjdpfevkthkox Akrsdc Priključek 400V, vtikač 16A-CEE Rabljena stroj Veliko drugih pekarskih strojev na zalogi!

Leto izdelave: 2025, stanje: novo, Parts Cleaning Machine, Spray Cleaning System Type L122 Fully automatic hot water chamber washing machine with basket drive powered by geared motor, machine housing made of stainless steel 1.4301. - 2 stainless steel 3-sided nozzle systems with stainless steel flat jet nozzles - 2 stainless steel washing pumps (Manufacturer: Xylem/Lowara) - Level control as dry-running protection - 2 suction filters for pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. loading weight: 300 kg - Spray pressure: 2x 3 bar Bedpfxohl Ic Re Akrsdc - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Electrical connection load: approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 mm

Stanje: rabljeno, Parker Hiross sušač za komprimovani vazduh za kompresorske sisteme Mehanički separator kondenzata, separator vode Hladni sušač sa vodenohlađenim naknadnim hladnjakom za uklanjanje vodene pare i hlađenje komprimovanog vazduha ili gasova. 1 komad naknadni hladnjak tip WFN009 DHH16 Protok vazduha (normalno): 540 m3/h = 9000 litara/min. Radni pritisak vazduha: max. 16 bar Dužina kućišta: 1020 mm Prečnik kućišta: Ø 105 mm Navojni priključak za vazduh: G 2" Navojni priključak za vodu: G 3/4" Težina naknadnog hladnjaka: 11 kg Dimenzije naknadnog hladnjaka (D x Š x V): 1030 x 850 x 200 mm + 1 komad separator vode tip CSP 008 Protok (normalno): 480 m3/h = 8000 litara/min. Radni pritisak: max. 16 bar Navojni priključak: G 2" - Kućište filtera od aluminijuma + 1 komad mehanički separator kondenzata HIROSS SAC 120 Navojni priključci: R 1/2" Radni pritisak: 16 bar Zapremina: 0,8 litara - radi bez gubitka komprimovanog vazduha Bsdpfx Asdzqn Uokrodc sve montirano kao što se vidi na slikama Visina montaže u stojećem položaju: 2000 mm Ukupna težina oko 40 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Nagel Foldnak 8 z 2 spenjačnimi glavami Nagel SP Plus Square Press Nagel Trimmer s trakovnim izhodom Bdjdpoy Rr Easfx Akrec

Stanje: dober (rabljeno), Leto izdelave: 2013, Sorter for light loads, Optimus, SORTATION SYSTEM OPTISORTER HORIZONTAL, 200 trays, configured for 261 destinations – used - : Price sorter incl. control unit: ex location: €99,500 (net), including dismantling, packaging, and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control unit: Siemens S7 Layout: OS-680113-264-D01 Bodpfx Aowxu A Rokrodc System capacity: 6,000 trays/hour Total system length: 53 m Total system width: 14 m Number of infeed stations: 1 Infeed station width: 2 m Number of trays: 200 pcs Usable tray size: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min: 150 / 120 / 10mm Max: 600 / 400 / 200mm Weight: min: 0.25kg / max.: 5kg No longer available: roller conveyors, pick-by-light, flap elements. At each sorting station there were two outputs, which sorted onto an upper or lower destination roller conveyor via a tilting chute. Total number of sort destinations in the system: the plant had 261 destinations. Number of destinations for special purposes (overflow, reject, etc.): 3 pcs. There is a pick-by-light system at the destination roller conveyor. This means all parts installed after tray dropping in the system flow are no longer available and are therefore not part of the sale! Condition: good Available immediately Location: Warehouse Frankenberg / Saxony Detailed description available on request in PDF (in English).

Stanje: rabljeno, številka stroja/vozila: 008597, Pozicija 1: Krožna žaga za plošče z avtomatskim podajanjem SCHELLING-VS 12 - FH6 - FH4 Bdedpfx Aksy Stvpjrjc Pozicija 2: Krožna žaga za plošče – podajanje spredaj SCHELLING-VS 12 - FH6 - FH4 Pozicija 3: Avtomatizirano skladišče SCHELLING-VS 12 - FH6 - FH4

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, Šivalni stroj Horizon SPF-200L+FC-200L+LC-200 (brez zbiralnika). Stroj je v originalni embalaži (popolnoma nov, nikoli uporabljen). Kot uradni prodajalec lahko zagotovimo montažo in usposabljanje. Bdjdjy R Ayhepfx Akrjc

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Bodpfjif Sg Ssx Akrjdc Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm Bodpfx Aefirx Nekrodc - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Leto izdelave: 2022, obratovalne ure: 200 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, AirBasic je prenosni stroj za ločevanje lahkih in težkih sestavin različnih sipkih materialov. Stroj je kot nov in je bil zelo malo uporabljen. Navodila za uporabo in tehnični listi so na voljo v obliki PDF. Bsdeyddazopfx Akrjdc

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski zlagalnik Timme z magazinom za letve. Premični voziček s hidravlično dvižno mizo, krmiljenje Siemens S7. Dolžine do 6,0 m. Zelo malo uporabljen, na voljo zaradi prestrukturiranja. Video prikaz delovanja stroja vam lahko z veseljem pošljemo. Bedpfxoy S Ucwj Akrjdc

Stanje: rabljeno, S to ponudbo pridobite rabljeni sistem za izdelavo brošur "Plockmatic PBM500". Predmet prodaje: Bsdpfxsudv T Ro Akrsdc 1 x Plockmatic PBM500 Stanje: Ponujena naprava je rabljena in lahko kaže znake uporabe (manjše praske ali porumenelost). Naprava je bila preizkušena za funkcionalnost. Pakiranje in dostava: Napravo si lahko ogledate v času našega poslovanja. Za ogled se prosimo predhodno dogovorite! Pomorsko varno pakiranje in svetovna dostava sta na zahtevo možna! Pred odpremo ali prevzemom bo opravljen in posnet funkcionalni test. Za dodatne informacije se lahko tudi osebno obrnete na nas.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rex RKS 85 | Sausage Hanging and Twisting System Manufacturer: REX Technologie GmbH & Co. KG Model / Type: RKS 85 Serial Number: 2130216 Year of Manufacture: 2016 Power Supply: 400 V / 50/60 Hz Current Protection: 3x 16 A Overall Dimensions: 1450 x 660 x 1400 mm The Rex Technologie RKS 85 is a high-performance, automatic sausage twisting and hanging system (longitudinal calibrating), designed as a peripheral device to work directly with vacuum fillers. The 2016 unit represents a key element in automating production processes in medium and large-scale sausage production facilities. The RKS 85 system is responsible for the precise, repeatable portioning of sausage strands into uniform sections (in natural, artificial, or collagen casings), followed by automatic loop forming and precise placement onto hooks—for easy transfer onto smokehouse rods. The machine minimizes the risk of casing breakage and guarantees a constant weight and identical length of each individual sausage. Key features and benefits: - Precise portion control and calibration: An advanced belt-driven feeding and portioning system gently yet securely grips the filled casing, eliminating air pockets inside the sausage and ensuring an ideal appearance of the final product. - Versatility and quick retooling: The machine efficiently handles a wide range of sausage calibers and lengths (from thin kabanos to traditional grill sausages or frankfurters). Product parameters and assortment can be easily changed via the vacuum filler’s control computer or the machine’s control panel. Bedey Uchmopfx Akredc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, trajanje garancije: 6 meseci, skupna širina: 505 mm, skupna dolžina: 1.010 mm, skupna višina: 500 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 49 kg, širina transportnega traku: 100 mm, leto zadnje generalne obnove: 2026, Broma stiskalnik za mlečne žemljice Stiskalnik za mlečne žemljice / koščke testa ... kot ročno! Za ročno rokovanje / enosebno upravljanje Nastavljiv pritisk Dolgi izhodni trak Namizna naprava Samo pri nas preizkušeno po DGUV V3 Priklop 400V, vtič 16A-CEE Rabljeni stroj, obnovljen in pregledan s strani SAB Z garancijo + servisom Možnosti: Vzdrževalna pogodba Dostavna storitev Obiščite našo veliko razstavo pekarskih strojev! Bjdpfsidp Nmox Akrodc

Stanje: rabljeno, v celoti iz nerjavečega jekla premičen brezstopenjska hitrost z odpihovalno napravo širina tira 600 mm dimenzije (D × Š × V): ± 3.250 × 1.000 × 2.000 mm Bdedpfx Akjzaar Eerec

Stanje: rabljeno, Leto izdelave: 2022, Volumski pretok: 18.000 m³/h, aktivna filtrirna površina 237,6 m², izpust kondenzata, za 10 obdelovalnih centrov, postavljen na lastno izdelano jekleno ogrodje nad vhodnimi vrati hale, kompletno s cevovodom, izdelanim po merah prostora, kot dovod do posameznih CNC obdelovalnih centrov, vmesna prodaja pridržana. Bodpfxjy T Nxvs Akredc

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low water charging temperatures + Precise dough temperature control all year round + Rapid swelling during mixing without the need for ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible with water mixing and dosing devices + All water-conducting parts are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel refrigeration evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath Bedpeivdv Defx Akredc + High flow capacity + Compact dimensions + Easy-to-clean surface texture + Low energy consumption SPECIAL accessories, optionally available for an extra charge: - 3-way changeover valves --- for water mixing and dosing units with only two inlets (cold / hot) + €349,-- net Technical data: - Batch size (recommended): up to 70 litres - Continuous capacity*: 230 litres / hour - Peak cooling capacity*: 500 litres / hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 litres / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption per 100 litres: 1.5 - 2.5 kWh * at inlet temperature +17.5°C and outlet temperature +2.5°C