Knapen Schubboden 10 Mm Boden Sofort Verfügbar nakup rabljenega (93.654)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000211, lastna masa: 7.707 kg, največja dovoljena obremenitev: 27.293 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 15.030 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 101 m³, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: srebrn, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis semi-trailer for freight forwarding Fine-grain steel welded lightweight construction to the support legs, fifth wheel plate with replaceable 2-inch kingpin 24 t 2-speed landing gear, single-side operation, with straight lower part Pull-out ladder at the rear Side door holders 2 wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel, with wide Fliegl mud flaps Foldable mudguard for lighting unit Quarter shell mudguards Rear impact protection Tarp rod with bracket 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Coloured hose runs for easy maintenance Spring-type parking brake Duomatic EBS, electronic braking system with EBS socket at the front, no connecting cable Note: The trailer must only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve Vehicle - Driving Stability System AAC Basic, automatic lift axle on the last axle, acts as shunting aid up to 20 km/h, manually switchable Axle load detection via EBS CAN bus signal Wheels and Tyres 385/55 R22.5 – make at manufacturer’s choice Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting connected to indicator “flashing side markers” 2 white front position lights 2 white/red lane departure lamps at the rear 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, no connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. 2-circuit hydraulics. Lhedpfxey Snmpj Aamoi Direction change (forward/reverse) is electrically operated by wired remote control. Hydraulic actuation via truck PTO Hydraulic connection with hose at front wall and HDK screw connector Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l Floor planking made of aluminium, 8 mm profiled, grooved Aluminium box body from high-quality, wear-resistant material. Front and side walls made from aluminium hollow profiles, all round at the top welded with a wide special reinforcement profile in aluminium Sliding wall for easier unloading, with reinforced tarpaulin at the bottom Rear wall from aluminium hollow profiles, double-winged door divided 1/2 to 1/2, with special U-profile frame with stop and rubber gasket all round, 2 external swing bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in direction of travel, with pivoting crossbar at top. Standing platform with ladders on both sides 3 removable, swivel crossbars for tarp support Sliding sheet, stowable on one side, with 2 longitudinal tensioning straps, 3 ratchet straps at the side Operating Instructions Special permit required if total hitch length exceeds 16,500 mm. Country of Registration / Plates Germany with Dekra inspection and certificate (§13 EC-FGV) Warning sign "Long HGV" Long-HGV combination inspection certificate Driver instruction at Triptis factory for up to 4 persons per truck combination Paintwork Frame: DB 7350 Novagrau tipper body: aluminium natural finish Tarpaulin: RAL 7035 light grey

Stanje: rabljeno, največja dovoljena obremenitev: 27.290 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.853 mm, Oprema: ABS, SDS390 101m³ X-TRA Long Moving Floor SAF Lift Axle * German Semitrailer * 101m³ X-TRA Long Model * SAF axles * Lift axle * Disc brakes * Floor: moving floor with wear plate at the rear made from V2A stainless steel, floor planks made from aluminium, 8 mm floor profile, ribbed design, end caps in aluminium * Tires: 385/55 R 22.5 — 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information subject to change Lhedpfx Ajrwvl Tsamoi * Further details and criteria on request Additional Service Offerings * Repainting and retrofitting possible * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available: We cooperate with several leasing companies and can offer every customer the best fitting financing solution. We also often support customers with a weaker credit rating and can connect you with strong leasing partners. * In-house workshop Languages spoken: Polish, English, Russian. Repainting in your desired color is available at our facility with high quality and at a competitive price. Unable to visit and inspect the truck in person? No problem—feel free to appoint an independent surveyor of your choice to perform a technical and visual inspection. Should any defects be found, we can remedy them promptly and professionally in our workshop. Additionally, we offer Europe-wide delivery of your new used truck for an extra fee.

Stanje: rabljeno, prevoženi kilometri: 296.629 km, moč: 375 kW (509,86 KM), prva registracija: 10/2022, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, MAN TGX 18.510 Vrhunska oprema Drsno dno Hidravlika * Kabina za dolge razdalje z 2 ležiščema * Zračno vzmeten voznikov sedež * Večfunkcijski volan * Hidravlika * Potovalni računalnik in radio * TV v kabini * Mikrovalovna pečica Lodpfoy Scx Hjx Aamshi * Prednje pnevmatike 385/55R22,5 * Zadnje pnevmatike 315/70R22,5 * Asistenčni sistemi * Splošno vzdrževano stanje Za več informacij smo vam na voljo

Stanje: rabljeno, We are offering used order picking trolleys for sale. TECHNICAL DATA Height: 1,800 mm Width: 1,270 mm Depth: 470 mm Number of Shelves: 3 units + clothes rail 2 push handles 4 swivel castors with tracking wheel with side step Assembled Condition: used PRICE €140.00 net €166.60 gross incl. VAT Available quantity: 439 units Tiered pricing (per unit) 1 – 5 units: €130.00 net 6 – 10 units: €123.50 net 11 – 25 units: €117.00 net 26 – 50 units: €110.50 net 51 – 100 units: €104.00 net from 101 units: €97.50 net YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and the scope of shipment and can be requested individually from us. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, customized offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to support you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price refers to the unit price/net price as stated in the description (plus VAT). Of course, you will receive an invoice with the VAT shown separately. Ledpoy Eqnmefx Aamehi ABOUT US DLK, located in Nordhorn, trades in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. If you have any questions, please feel free to contact us. Four is a win – The four success pillars of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, lastna masa: 6.050 kg, največja dovoljena obremenitev: 27.950 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Oprema: ABS, | Schwarzmüller, serija K, 3-osna jeklena segmentna prikolica | Prostornina: pribl. 25 m³ | ABS / EBS | 9-tonske osi SAF s kolutnimi zavorami | Polno zračno vzmetenje | Zunanja vrata | Pnevmatike: 385/65 R 22,5 | Jeklena okrogla prikolica, 7.650 mm x 1.470 mm | Dno iz 5 mm HB 450 | Stene iz 4 mm HB 450 | Ploščad spredaj | Lastna teža: 6050 kg | Pokrivna ponjava | Pridržane spremembe, napake pri vnosu podatkov in možnost predprodaje. Lhedpfx Aajzk Ikiomoi

Stanje: novo, Leto izdelave: 2023, laserska moč: 8.000 W, Fibre laser machine HLF available from stock, ready for immediate delivery. An identical machine can be tested under power at our facility. Performance: 8kW Sheet size: 3000 x 1500mm automatic shuttle table incl. ball transfer system for scratch-free workpiece positioning Siemens touchscreen control with LAN/USB Siemens drives Precitec Auto Focus Procutter cutting head sheet metal measurement IPG resonator with 8kW / alternatively MAX Photonics small parts conveyor belt includes: Warranty CAD / CAM software Commissioning Lsdpeqgcwtofx Aamehi Delivery (within Germany) Donaldson extraction unit Training available This machine is a stock machine and therefore available at short notice. We already have 300+ similar and identical machines operating under power in Germany and throughout Europe. Reference visits to users are possible at any time. Contact us now!

Stanje: novo, Leto izdelave: 2023, New Fiber Lasers of the HLE Series – Optimized configuration focused on the essentials – Low acquisition costs despite high-quality components. Max Photonics resonator and Precitec cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs. SPECIFICATION: Cutting head: PRECITEC LIGHT CUTTER – Auto Focus Resonator 3KW (6KW/8KW/12KW optional) Automatic shuttle table incl. safety light barriers Extraction unit: DONALDSON DFOE CE certified BECKHOFF control system with touchscreen Sheet format 3,000mm x 1,500mm (4,000 x 2,000 optional) Maximum sheet thickness at 3KW: Mild steel: 15mm Stainless steel: 10mm Aluminum: 10mm Copper: 6mm Power connection max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine comes including: - 24-month warranty - CAD CAM software Libellula [CUT], 1 license - Commissioning - Delivery within Germany and Lodjqgcx Uepfx Aamehi - Software / operator training offered Connect gas and power, and you are ready to operate. In our showroom, we have a range of laser machines from our manufacturers under power, as well as various materials available for testing. We are happy to invite you to visit us and cut your drawings or your material. We, H+S, have been an exclusive distributor and service provider for YAWEI machines for 15 years, selling their fiber lasers for approx. 8 years. We have already installed more than 300 YAWEI fiber lasers. Convince yourself, also at a location near you. An identical HLE1530 3kW can be tested at any time at our facility. Call us and visit us!

Stanje: novo, Leto izdelave: 2023, laserska moč: 6.000 W, We have been trading YAWEI fiber laser machines for over 7 years and provide comprehensive service for these systems. All you need to supply are gases and electricity—we take care of everything else. We have already installed over 300 YAWEI fiber lasers across Europe. We are currently offering a new YAWEI fiber laser stock machine, model HLF1530. Performance: 6kW Mild steel up to 25mm / Stainless steel up to 15mm / Copper up to 8mm Sheet size: 3000 x 1500mm Siemens DsL touchscreen control with LAN/USB Siemens drives THK linear guides Automatic shuttle table with light barriers Precitec Autofocus Procutter cutting head MAX Photonics resonator with 6kW and on-site warranty in Germany Small parts conveyor belt Ball transfer table for scratch-free, easy sheet metal handling 24-month warranty CAD/CAM software Commissioning Delivery (within Germany) Training CE certification This is a stock machine. An identical model can be demonstrated under power at our facility at any time. Lsdpfjqgcyrsx Aamohi Call us today!

Stanje: novo, Debelina pločevine: 10 mm Dolžina pločevine: 3200 mm Kombiniran paket: CNC-upogibni stroj & škarje s krožnim rezom Za natančno, učinkovito in varno obdelavo pločevine Nudimo vam zmogljiv kompleten paket, ki obsega CNC-upogibni stroj (160 t / 3200 mm) in škarje s krožnim rezom (10 mm / 3200 mm) – optimalno usklajena za sodobno obdelavo pločevine z visoko natančnostjo in učinkovitostjo. CNC-upogibni stroj – 160 ton / 3.200 mm Z 4 CNC-osmi (Y1, Y2, X, R) in CNC-bombirno enoto Standardna oprema: • Robustna, togostna konstrukcija za natančno upogibanje in dolgo življenjsko dobo • CNC-osi: Y1, Y2, X in R – za točno pozicioniranje in ponovljivost • CNC-bombirna enota (motorizirana) za samodejni popravek upogibnega kota • CNC-krmilje ZY 68 (primerljivo z Delem) – intuitivno, zmogljivo in prilagodljivo • Zadnji naslon z linearnim vodilom & kroglastim vretenom, 4 naslonski prsti • 2 podporni roki za ergonomsko delo s pločevino • Laserska zaščita na zgornjem nosilcu za visoko delovno varnost • Sistem hitrega vpenjanja zgornjega orodja • Orodni sistem: Promecam Amada (ročno razdeljen in poševno oblikovan) • Sistem matric združljiv z Promecam & Amada • Popolna CE-varnostna oprema Škarje s krožnim rezom SWC 3200 x 10 mm Z NC-krmiljem in motoriziranim zadnjim naslonom Lhjdpfx Aszdwfioamoi Tehnični podatki: • Debelina pločevine: do 10 mm, dolžina reza: 3.200 mm • Kot reza: 1,30°, moč motorja: 15 kW • Motoriziran zadnji naslon: do 1.000 mm • Dimenzije: D 3.800 × Š 1.820 × V 1.920 mm • Teža: 7.700 kg Oprema: • Izvedba s krožnim rezom za čiste reze • NC-krmilje ELGO P40 T z upravljanjem s sprednje strani (vklj. z nastavitvijo reže) • Hidravlični pritrdilci blizu linije reza • Pregledna upravljalna plošča na vrtljivem nosilcu • Nožno stikalo, nastavitev reže & osvetlitev rezne linije • Široka podporna miza z drsnimi kroglicami, 2 podporni roki s T-utorjem • Dvižna zaščita za prste, 1 stranski naslon s T-utorjem • Zgornji nož dvostransko, spodnji nož štirikrat uporaben • Nastavljiva dolžina reza za prihranek časa • Kvalificirana poprodajna podpora, angleška navodila za uporabo • Izvedba skladno s CE • Pnevmatska naprava za dvigovanje pločevine Vaša prednost – vse iz ene roke: • Popolnoma usklajene stroji • Prihranek časa in stroškov zaradi kombinirane ponudbe • Idealno za delavnice, kovinarje & izvajalce storitvene proizvodnje Povprašajte zdaj in si zagotovite neobvezujočo ponudbo!

Stanje: novo, Debelina pločevine: 10 mm Dolžina pločevine: 3200 mm Kombiniran paket: CNC kantni stroj in nihajna škarja za pločevino Za natančno, ekonomično in varno obdelavo pločevine Ponujamo vam zmogljiv komplet, sestavljen iz CNC kantnega stroja (160 t / 3200 mm) in nihajne škarje za pločevino (10 mm / 3200 mm) – optimalna kombinacija za sodobno obdelavo pločevin z visoko stopnjo natančnosti in učinkovitosti. CNC kantni stroj – 160 ton / 3.200 mm S 4 CNC-osmi (Y1, Y2, X, R) in CNC bombirno napravo Standardna oprema: - Robustna, torzijsko toga konstrukcija za natančno upogibanje in dolgo življenjsko dobo - CNC osi: Y1, Y2, X in R za točno pozicioniranje in ponovljivost - Motorizirana CNC bombirna naprava za samodejni popravek kote upogiba - CNC krmilje ZY 68 (primerljivo z Delem), intuitivno, zmogljivo in prilagodljivo - Zadnji prislon z linearnimi vodili in krogličnim vretenom, 4 prislonski prsti - 2 roki za odlaganje pločevine za ergonomsko delo - Laserska varnostna naprava na zgornjem nosilcu za visoko varnost pri delu - Hitro-vpenjalni sistem za zgornje orodje - Orodni sistem: Promecam Amada (deljen in zamaknjen) - Sistem matric kompatibilen s Promecam & Amada - Popolna CE varnostna oprema Nihajna škarja za pločevino SWC 3200 x 10 mm Z NC krmiljem in motoriziranim zadnjim prislonom Tehnični podatki: - Debelina pločevine: do 10 mm, dolžina reza: 3.200 mm - Kot reza: 1,30°, moč motorja: 15 kW - Motoriziran zadnji prislon: do 1.000 mm - Dimenzije: D 3.800 × Š 1.820 × V 1.920 mm - Teža: 7.700 kg Opremljenost: - Nihajno rezanje za čiste reze - NC krmilje ELGO P40 T z upravljanjem od spredaj (vključno z nastavitvijo reže) - Hidravlični pritiskači tesno ob rezni liniji - Pregleden upravljalni pult na vrtljivem nosilcu - Noga stikalo, nastavitev reže in osvetlitev rezne linije - Široka odlagalna miza z drsnimi kroglami, 2 roki za odlaganje pločevine s T-utorom - Zložljiva varnostna zaščita za prste, 1 bočni prislon s T-utorom - Zgornji nož obojestransko uporaben, spodnji nož štirikrat obojestransko uporaben - Nastavljiva dolžina reza za prihranek časa - Kvalificirana poprodajna podpora, navodila za uporabo v angleščini Lodpfjwnz Apox Aamohi - CE skladna konstrukcija - Pnevmatska naprava za dvig pločevine Vaša prednost – vse iz ene roke: - Popolnoma usklajeni stroji - Prihranek časa in stroškov z združenim paketom - Idealno za delavnice, kovinarje in podizvajalce Povprašajte zdaj in si zagotovite neobvezujočo ponudbo!

Stanje: novo, Leto izdelave: 2024, Hydraulic Guillotine Shear MVD I-SHEAR C 3100 – 10 complete with pneumatic rear sheet support. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC BLADE GAP ADJUSTMENT Cutting capacity (material strength 450N/mm²): 10 mm Cutting capacity (material strength 700N/mm²): 6 mm Cutting length: 3100 mm Distance between side frames: 3600 mm Lsdpfx Aefh R Ilsamehi Adjustable cutting angle: 0.5° - 3° Sheet hold-down cylinders: 14 Strokes per minute: 7 – 13 Throat depth: 250 mm Motor power: 22 kW Millimetric squaring arm and two sheet supports (1000 mm each) Backgauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 10.5 tons

Stanje: dober (rabljeno), Trakasti transporter, PD 10, 1x230 V, 4,5 A, 50 Hz, motor 180 W Lhjdpfx Aaezf Hfbsmoi

Stanje: dober (rabljeno), Ločilno orodje, orodje za izsekovanje, izsek, izsekovalna matrica, izsekovalni udarec, strgalo, ploščica strgala Lodpeznafysfx Aamehi -Strgalo: ploščica strgala za orodje za izsekovanje, 4 kosi -Velikost: 10/15/30/40 mm -Mere: glejte fotografije -Dobava/cena: komplet -Dimenzije za transport: 150/110/V60 mm -Teža: 6,1 kg

Stanje: rabljeno, največja dovoljena obremenitev: 31.640 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.730 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, 3-axle SCHWARZMÜLLER all-aluminium walking floor semi-trailer, 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Coupling height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg Aluminium chassis SAF axles with large disc brakes, 430 mm, reinforced "off-road" version WABCO trailer EBS with RSS anti-skid control 1st axle lift axle Air tanks made of aluminium Tyres: 6 x 385/65 R 22.5 JOST full-load crank landing gears ASPÖCK full LED lighting 4 x LED work lights Toolbox rear left Side wall profile joints inside fully welded CARGOFLOOR moving floor with 21 slats, material thickness 8 mm, ribbed Control with remote radio control Rear end plate made of stainless steel 3 roof bows, reinforced waste version Roof tarpaulin, reinforced version, PANAMA 900 g/sqm Rear crossbeam swivel-mounted With grain slider in the left door wing 15 pairs of recessed lashing rings in the end profile Lsdpfeyrlcgex Aamshi RENTING is the new BUYING—immediately available from us, also with FULL-SERVICE RENTAL

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. Lhsdpfx Aasd R Ev Dsmsi The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Location: In stock at 54634 Bitburg - free loading - Can be shipped for a fee

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min Ljdpfx Aashkz E Temjhi The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Ledpeqlck Nefx Aamehi Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Woodworking machinesSliding Table Spindle Moulder Minimax twf55 es Item number: 5502261 Robust steel and cast iron construction Anodised aluminium format sliding table Large-scale spindle unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3500 to 10000 rpm Clockwise and counterclockwise rotation standard Height and tilt display precise to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for permanent precision Powerful 5.0 kW industrial motor Curved section hood included Made in Italy Dimensions and Weights Length (Product) approx. 1200 mm Width/Depth (Product) approx. 2000 mm Weight (Net) approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Setup Information Required Space Length: 2800 mm Required Space Width/Depth: 2910 mm Space Requirement Note: Dimensions account for maximum travel paths or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Working area note: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Lhodpfsi Dphtox Aamji Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Motor output: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED at machine front Spindle shaft diameter: 30 mm Max. Tool Diameter Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tool diameter for profile milling: 240 mm Max. tool diameter for tenoning: 320 mm EQUIPMENT Features Aluminium sliding table: ✔ Spindle fence: Heavy-duty professional design with hold-down, safety cover and aluminium spindle fence jaws Telescopic mitre fence: with two flip stops Extension table: ✔ Curved section safety hood: ✔ Eccentric clamp: ✔ Handle on sliding table: ✔ Manual spindle height adjustment Manual spindle tilt adjustment Control: Manual height and tilt adjustment of the spindle unit Control elements location: On machine body Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Ledpfx Aeff Efajamjhi Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, Hebrock F 5 Če želite maksimalno učinkovitost, je Hebrock F 5 rešitev za obdelavo robov v zahtevnem obrtnem podjetju. F 5 zagotavlja obdelavo robov v vseh korakih, saj je opremljen z vsemi komponentami, ki jih potrebujete za vaše zahteve: strojna freza za utore, krožna žaga, frezalna glava, večradijna strgalna rezila, kotna freza, ploščata strgalna rezila, postaja za čiščenje. Za še večjo prilagodljivost na poti do popolnega zaključka je mogoče F 5 dodatno opremiti s praktičnimi večradijskimi strgalnimi rezili. maks. debelina roba: 3 mm maks. debelina obdelovanca: 50 mm Pripravljen za uporabo v 3,5 min Oprema: Hebrock F5 Next - 10 m/min Ljdjlht Hwepfx Aamjhi Stroj za obdelavo robov F5 Next S krmiljenjem PLC (vključno s zaslonom na dotik) in s sistemom za nanašanje taljenega lepila na obdelovanec za robne materiale do 3 mm; strojna freza za utore (vključno z diamantnim orodjem) do 2 mm globine reza, brez vzdrževanja rezervoar za lepilo s pripravljenim sistemom za menjavo rezervoarja, vključno z napravo za izlivanje lepila, visokofrekvenčna krožna žaga (približno 12000 vrt/min), visokofrekvenčna frezalna postaja (približno 12000 vrt/min) z ločeno pnevmatsko nastavitvijo freze in frezo z menjalnimi ploščami (kombinirana izvedba), kotna freza, večradijsko strgalno rezilo, ploščato strgalno rezilo (vključno s pnevmatskim sistemom za dvig), postaja za čiščenje, robusten verižni pogon, dvojni valjčni zgornji pritisk z krogličnimi ležaji, okno za pregled na hrbtni strani stroja, izvlečni podstavek za obdelovanec, napredovanje približno 10 m/min. Hebrock F5 F5/08/4 Priprava za hitro menjavo kotne freze F5/08/5 dodatni menjalni motor za kotno frezo z orodjem F5/09/4 Večradijsko strgalno rezilo (R1/R2) F5/10 Podvozje F5/14 Dodatni menjalni rezervoar F5/24/1 Razpršilna naprava za ločilno sredstvo F5/24/2 Razpršilna naprava za čistilno sredstvo F5/25 Razpršilna naprava za obdelavo roba F5/27 Držalo za frezo in večradijsko strgalno rezilo F6/28 Razpršilno nanašanje za teksturno obdelavo F5/30 Pnevmatska 3-točkovna nastavitev (freza za robove, faze in izravnavanje) F5/31 Spajanje do 50 mm F5/32 LED osvelitev Lokacija: Na zalogi, 54634 Bitburg - na voljo takoj -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Ledpfxsqlckpo Aamjhi Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller Lhedok Dpp Sepfx Aamei - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Lodpfx Aajlht Hzsmehi Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2026, Glue application machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Max. clearance height: 100 mm Speed: 18 m/min Working height: 900 mm Lsdpfx Aod Iz Dfjamohi Application roller diameter: 185 mm Connected load: 0.5 Hp, 0.37 kW Operator side: right Electrics: 400 V / 50 Hz / 3 phase Technical features: - Frame of the glue application machine made from welded steel plate. - 1 motor for driving the two rollers - Glue application rollers covered with special acid-resistant rubber, precision-ground and grooved, abrasion-resistant. - The thick rubber layer can be re-ground several times. - Special dampers on the roller supports allow for automatic opening of the rollers to compensate for workpiece irregularities up to max. 5 mm. - Glue dosing via zinc-coated distribution tray, easily removable for cleaning. - 1 handwheel for adjusting roller opening - Roller safety guard for operator protection - Electrical components meet the highest quality standards - CE conformity

Stanje: novo, Leto izdelave: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design incorporates numerous technical innovations that enhance the functionality and usability of this panel saw. Its high-quality workmanship places it among the best in its class. The machine comes standard with an aluminum sliding table CV 360T, featuring a highly precise and securely mounted guide on hardened rails. Optional equipment includes the robust multi-chamber aluminum sliding table CV 400T, offering a very rigid construction and precision assembly with steel bar mounting. Sliding table size: 400 x 3200 mm. Precision and reliability are assured by the heavy-duty swivel segment guidance of the sawing mechanism within the rugged cast iron body, as well as a separate scoring unit with its own motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40%: 7.5 kW/3×400 V Motor speed: 2,870 rpm Max. saw blade diameter with scorer: Ø 350 mm Spindle diameter: 30 mm (1″) Saw blade spindle speed: 4,450 rpm Max. cutting height: 120 mm (83 mm at 45°) Saw blade tilt: 0° to 45° Max. cutting width: 1,300 mm Scoring unit Motor power: 0.75 kW (1 kW) Blade diameter: Ø 120 mm (100 mm) Spindle diameter: Ø 20 mm Speed: 8,530 rpm Machine dimensions Length: 3,355 mm Width: 3,450 mm Table height: 892 mm Max. machine height: 1,460 mm Table size: 1,185 x 500 mm Extraction port diameter: 100 + 100 mm Gross weight: 680 kg Net weight: 675 kg Lhsdpfx Aaon D Arhemji Aluminum Sliding Table CV360T Table size: 3,200 x 360 mm Support frame size: 1,240 x 650 mm Cutting length: 3,200 mm Power supply protection: 16 A (25 A) Noise level (without technology): 81.8 dB(A) Noise level (with technology): 85.3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -