Klingelnberg Stroj Za Rezanje Spiralnih Stožčastih Zobnikov nakup rabljenega (91.609)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezalni stroj IDEAL 4850-95 EP Z AVTOMATSKIM STISKANJEM IN PROGRAMSKO KRMILJENIM ZADNJIM OGRADIČEM 475 mm dolžina reza | elektromehansko pogonjen rezalni nož | avtomatsko stiskanje | električno upravljana zadnja ograjica z modulom za upravljanje „EP“ | elektronsko ročno kolo z brezstopenjsko nastavljivo hitrostjo za natančno nastavitev zadnje ograjice | optični indikator reza | pritiskalna letev, ki je na obeh straneh vodena in se lahko upravlja neodvisno od noža | natančna vretena zadnje ograjice | nastavljiv zatič zadnje ograjice z ozko delitvijo in plastičnimi drsniki | po dva stranska vodila na prednji in zadnji mizi | popolnoma jekleno držalo noža in nastavljiva vodila noža | kompleten z osnovnim okvirjem in podlago za odlaganje papirja | Elektronsko upravljana, vrtljiva varnostna naprava na prednji mizi; prozorna varnostna zaščita na zadnji mizi; glavni stikalo in varnostna ključavnica s ključem; dvoročno sprožilo reza z blokado ponavljanja in sinhroniziranim upravljanjem; 24-voltno krmiljenje; patentirani varnostni pogon IDEAL; avtomatski povratni hod noža in pritiskalne letve iz katerega koli položaja; diskovna zavora za takojšnjo ustavitev noža; naprava za menjavo noža s pokrito rezalno ploskvijo noža; nastavitev globine noža od zunaj; enostavna menjava noža od spredaj, brez odstranjevanja delov ohišja. Priključek na omrežje: 230 V / 50 Hz / Mere (V x Š x G): 1230 x 755 x 970 mm, teža: 215 kg, barva: biserno siva. Hjdpezqzxgjfx Alter Dolžina reza 475 mm Višina reza 80 mm Ostanki po rezu 35 mm Globina vstavljanja 450 mm Priključek za napajanje 230 V / 50 Hz Naše ponudbe vključujejo rabljene stroje, ki imajo lahko znake uporabe (manjše praske ali porumenelosti).

Stanje: rabljeno, Leto izdelave: 2009, CNC portalna plazemska rezalna naprava Proizvajalec: Messer Tip: Multitherm 4000 Hsdpfxjzmv Dco Altor Letnik: 2009 CNC krmiljenje: Global Control Plus Širina tirnice: 4.000 mm 2 x plazemski rezalnik z napajalnikom Hypertherm HPR260 Dolžina tirnice: 10 m 2 x oscilirajoča transportna miza Velikost: 3 x 3 m brez filtrirne naprave 22726

Stanje: rabljeno, Antique guillotine paper cutting machine - Ancient Guillotine CHN. Mansfeld SM Serial number: 37544 Very beautiful antique guillotine paper cutting machine. Sehr schöne antike Schneidemaschine. Online video inspection possible via WhatsApp, Microsoft Zoom, or Telegram. Hjdpfxovkx Suo Alter In stock in Emskirchen/Nuremberg – Immediately available – Test run possible.

Leto izdelave: 1970, stanje: pripravljen za uporabo (rabljen), Oprema: kolut za odvijanje žice, mehansko vztrajniško kolo, dva vodila za žico, zaprt območje za usmerjanje in rezanje, mehanski sistemi za nadzor krivulj, ekscentričnih in vzvodnih mehanizmov, žleb za odlaganje odrezane žice, pnevmatska servisna enota in pnevmatske cevi, dodano upravljalno ploščo z digitalnim prikazovalnikom, gumb za nujni postanek in prozorna zaščitna pokrovka. Na voljo je možnost ogleda na lokaciji. Hedozqu Hqjpfx Alter

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 24131, Cutting Machine – Guillotine Cutter Senator 115E, Year 1999 Cutting width max. 1150 mm Program – with display Hsdpfx Aouu Rvpjltjr Air table – chrome table CE certificate Power supply: 3-phase, 380V, 10A Spare knives included Online video inspection via Skype available We would be pleased to welcome you for a visit – more machines in stock Available immediately – can be inspected Located in Emskirchen / Nuremberg – testing possible

Stanje: rabljeno, Block back cutter (notching machine) – Block Back Cutter and Notching Machine Hsdpfx Alet Drmnjtor Online video inspection via Skype video We would be delighted to welcome your visit – more machines in stock Available immediately – Inspection possible In stock at Emskirchen/Nuremberg – Test runs possible

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 79, Abstanz- und Einkerbmaschine / Cutting and Notching Machine Schmedt PräCut 65 Baujahr / Year: 1997 - Serien-Nr. 79 Buchblockhöhe: bis zu 350 mm Buchblockdicke: bis zu 90 mm Druckluftversorgung: 10 bar Stromversorgung: 400 V / 50 Hz / 1,6 kW (Drehstrom) Leistung: ca. 250 - 350 Stück / Stunde Online-Videoinspektion via Skype-Video möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Testlauf vor Ort möglich Hodpfx Ajlg Aahelter

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 23042, Cutting Machine / Guillotine Polar 92 EM-MON Year of Manufacture: 1988 / Serial No. 5811711 Cutting width: max. 920 mm Monitor - Program Control Air table Hsdpfxsl Tliwe Altsr Light barrier Side tables Spare knife Including manuals Online video inspection via Skype We welcome your visit – more machines in stock Available immediately – can be inspected In stock at Emskirchen / Nuremberg – can be tested

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 22042, Cutting Machine / Guillotine Polar 72CS Hsdpfjiflgusx Alter Year 1982 - Serial No. 5251311 Max. cutting width: 720 mm Side tables Spare knife – manuals included Online video inspection via Skype available We would be pleased to welcome your visit – more machines in stock Available immediately – can be inspected Located in Emskirchen / Nuremberg – testing possible

Stanje: rabljeno, številka stroja/vozila: 10169, Leather skiving machine Fortuna 50 PU-AG - Skiving width: 0 - 50 mm - Skiving angle: 0° - 20° - Operation: Foot-operated - Feed: Stepless adjustment via clutch - Feed speed: 270, 350, 520, 650 mm/s Hodpoh I Rh Hjfx Altjr - Chip and dust extraction - Motor speed: 1400 rpm - Power supply: 380 V, 3-phase, 50 Hz - Rated output: 0.55 kW - Dimensions (L x W x H): 1050 x 550 x 1160 mm - Weight: approx. 130 kg Online video inspection available via Skype video. We would be pleased to welcome you – more machines in stock. Available immediately – inspections possible. Located in Emskirchen / Nuremberg – test runs available.

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 7811105, Cutting Machine / Guillotine Polar 92 XT Year of Manufacture: 2008 - Serial No. 7811105 Maximum Cutting Width: 920 mm Total Cut Count: 293,000 Cuts Monitor with Programmable Operation Air Table Light Barrier Safety System Side Tables Spare Knife Included Manuals Included Online Video Inspection via Skype Available We welcome your visit — more machines in stock. Hedom U U Ugjpfx Altjr Available Immediately — Inspections Possible Located in Emskirchen / Nuremberg — Testing Possible

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Poljska 1.5 Letnik izdelave 2023 1.6 Delovna napetost 400 V / 50 Hz 1.7 Veriga za žago 14788 (190 cm) 3333 1.8 Vodilna letev 11003322 (190 cm) 3004 1.9 Navodila za uporabo 52270 (27) 2.0 Podatki o rezanem lesu: maksimalna velikost paketov za rezanje: Š = 1200 mm, V = 1200 mm, D = 4200 mm minimalna velikost paketov za rezanje: 2500 mm maksimalna velikost paketov po rezanju: 4 mm Hjdpfx Aljx Dmavstjr minimalna velikost paketov po rezanju: 700 mm maksimalna velikost ostankov (odpadka): 300 mm 2026-04-29 v imenu P. Hörnchen Datum izdaje, avtor 1. Tehnična kartica stroja

Stanje: rabljeno, številka stroja/vozila: 008005, Maksimalna obdelovalna širina: 2440 mm Hodswu Aacepfx Altjr

Stanje: rabljeno, številka stroja/vozila: 007393, Max. working width: 2500 mm Hsdpfswkrqiex Altjr

Stanje: rabljeno, Leto izdelave: 1980, Raddurchmesser - max. 2500 mm Radbreite 0 mm Modul - max. 34 Modul - min. 1 Gesamtleistungsbedarf ca. 15 kW Maschinengewicht ca. 15 t Raumbedarf ca. 4,20 x 2,00 x 2,90 m K L I N G E L N B E R G (Deutschland) Universelle Evolventen- und Schraubenmessmaschine Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____ min./max. Zahnrad-Ø: 250 - 2.500 mm Modulbereich: 1 - 34 Max. Grundkreisdurchmesser: 2.400 mm Messbare Zahnlänge: 500 mm Hub des Messschlittens, ca.: 600 mm Schrägungswinkel: 0 - 45° Werkstücklänge zwischen Spitzen min./max.: 430 - 2.500 mm Werkstück-Ø in Gegenhalter: 1.340 mm Werkstücktisch-Ø: 690 mm Diagrammvergrößerung: 50/100/200/500/1000/2000 : 1 Max. zulässiges Testgewicht des Zahnrads, ca.: 10.000 kg Gesamtanschlussleistung, ca.: 15 kW - 380 V - 50 Hz Maschinengewicht, ca.: 15.000 kg Geeignet für die Messung von Zahnprofil und Zahnflankenverlauf an hochbelastbaren Gerad- und Schrägverzahnungen. Zubehör / Sonderausstattung: * Digitale Einstellung des Grundkreises und digitale Winkelverstellung ohne Grundkreisscheiben. * Längenverstellbare Halterung für Teilungsprüfgerät, jedoch ohne Prüfeinheit. * Schwere Werkstücke können auf der Maschine geprüft werden. Motorisch angetriebene Aufspannung, Ausrichtung und Prüfprozess per Tastendruck. Hjdpjt Hw Aasfx Altjr * Gegenhalter nach hinten schwenkbar zum Beladen von Großzahnrädern und Kettenrädern, diverse weitere Zubehörteile. Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand, daher lohnt sich eine Überholung. Eine Funktionsprüfung unter Strom ist nicht möglich. Teile des Bedienfelds sind nicht vorhanden.

Stanje: zelo dobro (rabljeno), Premer navoja 36 mm Opis sledi! Hedpfoyhq S Eox Altsr

Stanje: rabljeno, Leto izdelave: 1996, Workpiece diameter: 240 mm Distance between centers: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5000 kg Space requirement: approx. [field missing] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year: 1996, #74 105 Min./max. gear diameter: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm Crowning (approx.): 0.5° Workpiece clamping length (approx.): 500 mm Max. workpiece oscillation (approx.): 3,000 mm Honing tool Ø outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight: approx. 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control Type 810 G enables input of all relevant gear data and easy workpiece setup via dialog with the control system. - With DNC interface RS 232 for data import/export. - A-axis = helix angle/Z-axis = table movement/X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning system - With built-in device for automatic threading of the honing wheel into the tooth gap - The tool swivel angle (A-axis) is also moved electronically, quickly and precisely, and hydraulically clamped—this also means faster setup times. - Hydraulic workpiece clamping via foot switch between workpiece headstock and tailstock, both units are adjustable on the workpiece table depending on the part - Complete machining area enclosure with sliding doors and safety interlock - Sophisticated original REISHAUER honing oil conditioning unit Type RTO 40.10, with centrifuge and cooling unit for stable oil temperature, oil mist filter, etc. Hodpot Hwvmefx Alter - Various diamond dressing tools mounted on mandrels - Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Wheel diameter - max. 400 mm Machine weight approx. 4 t O F F E R We can offer you the following, subject to prior sale and error, without obligation, from stock: KLINGELNBERG Single- & Double-Flank Gear Rolling Tester with Structure-Borne Noise Testing Model R 30 Year of manufacture 2007 _____ Workpiece - Outside diameter min. / max. 36 /300 mm Center distance workpiece – master gear 135 - 290 mm Max. spindle speed 3,000 rpm Max. drive torque up to 2196 rpm 20 Nm Max. drive torque 2196 – 3,000 rpm 14.7 Nm Hodpfsxvdryjx Altjr Spindle drive 4.62 kW Total drive power approx. 10 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment • The machine is a universal gear roll testing machine designed for the following test procedures: o Single-flank roll testing o Double-flank roll testing o Structure-borne noise testing in single & double flank contact o Helix testing in double flank contact • WINDOWS PC control for measurement data acquisition and analysis, with NoisyS32 test software • SIEMENS operator panel for machine control and test cycle evaluation • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating manuals • Currently, the “license dongle” for activating the measurement software is unfortunately missing. We hope to still obtain this from the seller. Condition: Very good! Barely used! Coming soon: Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Always a large selection of gear cutting machines in stock – please inquire for your requirements!

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Hedpfst Hw D Rox Altor Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Hsdpfx Aet Hw Hxsltsr Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Hedpfx Aet Hw R Djlter Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1975, Wheel diameter – max. 160 - 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space required approx. ... m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Helix Testing, Type PFSU 1600 Hedpot Hwptefx Altor Year of manufacture 1975, modernised in 1995 #B 2281 Working range: min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Maximum face width: 250 mm Measuring carriage stroke approx.: 300 mm Maximum helix angle: 0 – 90° Maximum centre distance in between centers: approx. 1,150 mm Overhang of the tailstock: 450 mm Chart recorder magnification: 50/250/500/1000 x Maximum test gear weight: approx. 4,000 kg Weight: approx. 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz / Suitable for testing: - Tooth profile (involute) - Tooth direction (helix angle/lead) on internal and external gears, hobs, shaper cutters, worm gears, etc. - Tooth runout, surface roughness - Determination/reconstruction of the base circle and helix angle, etc. Accessories / special equipment: - Optical base circle setting and optical angle setting (no longer using base-circle discs) - High workpiece weight possible due to specific construction, testing sequence motorised or manual via handwheels - Rotatable mounting turntable Ø 480 mm for mounting larger gear blanks, with 2 sets of different extension supports (400 and 470 mm long) for max. gear diameter of 1,600 mm - Counterholder AV 17 for max. workpiece length of 1,150 mm - Separate electrical cabinet for control of manual movements as well as - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German, program update to current version V 21.17, ideal for generating modern test reports with graphics, graphical display on monitor, other subprograms, HP printer, flat screen - Various probe inserts, small parts, height-adjustable mount for a pitch measurement device (rear mounted), leveling feet, etc. - However, pitch measurement device not included. Mounting fixture available and installed at rear. Condition: Very good – ready for demonstration, dismantled and reassembled by specialist.

Stanje: rabljeno, Leto izdelave: 1983, Workpiece diameter: 250 mm Center distance: 0 mm Max. honing length: --- mm Max. module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Type D - 250, Year of manufacture: 1983, Serial No. 31 205.049.22 _____ Wheel diameter: 10 - 250 mm Module: 1 - 5 Hsdpfxjt Hwzpj Altjr Gear length/Table stroke max.: 500 mm Center height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross-slide travel: 270 mm Rapid traverse cross-slide travel: 50 mm Cross-slide feed, mechanical: 1 - 8 mm/Ø Roughing/finishing feed rates: 1-29 / 0.2-2.8 μ/sec Table speed, hydraulic: 0 - 6 m/min Total power: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-selectable machining parameters via counters and switching units for automatic operation, with workpiece counter. - All roughing and finishing feeds via decade switches, as well as potentiometer-adjustable table reverse times and rapid feeds adjustable by time (1 s = 0.04 mm), ampere display, etc. - Capability for barrel and taper honing using templates (also off-center, requires pre-machined workpiece). - Separate honing oil system with magnetic separator and fine filter. - Mechanical tailstocks for manual loading, oil mist separator, sliding doors with foot switch, separately housed hydraulic unit.

Stanje: rabljeno, Leto izdelave: 1980, Wheel diameter - max. 400 mm Wheel width: NA mm Module - max. 5 Module - min. Total power requirement: kW Machine weight approx.: t Hodot Hw Ebspfx Altsr Space requirement approx.: m Manual double-flank gear rolling tester

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Hodpfx Alet Hwxbjtsr Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories