Kellenberger 1000U Bema Aktuell nakup rabljenega (226)

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Pgjdouxfu Nepfx Altop Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter 630 mm Grinding length 600 mm Pedpfx Alev Dxxzstegp Centre height 320 mm Machine equipped with reinforced workpiece spindle headstock for cantilever grinding of heavy workpieces. The machine will undergo major maintenance/partial overhaul including a geometry inspection report according to the Kellenberger new machine guideline. At present, the machine does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). The required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 1000 mm Center height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle head swiveling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported, including clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in Kellenberger overhauls/retrofits, we can not only deliver machines in as-new condition with warranty, but we also offer service for your equipment. Psdpfx Aed Ih Egeltsgp Geometrically refurbished and newly painted according to Kellenberger test protocol. Completely new electrics with new infeed control system. Photos show a previously delivered machine of the same model, but with 1500 mm center distance and a universal grinding head instead of 500 mm wheel head for external cylindrical grinding only. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at additional cost: - Semi-automatic dressing - Dressing compensation - GAP control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table traverse and rapid movement. Powerful, non-swiveling grinding spindle stock for production external cylindrical grinding operations. Application areas: Machining of high-precision components for gear manufacturing, machine tool, and general mechanical engineering. Match grinding for the hydraulics industry. At this time, the machine does not meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety objective must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. Pgedpfxsvq R Uzo Altop The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Pgjdpfx Aljvdk N Eetjp Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic Podpfot Ii Nbex Altsgp - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol. Pjdpfx Aot Ii Rfoltogp

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Generalno obnovljeno leta 2013 Ojačano glavno vreteno obdelovanca Pgjdpfxoxyadaj Altop B-os brezstopenjsko nastavljiva Kontra-vreteno Brez vpenjalne glave in brez lunete na fotografiji Krmiljenje Kelco 90 Stroj je možno pri stranki v obratovanju ogledati do vključno januarja 2026.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, širina na sredini: 600 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 50 mm, odprtina brusnega koluta: 127 mm, Bez cene minimalne – zagotovljena prodaja najvišjemu ponudniku! Motor in frekvenčni pretvornik za obdelovalni vretenasti nasad so bili obnovljeni! Poleg tega sta bila zamenjana električna omarica in električna shema! TEHNIČNI PODATKI Višina središča: 125 mm (175 mm z dvigi) Razdalja med središči: 600 mm Premer brusne plošče: 400 mm Širina brusne plošče: 50 mm Pjdpfxoyu Rd Is Altsgp Notranji premer brusne plošče: 127 mm Kotna nastavitev: 270° Hitrost obdelovalnega vretena: 20–400 min⁻¹ Oprimek vretena: 5 MK Oprimek konjička: 3 MK Zasuk mize: 10° Hitrost mize: do 6,0 m/min PODATKI O STROJU Motor za zunanjo brusno ploščo: 4,0 kW Motor za obdelovalno vreteno: 2,2 kW Dimenzije & Teža Dimenzije (D x Š x V): 2.580 x 1.680 x 1.670 mm Teža stroja pribl.: 2.700 kg OPREMA Nova električna omarica in nova električna shema Nov motor in frekvenčni pretvornik za obdelovalni vretenasti nasad 2-osni digitalni prikazovalnik Hladilni rezervoar Geometrija preverjena po Kellenbergerjevem protokolu Obsežna dodatna oprema

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 320 mm, pomik po osi Z: 1.150 mm, proizvajalec krmilnikov: HEIDENHAIN, skupna masa: 6.000 kg, Ta brusilni stroj KELLENBERGER KEL VARIA RS 175/1000 je bil izdelan leta 2004 v Švici. Opremljen je z upravljalnikom HEIDENHAIN. Pgedpsyi Eliofx Altop Prednosti stroja Kvalitativne prednosti stroja • Dobro stanje Tehnične prednosti stroja • Razdalja med konicama: 1000 mm • Višina konice: 175 mm • Dimenzije desnega brusnega koluta Ø 400 x 50 mm • Pomiki glave brusnega koluta -210°/+30° • Hitrost vrtenja: 8-800 min⁻¹ • Tip vretena: CM5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630005, višina središča: 305 mm, širina na sredini: 1.000 mm, potovalna razdalja osi X: 350 mm, pomik po osi Z: 1.160 mm, model krmilnika: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Z-axis travel: 1,160 mm Pjdpeyhnrvofx Altjgp X-axis travel: 350 mm Maximum workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swivel range: +30° / -190° Maximum grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: MT 5 Tailstock quill taper: 4 MT Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Maximum table inclination: -1° / +11° MACHINE DETAILS Control system: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding attachment without spindle Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand control panel

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Pgsdpfxsw U Ry Ne Altsp Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Grinding Wheel Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings plus adjustment. New paintwork. Workpiece Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal Grinding Attachment Disassembly, cleaning of components, replacement of worn and defective parts, assembly of support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, replacement of hoses, worn and defective parts. Check hydraulic manifold. X Axis Disassembly, replacement of worn components such as O-rings, seals, segments, etc., overhaul of hydraulic cylinder, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor contactors and relay controls. New wiring. New variable frequency drive for workpiece headstock. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance, headstock to overhanging tailstock 1650 mm Centre height, standard 125 mm Centre height with riser block 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with risers 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement, 1 handwheel revolution – coarse 20.006 mm Manual table movement, 1 handwheel revolution – fine 2.457 mm Table speed, stepless, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Workhead Spindle Workpiece speed, stepless electric 20–400 rpm Swivel 360° Internal taper of workhead spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Quill retraction, manual or hydraulic 30 mm Internal taper for diamond dresser MT0 Universal Grinding Head Transversal slide stroke (grinding wheel) 285 mm Rapid traverse of grinding wheel slide, forward and back 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical movement of grinding spindle, centre height 125–330 mm Grinding wheel for cylindrical grinding, max 400x50x127 mm Grinding wheel for surface grinding, max 250x20x76 mm Swivel angle of grinding head, lockable every 90° 270° Wheel feed 1 division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Workhead spindle motor 3,000 rpm / 2.0 hp Coolant pump motor 2,850 rpm / 0.12 hp Pgjdpfxsxt Ilfs Altop Internal Grinding Attachment Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless stated otherwise, technical data is provided without guarantee and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Podpfx Asd Amifsltegp Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 900 mm, TEHNIČNI PODATKI Največja dolžina brušenja: 900 mm Razdalja med centri: 600 mm Višina centrov (standard): 125 mm Višina centrov z vmesnimi bloki na glavi in konjičku: 175 - 250 mm Pgedpfxeytf Tbo Altsp Največji premer nihanja z vmesnimi bloki: 350 - 500 mm Zasuk mize / na vsako stran: 10° Zadrževalni čas pri povratnem gibanju mize: 0 - 5 s Premer / širina / odprtina: 250 x 13 x 76 mm Hitrost vretena brusnega kolesa: 360 min⁻¹ Prečni pomik glave brusnega kolesa: 285 mm Hitro pomikanje glave naprej in nazaj: 40 mm Prekinjeno podajanje na eno obrat mize: 0,001 - 0,03 mm Mikrokorektor podajanja, 1 delitev skale: 0,001 mm Delovne hitrosti brezstopenjsko nastavljive (normalno / posebno): 20 - 400 / 10 - 400 min⁻¹ PODROBNOSTI O STROJU Vrsta krmiljenja: konvencionalna

Stanje: pripravljen za uporabo (rabljen), An older Kellenberger precision cylindrical grinding machine, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, max. workpiece weight: 3 kg, max. workpiece diameter: 245 mm, max. workpiece length: 130 mm. An on-site inspection is possible. Pgsdew Edpgopfx Altop

Stanje: pripravljen za uporabo (rabljen), Na voljo je zunanja cilindrična brusilka Kellenberger. Razdalja med konicama: 1000 mm, višina konice: 175 mm, največji premer obdelovanca: 250 mm, pomik X/Z: 1000 mm/220 mm, premer brusilnega koluta: 500 mm, število vrtljajev: 1530 min⁻¹. Dimenzije stroja X/Y/Z: cca 3000mm/1850mm/1750mm, teža: cca 3150kg. Ogled na lokaciji je možen. Pedpfexxzi Ijx Altogp

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Pressing force: 50 t, Opening dimensions: 870 x 1500 mm, Bale dimensions: 1500 x 1100 x 1100 mm, Bale weight: 450 kg, Length: 1524 mm, Width: 2100 mm, Height: 3217 mm, Weight: 1.93 t, Operating hours: 18 h. Pgjdoirakgepfx Altjp

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, dolžina brušenja: 600 mm, premer brušenja: 249 mm, dolžina elektro omare: 1.200 mm, širina krmilne omare: 40 mm, hitrost vretena za brušenje: 1.530 obr/min, višina krmilne omare: 1.500 mm, skupna masa: 3.250 kg, For sale here is a cylindrical grinding machine from the manufacturer Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Data: Distance between centers: 600 mm Center height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel revolution, coarse/fine: 20/2.5 mm Hydraulic, infinitely variable speed: 0.02–6 m/min Reversal travel, minimum: 1.5 mm Dwell time at reversal, stepless: 0–5 sec Swivel range: 11° Cross slide: Travel with fine/coarse feed handwheel: 220 mm Travel per handwheel revolution, coarse/fine: 4/0.5 mm Rapid feed and return, hydraulic: 50 mm Infeed, electro-mechanical, with stepper motor: 0–9.99 mm/∅ Micro-stop for infeed, per graduation: 1 μm/∅ Plunge grinding: infeed speed coarse/fine: 1–49/0.2–2.8 μm/sec Podpfoyyn Ehox Altogp Grinding spindle headstock: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor power: 5.5 kW Spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle headstock: Swivel range: 360° Speeds, infinitely variable: 20–400 rpm Spindle internal taper: Morse 5 Motor power: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill stroke: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Stanje: rabljeno, Leto izdelave: 1995, Premer cevi 45 mm Debelina stene 2 mm Minimalni radij upogibanja: . mm Teža stroja pribl. 1,7 t Potreben prostor pribl. 5x0,85x1,5 m Pgsdpoyutr Usfx Altsp sn 1765 Dolžina cevi do 4100 Tehnični podatki so podatki proizvajalca oz. uporabnika in zanje ne prevzemamo odgovornosti. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O nas Več kot 400 lastnih strojev na zalogi Več kot 15.000 m² skladiščne površine, dizalična zmogljivost 70 t Več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Več ponudb najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: dober (rabljeno), valjčni brusilni stroj Pedpetrgukofx Altogp

Stanje: dober (rabljeno), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (OD x ID x width): 500 x 80 x 203.2 mm Max. workpiece diameter: 460 mm Tailstock taper: MORSE 4 Workhead spindle taper: MORSE 5 Max. Z-axis travel: 1115 mm Max. X-axis travel: 260 mm Approx. dimensions (L x W): 440 x 370 cm Approx. weight: 4700 kg Pgjdpetrgnzsfx Altjp

Stanje: dober (rabljeno), Distance between centers: 760 mm Maximum Z-axis travel: 650 mm Pgsdjv Tmtlspfx Altep Maximum workpiece length: 430 mm Maximum workpiece diameter: 250 mm Center height: 125 mm Maximum grinding wheel diameter: 500 mm Maximum X-axis travel: 320 mm CNC brand: FANUC CNC model: 18TB Main motor power: 7.5 kW Z and X-axis resolution: 0.1 µm Workhead spindle taper: MORSE 5 Workhead spindle bore diameter: 38 mm Tailstock taper: MORSE 4 Workhead spindle speed range: 8 to 800 rpm Dimensions (length x width): 2500 x 2000 mm Weight: 4700 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina središča: 175 mm, teža obdelovanca (maks.): 180 kg, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, skupna dolžina: 1.150 mm, premer brušenja: 349 mm, The machine is operational and in use at our facility. It is equipped with 2 external diameter and 2 internal grinding units, featuring a C-axis. Pedpfxov Uxris Altsgp

Stanje: rabljeno, središčna višina pri ročični gredi: 125 mm, premer obdelovanca med konicama: 1.300 mm, vrtilni razpon: 9 °, Cilindrični brusilni stroj Kellenberger 51 HU Višina središča: 125 mm Razdalja med konicami: 1200 mm Površina delovne mize: 1590 x 140 mm Brusna površina: 1300 x 200 mm Preklopna pot mize, ročno in avtomatsko: 1300 mm Zasuk mize: 9° Glava držala: Hitrosti, 5 stopenj: 50–400 vrt/min Vrtenje: 360° Notranji stožec: MT5 Kontra držalo: Notranji stožec: MT3 Hod tulec: 18 mm Brusilna glava: Prečni pomik: 320 mm Vrtenje: 360° Hitrost vretena, 3 stopnje: 2000, 2400 in 3650 vrt/min Brusni kolut: 300 x 25 x 127 mm Pgedpexpif Ejfx Altop Motor: 3,5 HP Vgrajen nastavek za notranje brušenje: Hitrost vretena: 14.000 vrt/min Teža stroja: 1950 kg Povprašajte za ponudbo s prevozom!