Stroj za upogibanje cevi

BEMA G45_cn-d

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0518018, Offer 24600 Technical Specifications: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A 60% duty cycle - 360 A 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Interconnecting cable set device – wire feed case 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG welding torch package, water-cooled, approx. 4 m - Earth cable - Pressure reducer - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm Psdpfxsvncfmo Altopw - Weight: approx. 200 kg

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Podpfx Asxacdvsltepw Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Sheet width 3100 mm Sheet thickness 6.0 mm (steel) Pre-bending 4.0 mm (steel) Upper roller diameter 200 mm Side roller diameter 165 mm Lower roller diameter 190 mm Bending speed approx. 5.0 m/min Control system DIGI Oil capacity 80.0 liters Voltage 380 V Total power requirement 6.0 kW Weight 6000 kg Dimensions (L-W-H) 5250 x 1500 x 1400 mm Very good condition (!!) Current new price approx. €85,000 Special price on request Features: - Robust electro-hydraulic 4-roll plate bending machine * 4-roll design offers a wide range of bending and rolling options - MG swiveling control panel * Operation – control of all rollers / machine axes * Digital position display * Manual operation via joysticks - Two central rollers driven directly by hydromotors - Conical rolling possible by tilting the rollers - Side roller parallelism by torsion shafts - Pre-bending on both sides - Diameters up to 1.1 times the upper roller diameter possible - Forged and hardened rollers with a hardness of 53-55 HRC Pedpfox Sr Dfox Altepw - Low-maintenance, stable machine design - Continuous lubrication of all bearings - Sturdy steel welded frame - Electro-hydraulic drop end for easy removal of tubular workpieces - Pressure gauge for rollers - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: zelo dobro (rabljeno), Premer struženja nad ležiščem: 900 mm Premer struženja nad suportom: 600 mm Dolžina struženja: 3000 mm Število vrtljajev vretena: 11,2 - 560 vrt/min Nosilec orodja: Multifix D1 Skupna potrebna moč: 22 kW Teža stroja pribl.: 5,6 t Prostorske zahteve pribl.: 5,6 x 1,8 x 1,7 m Varnostna predelava po CE standardu 2017 Psdpfx Asym D H Teltspw 2011 nova vzdolžna navojna vretena, delno obnovljena menjalna omara, mazanje po notranjem načrtu.

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 885258, Offer 25514 Technical data: - max. working length: 3060 mm - frame gap: 2690 mm - max. press force: 1300 kN - max. distance table/ram: 535 mm - throat depth: 410 mm - ram stroke: 215 mm - stroke speeds: - rapid approach down idle: max. 200 mm/sec - return speed up: 135 mm/sec - pressing speed down: 1 to 11 mm/sec - total drive power: 18 kW - pneumatic connection: 6 bar - required space: approx. W 3800 × H 2700 × D 2400 mm Podpfxsx Ew Dqj Altspw - weight: approx. 11,500 kg - equipped with: - 6-axis CNC control DELEM - two-hand control panel with foot pedal - crowning device - controlled backgauge with height adjustment 5 – 860 mm - hydraulic upper and lower tool clamping - pneumatic matrix table displacement

Stanje: rabljeno, Leto izdelave: 2008, Press force: 180 t Bending length: 3110 mm Distance between uprights: 2600 mm Throat depth: 410 mm Approach speed: 100 mm/sec Working speed: 10.0 mm/sec Return speed: 80.0 mm/sec Backgauge - adjustable max.: 750 mm Stroke: 260 mm Installation height: 460 mm Table height: 880 mm Oil capacity: 210 l Max. operating pressure: 240 bar Control: DELEM Total power requirement: 15.0 kW Machine weight approx.: 11,200 kg Dimensions L-W-H: 4250 x 2000 x 2800 mm Current new price approx.: EUR 85,000 Special price upon request Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control model "DA 66W" * Graphical 2D programming * Automatic bending sequence calculation and collision detection * High-quality LCD display (TFT) Pjdpfx Alsxa Hivjtepw * Swiveling control unit, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electro-motorized backgauge (X axis) * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment of the backgauge (R axis) - CNC electro-motorized table crowning - ROLLERI upper tool adapter (quick-release clamping) * including crowning device in the tool holder - 2x front, movable support arms ("Sliding" system) - Side safety device (swiveling doors) - Rear safety device (sliding door) - 1x free-moving two-hand/foot control - Operating instructions (PDF)

Leto izdelave: 1982, stanje: rabljeno, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Workpiece weight: max. 160 kg Throat depth: 200 mm Interface: RS 232 Input voltage: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Machine dimensions approx. (LxWxH): 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, equipped for depth measurement operation, is offered for sale including a base cabinet (Emco model for hardness testers). The device is suitable for the following test methods (manufacturer specifications): Metals: Brinell, Vickers, Rockwell Plastic testing according to DIN 53 456 Other materials: testing possible only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, strain gauge and DC motor, for M4R-075 = 49 to 7355 N Test table Ø 90 mm, height adjustable via hand wheel Test table mount in accordance with DIN 51 225 = Ø 25 mm Operation and programming via control panel with graphic-capable, illuminated LC display Accessories: Additional test tables/plates as shown in the photos Incl. Pedpfx Asu N Avxsltopw

Stanje: dober (rabljeno), Leto izdelave: 1991, Tlak 300 t Dolžina upogibanja 4100 mm Razdalja med stebri 3710 mm Ppjdpfx Alexab I Tetsw Hod – brezstopenjsko nastavljiv 250 mm Globina vratu 330 mm Vgradna višina 500 mm Višina mize 940 mm Širina mize 250 mm Delovna hitrost 7,0 mm/s Hitrost povratka 90,0 mm/s Upravljanje: klasično Največji delovni tlak 305 bar Napetost 380 V Skupna priključna moč 22,5 kW Teža 25.200 kg Dimenzije D-Š-V 4320 x 2100 x 3370 mm Dobro ohranjeno stanje (!!) - preizkušen stroj - video stroja - ?v=rPOBwTfVReo Oprema: - enostavna, klasična hidravlična upogibna stiskalnica - vrtljiva upravljalna konzola, levo spredaj - elektro-motorni zadnji prislon (os X) * nastavitev preko prednje upravljalne konzole (gumbi) * z analognim prikazom pozicije * fino nastavljanje preko ročnega kolesa spredaj - s 3x prislonskimi prsti, ročno nastavljivi - elektro-motorizirana nastavitev globine (os Y1+Y2) * z analognim prikazom pozicije - 1x deljen komplet zgornjih orodij tipa "Rehfuß" 85° - 1x MultiV univerzalni blok matric z več V-odprtimi - 2x sprednji stabilni odlagalni roki - 1x prosto pomični dvojni nožni pedal - 1x prosto pomična dvoročna upravljalna enota - bočna varnostna oprema (vrtljiva vrata) - zadnja varnostna oprema (drsna vrata) - izvirna uporabniška navodila

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressing force: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance between table and ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor level: 810 mm Total power requirement: 17 kW Ppodpfx Aew D Awmeltew Machine weight approx.: 7200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m

Stanje: rabljeno, Leto izdelave: 1993, številka stroja/vozila: 493187, Ref. No. 21236 Hydraulic 2-column guided mitre metal band saw Technical specifications: - Cutting capacity at 90° round: 360 mm - Cutting capacity at 90° rectangular: 600 x 360 mm - Cutting capacity at 45° round: 320 mm - Mitre adjustment via handwheel - Saw blade dimensions: 5400 x 38 x 1.3 mm - Cutting speed continuously adjustable: 19 - 130 m/min - Cutting pressure continuously adjustable: 0 - 10 m/min - Manual material clamping - Preselection of saw blade lift height - Micro-spray cooling system - Total drive power: 400 V / 8 kW - Required floor space approx.: W 1800 x H 2000 x D 3250 mm Ppedjwqpmnjpfx Altow - Weight approx.: 2200 kg - Infeed and outfeed roller conveyors each approx.: 6000 / 8000 mm