Ima Vortex 75 nakup rabljenega (12.536)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage slides) Dodpfjwbp Nwex Aplekl No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking section Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load: 80 kW

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station Dkedpfx Aefi Tg Heplsl External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: dober (rabljeno), Ponujam industrijsko vertikalno črpalko priznanega nemškega proizvajalca ALLWEILER GmbH – model NLT 50-200. Dkodpfx Apjyxtfwslol Črpalka je namenjena za neprekinjeno obratovanje v industrijskih, vodnih in tehnoloških sistemih. Oprema je popolna z električnim motorjem. Rabljeno stanje – vidni sledovi skladiščenja in rahla površinska korozija. ⚙️ Tehnični podatki proizvajalec: ALLWEILER (Nemčija) tip: NLT 50-200 leto izdelave: 2014 zmogljivost: 75 m³/h črpalna višina: 48 m število vrtljajev: 2900 obr/min moč motorja: 11,6 kW napajanje: 400V (50 Hz) 460V (60 Hz) premer priključka: pribl. 65 mm izvedba: vertikalna (vertical inline pump) ✅ Tehnično stanje črpalka kompletna z motorjem ni vidnih mehanskih poškodb prosto se vrti vizualno stanje kot na slikah (sledovi skladiščenja, površinska rja)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo Vortex D2 Duo – popolnoma avtomatski stroj za kuhanje, ohajanje in hlajenje, zasnovan za neprekinjeno in ponovljivo kuhanje, ohajanje in hlajenje živilskih izdelkov. Ta rešitev vključuje DUO dizajn, kjer je sekcija za kuhanje nameščena na ločenem ogrodju od sekcij za ohajanje in hlajenje, kar zagotavlja zelo visoko stopnjo ločitve med visokotemperaturnimi in nizkotemperaturnimi procesi. Model Vortex D2 Duo je bil razvit predvsem za predelavo kratkih in dolgih testenin, vendar je zaradi izjemne prilagodljivosti idealen tudi za izdelke, kot so riž, rezanci, stročnice, žita, zelenjava, krompir in morski sadeži. Tako je stroj primeren tako za obrate za proizvodnjo testenin kot tudi za proizvodnjo gotovih obrokov ter v sodobnih obratih za priročno hrano in pri proizvajalcih solat ter hlajenih sestavin. Vortex D2 Duo ima zmogljivost od približno 250 kg/h do 4000 kg/h, kar omogoča obdelavo srednje velikih in zelo velikih proizvodnih količin. Stroj je opremljen s programabilnim Vortex sistemom vodnega toka, ki zagotavlja enakomerno kuhanje, ohajanje in hlajenje vsake serije izdelkov. Sistem zmanjšuje zlepljanje, mehanske poškodbe izdelkov in izgube donosa, poleg tega pa izredno učinkovito hlajenje običajno doseže temperaturo izdelka okoli 3°C. Vortex D2 Duo omogoča dovajanje izdelkov s transportnim trakom ali s samodejnim serijskim doziranjem v posode, kar olajša natančen nadzor pretoka in organizacijo procesa. Vibracijski transportni trakovi za odvodnjavanje omogočajo delovanje tako v serijskem kot v neprekinjenem načinu, kar omogoča enostavno prilagoditev proizvodne linije za nadaljnje korake, kot so mešanje, doziranje, pakiranje ali končno hlajenje. Posebno omembo si zaslužijo tudi konstrukcijske rešitve, ki izboljšujejo kakovost procesa in higieno, kot so hidravlično dviganje košare, cevni izmenjevalniki toplote, dvojni preliv za razmaščevanje in posebej oblikovani vodni rezervoarji. Higienska konstrukcija iz nerjavečega jekla in zaščita za pranje sta ključnega pomena v obratih z visokimi higienskimi zahtevami. Ključne prednosti Vortex D2 Duo: Dkedsy Df Nrspfx Aplol - ločena ogrodja za kuharsko in hladilno sekcijo, - visokokakovostna ločitev visokotemperaturnih in nizkotemperaturnih procesov, - idealen za kratke in dolge testenine, riž, zelenjavo, krompir, žita, stročnice ter morske sadeže, - zmogljivost do 4000 kg/h, odvisno od konfiguracije, - programabilen Vortex sistem pretoka vode, - zelo učinkovito hlajenje izdelka na približno 3°C, - možnost serijskega in neprekinjenega delovanja, - hidravlično dviganje košare in visoko učinkovit odvod, - higiensko, industrijsko oblikovanje za neprekinjeno uporabo. Vortex D2 Duo je napredna proizvodna linija za proizvajalce, ki potrebujejo dosledno kuhanje, hitro hlajenje, visoko produktivnost in odlično končno kakovost izdelkov v sodobnih procesih proizvodnje testenin in priročne hrane.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), I am selling a stacking / destacking unit MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of manufacture 2011. Dsdpfoh Hp Dtjx Aplskl Stacking unit with single-side guidance; also suitable for pallets. Vacuum system (with pump) Rotating head Automatic loading Infeed table with motorized roller system Outfeed table at floor level with lifting mechanism (motorized roller system) Front outfeed table with roller system Outfeed roller conveyor station for stacked material Complete safety fencing included! Operating capacity: approx. 16 cycles per minute Panel height: 10 – 50 mm Min. panel dimensions: 250 x 320 mm Max. panel dimensions: 1300 x 3000 mm Overall footprint: L. 10,200 mm x W. 8,700 mm Total connected load: 45 kW Year of manufacture: 2011 Available immediately. Ready for operation and possible to inspect. Comes with CE certificate and full documentation.

Stanje: novo, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 157,5 kW (214,14 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 820 kg, vhodna napetost: 400 V, skupna širina: 1.000 mm, skupna dolžina: 1.600 mm, skupna višina: 1.950 mm, trajanje garancije: 6 meseci, ogrevalna zmogljivost: 175 kW (237,93 KM), Vodno hlajen hladilni agregat / toplotna črpalka Climaveneta NX W Y H 0502 157,5 kW/175 kW Hladilna moč: 157,5 kW / 44,78 ton (12/7 — 35°C) Grevalna moč: 175 kW / 49,76 ton (40/45 — 7°C) Leto izdelave: 2019 Oprema: Toplotna črpalka Hladilni krog: 1 kos Izmenjevalnik toplote: Ploščni Kompresorji: 2 kosa Bitzer GSD80295VLB4-2 (scroll) Vrsta hladiva: R454B Dimenzije: 1,6 x 1 x 1,95 m Teža: 820 kg Delovne ure: 59/80 h Stanje: Outlet STANJE, TESTIRANJE IN PRIPRAVLJENOST Hladilni agregat / Kaltwassersatz / opravi sedem stopenj tehničnega pregleda in preverjanja delovnih parametrov. Preizkušen je tudi na naši lastni testni postaji, z možnostjo priklopa na vodo (ali glikol) ter nastavitvijo parametrov skladno z vašimi zahtevami. Po testiranju prejmete podrobno poročilo o zmogljivosti in splošnem stanju naprave. Hladilni agregat / Kaltwassersatz / je pripravljen za transport in zagon. Naši inženirji vam pomagajo pri preračunu hladilne zmogljivosti, izbiri ustreznega hladilnega sistema ter konfiguraciji zahtevane opreme. GARANCIJA IN PODPORA Dkedpfx Aov Nkbxeplel Kakovost opreme je potrjena z garancijo v obsegu od 6 do 36 mesecev. LOGISTIKA - Možnost dostave po vsem svetu - Pomoč pri nakladanju, izvozni dokumentaciji in logistični koordinaciji Za podrobno svetovanje nas kontaktirajte. Fotografije, videoposnetki in celotno testno poročilo so na voljo takoj na zahtevo.

Stanje: rabljeno, prevoženi kilometri: 285.364 km, moč: 552 kW (750,51 KM), prva registracija: 07/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, Volvo FH 16-750 4x2 Globetrotter Tractor Unit VIN: B911711 Chassis / Attachments: * Wheelbase: 3,800 mm * Full air suspension * Tyres: Front 385/65 R22.5, Rear 315/70 R22.5 * Tread depth remaining: Front approx. 50%, Rear approx. 50% * 1 x aluminium tank * 1 x AdBlue tank * 1 x Oplima hydraulic oil tank 200 L * Rolappe hydraulic system Cab: * Globetrotter * Roof bar with 4 spotlights * 2 x beacon lights * 2 x air horns * Trux Offroad bullbar * 2 beds * Refrigerator * Automatic climate control * I-PARK COOL / stationary air conditioning * Electric sunroof * Auxiliary heater * Volvo radio * Aux, USB, Bluetooth * Emergency brake assist * ACC = Adaptive Cruise Control * Lane Keep Assist * DAB = Driver Alert System * Side turn assist camera / Volvo AAS Engine / Transmission: * 16,123 cc // 750 hp / 552 kW // EURO 6c * VEB+ * I-Shift / Automatic gearbox * Differential lock * PTO (power take-off) Weights: Dedpfxeyy Ekzj Apljkl * Gross vehicle weight: 18,000 kg * Unladen weight: 8,337 kg * Payload: 9,663 kg Other: * German vehicle * Technical inspection (HU) and safety inspection (SP) until 10/ * New inspection available on request * 1 previous owner ---- New main inspections, safety inspections or weight downgrades/upgrades possible on request. We are happy to assist with obtaining export/transfer licence plates, and we can also arrange transfer of your purchased vehicles within Germany. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing & typographical errors. Subject to changes, prior sale, and errors! --- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, you will find a wide variety of vehicles. Our corporate philosophy stands for fairness and reliability. Customer satisfaction is especially important to us, so we offer excellent all-round service and provide you with a knowledgeable contact person to assist you throughout the purchase or sale of your vehicles. See for yourself! Our Services for You: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to support you in organising special transport services. Temporary plates / export plates We are happy to help you obtain export or temporary licence plates. Handling customs formalities We are happy to assist you with handling customs procedures.

Stanje: rabljeno, prevoženi kilometri: 285.364 km, moč: 552 kW (750,51 KM), prva registracija: 07/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, Volvo FH 16-750 4x2 Globetrotter Tractor Unit VIN: B911711 Chassis / Attachments: * Wheelbase: 3800 mm * Full / air suspension * Tyres: Front 385/65 R22.5, Rear 315/70 R22.5 * Tread depth remaining: Front approx. 50%, Rear approx. 50% * 1 x aluminium fuel tank * 1 x AdBlue tank * 1 x Oplima hydraulic tank 200 L * Rolappe hydraulic system Cab: * Globetrotter * Light bar with 4 headlights * 2 x rotating beacons * 2 x air horns * Trux offroad bull bar * 2 bunks * Fridge * Automatic climate control * I-PARK COOL / parking air conditioning * Electric sunroof * Auxiliary heater * Volvo radio * AUX, USB, Bluetooth * Emergency brake assistant * ACC = Adaptive cruise control * Lane keeping assist * DAB = Driver alert system * Turn assist camera / Volvo AAS Engine / Transmission: * 16,123 cc // 750 hp / 552 kW // EURO 6c * VEB+ * I-Shift / automatic * Differential lock * PTO Weights: * Gross weight: 18,000 kg * Unladen weight: 8,337 kg * Payload: 9,663 kg Other: * German vehicle * Inspected (HU) & safety inspection (SP) 10 / * New inspection possible * 1 previous owner ---- New main inspections, safety checks or weight reductions/increases can be arranged on request. We are happy to assist you in obtaining export/transit number plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak German, English, and Russian! ---- No liability for typos or factual errors; subject to change, prior sale, and error! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sales of new and used commercial vehicles. On 11,000 m², a wide selection of vehicles can be found. Our company philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles Dkjdpfx Aoyy Ekueplsl We are happy to help you with loading your purchased vehicles. Arranging special transports We are happy to assist you in arranging special transports. Day registration / Export plates We are happy to help you obtain export or short-term license plates. Customs formalities We are happy to assist you in handling customs formalities.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT Dsdpsyttrxofx Aplekl EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, IMA BIMA CUT Delovno območje (pomiki osi) • Os X: pribl. 3300 mm • Os Y: pribl. 1450 mm • Število osi: 3 (tipično X, Y, Z) Vreteno Dsdeyzc Nkopfx Aplokl • Moč vretena: pribl. 18 kW in 12 kW • Namen: rezkanje, vrtanje, gnezdenje plošč, obrobljanje ukrivljenih linij Magazin orodij • Avtomatska menjava orodij (ATC): do 18 pozicij Sistem vpenjanja materiala • Vakuumska miza z nosilci in sesalnimi čašicami, samodejno nastavljivimi 🛠️ Funkcije in oprema (tipične) • Vrtanje z 5 strani (zgoraj + stranice X+/X−/Y+/Y−) • Agregat žage za rezanje in utore • Opcijski horizontalni rezkalni agregat (HBO) • Avtomatska miza za nakladanje in razkladanje (odvisno od konfiguracije) • Nesting sistem (razrez plošč z istočasno obdelavo) • Avtomatsko mazanje • Transport odpadkov in ostružkov (trak)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 70004, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Tehnične specifikacije Dimenzije - dolžina: 9,8 m - širina: 1,5 m - višina: 1,8 m Moč motorja: 40 kW Djdpoyzc Igjfx Aplekl Oprema - pomična hitrost: 6 - 30 m/min - debelina plošče: min. 8 mm, maks. 60 mm - širina plošč (z robom): min. 65 mm (pri debelini roba 0,4 - 3 mm) - dolžina plošče: min. 150 mm - višina roba: min. 14 mm, maks. 65 mm - debelina roba: min. 0,4 mm, maks. 20 mm

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) Dkedpfxjun N Dlj Apljl C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Dksdowz Ic Ajpfx Aplsl Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Djdeunrwnepfx Aplokl Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors operating at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a roll diameter of up to 850 mm, it is ideal for precise edge banding applications. Take advantage of this opportunity to purchase the IMA NOVIMAT I /G80/390/R3 edge banding machine. Contact us for further information about this machine. Additional information: Dedpfx Apsx D Nh Aolokl • Motor power: 2 x 4.5 kW, 150 Hz • Motor speed: 9,000 rpm • Power supply: 230 V • Heating capacity: 6 x 500 watts • Adjustment range: Vertical approx. 17 mm, horizontal approx. 30 mm • Stroke: max. 8 mm • Roll diameter: max. 850 mm • Edge height: 14 - 65 mm • Workpiece overhang: min. 30 mm + edge thickness, max. 80 mm including edge thickness • Workpiece length: min. 130 mm • Workpiece gap: min. 300 mm • Workpiece distance: min. 990 mm • Workpiece thickness: min. 8 mm, min. 12 mm with tracing wheel, max. 80 mm • Single tracing workpiece overhang: min. 30 mm • Double tracing system workpiece overhang: min. 38 mm for max. 4 profiles, max. 50 mm • Cutterhead diameter: 125 mm • Motor shaft: 30 x 68 mm diameter • Internal thread: M16, depending on motor, left or right • Cutting cross-section motor power: 0.20 kW, 200 Hz, 400 V, 12,000 rpm for max. 195 mm², option: 0.66 kW, expandable up to max. 1,100 mm² • Tool diameter: 160 mm / 48 teeth • Swivel range: 0 and 25 degrees • Workpiece feed speed: max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge protrusion: upper edge, max. 3 mm; lower edge, max. 2 mm for straight edges • Edge material: max. 4 mm for wood and plastic; aluminium, max. 3 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine offers a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control unit, it supports both coil and strip edging materials. Ideal for high-throughput environments requiring flexibility and reliability in edge processing. Contact us for further information about this machine. Additional Equipment • Hot-melt glue application unit: Single roll/strip magazine for coil material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable from 0° to +25° Machine Advantages Technical Machine Advantages • Min. infeed width: 244 mm (for longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Dodpfx Apox D I D Aolokl Additional Information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough milling unit: 80 kW motor, 6,000 rpm Double milling unit: 2 motors, each 45 kW, 9,000 rpm Flush milling unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool change for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm Dsdpex U U Dtjfx Apljkl 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 24205, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 4.800 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 100 mm, dolžina obdelovanca (maks.): 4.800 mm, širina obdelovanca (maks.): 1.800 mm, število mest v zalogovniku orodij: 18, skupna masa: 16.000 kg, moč vretenovega motorja: 12.000 W, število vreten: 1, premer obdelovanca (maks.): 1.800 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Izjemen stroj z izjemno kakovostnim izhodom. Stroj je bil servisiran s strani IMA serviserjev, uporabljeni so bili originalni rezervni deli. Optični kabel ter večina cevi za stisnjen zrak sta bila zamenjana z novimi. Avtomatsko pozicioniranje vakuumskih prijemal bistveno pospeši čas nastavitve. ImaWoop verzija 6.0 s funkcijo Quicktool dodatno olajša delo operaterja. Vabljeni, da si kadarkoli osebno ogledate delovanje stroja. Prav tako je možno vsak čas spremljati delovanje stroja preko video povezave v živo. CNC portalni obdelovalni center proizvajalec: IMA tip: BIMA P 480 V, 180/480 leto izdelave: 2001 Kratek opis Stroj zmore številne zahtevne naloge (rezkanje, vrtanje, razrez, lepljenje robov, različno kotno rezanje) - izmenično obdelovanje - X = 2 x 2.400 mm, Y = 1.800 mm - glavni vreteno 12 kW - 18-pozicijski menjalec orodij - lepilna enota s 6-pozicijskim zalogovnikom za kolute Opis Delovno območje: z osnovnimi enotami Y = 1.800 mm menjalna miza za izmenično obdelavo: X = 2 x 2.400 mm (rezkanje in vrtanje) X = 2 x 2.100 mm (lepljenje) CNC linijski krmilnik IMATRONIC NT 231 Programska oprema Imawoop 6.0 Avtomatsko pozicioniranje vakuumskih prijemal Avtomatsko mazanje Transportni trak za odpadke in ostružke (trakasti) Glavni vreteno 12 kW z integrirano C-osjo, 360 stopinj Avtomatski menjalec orodij/priključnih enot, 18-kratni 1 enota za lepljenje robov VT100 z enoto za nanašanje lepila Debelina roba: 0,4–3 mm za 4-stransko in obodno lepljenje z ravnim stikom 6-pozicijski zalogovnik kolutov Dksdpfx Aett Rpwepljl 1 enota za končno obrezovanje 0,8 kW Vključeni priključki: - žaga s fiksnim kotom 90° - horizontalna vrtalna enota s 4 izhodi - enota za obdelavo ABS robov - enota za zaobljanje in vodoravni strgalnik ABS robov Drugi priključki in orodja so na voljo proti doplačilu Transportni trak za odsesavanje odpadkov Klimatska naprava v elektro omari

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Dimenzije mize X/Y: 900mm/350mm, dimenzije magneta X/Y: 600mm/350mm, največja višina obdelovanca: 375mm, največja obremenitev mize: 300kg. Dimenzije stroja X/Y/Z: 3200mm/2600mm/2400mm, teža: ca. 400kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dodpfx Aeyxgrqsplekl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Dksdpfxsv T R Ers Aplol Edge material: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Speed: 18,000 rpm End trimming unit Milling units Profile scraping knives Buffing unit Flat scraping knives

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Območje hitrosti vretena: 8000–24000 Število osi: 3 Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Uporaba CNC obdelava lesa Dksdpfx Apex D Rt Hjlsl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: omejena funkcionalnost, IMA postforming machine, year 1999 The hotmelt adhesive units for surface and corner bonding are not included. The machine offered is being sold as a used unit. Sale is made excluding any liability for material defects. The machine is sold as inspected, with all warranties excluded. The seller assumes no guarantee for the functionality, performance, or suitability for any specific purpose. Disclaimer Dodpfx Aoywfifspljkl Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and cost. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest with the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information regarding the machine (e.g. year of construction, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Stanje: rabljeno, številka stroja/vozila: 007842, Delovno območje os X: 5000 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 64 mm Dodpfx Apsyhbiujlskl Število vrtalnih vreten: 14 Število mest za orodja: 18

Stanje: rabljeno, številka stroja/vozila: 007841, Delovno območje os X: 4200 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 64 mm Število mest za orodje: 18 Dkodpfxoyg Ef Dj Aplel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, višina plošče: 50 mm, Iz zaprtja podjetja Tip: IMA Compact 309 C Leto izdelave: 1992 Dodpfx Ajx Avcdjplekl Za rolo materiale in letve do 9 mm debeline - Lepljenje s talilnim lepilom v granulatu - Obrezovanje - Žaganje - Poravnava s frezanjem - Strgala in poliranje Plačilo v gotovini ob prevzemu. Zasebna prodaja – brez garancije.