Hladilnik

New Industrial Сhiller / Heat pump Climaveneta 157.5/175 kW | With warranty

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Teža: 4950 kg, skupna masa: 12 000 kg 5,5 kW Gedpfx Agjwpmckjwoip

Stanje: dober (rabljeno), WEBER pipe extrusion line including: Giedpfxovryhyj Agwjp WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 1.522 h, Znamka: Husmann Gsdpfx Agoxbpr Aewjip Tip: SPB 22 SEN-E Leto izdelave: 2006 Prostornina: 22 m³ Izpustna vrata: zgoraj obešena Priklop: kavelj spredaj

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 15.000 h, Stopnja kompresorja Atlas Copco po obnovi. Giedpfx Agomzbdwswjp

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Gedpohy Tp Dsfx Agweip Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3063, Rabljeni laboratorijski dvo-vijačni ekstruder Leistritz Micro27/GL-32D, stroj št. 3063 Kataloška št.: DS27 št. 3063 Leto izdelave: 2001 Moč motorja: 10,5 kW Hitrost vrtenja vijakov do 500 obr./min Premer vijakov: 27 mm Ogrevalno/hladilne cone: 7 Območje orodij: 1 Sovrteča dvoja vijaka s gnetilnimi elementi Gsdpfsyc Sfpox Agwoip Vijačni elementi so v dobrem stanju. Volumetrično doziranje Brabender, nameščeno na menjalnik in vključeno v dobavo. Dokumentacija v nemškem jeziku na papirju je na voljo. Glava orodja z eno-luknjasto šobo vključena Z atmosferskim odzračevalnim sistemom

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Giodpsg Ezarofx Agwop Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: novo, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor cutting circle: 580 mm each Rotor design: 5 and 6 cutting teeth Gjdpfebq St Hsx Agwjip Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen flap locking system for foreign material discharge Weight: approx. 18,500 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances: X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle: Taper: SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions: Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot spacing (center-to-center): 125 mm Number of T-slots (standard): 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B-axis): Table: 1,626 mm x 813 mm Clamping surface diameter: 762 mm Gjdev N Di Aepfx Agweip Rotation range: 360° Max. workpiece swing diameter: 1,270 mm Table load: 4,536 kg Max. rated power: 3.7 kW Continuous rotation torque: 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for cutting (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for cutting in X, Y, Z axes: 12.7 m/min Rapid traverse (X): 15.2 m/min Rapid traverse (Y): 15.2 m/min Rapid traverse (Z): 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (all positions filled): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General specifications: Coolant tank capacity: 360 L Dimensions: Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608 kg

Leto izdelave: 2025, stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. Godpoiklxbefx Agwjip The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Feel free to contact us.