Ima Advantage 310 nakup rabljenega (13.405)

Stanje: dober (rabljeno), FS Frank Schäffler Rabljenih strojev Ponujate: blagovno znamko – upogljalni stroj, vrhunskega in priznanega proizvajalca – Schechtl Lastnosti stroja: Upogljalni stroj Schechtl HA Tir upogiba čist – možnost preizkusa Kazalnik stopnje Dolžina upogiba približno 310 cm Debelina pločevine do 1,5 mm – jeklo, aluminij, cink itd. Standardni tir Noga za pritrditev Podstavek za pločevino Po želji je mogoče dodati strojno škarjo s tirjem – potrebno jo je naročiti novo Hsdpfx Ajz I Txwsb Eefn Cenik iz leta 2024 – neto – zdaj so cene bistveno višje Pomembno! Po želji lahko kupite številne stroje in dodatno opremo, kot so različni tirji, omejevalnik globine – vse, kar je potrebno za obdelavo pločevine in jekla, vključno z upogljalnimi stroji, stroji za rezanje pločevin, vrtalnimi stroji, stroji za okroglo obdelavo, stroji za rezanje in profiliranje – dodatna oprema (naprava za valjanje robov, okrogli valji za proizvodnjo žlebov, zadnji omejevalnik itd.), pa tudi druga ročna orodja in rezervni deli, ki so na zalogi pri številnih vrhunskih proizvajalcih v naši trgovini. Za vprašanja sem vedno na voljo. Dobite račun z navedeno stopnjo DDV. Možno je brezplačno natovarjanje – teža približno 2000 kg. Ogled in preizkus sta možna in priporočljiva po predhodnem dogovoru po telefonu. Plačilo v gotovini ob prevzemu. Izkoristite naše izkušnje in strokovno znanje, z veseljem vam svetujemo. Kupc prevzame stroj sam (ali s pomočjo špedicije, ki jo najame). Prejem stroja naj bi se zgodil v 10 dneh po koncu dražbe. Lokacija: 97249 Eisingen, približno 3 minute od avtocest A3 in A81. Številka artikla: upogljalni stroj HA 310

Stanje: rabljeno, številka stroja/vozila: 007840, Tip nameščene obrobe: tanka obroba, močna obroba Hsdpeyg Eg Iofx Ab Ejfn Lepilni sistem: PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 8 št.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Hfedpfeyttrxex Ab Ejn Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: zelo dobro (rabljeno), Ponujam v prodajo profesionalni laboratorijski napajalnik BEHA NG 310 P10 (UNIWATT), namenjen servisnim, laboratorijskim, izobraževalnim in testnim aplikacijam za elektronske naprave. Naprava je bila preverjena in je v popolnoma delujočem stanju. Opremljena je z dvema neodvisno nastavljivima izhodoma 0–30 V / 3 A ter dodatnim stabiliziranim izhodom 5 V / 3 A DC. Napajalnik ima digitalne zaslone in možnost merjenja napetosti in toka. Hfodez Snqljpfx Ab Ejn Ohišje ima normalne znake uporabe, ki so vidni na slikah. Prodaja se točno v stanju, kot je prikazano na fotografijah. Tehnični podatki: • Proizvajalec: CH. BEHA GmbH • Model: NG 310 P10 • Napetost napajanja: 230 V AC, 50/60 Hz • Poraba toka: 2,2 A • Izhodi: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Merilni vhod: 0–100 V DC • Digitalni indikatorji napetosti in toka • Kataloška številka: FW031003300D • Država proizvodnje: Nemčija Stanje: • Uporabljen • Preverjen – popolnoma delujoč • Normalni znaki uporabe • Prodaja se v stanju, kot je na slikah Robusten, visokokakovosten laboratorijski napajalnik priznanega nemškega podjetja BEHA, idealen za servise elektronskih naprav, delavnice, laboratorije, šole in raziskovalno-razvojna dela. Zahvaljujoč dvema neodvisnima, nastavljivima kanaloma in dodatnemu izhodu 5 V je idealen za testiranje, napajanje in zagon elektronskih vezij.

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Hfsdpjyyb Sujfx Ab Een Consisting of the following machines: A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.

Stanje: rabljeno, številka stroja/vozila: 005854, Tip pritrjene obrobe: tanka obroba, močna obroba Hfodpfxsv Hinxo Ab Een Sistem lepljenja: EVA Multifunkcijska enota: da Stroji za lepljenje obrob: stroj 1 in 2 Maks. širina panela: 3300 mm Maks. podajalna hitrost: 30 m/min Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 11 kos

Stanje: rabljeno, skupna višina: 2.200 mm, skupna dolžina: 7.500 mm, skupna širina: 1.500 mm, Leto izdelave: 2007 Teža: 4.000 kg Hfsdpfx Abjyzp Ake Eon - Leto izdelave: 2007 - CE-oznaka: Da - Serijska številka: - Število enot [kos]: 7 - 1. tip enote: Predhodna obdelovalna enota - Oprema: Da - 2. tip enote: Enota za nanašanje lepila - 3. tip enote: Tlačna valja - Oprema: Da - 4. tip enote: Enota za obrezovanje - Oprema: Da - 5. tip enote: Groba obdelovalna enota - Oprema: Da - 6. tip enote: - Oprema: Ne - 7. tip enote: Enota za gladko obdelavo - Oprema: Da - 8. tip enote: Enota s ščetkami - Oprema: Da - Napetost [V]: 400 - Poraba električnega toka [A]: 46 - Varovalka [A]: 63 - Dimenzije za transport: 7500 mm x 1500 mm x 2200 mm (d x š x v) - Teža za transport [kg]: 4000 kg Finančne informacije DDV: Navedena cena je brez DDV DDV/davčna obravnava: Podjetja lahko odbijejo DDV Dobava in odkup je možen kadar koli za vse iz industrijskega sektorja Yorick Diebels

Stanje: zelo dobro (rabljeno), One-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips/lippings (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control ICOS open TS Hodoflc Uhepfx Ab Ejfn Feed speed m/min (adjustable) 4 - 20 Upper pressure with V-belt drive Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (Hot Melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-functional unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Hfjdpfx Asw A Ruqeb Ejn Automatic tool changer (rotary magazine) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Packaging capacity: 100 cups/min, packaging layouts: 2x3x2 / 2x5x2, product dimensions X/Y/Z: 41mm / 133mm / 98mm, max. product tolerance: +/-1.5mm, infeed and outfeed height: 860mm / 1060mm, infeed and outfeed adjustment: +/-50mm, operating hours: 64,016 h. Documentation available. An on-site inspection is possible. Hjdpfswqqv Rsx Ab Esfn

Stanje: zelo dobro (rabljeno), RAIMANN KS 310 BV Multi-Blade Edging Saw - Year of manufacture: 1995 - Made in Germany - Technical documentation available - Two adjustable saw blades TECHNICAL SPECIFICATIONS: - Conveyor width: 340 mm - Maximum cutting height: 120 mm - Main motor power: 30 kW - Blade diameters: 250/360 mm - Possibility to mount a pressure shoe - Electric height adjustment - Continuously variable feed speed: 11–38 m/min - Feed motor power: 1.5 kW - Two adjustable saw blades - Three laser guides - Maximum workpiece width: 1000 mm - Minimum workpiece length: 600 mm (with pressure shoe: 400 mm) - Four upper pressure rollers - Spindle diameter: 65 mm - Bushing diameter: 80 mm - Extraction port diameter: 250 mm Hfedpjir Eubofx Ab Eon Dimensions: 230 x 220 x 230 cm Weight: 2500 kg

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Hodpfx Abei Hn Sro Eefn Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Hfedpsltmnlsfx Ab Ejn Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Hfodpfx Abjifnzdo Ejn Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: rabljeno, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support plate for positioning suction cups. Suction cups can be manually positioned on the work surface using a laser indicator. No. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles arranged as follows: * 11 vertical on the X-axis * 10 vertical on the Y-axis. Edge banding unit with glue pot and pre-melter for EVA glue (new glue pot as of 2023). Nordson pre-melter for PUR bonding on folding panels. No. 1 trimming unit (end trimmer). No. 1 milling unit. No. 1 cross-unit with 4 horizontal drilling lines. No. 1 blowing unit. Edge storage unit with 2 positions. Front carpet protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS TO BE VERIFIED. Hfjdpfx Abew El Nhj Esn

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge Thickness in Rolls (min/max) mm: 0.3 / 3 Edge Thickness in Strips (min/max) mm: 3 / 12 Panel Thickness (min/max) mm: 8 / 60 Control: ICOS open TS Feed Speed m/min (adjustable): 4 - 20 Top Pressure: V-belt driven Spraying Unit (for liquid anti-adhesive) Adjustable Fence, CNC controlled Jointing Milling Unit 08.379 (2 x 4.0 kW) Gluing Unit (Hot Melt Adhesive & PUR Glue) 283.1513 Pressure Zone for Edges (CNC-controlled) Edge Magazine for Rolls (compartment no.): 1 Hfedpfx Abod Nt N Ho Eon End Trimming Unit 08.415 (2 x 0.66 kW) Pre-Milling Unit 08.055 (2 x 1.0 kW) Form Milling Unit (Copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile Scraper Unit 08.519 Flat Scraper Unit 08.521 Buffing Unit 08.617-2 (2 x 0.18 kW) Universal Milling Unit for Grooving/Rabbetting and Profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed Table 65.152 (mm 500 x 500) The Return Conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Hfodpfx Asd Rcigeb Esn Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: zelo dobro (rabljeno), Dvostranska samostojna obdelovalna enota (ali 1. in/ali 2. enota na obdelovalni liniji) Material v zvitkih (robovi), debelina (min/maks) mm 0,3 / 3 Debelina robov v letev/trakovih (min/maks) maks. mm 1,0 Hodpewz Ic Asfx Ab Esfn Debelina plošč (min/maks) mm 8 / 45 (60) Delovna širina (min/maks) mm 236 (266) / 3300 Nadzor/programska oprema ICOS Open (na platformi Windows) Hitrost podajanja (nastavljiva) m/min 10 - 50 Zaščitne in zvočno izolirane kabine ENOTA ZA OBRABO ROBOV (za vsako stran): Zaščitni rezalnik (za obdelavo robov) 75.186 (1 x moč 4,4 kW) Agregat za obdelavo (2 x moč 6,6 kW) + prosti prostor ENOTA ZA NANOS LEPIL (za vsako stran): Grelec, za segrevanje obdelovancev Agregat za nanašanje lepila (vročo lepilno maso) 04.1570 Območje za pritisk + rezervoar za robove (št. pozicije) 2 Agregat za obrezovanje 08.42 (2 x moč 0,66 kW) 30 m/min (0°-25°) Agregat za predobdelavo robov 08.0555 (1 x moč 0,66 kW) Multifunkcijski agregat (za obdelavo s krožnim in profilnim rezalnikom) MFA 08.342 (2x moč 0,66 kW), SERVO, maks. 20 m/min Agregat za obdelavo s profilirnimi rezalniki 08.519 Agregat za obdelavo s ravnim rezalnikom 08.50 Agregat za škropljenje (za polirno tekočino) Agregat za nanašanje premaza 08.617-2 (2 x moč 0,18 kW) Univerzalni agregat za utore/faze in profiliranje: 75.30 (2 x moč 4,4 kW) OPCIJA: Samodejni sistem za povratno gibanje

Stanje: rabljeno, obnovljena linija za obdelavo robov za robove debeline 3 mm Proizvajalec: IMA Tip: Combima sestavljena iz: Stroj 1: rabljen avtomat za obdelavo robov proizvajalca IMA, tip COMBIMA Obnovljen v tovarni z 12-mesečno garancijo - delovna širina maks. 1.500 mm, debelina robov pribl. 0,3 - 3 mm - valjčna veriga z igličnimi ležaji, pogon z motorjem 3 kW, brezstopenjsko nastavljiva od 9 - 45 m/min - motorni sistem za nastavitev širine z elektronskim prikazom želene in dejanske vrednosti - dvojna obdelovalna enota z 2 motorjema 4,4 kW, 100 Hz - rezalna enota z 1 motorjem 4,4 kW, 100 Hz - enota za nanašanje taljenega lepila z dvojnim valjčnim magazinom in avtomatskim sistemom za doziranje taljenega lepila (Quickmelt) - enota za obrezovanje z 2 motorjema 0,4 kW - predrezalna in izravnalna enota z 2 motorjema 1,5 kW - enota za obdelavo faz z 2 motorjema 0,6 kW - enota za obdelavo profilov z vlečnimi rezili - enota za obdelavo ravnih profilov z vlečnimi rezili - enota za brušenje/poliranje robov - upravljalni sistem Beckhoff z zaslonom - elektronski pretvornik 100 Hz, proizvajalec KEB - elektronski pretvornik 200 Hz, proizvajalec KEB - 1 rabljena rotacijska enota za prehod iz vzdolžne v prečno orientacijo Hfsdpozuyqvjfx Ab Ejn - Obnovljen v tovarni z 12-mesečno garancijo - maks. dolžina plošče 2.500 mm, maks. širina plošče 1.500 mm Stroj 2: rabljen avtomat za obdelavo robov, proizvajalec IMA, tip COMBIMA Obnovljen v tovarni z 12-mesečno garancijo - delovna širina maks. 3.000 mm, debelina robov pribl. 0,3 - 3 mm - valjčna veriga z igličnimi ležaji, pogon z motorjem 3 kW, brezstopenjsko nastavljiva od 9 - 45 m/min - motorni sistem za nastavitev širine z elektronskim prikazom želene in dejanske vrednosti - zaščitna rezalna enota z motorjem 3,3 kW, 100 Hz - dvojna obdelovalna enota z 2 motorjema 4,4 kW, 100 Hz - zaprta enota za nanašanje lepila z dvojnim valjčnim magazinom in avtomatskim sistemom za doziranje taljenega lepila (Quickmelt) - enota za obrezovanje z 2 motorjema 0,4 kW - predrezalna in izravnalna enota z 1 zgornjim in 1 spodnjim motorjem 0,4 kW - enota za obdelavo faz z 2 motorjema 0,4 kW - enota za obdelavo profilov s kopirnimi rezili z 2 motorjema 150 W - za odstranjevanje prevelikih robov na sprednjih in zadnjih spodnjih profilih delovcev, enota za obdelavo profilov s kopirnimi rezili z 2 motorjema 150 W - za odstranjevanje prevelikih robov na sprednjih in zadnjih zgornjih profilih delovcev, enota za obdelavo profilov z vlečnimi rezili - vlečno rezilo za ravne profile - enota za poliranje robov - središčna opora - izvlečni elementi 800 mm - upravljalni sistem Beckhoff z zaslonom - elektronski pretvornik 100 Hz, proizvajalec KEB - elektronski pretvornik 200 Hz, proizvajalec KEB Dobavni rok po oddaji naročila približno 4-6 mesecev (odvisno od trenutne obremenjenosti in obsega zahtevanih del). Individualne konfiguracije strojev so možne glede na želje strank, saj so stroji razstavljeni do nosilne konstrukcije in po zamenjavi vseh obrabnih delov znova sestavljeni.

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, IMA AC60 A – stroj za ovijanje Popolnoma avtomatski stroj za ovijanje izdelkov. Zahvaljujoč zasnovi, ki omogoča enostaven dostop, so vse komponente popolnoma dostopne. Idealno za farmacevtske izdelke. Proizveden leta 2012. LASTNOSTI Hfedpfxjz E Icfj Ab Eon - enostavno čiščenje in vzdrževanje - opremljen z enoto za hitro zlaganje - transport folije s prijemalkami - škarjasta rezila - prečno varjenje robov - pogonjeno gibanje spodnjih in stranskih zložnih delov folije PROIZVODNJA - Največja hitrost/zmogljivost: 60/80 izdelkov na minuto - Zmogljivost enote za zlaganje: do 225 plasti/min - Dimenzije škatel: 50 x 23 x 60 – 220/280 x 100 x 220 mm - Dolžina folije: 100 – 450 mm - Materiali za ovojno folijo: celofan, PE, PP, PVC, KRAFT - Poraba električne energije: 208 V / 3 faze

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 521.111, premer žaginega lista: 360 mm, vrsta vhodnega toka: trifazni, največja širina rezanja: 3.300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 51 A, Oprema: zaščitni pokrov žaginega lista, Prodajam profesionalno in učinkovito ploščno žago IMA Schelling, model FH 4 330. Stroj se uporablja v podjetju, ki se ukvarja s proizvodnjo pohištva po meri. Redno vzdrževan, takoj pripravljen za nadaljnjo uporabo. Uporablja se za rezanje ivernih plošč, plošč MDF in kuhinjskih pultov. Hjdpfxezvygge Ab Eofn Ključne informacije in tehnično stanje: Leto proizvodnje: 2017 Moč: 18 kW Napetost: 400 V (3 faze) 50 Hz Stanje: dobro, v stalni uporabi Zgodovina uporabe: žaga je bila uporabljena v enosmenskem režimu, 8 ur na dan.

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Hfsdpfx Abjidqphe Esn Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW Hfodpfx Abotixpuo Esn WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 Hfjdpfx Aefi Tkvsb Ejn No transmission bar (Master & Slave systems) Safety and noise protection enclosure Retractable alignment stops, distance (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. adhesive + premelter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End-trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius milling and profile trimming) MFA 08.342 (0.66 kW x 2), max 25 m/min Profile trimming unit (copying) 08.465 (0.18 kW x 4), max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free bay

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Hfjdpfxsd Scyds Ab Een Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC