Hamos Eks 1031 nakup rabljenega (1.156)

Stanje: rabljeno, prevoženi kilometri: 83.050 km, moč: 130 kW (176,75 KM), prva registracija: 08/2020, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 5.986 mm, skupna širina: 2.040 mm, skupna višina: 2.355 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Internal vehicle no.: 6067X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany, always over 400 vehicles immediately available. Largest selection - best price. More than 1,000 satisfied customers per year - top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### Pgedpfx Aoynqk Uondsn ----Well-maintained condition 1 previous owner, German vehicle, non-smoker Full service history exclusively from Volkswagen New brakes front and rear Equipped with 8 tires Summer tires on steel rims Winter tires on steel rims Automatic transmission “Bott” workshop interior with vice and shelving system LED headlights LED cargo area lighting Reversing camera Front and rear parking assist Audio navigation system Discover Media (touchscreen color display) Cruise control system Climatic air conditioning 230V socket Anti-theft alarm system + interior monitoring / anti-tow protection + backup horn Lashing eyes in the cargo area incl. load bar Upon request, we can offer you a retrofit towbar for only €599; if possible, also a towing capacity increase up to 3.5t ---- Special equipment: * Storage Package 2 * Compartments: 2 DIN slot front under roof liner * Cabin lighting: Reading light front * Audio navigation system Discover Media (touchscreen color display) * Voice control system * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Lockable glove compartment * LED headlights * LED daytime running lights * 2nd battery with battery monitor * Driver/passenger airbags, front passenger airbag deactivatable * Exterior mirrors electrically adjustable and heated * On-board tools and car jack * Anti-theft alarm system + interior monitoring / anti-tow protection + backup horn * Driver assistance system: front and rear parking assist * Suspension: reinforced shock absorbers and stabilizers, front and rear * Vehicle without type designation * Cruise control incl. speed limiter * Climatic air conditioning (cab) * Multifunction steering wheel * Side marking lights * Reversing camera * Hinges for rear doors with increased opening angle * Driver’s cab seats: double passenger seat with storage compartment and backrest foldable to form a table * Driver’s cab seats: comfort driver’s seat * 230V socket in cab * Rear step integrated in bumper * Auxiliary heater (hot water) with parking heater function and remote control Standard equipment: Anti-lock braking system (ABS), Drive type: front-wheel drive, convex exterior mirror left, convex exterior mirror right, LED indicator lights integrated in exterior mirrors, cab floor: rubber, underbody drag coefficient cover, entry handle on rear left C-pillar, entry handle on rear right C-pillar, Electronic Stability Program (ESP), Driver assistance system: hill start assist, Driver assistance system: brake assist (HBA), Driver assistance system: crosswind assist, Electric front windows, Laminated glass windscreen, 2 folding remote keys, Automatic transmission (8-speed), Grab handles on A-pillars, rear wing doors without glazing, Cab lighting: LED, Load/cargo area lighting: LED, Body/build: standard panel van, Body variant: standard roof, Fuel tank: 75 L, Radiator grille with upper chrome strip, High partition wall in cargo area without ...

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For ergonomic solutions in manual installations, we recommend suspended cross conveyors (cross transport). - In automated systems, chain conveyors are most commonly used. These run continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies producing various products simultaneously—for example, with multiple spray booths in different colors—flexible solutions with non-powered conveyors are used. This is the most expensive solution. All installations are custom-made to meet individual customer specifications. Continuous transport systems for overhead chain conveyors are designed and manufactured based on individual customer orders. In this system, floor conveyors can also be produced to carry items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross transporters) are specifically designed and manufactured to suit the requirements of individual installations. Psdpfofz Dubsx Andjgn Use of a photoelectric sensor The use of a photoelectric sensor in the detail area enables length measurement and, consequently, allows gun activation when the part enters its range, and immediate deactivation after painting. The photoelectric sensor is standard equipment. Identification of details by means of special markings. Above the hanger, plates with identification holes are present. Based on this, the PLC controller, in conjunction with the photoelectric sensor, identifies the painted part and activates or deactivates the guns at the precise moment—thereby saving energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of a part. The PLC controller measures the time a part is expected to be inside the gun zone, allowing the guns to be turned on or off selectively. With light barriers equipped with multiple sensors horizontally and vertically. This solution enables precise measurement of workpiece dimensions and thus also allows control of manipulators.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can either be operated on the floor or suspended from rails. - For convenient solutions in manual systems, we recommend overhead cross-transfer systems (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These operate continuously and present an excellent solution for companies focused on process quality and repeatability. - For companies producing various items simultaneously or operating multiple booths with different colours, flexible solutions utilising non-powered conveyors are employed. This is the most expensive solution. All systems are custom-built according to customer specifications. Continuous hanging chain conveyor systems are designed and manufactured to individual client orders. In this system, it is also possible to implement floor conveyor systems to transport items such as flowerpots or wheels (see photo). ROMER also manufactures suspended transport systems. Cross-traverses (cross transporters) are specifically designed and manufactured for unique installation requirements. Use of a photocell Integrating a photocell in the detail area allows for length measurement and permits the guns to be activated as the part enters their range, and switched off immediately after coating to save energy and powder. The photocell is included as standard. Details can be identified using special markers. Pjdjfz Dt Nspfx Andegn Above the hanger, plates with identification holes are installed. Based on this, the PLC controller, together with the photocell, recognises the coated part and switches the guns on and off at precisely the right time—saving energy and powder. Vertical shape detection. By using light barriers with horizontal detectors, the PLC can analyse the vertical profile of a part. The PLC also controls the dwell time of the part in the gun chamber, allowing for selective activation and deactivation of the guns. Light barriers with multiple sensors, both horizontally and vertically, are also available. This facilitates precise measurement of workpiece dimensions, enabling manipulator operation as well.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Use of a Photoelectric Sensor The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. Psdpfsfz I Edjx Andegn This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved along the floor or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an outstanding solution for companies focused on process quality and repeatability. - For businesses that manufacture different items simultaneously—such as operating multiple booths with different colors—flexible solutions using non-powered conveyors are employed. This is the most costly option. All installations are custom-built to suit customer requirements. Continuous transport systems for overhead chains are designed and manufactured according to individual client specifications. In this system, it is also possible to manufacture floor conveyor systems that carry items such as flower pots or rims (see photo). ROMER also produces overhead transport systems. Crossbeams (cross conveyors) are designed and manufactured to meet the requirements of specific installations. Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece zone allows for length measurement and enables automatic switching of spray guns when the item enters their range, turning them off immediately after coating the item. The photoelectric sensor is included as standard equipment. Item identification is possible via special markings. Over the sling, there are plates with identification holes. Based on these, the PLC controller, in conjunction with the photoelectric sensor, detects the painted item and switches the spray guns on and off at the correct time, thus saving both energy and powder paint. Vertical workpiece shape detection. Pjdpfxefz Nb Ts Andogn By using light barriers with horizontal detectors, the PLC control system can analyze the vertical shape of a workpiece. The PLC calculates the time when the item is expected to appear in the spray booth, enabling selective activation or deactivation of the guns. With multi-sensor light barriers both horizontally and vertically arranged. This solution allows for precise measurement of workpiece dimensions, which also enables the control of manipulators.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. Pgedpfjfz U S Ejx Andon This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: dober (rabljeno), Leto izdelave: 2001, Sheet width: 3050 mm Sheet thickness: 10.0 mm Sheet thickness for stainless steel: 6.0 - 8.0 mm Hold-down devices: 13 units Frame clearance: 3070 mm Shearing angle: 1.0 - 4.0° Strokes: approx. 22 strokes/min Control system: ELGO P8511 Oil capacity: 240 l Voltage: 400 V Total power requirement: 15.0 kW Weight: 8000 kg Dimensions (LxWxH): 3550 x 2350 x 1900 mm In good condition (!!) From a maintenance workshop Pgjdpfoy Ig R Ejx Anden Features: - NC electro-hydraulic guillotine shear "WITH GUIDED SLIDEWAYS" - Heavy-duty/stable welded steel construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized back gauge with ball screws - Electro-hydraulic cutting angle adjustment * Front analog angle indicator - 1x sturdy side fence with T-slot and mm scale - 3x sturdy support arms with T-slot and mm scale - Ball transfers integrated into the worktable, incl. hand recesses - Front finger guard—foldable upwards at the front - 1x freely movable foot switch - 2x emergency stop buttons at the front - Rear safety guard (protection grid) - Original operating manual

Stanje: skoraj kot novo (rabljeno), Number: 30206550 Operating hours: 4,686 h Power: Podpfsi Ra Tgox Andjgn Internal dimensions: Dimensions: 1,300 x 900 x 1,450 mm Height with frame: 2,100 mm Weight:

Leto izdelave: 2001, stanje: dober (rabljeno), IMA gluing unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round bonding on butt joints with: - Main pressure roller, diameter 100 mm, and pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for coating the edge material, with temperature and level control - Servo drive for edge feed with automatic adjustment to feed speed - Hot air post-activation unit 7.5 kW, on the glue side - IR emitter 600 watt on the decorative side for preventing material deformation on small radii - Pneumatically driven cross-cut saw - Butt joint detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm - Separate NC axis in Y (in portal applications X) operating independently from the main axis Pgjdpjbxx Ikefx Anden Part year: 2001, taken from IMA 680 V No. 2216 Scope of delivery as shown Please check if this part can be installed in your machine. No returns possible. The unit was in production use for approx. 2 years and is in good condition. Technical data subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, AMADA MODEL HFT 103, hidravlična upogibna stiskalnica z zmogljivostjo 100 ton in dolžino upogibanja 3000 mm, opremljena s CNC krmiljem CD 2000 z grafičnim zaslonom v barvah in 4 osmi. Stroj ima integrirane elektronske laserske varnostne zaščite FEISSLER, ter bočno in zadnjo varnostno ograjo z medsebojnim zaklepanjem. Model: Amada HFT 100/3 hidravlična CNC upogibna stiskalnica (downstroke) Leto: 2007 Tonska moč: 100 kN Tip krmilja: CD 2000 CNC Krmiljene osi: Y1, Y2, X, R Največja dolžina upogiba: 3000 mm Odprtina (višina): 470 mm Dolžina hoda: 350 mm Hitrost približevanja: 100 mm/s Hitrost upogibanja: 1 - 10 mm/s Povratna hitrost: 1 - 100 mm/s Podpfx Ajzbql Sjndogn Moč motorja: 7,5 kW Teža: 7300 kg Dolžina mize: 3000 mm Širina mize: 180 mm Globina grla: 420 mm CNC upravljanje. Delovnih ur: 12.000. BROŠURA IN DODATNE INFORMACIJE NA ZAHTEVO.

Stanje: novo, Leto izdelave: 2025, vrsta goriva: dizel, proizvajalec motorjev: NEF67TM3A, Namen uporabe: gradbeništvo Lastna teža: 3.400 kg Moč generatorja: 187 kVA Dimenzije tovornega prostora: 350 x 175 x 220 cm Prostornina rezervoarja za vodo: 500 l Za več informacij se obrnite na ekipo DPX. Pgsdet Hc Ibjpfx Andjn = Dodatne opcije in dodatki = - Baterija - Nadzorna plošča - Jeklena streha - Cisternsko vozilo

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: FGWPEP40PJSD06581, vrsta goriva: dizel, moč: 88 kW (119,65 KM), proizvajalec motorjev: Perkins 1104C-44TAG2, Namen uporabe: Gradbeništvo Lastna teža: 1.295 kg Moč generatorja: 110 kVA Pgedov T H Euspfx Andon Dimenzije tovornega prostora: 277 x 113 x 153 cm CE certifikat: da Prostornina rezervoarja za vodo: 218 l Država proizvajalca: CN Za dodatne informacije kontaktirajte ekipo DPX. = Dodatne možnosti in oprema = - Baterija - Nadzorna plošča - Jeklena streha - Rezervoar

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: FGWPEP40EJSD07533, vrsta goriva: dizel, proizvajalec motorjev: Perkins 1104C-44TAG2, Namen uporabe: gradbeništvo Lastna teža: 1.254 kg Moč generatorja: 110 kVA Dimenzije tovornega prostora: 209 x 112 x 153 cm CE oznaka: da Prostornina rezervoarja za vodo: 218 l Pgodpfx Aey Nhu Iondsn Država proizvodnje: CN Za več informacij se obrnite na ekipo DPX. = Druge možnosti in dodatki = - Baterija - Kontrolna plošča - Cisterna

Stanje: dober (rabljeno), Presskracht 110 ton Podpfew Hx Rzox Andogn Buiglengte 3100 mm Bouwjaar 1990 + retrofit Staanderbreedte 2600 mm Gesteunde assen Y1, Y2, X-as Besturing: ESA S630 besturing Inclusief Wila klembare bovenstempel

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 20 h, The EVO represents the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while maintaining the lowest total operating costs. Key highlights include the premium components used in this machine, as well as the latest version of the BENDtronic® control system, which comes as standard on all EVO machines. Available from stock: HAEUSLER EVO 31031 4-Roll Plate Bending Machine / Plate Roller Manufacturer: Haeusler Model: EVO 31031 4-Roll Plate Bending Machine / Plate Roller Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, demonstration machine Availability: Immediate Specifications: Working width: 3100 mm Plate rolling capacity: 14 mm Pre-bending capacity: 12 mm Looking for a different machine? As an authorized Haeusler dealer, we can configure and offer the machine of your choice to meet your specific requirements. Do not hesitate to contact us. Pgedpfxoxwmb Hs Andjn

Stanje: rabljeno, Atlas Copco Compressor Package – from the smallest to the largest units! Podoq Dlk Ajpfx Andogn We offer a range of Atlas Copco screw compressors in various power and performance configurations – from compact models to large industrial units. The ideal solution for companies seeking reliable compressors at competitive prices. - Wide selection of models - Attractive pricing - Fast and efficient order processing Contact us to find the right compressors for your needs!

Stanje: rabljeno, prevoženi kilometri: 524.282 km, moč: 265 kW (360,30 KM), prva registracija: 11/2008, vrsta goriva: dizel, velikost pnevmatike: 315/80 R 22.5, konfiguracija osi: 4x2, medosna razdalja: 4.200 mm, gorivo: dizel, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, skupna dolžina: 8.000 mm, skupna širina: 2.520 mm, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, Leto izdelave: 2008, Oprema: ABS, AdBlue, EBS (Elektronski zavorni sistem), airbag, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, računalnik na krovu, servovolan, spojka prikolice, zapora diferenciala, = Dodatne možnosti in oprema = - Zunanji termometer - Ogrevana ogledala - Sedež sopotnika - Listnato vzmetenje - Strešno okno - Digitalni tahograf - Hladilnik - Zračno vzmetenje Pgjdew Enp Rjpfx Andsn - Sedeži z zračnim vzmetenjem - PTO (odvzem moči) - Radio/CD predvajalnik - Kamera za vzvratno vožnjo - Spalna kabina - Stranska vrata - Senčnik - Sistem za stabilnost vozila - Vlečna kljuka = Dodatne informacije = Dimenzija pnevmatik: 315/80 R 22.5 Zavore: Kolutne zavore Prednja os: Največja dovoljena obremenitev osi: 9000 kg; Krmiljena; Profil pnevmatike levo: 30%; Profil pnevmatike desno: 30%; Vzmetenje: listnato vzmetenje Zadnja os: Dvojna montaža; Diferencialna zapora; Največja dovoljena obremenitev osi: 11500 kg; Profil pnevmatike levo znotraj: 70%; Profil pnevmatike levo zunaj: 50%; Profil pnevmatike desno znotraj: 90%; Profil pnevmatike desno zunaj: 40%; Redukcija: enostopenjsko reducirano; Vzmetenje: zračno vzmetenje Število cilindrov: 6 Prostornina motorja: 12.902 ccm Lastna masa: 15.420 kg Nosilnost: 5.080 kg Največja dovoljena masa (zGG): 20.500 kg

Stanje: dober (rabljeno), Used stainless steel tank / transport container / IBC Previous application: Chemicals Article number: 10315 Tank cleaned! Pgodped I S Ulsfx Andjn Volume: 500 liters Type: Vertical, in galvanized stacking frame Material (product contact): 1.4301 / AISI 304 Design: Single-walled Bottom: Dished Top: Dished Operating pressure (as per nameplate): +0.2 bar Tank dimensions: Overall width: 1200 mm Overall length: 1000 mm Overall height: 1000 mm Materials: Internal: 1.4301 / AISI 304 External components: Galvanized steel Features: Nameplate: Yes Outlet diameter: 50 mm Outlet type: DN50 Outlet valve: Yes

Stanje: rabljeno, Leto izdelave: 1991, Maks. dolžina reza: 3100 mm Maks. debelina reza: 10 mm jeklo Motoriziran zadnji prislon do 1000 mm z digitalnim prikazom Stranski prislon in podaljški mize Omejitev dolžine reza Pgsdpshlnv Usfx Andon Osvetlitev rezalne linije Teža: pribl. 10.000 kg Pozor: Zadnji prislon deluje nekoliko nenatančno (+/- 1 mm)

Stanje: zelo dobro (rabljeno), Lokični mikrometer Mitutoyo (28662) 103-155 OM-475, merilno območje 450 - 475 mm Pjdpsw Suwgsfx Andsgn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 17.446 h, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, kapaciteta rezervoarja za olje: 130 l, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 2.440 mm, skupna masa: 8.900 kg, proizvajalec krmilnikov: DELEM, model krmilnika: DA65, delovna širina: 3.100 mm, upogibna sila (maks.): 110 t, vrsta upravljanja: CNC krmiljenje, število osi: 8, vrsta aktuacije: hidravlični, Oprema: CE označba, dokumentacija / priročnik, evropski sistem vpenjanja orodij, nožno daljinsko upravljanje, nujno zaustavitev, spodnje orodje, varnostna svetlobna zapora, zgornje orodje, Prodajam rabljeno upogibno stiskalnico DARLEY EHP-L 110 31/25, letnik 2000. Pgedpfex N Ibhsx Andsn Stroj je v odličnem tehničnem stanju, brezhibno delujoč. Zelo natančen in ponovljiv. Decembra 2023 so bili zamenjani vsi tesnilni elementi cilindrov ter olje s filtri. Februarja 2024 je bil opravljen servis zgornjega nosilca orodij WILA. Stroj ima nizko število obratovalnih ur. Hidravlika: Hoerbiger Serijska številka: 122067 Tip stroja: EHP-L 110 31/25 Leto izdelave: 2000 Največja stiskalna sila: 1100 kN Delovna dolžina: 3100 mm Moč: 11 kW Napetost: 400 V Prostornina hidravličnega rezervoarja: 130 l Tlak hidravličnega sistema: 28 MPa Teža: 8900 kg Tip orodij: hidravlični Wila / Trumpf Krmiljenje: DELEM DA65 Število osi: Y1, Y2, X1, X2, R1, R2, Z1, Z2, + kompenzacija upogibne puščice Za morebitna vprašanja ali dodatne informacije nas kontaktirajte po e-pošti ali telefonu.

Stanje: rabljeno, Circuit breaker, motor protection switch, star-delta switch, reversing switch -Siemens: Sirius type 3RV1031-4DB10 -Current rating: 18 - 25 A -Dimensions: 150/60/H160 mm -Weight: 1.1 kg Pgedpfx Aefifk Nondsn

Stanje: rabljeno, Hydraulic pump, hydraulic power unit, hydraulic reservoir, hydraulic tank Pgodpfx Aorgtd Ujnden - Manufacturer: Safan, hydraulic reservoir from press brake Type UC 110-3100 - Level indicator: sight glass - Overall dimensions: 1950/540/H485 mm - Weight: 69 kg

Stanje: rabljeno, Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder Pgsdsi Huvwspfx Anden -Endress+Hauser: Color Hybrid Recorder Alpha-Log with accessories -Recorder: Type RSA10-31B1T -Isolating Power Supply: RN 221 -Modbus: RS 485 -Thermometer: TST 10 -Pressure Transmitter: PMC 133 -Individual components: see photos -Price/Transfer: complete -Transport dimensions: 500/500/H200 mm -Weight: 11 kg

Stanje: dober (rabljeno), Transformer, Trafo, Converter, Three-Phase Autotransformer, Three-Phase Transformer, Three-Phase Transformer, Single-Phase Transformer, Control Transformer, Safety Transformer Podpfxorgtfgo Andegn -Manufacturer: Schuster, transformers from Safan press brake model UC 110-3100 -Type: GLD11-3870 1 mH 100 A -Type: TEK-4191 500 VA -Type: TUK-4450 2 kVA -Type: DK-3449 750 VA -Technical data: see nameplate photos -Delivery/Price: complete -Overall dimensions: 405/290/H255 mm -Weight: 51 kg