Hidravlične giljotinske škarje

EHT ECOCUT I / 10-31

Leto izdelave: 2024, stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Cgodpfx Aeftdh Iohxet Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Cgsdpfx Asd Ixadehxot The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Leto izdelave: 2008, Bombiranje CNC krmiljeno Dolžina upogibanja 4250 mm 6-osni zadnji prislon Cgedpsyvr Apsfx Ahxot Osvetlitev delovnega prostora Parkirni položaj 900 mm Hidravlično vpenjanje spodnjega orodja Hidravlično vpenjanje zgornjega orodja Premik spodnjega orodja CNC Vgradna višina 615 Priprava za ACB

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. Csdpjuxfupjfx Ahxegt - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Used swing beam guillotine shear RAS 86.33 with newly ground upper and lower blades, regularly serviced and barely used. Technical Data: Year of manufacture: 2008 Weight: 6,800 kg Cgodpfx Ahsv Tk Exjxet Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5-1000 mm Working height: 800 mm Strokes per minute: 30-64 spm Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle gauge: 2,195 mm Machine depth with angle gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat: 100 mm Tank capacity: 150 l

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 48.412 h, TRUMPF TruLaser 7040 Twin-head machine Year of manufacture: 2012 Laser power: 2 x 3200W Operating hours: 48,412 h Machine weight: 16,000 kg Available from Q2 2025! Cjdpfxjvnra Hj Ahxegt Further information available upon request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding Cjdpfx Ajtqf Rzohxogt 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: dober (rabljeno), Manufacturer: Ursviken Type: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for the production of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table & ram in X direction Extensive die set package with radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine embedded 2,350 mm below ground level Specifications: Cjdpfxskvmi So Ahxjgt Metric | US Standard Capacity: 1,000 t Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (approx.): Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations shall be assumed. We recommend verifying all critical details.

Leto izdelave: 2007, stanje: dober (rabljeno),

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, YEAR: 2008 MAXIMUM RAM PRESSURE: 2,000 Ton RAM STROKE: 1,500 mm TABLE SIZE: 5,000 x 2,380 mm UPPER BLANKHOLDER PRESSURE: 300 Ton BLANKHOLDER STROKE (ram side): 200 mm FAST APPROACH SPEED: 220 mm/sec BLANKHOLDER CAPACITY: 600 Ton CUSHION STROKE (ram side): 400 mm OVERALL HEIGHT FROM FLOOR: 9,145 mm Cgjdpfjvm Eixex Ahxst FRONT OPENING (distance between uprights): 5,000 mm TOTAL WEIGHT: n.a.