Goti S.a. Ce 200 Tn nakup rabljenega (29.295)

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Prodpfei Dfidex Amfoa Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, FLEISCH PRESS MACHINE SM200 Suitable for pressing all types of meat (beef, turkey, poultry, pork, etc.) Operating speed: up to 15 pieces per minute Adjustable thickness: 3–20 mm Easy to use Easy to clean and maintain Safety switch Made of stainless steel AISI 304 Hydraulic system: 150 bar Pjdpfx Amoqv Ea Dsfora 400 V, 50 Hz, piston diameter: 300 mm

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Predpowc Rcnjfx Amfsa Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)

Stanje: zelo dobro (rabljeno), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into enclosures. When used with a timer, the test cycle can be automated with adjustable test durations from 3 seconds to 30 hours. Compliant with DIN VDE 0470 Part 1 and EN 60529 for IPX3 and IPX4 protection class testing. The integrated recirculation system minimizes water consumption. Features Prsdjzil T Eopfx Amfea - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical load data - Max. test load (distributed evenly): - Permissible test specimen weight (total for test tray): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operational data - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have any further questions, we would be happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 550 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 041, Mostna rezkalna žaga za marmor in granit, z vrtljivo in nagibno mizo, nova jeklena temelja za most in mizo na voljo. Mere: 560 cm dolžina, 460 cm širina, 300 cm višina. Teža cca 6160 kg. Inverter motorja rezalne plošče. Pjdpjzim Dlofx Amfera Delovna miza z motornim pogonom in nastavitvijo nagiba. Linearen sistem oblikovanja. Nagib plošče za poševne reze.

Stanje: zelo dobro (rabljeno), LDS Dactron COMET USB Shaker Control System Type: COM 200 Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System, type COM 200, for controlling electrodynamic vibration test systems. The system is suitable for random, sine, and shock testing in laboratories, industry, automotive, as well as research and development. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial number: 11303191 Made in U.S.A. Technical data 2-channel shaker control system USB interface Supply voltage: 100 – 240 V Frequency: 47 – 63 Hz Current consumption: 0.5 A Suitable for: Random tests Swept sine tests Shock tests Electrodynamic vibration test systems Software / Features Installed software as per system display: Shaker Control Version 8.1001 Pjdsy Ugrpopfx Amfera Library Version 6.3120 Unlocked module: Value Swept Sine Activated option: Real Time Data Exchange Connections USB port BNC connectors Mains connection Further connections, see pictures Calibration Calibration data according to sticker: Calibration date: 2010-09-21 Due date: 2011-09-21 The calibration has expired. A recalibration can be carried out by the buyer if required. Condition Used device from industrial operation. Visual condition as shown in the pictures. Normal signs of use and storage present. The device has been powered on. Indicator light and software display are active. No further functional or calibration testing has been performed. Scope of delivery LDS Dactron COMET USB COM 200 controller Power cable / connection cable as shown in pictures Accessories as shown in pictures Scope of delivery only as depicted. Notes Viewing by appointment possible. Loading and shipping by arrangement. Commercial sale without warranty. Subject to change, error, and prior sale.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 250 kg, Leto izdelave: 1995, Kinshofer Greiftechnik 605-200/nakladalni žerjav • Proizvajalec: Kinshofer Greiftechnik GmbH • Tip: 605-200 večnamenski ali školjkast prijemalec • Leto izdelave: 1995 • Hidravlični prijemalec za nakladalni žerjav • Uporablja se za prijemanje in premikanje materialov • Področja uporabe: odpadna kovina; hlodi; kamenje; rušilni material; reciklirni material • Nosilnost: 3000 kg • Teža: 250 kg Prodpfey Taqijx Amfsa • Nemški stroj • Takoj pripravljen za uporabo • Ta ponudba ni zavezujoča in je predmet sprememb. - Pridržano predhodno prodajo, - Ne izključujemo napak ali tiskarskih napak. - Prodaja po naših splošnih pogojih.

Stanje: rabljeno, potovalna razdalja osi X: 12.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 2.000 mm, položaj glave za glodanje: AUTOMATICA, največja hitrost vretena: 2.000 obr/min, moč vretenovega motorja: 29 W, MECOF M 200 mobilna rezkalna glava Predpezhnx Iefx Amfsa

Stanje: potreben popravila (rabljeno), Leto izdelave: 2005, obratovalne ure: 20.000 h, Funkcionalnost: nefunkcionalno, Vrsta stroja: CNC stružno-rezkalni center Proizvajalec: GILDEMEISTER Tip: GMX 200 linear Leto izdelave: 2005 Krmiljenje: Siemens 840 D powerline Lokacija skladišča: Ober Ramstadt Tehnične podrobnosti Premer struženja: maks. 560 mm Dolžina struženja: 1.070 mm Krmiljenje: Siemens 840 D powerline Razdalja med vreteni: 1.000 mm Glavno vreteno: Maks. hitrost vrtenja: 5.000 min⁻¹ Pogonska moč glavnega vretena: 25 / 37 kW Maks. navor: 390 Nm Premer vretena v sprednjem ležaju: 120 mm Prehod vretena: 79 mm Maks. premer palice: 68 mm C-os: 0,001 ° Premer vpenjalne glave: 200 - 315 mm Rezkalno vreteno: Hitrost vrtenja: maks. 12.000 min⁻¹ Pogonska moč rezkalnega vretena: 13,2 / 22 kW Maks. navor: 100 Nm Vpenjalo orodja: Capto Zadrževalni moment: - Y-os: +/- 80 mm B-os: +/- 120 ° C-os: 1 ° X-hod: 485 mm Premer ležaja: 80 / 55 mm Proti-vreteno: Maks. hitrost vrtenja: 5.000 min⁻¹ Pogonska moč proti-vretena: 25 / 37 kW Maks. navor: 320 Nm Premer vretena v sprednjem ležaju: 120 mm Prehod vretena: 79 mm Maks. premer palice: 68 mm C-os: 0,001 ° Maks. premer vpenjalne glave: 315 mm Orodjarnik: Število orodnih mest: 46 poz. HSK 63 A Vpenjalo orodja: - Maks. premer orodja: 80 mm Maks. premer orodja pri prosti sosednji poziciji: 150 mm Podpfx Amszd Dw Esfjra Maks. dolžina orodja: 300 mm Skupna potrebna moč: 75 kVA Približna teža stroja: 14,0 t Približne dimenzije (DxŠxV): 8,0 x 4,5 x 3,1 m Dodatna oprema Dokumentacija Transportni trak za odrezke Hladilna naprava: 8 / 20 bar C-os B-os Y-os Orodjarnik Proti-vreteno Rezkalno vreteno

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 27.000 h, stružna dolžina: 1.070 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 485 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.070 mm, teža obdelovanca (maks.): 150 kg, skupna višina: 2.800 mm, skupna dolžina: 9.000 mm, skupna širina: 5.000 mm, Forkardt vpenjalna glava, glavni vretenec, 250 mm Forkardt vpenjalna glava, pomožni vretenec, 250 mm Transportni sistem za odrezke Filtracija z IKZ in papirnato filtracijo Novo glavno ležišče vretenca, zamenjano leta 2022, življenjska doba 12.000 ur Odlično vzdrževan stroj, v delovnem stanju Prjdszl Agzspfx Amfja Celoten nabor navodil in priročnikov Maks. premer obdelovanca: 560 mm Os X: 485 mm Os Y: 160 mm Os Z: 1070 mm Os B: 240° Premer vretenca: 65 mm Število vrtljajev: 5000 vrt/min Moč vretenca: 37 kW Število vrtljajev pomožnega vretenca: 5000 vrt/min Premer pomožnega vretenca: 65 mm Moč pomožnega vretenca: 37 kW Menjalnik orodij: 80 Število vrtljajev vretena za pogon orodij: 12000 vrt/min Priključni standard za os B: HSK63 Število vrtljajev vretenca na osi B: 12000 vrt/min Moč osi B: 22 kW Transportni sistem za odrezke: Da Sistem za nadzor orodja (Tool Eye): Da Delovne ure: 27.000 ur Teža obdelovanca: 150 Dolžina: 9000 mm Širina: 5000 mm Višina: 2800 mm Teža: 14.500 kg

Stanje: novo, Universally applicable double grinding machine for professional users. The induction motor operates quietly and maintenance-free thanks to high-quality ball bearings. The premium grinding wheels ensure optimal results when sharpening and deburring tools. Technical Data: Grinding wheel bore: 32 mm Grinding wheel grit: K 36 / K 80 Speed: 2,850 rpm Motor output S1 100%: 0.90 kW Motor input S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON/OFF switch (IP54) with undervoltage release - Expanded application range with optional grinding attachment available - Versatile usage for various materials (metal, plastic, wood, ...) - Smooth operation thanks to balanced rotor with quality ball bearings - Large protective glass shields for optimal spark protection - Stable and adjustable cast workpiece support - Robust performance owing to powerful drive motor Psdpfx Asvnrm Hsmfera Included in delivery: - Rough grinding wheel K 36 - Fine grinding wheel K 80 - Spark protection on both sides - Workpiece support Note: Images may show optional extras and application examples, which are not included in the scope of delivery. (Belt grinding attachment and base frames available at additional cost)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Robot ABB Robotics IRB6650 Foundry 200/2.75 S4C+ M2000, Profibus Krmilnik: S4C+ M2000 Število osi: 6 Maksimalna nosilnost: 200 kg Maksimalni delovni obseg: 2750 mm Letnik izdelave: 2003 Obseg dobave: Robot, krmilnik, kabli, učni panel, električna shema, disketna enota za varnostno kopiranje podatkov. Podpfxezly I Aj Amfsra Rabljen izdelek – prisotne so normalne sledi uporabe. Dodatne podrobnosti, številke artiklov in slike so na voljo na zahtevo. Dve tedna garancije za obdobje uvajanja v uporabo. Drugačna garancija ni podana. Poleg tega so nadomestni deli nenehno na voljo na zalogi. Robot je popolnoma funkcionalen in ga lahko po želji pregledate. Brezplačno nakladanje / tovarna. Navedena cena je neto cena. Zakonodajno predpisani davek na dodano vrednost (DDV) 19 % bo dodan ob zaključku nakupa. Dobili boste ustrezni račun z navedenim DDV. Prevzem na lokaciji v 74722 Buchen/Hainstadt. Stroški pošiljanja ali špedicije se razlikujejo glede na količino, težo in želene pogoje dostave. Stroški pošiljanja v tujino so na voljo na zahtevo – prosimo, navedite državo, kraj in poštno številko. Stroški špedicije so na voljo na zahtevo – prosimo, navedite naslov za dostavo.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Univerzalni rezkalni stroj Deckel FP1 z digitalnim prikazovalnikom za 3 osi K&C, brezstopenjska podaja, svetlo siva barva, v skladu s standardi CE, odlično stanje. Tehnični podatki: >> Letnik proizvodnje 1980, št. stroja 2101-1423 >> Trdna nagibna miza >> Število vrtljajev: 40 - 2000 vrt/min >> Brezstopenjska podaja po dveh osi >> Moč pogona: 1,5 / 1,9 kW >> Zavora vretena >> Hitri hod >> Hodi po osi X/Y/Z: 300/160/340 mm >> Navpična rezkalna glava, pomična po nosilcu vretena (100 mm) >> Navpični in vodoravni vpenjalni stožci - SK40 >> Sistem vpenjanja M16 >> Teža približno 700 kg Dodatna oprema in izvedba: >> Digitalni prikazovalnik za 3 osi K&C, novo nameščen z garancijo proizvajalca in navodilom za uporabo. Prikazovalnik: nastavljanje referenčnih in nulnih točk, vnašanje koordinat, preklapljanje med mm in palci, absolutne ali inkrementalne koordinate, funkcijo kroga, vrstice lukenj, funkcije rezkanja po krogu itd. >> Sistem za hlajenje >> Luč za stroj >> Navodila za uporabo, seznam rezervnih delov >> Vpenjalne priprave, primež, proti-primež Podpfx Amozl Uz Djfora O stroju: Ponujamo univerzalen rezkalni stroj Deckel FP1, v skladu s standardi CE, v zelo dobrem stanju. Stroj ima zelo malo zračnosti in vsa vretena se lahko premikajo z lahkoto. Vsi zložljivi pokrovi so novi. Pri tem novejšem modelu FP1 je podaja po dveh osi brezstopenjsko nastavljiva, stroj pa ima tudi hitri hod. Izvedena je bila menjava olja. Stroj je bil mehansko in električno pregledan. Nova digitalna enota podjetja K&C olajša delo in omogoča še natančnejše rezultate. Izkoristite priložnost in stroj oglejte ter preizkusite na licu mesta.

Stanje: novo, Stanje novo Dobavni rok približno 2 - 4 tedna od naročila Država izvora Nemčija Cena 956,67 € Dimenzije brusilnega koluta 200 x 32 x 32 mm Motor 1 kW Število vrtljajev 2800 1/min Priključek za odsesavanje premer 42 mm Dolžina 250 mm Širina 470 mm Višina 230 mm Transportne dimenzije 325 x 540 x 310 mm Tih in vzdrževanja prost motor Stransko zaprti zaščitni pokrovi Stabilna, nastavljiva odlagališča za obdelovanec Visoka varnost zahvaljujoč nastavljivim zaščitnim napravama proti iskrenju Primerno za brušenje, odstranjevanje robov in ostrenje vseh vrst orodij, kovinskih profilov itd. Zaščitno stikalo motorja in izklop pri padcu napetosti Obojestranska zaščita proti iskram in zaščita za oči Pedpfx Amsy H N Azofora Priključni kabel s CEE vtikačem 16 A Vsak po ena groba in ena fina brusilna plošča 12 mesecev garancije pri enosmenskem obratovanju .: 317.762 izvedba za na mizo ALTERNATIVNE IZVEDBE: .: 317.774 z stojalom, tipko za izklop v sili in zavoro .: 317.777 z integriranim odsesavanjem MA400D, stojalom, tipko za izklop v sili in zavoro

Stanje: novo, Leto izdelave: 2024, Nova strojna oprema Letnik izdelave 2024 Tehnični podatki Velikost mize 1100 x 760 mm Višina mize 905 mm Vreteno 30 mm s hitro vpenjalno matico Višina vpenjanja 140 mm Nastavitev višine 125 mm Odvodni priključek 2 x Ø 120 mm Stopenjska regulacija vrtljajev 1500–10000 vrt/min Moč motorja 7,5 kW (10 KM) Neto teža približno 880 kg Tehnični opis 7-palčni zaslon na dotik, opcijsko za uporabo zgoraj in spodaj 7-palčni kapacitivni zaslon na dotik, uporabljiv tudi z rokavicami (npr. z modelom Maxi Flex) Izbira jezika: nemščina, angleščina, francoščina (dodatni jeziki na zahtevo) Nastavitev začetne točke rezkala v programu, 3 referenčne točke Enostavna menijska struktura zahvaljujoč inovativnemu zaslonu na dotik (maks. 2 ravni) Prikaz (delovni zaslon) za orodje in številko programa, višino, kot, vrtljaje in rezalno ograjo Števec obratovalnih ur Opozorilna sporočila pri nepravilni uporabi Oddaljeno vzdrževanje prek interneta (VPN tunel) USB vmesnik za varnostno kopiranje podatkov in nalaganje orodja, programa in uporabnika Baza podatkov orodij za 5 orodij (na orodje je možnih 20 programov) Močna miza za rezanje z dvostransko vrtljivo, fiksno vgrajenim vretenom za območje vrtljivosti +/- 45,5° Dvovijačna pozicijska krmilna enota za nastavljanje višine in kota Elektronski prikaz pozicije in vrtljajev Stopenjska regulacija vrtljajev 1500–10000 vrt/min, motor 7,5 kW s frekvenčnim pretvornikom 11 kW Gumbi s elektronskim mehkim zagonom Levi in desni tek Hitra vpenjalna naprava za rezalo Fino obdelana plošča sive litine s trdno podporo okvirja Rezalna ograja 301, celotna nastavitev se izvaja z 1 ročnim kolesom na desni strani, območje nastavitve približno 140 mm, prikaz mere, celotna ograja prek zaslona na dotik +/-0,1 mm, nastavitev delne ograje (odstranjevanje materiala) +5 mm do -25 mm se izvaja s pomočjo vijaka s štiriročno ročico na levi strani, prikaz mere s pomočjo milimetrskega nonija, pritrditev na strojno mizo ročno s pomočjo vpenjalnih vijakov, rezalna ograja iz aluminijeve tlačne litine z 2 obdelanimi litoželeznimi ploščicami ograje, dolžina 500 mm z aluminijastimi jezički za odvajanje, največji možni premer orodja je 250 mm Vtičnica za stroj Zaklepni glavni stikalo Elektronska, odporna zavorni sistem motorja Zaščita in pritrdilna naprava za rezanje GAMMA V 1629 Loka rezalna ograja 1639 Tapoa Vreteno 30 mm s hitro vpenjalno matico Skladnost s standardom CE vključno z: - Rezalna ograja tip 301 - Litoželezne plošče ograje in aluminijasti jezički - Zaščita in pritrdilna naprava za rezanje GAMMA V 1629 Prjdex N Dhdepfx Amfea Drsnik mize za ploščo mize 1100 x 760 mm Površina je obdelana, za hitro, udobno in brez orodja nastavljanje na različne premere orodij do maks. 240 mm, vključno s sprednjim vložkom mize s hitro zaporo do premera orodja 155 mm namesto standardne obrobe mize (ni v kombinaciji z vrtljivo ploščo) - Naprava za nastavitev referenčne mere Zeromaster za natančno nastavitev 0-točke višine od rezalnega orodja do plošče mize za 24 V DC - Sistem za hitro menjavo rezalnih vreten HSK-80 s blokado vretena in rezalnim vretenom 30 mm namesto vretena 30 mm (večja natančnost pri kroženju in ni možnosti, da se zatakne v vretenski nastavek, kot pri sistemu MK 5 ali stožčastem nastavku) - Konzola

Stanje: zelo dobro (rabljeno), Dolžina vilic: pribl. 115 cm, dvojni drog, maks. dvižna višina: pribl. 320 cm, maks. nosilnost: pribl. 1000 kg, teža brez akumulatorja: 955 kg, leto izdelave 2017. Visokodvižni viličar BT SPE 200 DN. Prodpfoyu Td Dsx Amfoa

Stanje: novo, Leto izdelave: 2026, Hebeanlage für Fleischwagen, 200 Liter. Geeignet zum Beladen von Vakuummischern, Füllmaschinen und weiteren Anwendungen. Komplett aus Edelstahl – Werkstoff 1.4301. Ausführung wahlweise links- oder rechtsseitig, auch als mobile Variante verfügbar. Installierte Leistung: 0,75 kW. Maximale Tragkraft: 300 kg. Prjdowqcgnepfx Amfsa Kippehöhe: 150 cm. Eigengewicht: 340 kg.

Stanje: rabljeno, prevoženi kilometri: 43.700 km, moč: 62 kW (84,30 KM), prva registracija: 03/2021, vrsta goriva: dizel, barva: oranžna, velikost pnevmatike: 225/70 R15, voznikova kabina: drugo, vrsta prenosa: drugo, emisijski razred: Euro 6, vzmetenje: drugo, Leto izdelave: 2021, število sedežev: 2, Oprema: dodatne luči, klimatska naprava, računalnik na krovu, servovolan, Miscellaneous * 2-point belt (lap belt) for passenger * 3-point safety belt for driver – mounted on cab rear wall * 3-point belt for passenger seat * 4-wheel steering (4WS) switchable * 500 h service interval (instead of standard 300 h) with special ASH Long Life oil * Automatic lubrication system * Heated exterior mirrors * Hopper rear wall rubber-coated to minimize wear * Broom bristles mixed (steel / poly-plastic) * C-shape broom arm for weed brush system * Germany version: LED flashing beacons on the sides of the hopper (left and right) – only in combination with the front and rear flashing beacons – removal of rotating beacon – not in combination with folding rotating beacon * Rotating running rollers on suction duct – instead of skids * Spare wheel complete – M+S winter tires 225/70 R15 * Noise insulation package for cab and suction fan * Coarse dirt flap rubber in suction duct made of 17 mm material instead of 10 mm * Camera for suction mouth monitoring * Comfort driver's seat type König, air-suspended with integrated 3-point belt, seat heating * Swingo 200+ compact sweeper basic – push-type 2-brush system * Headrests for passenger seat * LED work lights on cab roof (instead of standard work lights) * LED rear lights (instead of standard lighting) * M+S winter tires 225/70 R15 instead of standard tires * Mechanical suspension for front and rear axle Pedpfezcf Abjx Amfora * Engine: VM R754EU6 – Euro6c – 4-cylinder – 62 kW (84 hp) * Professional disc brush control for 2-brush system (independent control) * Radio, CD, MP3, USB port and hands-free system via Bluetooth * Rear view monitoring with monitor and camera * Standard paint RAL 2011 orange * Swingo transport speed 50 km/h * Wheel chock with bracket * Preparation for subsequent installation of hand suction hose * Weed brush system for 2-brush system (without weed brush) * Two LED flashing beacons at the rear * Two LED flashing beacons at the front Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing & typing errors. * Subject to errors, changes and prior sale. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information without guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18597 Manufacturer: ENGEL Model: insert 200 H/70 CC 200 Year of manufacture: 2007 Clamping Unit Clamping force: 70 tons Opening stroke: 305 mm Injection Unit Prsdjy Au I Uopfx Amfsa Screw diameter: 25 mm Shot volume: 69 cm³ Shot weight PS: 62 g Injection pressure: 2381 bar Dimensions and Weight Dimensions LxWxH: 4.0 x 1.8 x 2.5 m Machine weight: 5600 kg Additional information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine, specifically designed for insert moulding applications and precision technical plastic parts. This model is built on ENGEL’s compact and robust machine concept and has been reliably used for many years in the automotive industry, electronics manufacturing, cable technology and in the technical plastics sector. One of the greatest advantages of this machine is the rotary table system. This allows the operator to insert components on one side while production continues on the other. As a result, cycle times are reduced and production is made more efficient and safer. This system offers significant advantages especially in metal-plastic combinations, connectors, cable components, and precise technical parts. Compared to classic horizontal injection moulding machines, the ENGEL INSERT series offers significantly more ergonomic and controlled insert loading. The vertical clamping system keeps inserts securely positioned in the mould, enabling highly precise production. The integrated ENGEL control system is known for stable process management and reliable operation. Thanks to the user-friendly interface, the machine is easy to operate in daily production. The machine has approximately 51,944 operating hours and, according to reports, was in continuous production use until dismantling. The overall condition of the machine appears clean and well-maintained. The control cabinet is neatly arranged and the mechanical components seem to be in good condition. The ENGEL INSERT series is especially suited for: * Insert moulding applications * Metal-plastic combination parts * Manufacturing electronic components * Connector and cable technology * Technical plastic parts * Precision industrial products Thanks to its robust mechanics, compact design, and professional production characteristics, the ENGEL INSERT 200H/70 offers a reliable and long-lasting production solution for technical plastic manufacturing.

Stanje: rabljeno, številka stroja/vozila: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Prsdpfeuaq D Asx Amfsa

Leto izdelave: 2008, stanje: rabljeno, Universal machine for eroding and grinding various PCD tools up to 250 mm diameter and 200 mm length, suitable for production and service applications. Accessories: - Full enclosure - Measuring probe for complete measurement of the tools - Workpiece holder adapter for A-axis: from SK 50 to HSK 63 A - Loader for up to 6 sets of erosion wheels (tool changer) Prsdozdinkopfx Amfea - Alphanumeric keyboard - Standard programs for measuring and eroding - Cooling and cleaning system for dielectric fluid - Automatic fire extinguishing system - Extraction unit N183 - 1 change element - 1 flushing set - 1 measuring arbor - 1 mounting flange for rotary electrodes Travel paths: X-axis travel: 440 mm B-axis: +/- 15° Y-axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° Workpiece carrier base: SK 50 Max. workpiece length: 200 mm Max. workpiece diameter: 250 mm Workpiece weight: 15 kg Connected load approx.: 6.7 kW, 400V/50 Hz Weight approx.: 7,000 kg Dimensions (W x D x H): 1987 x 3141 x 2275 mm Colour: RAL 7047 Telegrey 4 / RAL 7045 Telegrey 1

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, Rabljeno prenosno silosno skladišče Prsdpfszq S Ewsx Amfoa Proizvajalec: Ulrich Skupna prostornina: 200 t - silosni transportni sistem - dvigalni vitel - električna napeljava

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Demonstration tool: SDT 200 ASD (ATEX) Ultrasonic Multi-Function Detector Set. Includes: 1 x SDT 200 (ATEX) receiver with digital (numeric) display for static peak value detection, including rechargeable battery pack Monitoring indicators for reliable diagnostics during condition monitoring: RMS, PEAK, and Crest Factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date, and time) 1 x charger 1 x Peltor headphones 130 dB 1 x carrying strap 1 x directional probe (screw tip & rubber tip) 1 x plastic case with insert 1 x operating manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (dated 02/2020) 1 x flexible Atex sensor 550 mm with interchangeable sensor head 1 x spiral cable 1 x funnel directional probe for SDT200 Prodpfx Aspyg Sasmfea 1 x leakage tags, pack of 1000 (for marking compressed air leaks) Other leakage measuring devices available on request. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, moč: 200 kW (271,92 KM), tlak (maks.): 13 letvica, Sale: Screw Compressor ALMIG VARIABLE XP 200, speed-controlled (air-cooled) Control: Aircontrol Premium Year of manufacture: 2026 Operating hours: 0 h Ready for dispatch in 4 weeks Technical Data Type: VARIABLE XP 200 Operating Overpressure: 5 to 13 bar(g) Displacement at minimum / maximum speed, measured according to ISO 1217 Annex C: at 5 bar (g): 9.63 / 43.58  m³/min at 6 bar (g): 9.80 / 38.85  m³/min Pedpfxszm Nu Us Amfsra at 7 bar (g): 9.92 / 35.00  m³/min at 8 bar (g): 9.65 / 33.00  m³/min at 9 bar (g): 9.61 / 31.25  m³/min at 10 bar (g): 9.56 / 30.20  m³/min at 11 bar (g): 9.50 / 28.75  m³/min at 12 bar (g): 9.43 / 26.26  m³/min at 13 bar (g): 9.37 / 25.01  m³/min Protection rating / insulation class drive motor: IP 55 / ISO F Rated power of drive motor: 200 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level: 78 dB(A) Dimensions: Length: 3,300 mm Width: 1,860 mm Height: 1,945 mm Weight: 4,320 kg Compressed air connection: Flange DN 100 Visit our showroom in Erlangen. We always have a wide selection of new and used compressors in stock. For new machines, we offer leasing via our house bank with a truly simple process.

Stanje: rabljeno, Leto izdelave: 2010, stružna dolžina: 1.495 mm, hitrost vretena (min.): 35 obr/min, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.545 mm, teža obdelovanca (maks.): 300 kg, skupna višina: 2.577 mm, skupna dolžina: 5.088 mm, skupna širina: 2.450 mm, nos vretena: A2-6, premer vretena: 660 mm, Oprema: dokumentacija / priročnik, Mazak Integrex 200-lV ST CNC-obravalni center za struženje in frezanja z drugo vreteno CNC-krmilnik Mazatrol Matrix Premer obdelovanca pri struženju 660 / 260 mm Dolžina obdelovanca pri struženju 1495 mm Premer luknje v vretenu 65 mm Stožec vretena A2-6 Stožec vretena pomožnega vretena A2-6 Število vrtljajev vretena 35 - 5000 vrt/min Prodpfxezqt Umo Amfea Število vrtljajev pomožnega vretena 35 - 5000 vrt/min Število vrtljajev glave za frezanje 15 - 21.500 vrt/min Gib X-osi 580 mm Gib Y-osi 160 mm Gib Z-osi 1.545 mm Gib B-osi 225 ° Indeksiranje C-osi 0,0001° (360°) Stožec orodja Capto C6 Število orodij v reviziji 120 Avtomatski podajalnik palic Irco-Breuning ILS-MUK Za vsa vprašanja glede stroja ter za dogovor o ogledu nas prosimo, da nas kontaktirate po telefonu ali e-pošti. Poglejte si tudi naše druge oglase, da dobite celovit pregled naše zaloge.