Glaesner Tovarna Za Peskanje nakup rabljenega (84.378)

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Operating pressure: 12 bar Tank volume: 200 l Dcodpfxsvvvrpj Aplog Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter)

Stanje: rabljeno, Technical details: Material diameter (min-max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 units Blasting hours: approx. 200 Space requirement: total height approx. 4.5 m Connected load: approx. 40 kW CONTINUOUS SPRING SHOT BLASTING SYSTEM (SPRING HARDENING) Application: For the blasting treatment/hardening of springs in a continuous process. The springs are conveyed through the blasting system by means of a drag chain which is exposed to the blasting stream. The conveying speed of the drag chain is adjustable. Very little used, approx. 200 operating hours The system consists of: - Machine housing, internal (high-alloy tool steel – hardened) with replaceable blasting plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Shot chamber length/depth: approx. 2000mm / approx. 670mm Dcedpfxou Nu I Te Apljg - Blast media: steel shot Ø 0.3 – 0.8mm - Material to be processed: springs Ø 20 – 30mm x L:70mm - Drive power of drag chain 1.1 kW - Conveyor speed max. 15 rpm - Initial shot media load approx. 500 kg (per system) - Connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted at extra cost) i.D.

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), A complete Hosokawa mill for processing polyester resin lumps is available. Entire system: Input material: polyester resin, max. input particle size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3,000kg/h, analysis method: Alpine air jet sieve 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions (L/W/H): approx. 2100mm/2200mm/2300mm, weight: approx. 3,500kg. 2) Automatic dedusting filter AE 48 L, filter surface area: 42m², filter bags: needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, number of cutting tool rows: 4, min. hole size: 3mm, required power: 55kW. Including extraction system, conveyor system, and accessories/peripheral devices. Documentation available. Inspection on-site is possible. Dcedpfx Apovdu N Ajljg

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Two automatic flat glass sandblasting machines from MHG are available. 1) MHG GlasMaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500 mm, max. glass thickness: 70 mm, blasting capacity: 30 m²/h, air consumption per nozzle at 4 bar: 800 l/min. Machine dimensions (L/W/H): approx. 4000 mm / 2800 mm / 1100 mm, weight: approx. 2000 kg, control system: Siemens PLC. 2) Sandblasting machine without type plate, machine dimensions (L/W/H): approx. 3200 mm / 2600 mm / 1100 mm, weight: approx. 1500 kg. Inspection on site is possible. Dcjdpjw Duvhofx Aplog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Dsdpfxjucfwpo Aplecg

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A Gutmann blasting machine, completely overhauled by Rösler in 2019, is available. Documentation is included. An on-site inspection is possible. Dcsdpswftcpsfx Aplsg

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Elementi: elektro omare, strojno ohišje (kabina, turbine, iztok, vtok), oder s pripravo in zalogovnikom, zvočno izolirana kabina, udarni zaboj, vedrovo dvigalo, rešetke, lestev, predhodni udarni zaboj, drobni deli, cevovod, kabelske kanale, peskalno sredstvo in rezervoar za ponovno polnjenje. Priključek za stisnjen zrak: 1/2 palca pri 4-6 bar, poraba stisnjenega zraka: ca. 1,5 m³/h, pripravljen po DIN ISO 8573-1, velikost trdnih delcev: 1 µm, gostota: 1 mg/m³, vsebnost vode: tlakovna rosišče 3°C, vsebnost olja: 1 mg/m³, dolžina: 11.000 mm, višina: 5.907 mm. Z dokumentacijo. Ogled na lokaciji je možen. Djdpfx Aoxtprtopljcg

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Useful diameter: 1000 mm, useful height: 450 mm, max. load: 900 kg, connected load: 7.34 kW, turbine output: 5.5 kW, impeller diameter: 334 mm, throwing blades: 6, discharge velocity: 30 m/s - 70 m/s. Machine dimensions (LxWxH): approx. 3000 mm x 3000 mm x 3500 mm, weight: approx. 2050 kg, operating hours: 2559 h. Documentation available. Inspection on site is possible. Dcedpjvdu N Nefx Aplsg

Stanje: novo, Blasting Cabin Dcjdpfx Apo R Thtoljg Brand: STK Model: PK-690L Condition: New machine Accessories: - Interior lighting - Extraction system with filtration - Pressure regulator with gauge - Pair of gloves - Blast gun with nozzle - Foot switch - Operating manual

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer rotorja: 360 mm, moč: 45 kW (61,18 KM), Material shredder 45 kW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idling - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally available with control cabinet extension for discharge conveyor and overband magnet separator Dcsdpfx Ajt Rivtepleg Complete solution with discharge conveyor in any configuration. Our core competency lies in delivering precisely what the customer really needs. We work together with our customers to develop custom, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnet separator, recycling, wood chips, plastic, non-metallic metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grid, grate magnet, metal separator, block magnet, filtration systems

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Description to follow! Dsdpfexzk Ilex Aplscg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Djdpfxjgmh H Tj Aplecg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Dsdjh S H T Ujpfx Apljcg Throughput is highly dependent on screen and input material: - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net Dcodpfxed Db N Io Aplsg - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Dcedpfjwc Rcnex Aplsg Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 2.438 mm, skupna višina: 2.896 mm, skupna dolžina: 6.058 mm, skupna masa: 3.300 kg, teža obdelovanca (maks.): 5.000 kg, filtrirna površina: 40 m², kapaciteta rezervoarja: 200 l, Oprema: osvetlitev, Ponujamo vam inovativno rešitev! Visokokakovosten High Cube kontejner za notranjo in zunanjo uporabo. Ta kontejner je izdelan iz vzdržljivega Corten jekla, kar zagotavlja vsaj 30-letno življenjsko dobo. Popolnoma je zatesnjen, odporen proti vetru in vodoodporen. Kaj je vključeno? ✔ Tlačna peskalna naprava Premium 200 z ročnim recikliranjem abraziva, primerna za vse običajne večkratno uporabne abrazive. ✔ Integriran filtracijski sistem v kontejnerju (vključno s predločevalnikom udarcev, povezovalnimi elementi itd.). ✔ Prednameščena električna napeljava in LED osvetlitev za takojšnjo uporabo. Robusten, varen in pripravljen za vsestransko uporabo! Ta enota je takoj operativna in zasnovana za različne industrijske aplikacije. Možen prevoz Prevoz je na voljo po dogovoru, cene so določene glede na dnevne tarife. Če vas zanima ali imate vprašanja, me prosimo kontaktirajte! Za več podrobnosti ali ponudbo me lahko kontaktirate neposredno – z veseljem vam bom pomagal! Djdpouiwu Hsfx Aplecg Za povpraševanja ali ponudbe se obrnite na g. Andreasa Wallnerja kadarkoli.

Stanje: novo, SAPI Mammut peskalni stroj s sistemom QUICK STOP™ Industrijski peskalni stroj SAPI Mammut s sistemom QUICK STOP™ je zmogljiva naprava za peskanje, ki se uporablja v industrijah, kot so avtomobilska, gradbena in proizvodna. Namenjen je hitri in učinkoviti pripravi površin, čiščenju in obdelavi kovine, betona in drugih materialov. QUICK STOP™ – Varnost in Zaščita QUICK STOP™ je varnostna funkcija, ki preprečuje nesreče in ščiti napravo pred poškodbami. Takoj ustavi peskanje takoj, ko operater spusti krmilni ročaj, s čimer preprečuje nevarnosti in prekomerno obrabo opreme. Učinkovitost in Vzdržljivost Sistem QUICK STOP™ zmanjšuje porabo zraka in energije, zaradi česar je peskanje bolj ekonomično in učinkovito. Peskalni stroj Mammut je izdelan iz visokokakovostnih komponent, ki zagotavljajo zanesljivo delovanje tudi v težkih razmerah. Vsi naši stroji so CE in TÜV certificirani. Fleksibilnost in Vsestranskost Na voljo v različnih velikostih, da ustreza različnim potrebam peskanja. Združljiv je z več vrstami abrazivov, od standardnega peska do plastičnih in kovinskih granulatov. Mammut s sistemom QUICK STOP™ je idealen za pripravo površin, čiščenje in odstranjevanje rje, barve in premazov. Natančnost in Enostavna Uporaba Mammut s sistemom QUICK STOP™ omogoča natančno nastavitev tlaka med delovanjem, kar zagotavlja dosledne rezultate in visoko natančnost. Opremljen je tudi z lahko dostopnimi točkami za pregled in vzdrževanje. Maksimalna Varnost Sistem QUICK STOP™ z varnostnim stikalom zagotavlja najvišjo varnost pri uporabi. Prav tako preprečuje nabiranje vlage v stroju, saj ohranja konstanten tlak tudi po zaustavitvi peskanja, kar ni mogoče pri običajnih vklop/izklop sistemih. Popolna Oprema Vsi Mammut peskalni stroji s sistemom QUICK STOP™ so popolnoma opremljeni in vključujejo: ✔ Peskalno cev Dcjdpfx Apeupyw Ejlsg ✔ Šobo za peskanje ✔ Regulator tlaka ✔ Ločevalnik vode ✔ Dozirni ventil za abraziv ✔ Osnovno osebno zaščitno opremo

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. Dcjdpswc Nrnefx Apleg The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film.

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Control panel: Siemens SIMATIC HMI, operating hours: 2169 h, with MHG 1703-2.2 dust extractor and extensive accessories. Dsdpfx Aelubvbjplscg

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Includes aggregate scale, cement scale, water scale, additive scale, special components scale, fitter mixer, and Biotronik control unit. Documentation available; on-site inspection possible. Dedpfxsq Ttz To Aplecg

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Connected load: 104 kVA, operating hours: 18,775 h, the chain of the track rail system was renewed in 2018. Dcedpsl Ax Tvofx Apljg

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, obratovalne ure: 4.000 h, Funkcionalnost: omejena funkcionalnost, Stroj za peskanje plošč in europrofilov. Delovna širina: 2,6 m, delovna višina: 0,5 m. Dovodni in izhodni motorizirani valji po 12 m. Stroj je v delujočem stanju, vendar potrebuje strokovnjaka za določene obnove. Že izvedene obnove: - nov motor za odsesovalni ventilator - nova rezila turbine - zaščitne plošče v notranjosti skoraj kot nove Dcjdpfxsvgbcuo Apleg - nov jermenski trak dvigala - nova sklopka med eno turbino in motorjem Potrebna popravila: - elektro omara (stroj že deluje z novim krmilnim sistemom, stara krmilna plošča ni nastavljena in ni funkcionalna) - popravilo krtače (obstaja, a je v okvari – trenutno je ne uporabljamo) - električne povezave in senzorji (nekateri so vgrajeni, vendar se jih ne uporablja)

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.320 mm, skupna širina: 1.600 mm, skupna dolžina: 1.600 mm, moč: 15 kW (20,39 KM), SPYRA drobilnik ostružkov - Za drobljenje ostružkov s tujki - Po želji z garancijo! - Popolnoma pripravljen za uporabo Djdow N Rv Tspfx Aplocg - Tujki v ostružkih pri tem stroju niso težava, saj je bil posebej zasnovan in patentiran prav za ta namen. Zmogljivost: 0,6 - 1,2 m³ / uro Količina pretoka je odvisna od vrste materiala, njegove sestave in števila tujkov.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, skupna masa: 68 kg, pritisk: 10 letvica, vhodna napetost: 230 V, dolžina paketa cevi: 5.000 mm, CRYONOMIC COB62+ maszyna do czyszczenia suchym lodem. Maszyna pokazowa używana przez dystrybutora w Polsce do celów demonstracyjnych, stan jak nowy. Przepracowane ok. 20 godzin pokazów. W zakresie dostawy: urządzenie, wąż 5 m, pistolet ze standardową dyszą. Maksymalne ciśnienie robocze: 10 bar. Dsdjq Rvakjpfx Apljcg Zużycie powietrza: 0,5 – 5,5 m³/min. Zużycie suchego lodu: 20 – 80 kg. Możliwość zastosowania dodatkowego modułu ściernego do bardziej agresywnego czyszczenia. Możliwość zastosowania oświetlenia LED do pistoletu. Prosta i niezawodna obsługa oraz konstrukcja oparta na ponad 30-letnim doświadczeniu w produkcji sprzętu do czyszczenia suchym lodem. Wyprodukowane w Belgii.