Biesse + Formetal Akron 1440 A nakup rabljenega (80.189)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0062 - Koda proizvajalca: 6314A0111 - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Združljiv stroj: CNC BIESSE ROVER 23/24/27/30/346 - Če ste zainteresirani, nudimo storitev obnove, kontaktirajte nas. Teža in dimenzije za prevoz: 2,5 kg 20x20x20 cm Fedpfx Aovu Auujprjpk

Stanje: rabljeno, Leto izdelave: 2010, moč: 17,1 kW (23,25 KM), vhodna napetost: 400 V, vhodni tok: 44 A, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 4.320 mm, pomik osi Y: 1.326 mm, pomik po osi Z: 170 mm, število osi: 5, število mest v zalogovniku orodij: 33, skupna masa: 6.700 kg, Oprema: CE označba, Biesse Rover C 6.50, konfiguracija 3, CNC obdelovalni center, 5-osni Opis Numerično voden obdelovalni center ROVER C 6.50 Delovna površina – konfiguracija 3: X = 4600 mm; Y = 1535 mm; Z = 275 mm Varnostne naprave v skladu s standardom CE 8 nosilcev za plošče – L = 1525 mm – 32 drsnih podstavkov Samodejno pozicioniranje 8 nosilcev za plošče in drsnih podstavkov (EPS X-Y) Tračni transporter za odvoz ostankov in odpadnega materiala Pnevmatski sistem za zaklepanje, razdeljen na 2 delovna območja v smeri X 8 zadnjih referenčnih omejil z gibom 115 mm 8 omejil z gibom 140 mm, nameščenih na razdalji 1175 mm (L = 1280 - 1525 - 1800 mm) 4 stranske omejila z gibom 140 mm (2 levo + 2 desno), vključno s pnevmatskim sistemom 4 odstranljiva središčna omejila z gibom 140 mm (2 levo + 2 desno), vključno s pnevmatskim sistemom Senzor za zaznavanje spuščenih omejil Pnevmatski sistem za dviganje nosilcev palic z dvojnim pnevmatskim gibom 6 nosilcev palic z dvojnim pnevmatskim gibom (V = 74 mm), univerzalne sponke Vakuumska naprava s črpalko, kapaciteta 250 m3/h Fjdszqdmajpfx Aprjpk 1 x rotacijska vakuumska črpalka, kapaciteta 250 m3/h, za standardni vakuumski sistem Kompozicija C3-A1 Krmilna enota s 5 interpoliranimi osmi Predpriprava za montažo deflektorjev za odvajanje žagovine s pnevmatskim ali induktivnim senzorjem na 5-osni krmilni enoti Kompozicija C3-P2 Verižni menjalnik orodij z 33 mesti, razmak med mesti 120 mm Železni prijemalnik na verižnem menjalniku orodij za deflektor za odvajanje žagovine, združljiv s 5-osno elektro vretenom Desni deflektor za odvajanje žagovine za 5-osno krmilno enoto Enota za tekočinsko hlajenje za sisteme s tekočinskim hlajenjem Samodejni sistem za mazanje Posodobitev programske opreme iz stroja BiesseWorks Basic v stroj BiesseWorks Advanced CE (Kljub naši veliki pozornosti si pridržujemo pravico do sprememb, napak v tehničnih podatkih, cenah in vseh informacijah. Brez jamstva za natisnjene podatke! Dostopnost je odvisna od predhodnih prodaj.) (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Cene brez stroškov oglaševanja na portalu MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Najboljši stroji za obdelavo lesa iz Nizozemske Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam 3-osno CNC obdelovalni center Biesse Rover A3.30 z mizo za prečno premikanje. Letnik izdelave: 2006. Konfiguracija: 3-osna glavna vretena HSD Orodjarna z 14 mesti ISO30 na glavi 1 x utorni žaga v smeri X Vrtalna glava 14 + 4 + 2 vretena Uporabna delovna površina 3130 x 1250 mm 2 delovni površini, 4 območja za vpenjanje Sistem Uniclamp vključen Fsdjzmnzmspfx Aprspk Avtomatski sistem centralnega mazanja Skupna moč 17 kW Programska oprema Biesse Works z navodilom za uporabo. Črpalka Becker 110 m3/h, 2,4 kW Dodatni vakuum za delo z šablonami ali dodatne naprave za vpenjanje. Dobro stanje. Na voljo takoj iz skladišča. Potrebno popravilo: ročaji na mizi za prečno premikanje, rotacija orodjarne ISO30 na glavi.

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam širokopasovno brusilno napravo Biesse Regal 520 - 1350, izdelana leta 2006. Konfiguracija: 1 kos elektronske segmentne brusne glave 1 kos elektronske segmentne brusne glave Delovna širina 1350 mm. Pritiskni valji za kratke elemente. Pnevmatsko čiščenje za obe enoti. Fodpfozkmdhjx Aprspk Skupna teža 3050 kg. Stanje zelo dobro. Na voljo takoj.

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: BM0000029, model krmilnika: WINDOWS XP, število vreten: 42, višina plošče: 60 mm, dolžina plošče: 2.800 mm, širina plošče: 1.300 mm, No reserve price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowelling, equipped with an additional robotic arm for feeding! Machine collection must take place between 10.06.26 and 30.06.26! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R X-axis working range: 2,800 mm Y-axis working range: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel pass-through height: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes of milling spindle: 3 Automatic tool change: Yes Number of magazine positions: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light barriers 2. KUKA KR 180 L100-2 K 2000 Max. panel width: 1,300 mm Max. panel length: 2,800 mm Max. payload: 100 kg Fodpfsy Uvnasx Aprspk Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system HONEYWELL barcode reader Safety net on the machine The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8530

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Robna lepilka BIESSE Jade 340 Predhodna obdelava s rezkanjem Lepilna enota Fsdjzcxyyjpfx Apropk Odrezovalna, kotna enota Radialni ciklin Ciklin za lepilo Polirni agregati Razpršilni ventili spredaj in zadaj Dodatni zamenljiv lepilni lonec Naprava je v stalni uporabi. Letnik proizvodnje: 10/2018.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Komponente ADVANTAGE C prečni podajalnik: avtomatski ROTACIJSKA NAPRAVA (flipar): na voljo BIESSE FTT: s 4 glavami, vrtanje in rezkanje, avtomatska menjava orodij BIESSE FHT: 2 DELOVNI ENOTI za vodoravno vrtanje in vstavljanje moznikov WANDRES: krtačno čiščenje od zgoraj ADVANTAGE SC prečni odvzemnik: avtomatski Dimenzije plošč Dolžina plošče: 240 – 3.200 mm Širina posamezne plošče: 140 – 1.550 mm Širina plošče: 140 – 800 mm Debelina plošče: 12 – 60 mm Vrtalne enote Vrtalne glave FTT 800: 2 obdelovalna centra s 4 vrtalnimi enotami – 5 delovnih miz Navpična vretena (v smeri X): 14 neodvisnih na glavo Navpična vretena (v smeri Y): 18 neodvisnih na glavo Vodoravna vretena (v smeri X): 3 neodvisna, z dvojnim izhodom Vodoravna vretena (v smeri Y): 3 neodvisna, z dvojnim izhodom Fodpfx Asy Ui Rnsprjpk Sistem menjalnika orodij Revolverski nosilci: 2 Pozicij v kaseti: 56 Uporaba: Avtomatska menjava orodij navpičnih vreten na 4 vrtalnih enotah dveh obdelovalnih centrov A in B. Rezkalna vretena Elektro vreteno 1: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Elektro vreteno 2: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Lateralne pozicionirne enote Delovna mesta: 2 za vzporedno obdelavo identičnih ali zrcalno obrnjenih plošč Levi pozicionirni element: fiksiran za bočno referenco Desni pozicionirni element: pomičen v smeri X, na spodnjih nosilcih, linearno voden Nastavljanje: avtomatsko glede na X-dimenzijo plošče Pogon: brezkrtačni motor z digitalnim nadzorom Funkcija: zaznavanje dejanske dolžine X v obdelovalnem centru, avtomatska korekcija vrtalnih pozicij Maks. hitrost premika: 120 m/min Nakladanje in razkladanje Vhodni sistem: 1 pasovni transporter s prečnim dovodom, lasten pogon Izhodni sistem: 1 pasovni transporter s prečnim izhodom, lasten pogon Dodatno: čistilni ventilator v območju izhoda Vrtalne glave FHT (vodoravne): Obdelovalni centri z 2 delovnima enotama (1 LH / 1 RH enota) – 3 delovne mize. VODORAVNE VRTALNE ENOTE s 24 neodvisnimi vreteni za montažo na 2 delovni enoti VODORAVNE VSTAVITVENE ENOTE Z 5+5 APLIKATORJI LEPILA IN VLOŽKI ZA MOZNIKE PREMERA 8 mm DRŽALO ZA ORODJA za hitro menjavo vreten vrtalnih enot ENOTA ZA VBRIZGAVANJE LEPILA IN VSTAVLJANJE MOZNIH 8 mm: za vgradnjo moznikov premera 8 mm in dolžine 25-35 mm (enota je predpripravljena za te dimenzije). Potrebne so enote za vstavljanje moznikov premera 8 mm. OPOMBA: Enota za vstavljanje moznikov ni bila nikoli uporabljena in ni testirana. Preskus ni mogoč. ADVANTAGE C 3200 TRASV. 1 POS – nakladanje ADVANTAGE SC 3200 TRASV. 1 POS – razkladanje Varnostne lastnosti Standardi: CE skladni Varnostna oprema: obsežna zaščitna ohišja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 1000028110, Funkcionalnost: popolnoma funkcionalen, moč: 12 kW (16,32 KM), potovalna razdalja osi X: 2.600 mm, pomik osi Y: 900 mm, pomik po osi Z: 60 mm, dolžina obdelovanca (maks.): 2.600 mm, širina obdelovanca (maks.): 900 mm, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj vrhunski vertikalni CNC obdelovalni center. Stroj je bil kupljen nov, smo prvi in edini lastniki, kar zagotavlja jasno zgodovino vzdrževanja in uporabe. Stroj je v popolnoma delujočem stanju, izjemno ohranjen, brez dodatnih vlaganj. - Delovno območje x/y/z: 2600-900-60mm - Delovna glava z BH17 vrtalno glavo (10 horizontalnih in 6 vertikalnih svedrov) Fedoy Sfw Espfx Aprspk - Hitrost do 65 m/min - Krmiljenje BSolid - Avtomatsko lasersko branje dimenzij

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj za obdelavo robov Proizvajalec: Biesse Tip: Akkron 440 Letnik proizvodnje: 2011 Fodpfx Apjzltbiorepk Debelina robov: 0,4–3/10 mm Debelina obdelovanca: 10–60 mm Hitrost podajanja: 18 m/min Nastavitev debeline obdelovanca: električna Skupna dolžina: pribl. 5.100 mm Agregat za lepljenje: da Agregat za rezanje: da Agregat za obdelavo robov: da Agregat za obdelavo vogalov: da Nož za obdelavo zaobljenih robov: da Nož za obdelavo ravnih robov: da Agregat za poliranje: da Naprava za brizganje: da

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, BIESSE BREMA EKO 2.2 je nova, kompaktna in vsestranska vertikalna vrtalna naprava z manjšimi dimenzijami, namenjena obdelavi plošč različnih debelin in velikosti. Idealna rešitev za proizvodnjo »just-in-time«, tudi pri najbolj zahtevnih postopkih rezkanja. TEHNIČNI PODATKI: Dimenzije plošče: Dolžina plošče (X): 200 – 3200 mm, Širina plošče (Y): 35 – 1250 mm, Debelina plošče (Z): 8 – 60 mm, Fpsdpfxownx Ivs Aprok Največja teža plošče: 50 kg, HP komplet za pospešeno upravljanje prijemal za rokovanje s ploščami. Omogoča hitrost premikanja do 110 m/min s hitrimi pospeševalnimi rampami, BH28 Zgornja vrtalna enota s 17 vertikalnimi vreteni + 5 horizontalnimi + 1 utorno žago Ø 120 mm Elektro-vreteno 11 kW z adapterjem HSK-F Naprava za stransko premikanje l=2200 mm, ki omogoča vračanje plošče do operaterja + izhodni transporter, Lasersko merjenje v osi Y (širina kosa) Komplet za občutljive površine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, moč: 40 kW (54,38 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, vrsta nastavitve višine: električni, hitrost pomika os X: 30 m/min, Oprema: CE označba, dokumentacija / priročnik, Biesse STREAM B MDS 2.0/15.0 Fedpfx Apeyu S Iuoropk

Stanje: zelo dobro (rabljeno), 4-Achs (X-Y-Z-C) CNC-Bearbeitungszentrum zum Fräsen, Bohren, Schneiden und Kantenanleim. Schwanenhals Maschine PC-Steuerung Typ ?? / Software Biesse Works Nr. 1 Arbeitstische zur Unterstützung/console Nr 10 ATS (L = mm 1800) Automatischer WechselSystem der Werkzeugen (Lager/Fach Nr. 14) Nützliche Arbeitsbereich (X - Y - Z) mm 6735 x 1650 x 290 Nützliche Arbeitsbereich (X - Y - Z) in Verleimung mm 5780 x 1650 x 60 Nr 2 Arbeitsbereiche - Vakuumpumpe (Kapazität m3 / h) 250 Fpjdpey Nk R Esfx Aprjk Sicherheitstrittmatten Vorder Motorisierte Teppich, um die Abfälle aus dem Arbeitsprozess zu evakuieren Gesamtanschlusswert Kw 31.13 Arbeitsgruppen (Oben) Nr. 20 Unabhängige vertikale Bohrspindeln Nr. 8 Unabhängige horizontale Bohrspindeln Nr. 1 Vertikaler Frässpindeln HSK F63 (Kw 13,2) Nr. 1 Rundsäge Verleimaggregat (Leim Hot Melt) Rollenmaterial (Kanten) Dicke (min/max) mm 0,4 - 3 Kantenmagazin für Rollen (fach Nr. 4)

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 1000023651T, Funkcionalnost: popolnoma funkcionalen, moč: 50 kW (67,98 KM), vhodna frekvenca: 50 Hz, največja višina reza: 95 mm, največja širina rezanja: 3.200 mm, Oprema: dokumentacija / priročnik, Kotni žagarski center Selco WNAR 6. Fodpfx Aszl T Hljprspk

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Fsdoyq Avhepfx Aprjpk Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: rabljeno, BIESSE SAND REGAL 1350 je industrijski širokotrak brusilni stroj, namenjen za kalibracijo in fino brušenje ploščatih kosov v pohištveni in ploščni industriji. Serija REGAL predstavlja robustno proizvodno rešitev, primerno za srednje in velike proizvodne obsege. Stroj je zasnovan modularno in omogoča kombinacijo kalibracijskih ter končnih obdelovalnih operacij v enem prehodu, kar občutno poveča produktivnost. Fjdpfx Apjynb Rfsrepk

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 Fpedpfji Rbg Tsx Aprek X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, including for NARROW PARTS min. 65 mm, with high-speed conveying technology, No. 3 CNC-controlled through-feed drilling machines (one for lateral drilling in longitudinal direction), and No. 1 through-feed crosscut saw (splitter) Comprising the following machines: W05024A) Loading device (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st Single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd Single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st Turning device (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN Fpjdpfstr Envex Aprsk W05024H) 2nd Turning device (90° TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" W05024K) Dust extraction and cleaning machine "WANDRES" W05024L) Stacking device (gantry) "RBO (BIESSE)" model Winner SC

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: Fpodottgy Hepfx Aprjk A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance Fpsdpfecr U Urjx Aprok SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor Fpjdpfod Nviqex Aprsk VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units Fpedeg Urn Espfx Aprek CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 Fjdod Tyvxjpfx Aprjpk - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 Fsdpfx Apoh T Dvtsrjpk KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) Fjdpfx Apju Tg Uqsrjpk EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 Fpedpfx Apshvah Nsrsk C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.