Arburg 370S 600-100 nakup rabljenega (33.810)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) Gjdpfx Afoyxdwdewsub • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Stanje: dober (rabljeno), Tehnični podatki za prečko paletnega regala: Regalni sistem: META Thyssen V obsegu dobave je vključeno: 01x prečka paletnega regala, rabljena Barva materiala: rumena Tip prečke: HN 100|20 Škatlasti profil: 100 x 50 mm Agrafa: 3 HK (kavlji) Svetla razdalja: 3.600 mm 02x varnostni zatiči, rabljeni Izvedba: v celoti pocinkani Za zavarovanje vzdolžnih nosilcev proti nenamernemu dvigu Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Guedpfx Afey Akh Rjwsb Ta artikel je na voljo samo za osebni prevzem. Za dodatni prevoz ali pošiljanje tega artikla nastanejo dodatni stroški, ki jih lahko individualno preverite glede na kraj dostave oziroma obseg pri nas.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 22.626 h, vpenjalna sila: 100 kN, premer vijaka: 25 mm, Machine hydraulique de moulage par injection datant de 2014. Cette Arburg 470 H 1000-170 dispose d'une force de fermeture de 100 tonnes et d'un diamètre de vis de 15/25 mm. Elle est équipée d'une unité de sélection et d'une conception à plaque unique avec un espacement des colonnes de 470 x 470 mm. Si vous recherchez une machine de moulage par injection de haute qualité, la Arburg 470 H 1000-170 que nous proposons à la vente mérite votre attention. Contactez-nous pour plus d’informations. • Unité de sélection : oui • Plaque unique : oui • Espacement des colonnes : 470 x 470 mm • Heures de fonctionnement : 22 626 h • Électrique : • Tension de service : 400 V, 3~, 50 Hz • Tensions de commande : 230 V, 50 Hz ; 24 V~ • Courant nominal moteur/chauffage : 80 / 58 A Godsytqlcspfx Afwsub • Courant nominal total : 138 A • Puissance totale installée : 75 kW • Remarque sur l’état : petit problème de servomoteur Équipement supplémentaire • Système de manipulation Geiger (en option)

Stanje: rabljeno, Leto izdelave: 2002, Stroj je v dobrem stanju in ga je mogoče po dogovoru pregledati v delovanju. Razpoložljivost: 06/2026 Celoten tehnični opis je v priloženem dokumentu. Opomba: Na voljo imamo še 5 dodatnih strojev istega tipa (Allrounder 420C 1000-250). Za več informacij nas kontaktirajte. Zatezna sila: 1000 kN Odpiralna sila: 35/250 kN Odpiralni hod: 500 mm Najmanjša višina kalupa: 250 mm Največja razdalja med ploščama: 750 mm Izmetalna sila: 40 kN Hod izmetalca: 175 mm Guedpsyx D Ayefx Afwsb Tlak vbrizga: 2470 / 1820 / 1390 bar Premer polža: 30 / 35 / 40 mm

Leto izdelave: 2003, stanje: dober (rabljeno), For sale is a 2-component injection molding machine from Arburg, model 420 C. The machine comes from a facility with a strong focus on maintenance and cleanliness. All maintenance and repair work is performed promptly by qualified personnel. - Arburg 420C 1000-150/60 - Clamping force: 1000 kN - Year of manufacture: 04/2003 - Screw diameter: 2x Ø25mm installed - 9x mold heating circuits - 2x hydraulic core pulls - 1x pneumatic needle shut-off - 9x temperature sensors - 1x mold cavity pressure sensor - Current operating hours: approx. 36,684 Additionally available: 1x spare cylinder Ø18mm for secondary injection unit Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Guedpjlwxpisfx Afweb Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your equipment? For more information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 54.454 h, premer vijaka: 25 mm, Stroj Arburg 470 H 1000-170 je bil izdelan leta 2014. Gre za hidravlično brizgalno maso s zapiralno silo 100 t in premerom polža 25 mm. Deluje pri 400 V 3~, 50 Hz s skupno priključno močjo 75 kW. Idealen za natančne brizgalne aplikacije. Za več informacij o tem stroju nas kontaktirajte. • Polž: 25 mm • Obratovalna napetost: 400 V, 3-fazno, 50 Hz Gjdpox D Rcuofx Afwjub • Krmilna napetost: 230 V, 50 Hz; 24 V AC • Nazivni tok motorja: 80 A • Nazivni tok grelca: 58 A • Skupni nazivni tok: 138 A • Skupna priključna moč: 75 kW • Leto kalibracije: 2027 • Opcijsko: Geiger ravnanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, skupna masa: 5.900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine comes equipped with a take-out robot and an enclosure with a FilterFanUnit that ensures clean operation. It is ideal for precision plastic processing and offers a mold height of 250 mm and a platen spacing of 825 mm. Contact us for further information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Highlights: • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle, 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-driven with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration Guodpfxox D E Dye Afwob • Programmable, controlled nozzle contact pressure (1st injection unit) • Central 125 mm clamping platen set • Machine raised by 100 mm (elevated oscillation elements) • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mold • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby function • Sound pressure level: 70 dB(A) | ±3 Additional Information Screw diameter: 400 units: 35 / 40 / 45 mm Injection pressure (max.): 400: 2500 / 2000 / 1580 bar Shot weight (max. g PS): 400: 141 / 184 / 232 g Heating capacity 400: 9.7 kW | 5 zones Net machine weight: 400: 5900 kg

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements driven by servo motors, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we are offering for sale. Please contact us for more information about this machine. • Drive technology: • Electromechanical main movements via servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, highly wear-/corrosion-resistant; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-controlled, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for installation of a linear robot on the fixed platen • Tool protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, controlled and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, control cabinet, interfaces: • Selogica control system • Software packages (Pos 555: Advanced mechanical cycle control; Advanced movements; Production control; Optimization/operator assistance; Quality control; Documentation) • Temperature-controlled control cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) Gedpfxsx D Hgvj Afweub • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mould temperature measurement zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm mould temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Additional equipment • Programmable electric conveyor belt (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 Godoydpvbopfx Afweub • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 68.463 h, premer vijaka: 35 mm, Ta Arburg 470 E 1000-700 je bila proizvedena leta 2011. Je robusten električni brizgalni stroj z zapiralno silo 100 ton in premerom polža 25 mm. Obratuje na 400V 3~, 50Hz in ima skupno priključno moč 78 kW ter je zasnovana za učinkovito delovanje. Izkoristite priložnost za nakup tega električnega brizgalnega stroja Arburg 470 E 1000-700. Za več informacij nas kontaktirajte. • Obratovalna napetost: 400 V, 3-fazno, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V AC • Nazivni tok motorja: 61 A • Nazivni tok gretja: 58 A • Skupni nazivni tok: 119 A Gusdjx D Rndjpfx Afwsb • Skupna priključna moč: 78 kW • Kalibracija (leto): 2027 • Izbirna enota: da • Posamezna plošča: da • Razdalja med stebri: 470 x 470 • Po želji: Geiger ravnanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, injekcijska masa: 132 g, skupna masa: 3.650 kg, Ta Arburg Allrounder 420C 1000-290 je bila izdelana leta 2014. Ima zapiralno silo 1000 kN, hod odpiranja 500 mm in vpenjalno površino 570x570 mm. Največja brizgalna masa je 132 g. Razmislite o možnosti nakupa tega hidravličnega stroja za brizganje Arburg Allrounder 420C 1000-290. Za več informacij nas kontaktirajte. • Hod odpiranja: 500 mm Gusdpfxsyglrws Afwsb • Velikost vpenjalne plošče: 570 x 570 mm • Maks. volumen: 144 cm³

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, For sale is an injection moulding machine from the brand Arburg, model 470 C 1600-800. The pump and a control card have been removed from the machine, so it is being sold as defective. Other than that, the machine is in very good condition. Technical data: Pump hours: 61,400 Clamping force: 1,600 kN Clear tie bar spacing: 470 x 470 mm Ejector stroke: 225 mm Screw diameter: 50 mm Shot volume: 398 cm³ Dimensions: 4,335 x 1,635 x 1,950 mm Weight: 6,950 kg The machine is offered without peripherals. Transport and loading can be organised Europe-wide at additional cost upon request. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Guedpfov Edrijx Afwjb Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, For sale is an injection moulding machine from Arburg, model 420 C 1000-150/60. Gjdpfxsx E U Els Afwsub The machine is in excellent and fully functional condition, very well maintained. The machine is offered without peripherals. Rotary table, material feed, temperature control units, and other accessories are not included. Technical specifications: - Year of manufacture: 2001 - Clamping force: - Clear tie bar spacing: 420 x 420 mm - Opening stroke: 500 mm - Minimum mould installation height: 250 mm - Platen size: 570 x 570 mm - Ejector stroke: 175 mm - Screw diameter: 25 mm - Theoretical shot volume: 54 cm³ - Shot weight: 45 g/PS Upon request, we can organise transport and loading throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Gujdpfx Asxirqqjfwob Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, odmični hod: 500 mm, Naprodaj je brizgalni stroj znamke Arburg, tip 420 C 1000-150/60. Stroj je tehnično brezhiben in zelo dobro vzdrževan. Tehnični podatki: Leto izdelave: 2001 Sila zapiranja: 1000 kN Gjdjx Itamjpfx Afwoub Razdalja med stebri: 420 x 420 mm Odpiralna pot: 500 mm Višina za vgradnjo orodja: 250 mm Pritrdilna plošča orodja: 570 x 570 mm Pot izmetalca: 175 mm Premer polža: 25 mm Izračunana prostornina hoda: 54 cm³ Teža izstrelka: 45 g/PS Stroj se prodaja brez periferne opreme. Rotacijska miza, transport granulata, termoregulatorji in ostala oprema niso vključeni.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.000 kN, premer vijaka: 80 mm, tlak vbrizgavanja: 2.500 letvica, For sale is an Arburg 820S 4000-2100 injection molding machine, serial number 195746. The unit is in good condition. Technical Data: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820 × 820 mm Platen size: 1171 × 1171 mm Max. mold installation height: 850 mm Max. opening stroke: 700 mm Max. daylight: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Max. weight of moving mold half: 4500 kg Hydraulic pump drive power: approx. 55 kW Guodpfexxi Nvsx Afwsb Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzle Net weight: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Automatic operation hours: 58,556 Transport and loading can be organized across Europe for an additional fee, upon request. All prices exclude VAT. Inspection by appointment is possible. Please contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to get in touch, please visit our website.

Stanje: dober (rabljeno), številka stroja/vozila: 181825, vpenjalna sila: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (≈80 tonnes) - Tie bar distance (H x V): 370 mm x 370 mm, clear space between tie bars - Mounting platens (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould installation height: min. 250 mm (sometimes min. 200 mm, depending on configuration) - Maximum platen distance: approx. 650 mm to 750 mm, depending on the minimum mould installation height - Ejector force: typically approx. 35 kN Transport and loading can be organised Europe-wide upon request, at an additional cost. Prices exclude VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Gedpfx Afsxt E Tyswoub Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet reasonably priced metalworking machine for your production? Or are you looking to sell your machine? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2016, Brizgalni stroj za plastiko Tip: Arburg 820S 4000-4600 Leto izdelave: 2016 Prostornina brizga za PP = 2850 ccm Gusdpfx Ajyqwfdofweb Teža brizga za PP približno 2450g Stroj se prodaja brez dodatne opreme, manipulacije ali ograje – torej zgolj stroj.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Guedpeu E E Suefx Afweb Tie bar spacing: 420 x 420 mm Min./max. mould installation height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Injection moulded part weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Injection moulded part weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year: 2010 - Conveyor belt - Safety fence

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Adixen AD30K Dry Pump, High Vacuum The new high-performance dry-running pumps: The ADH series is specifically designed for solar applications and developed for the demanding processes found in the semiconductor and LED industries, featuring a pumping speed of 600-4500 m³/h. Semiconductor: High H2 pumping rate The performance of the ADH series offers the following process advantages: - ADL process performance: high pumping efficiency of light gases enables faster chamber evacuation between process steps - Epitaxy and EUV: high suction capacity and flow rate tolerance meet the most demanding process specifications Adixen AD30K Dry Pump, High Vacuum, AD 30 KL Manufacturer: Alcatel Adixen Model: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Model: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Model: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 Hz Max. pumping speed: 4035 m³/h Max. speed: 5920 rpm Motor power S1/S6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Model: BF ADP122 Year of manufacture: 2008 Power: 1.5 kW Max. pumping speed: 95 m³/h Max. continuous intake pressure: 50 mbar Max. exhaust overpressure: 1200 mbar Cooling water: 60 l/h Pump speed: 3000-3600 rpm Operating temperature of the pump: 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Guedpsikq Tyjfx Afweb Exhaust flange: DN 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, 1 used injection moulding machine with robot Manufacturer: ARBURG Model: 420C1000-350 Year of manufacture: 1999 Clamping force: 100 tons Gsdpfx Aju E E Hlsfwsub Tie bar spacing: 420 x 420 mm Screw diameter: 40 mm Shot volume: 182 cm³ Shot weight: 172 g/PS Control system: SELGOCIA Equipment: - Robot, manufacturer: GEIGER, model: LR21, year: 1998 - 2 x core pullers

Stanje: rabljeno, Leto izdelave: 2017, Injection moulding machine Arburg 470S 1100 290, year of manufacture 2017 2K machine The machine has been out of operation for a longer period. It was built in 2017 and has only around 21,600 operating hours. The machine features a clamping force of 1,100 kN, with a 290 unit and 35 mm barrel installed below, and a 100 unit with 30 mm barrel above. Only ABS and TPE have been processed so far. The machine includes an integrated hot runner, three core pulls, and other options. Also included is a Kuka handling system, operated via the machine’s Selogica control, and the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Gusdpfjw D R N Rjx Afwob

Stanje: rabljeno, Leto izdelave: 2010, Brizgalni stroj Arburg Allrounder 470 H 1000-170, letnik 2010 Guedew E Ev Uspfx Afwob Zapiralna sila: 1000 kN Premer polža: 30 mm Dolžina polža: 930 mm Teža brizga: 77 g Z robotom Arburg Stroj si je možno kadar koli ogledati pod napetostjo!

Stanje: dober (rabljeno), Leto izdelave: 2000, Arburg 420 C 1000-250 (2000) Zapiralna sila: 100 t Premer polža: 30 mm Razmak med stebri: 420 x 420 mm Teža izstrelka: 100 g Delovne ure: 134.000 h Gedpfx Asxqcrzefwjub

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm Gsdpfx Aep Audqsfweub INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002