Pm 1000 nakup rabljenega (11.639)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stružnica za obdelavo okroglih delov Seiger SLZ 1000 Letnik izdelave 2009 Razdalja med centri 3000 mm Premer obdelovanca nad posteljo 1010 mm Premer obdelovanca nad podporo 650 mm Moč motorja pri 100 % delovnem ciklusu 37 kW, pri 60 % delovnem ciklusu 52 kW Maksimalni navor približno 9000 Nm Ljdpfxeu T Dryo Af Aehl Število vrtljajev 5–900 vrt/min Maksimalna sila podajanja v smeri X 240000 N Maksimalna sila podajanja v smeri Z 16000 N Nadzorni sistem Heidenhain Manual Turn Opremljena s strojno ploščo in podporo Teža približno 19 ton Ponudba je namenjena izključno podjetjem, kot je določeno v členu 14 BGB.

Stanje: rabljeno, KELLENBERGER KEL‑VISTA UR 175/1000 je CNC okrogla brusilnica, zasnovana za natančnost, visoko natančnost in zanesljivost. Kapacitete: višina med konicami 175 mm, razdalja med konicami 1000 mm, največja teža obdelovanca 100 kg; brusilni disk Ø400×63 mm, premer izvrtine 127 mm; hod vodila 50 mm, največji nagib mize 9°. Tehnični podatki: obodna hitrost 35 m/s, vrtljaji 8–800 vrt/min (brezstopenjsko), motor brusilnega vretena 5 kW, hitri hod 12 m/min, konus vretena ASA5/MK5, mere D3200׊1700×V2000 mm. Dodatna oprema: sistem za hlajenje, papirnati filtrirni sistem, komplet brusilnih diskov. Dosega ozke tolerance; primerna za avtomobilsko industrijo, letalstvo, orodjarstvo in medicinsko tehnologijo. Lhedpfxsz Dvzaj Af Ajl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, obratovalne ure: 29.192 h, največja hitrost vretena: 4.000 obr/min, skupna višina: 2.988 mm, skupna širina: 4.288 mm, skupna masa: 9.000 kg, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, največja dolžina izdelka: 4.152 mm, število osi: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 operating hours and comes with manuals and documentation. The safety doors are partially disassembled but included. If you are looking for high-quality machining options, you should consider the MAHO MH 1000 C/A universal machining center we offer for sale. Contact us for further details. Tool interface: ISO 50 Ram travel, vertical spindle: 100 mm Spindle speed range: 20-4000 rpm Spindle speed override: 80–120% Feed rate X/Y/Z: 1–4000 mm/min Feed force X/Z: 8000 N Feed force Y: 24,000 N Rapid traverse: 10 m/min Feed and rapid traverse override: 0–140% Table diameter: 1250 mm Table length: 800 mm Center bore: 42 mm H7 T-slots: 7 Lsdpfsy Hizqox Af Aehl T-slot spacing: 100 mm Manual cross adjustment: 275 mm Table transmission ratio: 1:120 Table rotation per handwheel revolution: 3° Table rotation per index: 2° Positioning resolution: 0.001° Step width per index: 0.026 mm Table tilt X-axis: ±30° Table tilt Y-axis: ±30° Table rotation: 360° Table clamping pressure: 80 bar Max. table load: 800 kg Table weight: 1100 kg Voltage: 220/380 V Frequency: 50 Hz Total connected load: 36 kVA Total power with coolant: 41 kVA Total power with coolant and tool changer: 46 kVA Positioning accuracy: 0.001 mm Approximate machine hours: 29,192 h Condition: currently idle, not in operation Documentation/manuals: available Safety doors: partially disassembled, included Accessories: none Tool holders: not included Table axis: only one axis, cannot reference manually, error present

Stanje: rabljeno, Tehnični podatki: Dolžina mize: - mm Širina mize: - mm Ledezuzr Ispfx Af Ashl Nosilnost mize: - t Višina: 1250 mm Širina: 1000 mm Globina: 800 mm Masa stroja: pribl. 1200 kg Na voljo 2 kosa (cena na kos) v skladu s standardom DIN 650: 6 x T-utora Ob vaši zahtevi navedite, prosim, število želenih pritrdilnih kotnikov. *

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 9.000 kg, največja višina reza: 1.200 mm, največja širina rezanja: 1.100 mm, premer valja: 1.400 mm, skupna širina: 2.100 mm, skupna dolžina: 2.400 mm, vhodna napetost: 220 V, dolžina tračnega lista: 10.450 mm, širina tračne žage: 206 mm, moč: 90 kW (122,37 KM), lastna masa: 19.000 kg, hitrost rezanja: 40.000 mm/min, Oprema: kabina, Prodamo celotno žagalno linijo z vertikalno tračno žago VTZ 1400 PLUS proizvajalca Mebor. Ponudba vsebuje: - Vertikalna tračna žaga VTZ 1400 PLUS proizvajalca Mebor - Robusten transporter za hlodovino z nakladalnimi rokami - Freza za hlode - kanter BM900 proizvajalca Mebor - Kabino za operaterja vertikalne tračne žage Lodpfjxq Rgysx Af Aohl - Valjčne in verižne transporterje - Linijo za robljenje VR800 S proizvajalca Mebor s servo vodenim, visokohitrostnim pozcioniranjem krožnih žag - Dvoosno večlistno krožno žago VC 900 D proizvajalca Mebor - Linijo za odpadke - Sekirasti drobilec odpadkov TH200/500/3 proizvajalca Rudnick & Enners - Linija za sortiranje 47-14 proizvajalca Holzmatic

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen poskus delovanja. 2 KOSI. Lhodpfoz A Ucaex Af Aol

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, moč vretenovega motorja: 46.000 W, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 12.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, obremenitev mize: 25.000 kg, število mest v zalogovniku orodij: 60, število osi: 4, Ta 4-osna rezkalna obdelovalna naprava tipa PAMA Speedram 1000 je bila izdelana leta 2004. Ima impresivno gibljivo pot 12.000 mm po osi X, 4.000 mm po osi Y in 1.000 mm po osi Z. Naprava ima robusten premer vretena 160 mm in največjo hitrost vretena 3.000 vrt/min. Če iščete visokokakovostno obdelavo z rezanjem, razmislite o rezkalno-stružnem centru PAMA Speedram 1000, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Gibljiva pot osi W: 700 mm • Orientacija vretena: horizontalna • Premer vretena: 160 mm • Navor vretena: 2.300 Nm • Presek drsnika: 360 × 400 mm • Hitri pomik X/Z: 25.000 mm/min • Hitri pomik Y: 15.000 mm/min (možnih 20.000 mm/min) • Hitri pomik W: 20.000 mm/min Ledjz D Dlgepfx Af Ajhl • Nosilec orodja: BT 50 BIG-PLUS • Nadzorna plošča: motorizirana Dodatna oprema • Odstranjevalec strožkov • Dovod hladilne tekočine skozi vreteno: 15 l/min, 25 bar • Zunanji dovod hladilne tekočine: 50 l/min, 4 bar • Vertikalna fiksna glava TS 20 M: 30 kW, 2.500 vrt/min • Vstavna miza TG4: 2.000–3.000 mm, nosilnost 25.000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 116.213 h, potovalna razdalja osi X: 245 mm, pomik po osi Z: 1.035 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: T-Plus, število osi: 3, To obdelovalno središče Mazak SQT-30M * 1000 z 3 osmi, ki omogoča struženje in frezanja, je bilo izdelano leta 1998. Ima maksimalni premer struženja 410 mm in dolžino struženja 989 mm. Stroj je opremljen z nadzorno enoto Mazatrol T-Plus in ponuja območje vrtljajev vretena od 35 do 3.300 vrt/min. Če iščete visokokakovostne zmogljivosti struženja, razmislite o modelu Mazak SQT-30M * 1000, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. - Delovne ure: 116.213 ur - Maks. premer nihanja: 560 mm - Maks. območje nihanja nad sani: 500 mm - Maks. premer struženja: 410 mm - Standardni premer struženja: 336 mm - Maks. dolžina struženja: 989 mm - Maks. premer palice: 77 mm - Območje vrtljajev glavnega vretena: 35 – 3.300 vrt/min - Moč motorja glavnega vretena: 26 kW / 22 kW (30 min / 100 % neprekinjen obrat) - Maks. navor vretena: 637 Nm - Nos vretena: A2-8" - Prehodna luknja vretena: 88 mm - Premer vpenjalne glave: 304 mm - Indeksiranje osi C: 0° – 360° / 0,001° - Položaji revolverja: 12 - Velikost gredi orodja za struženje: 25 × 25 × 150 mm - Območje premerov gredi vrtalnega orodja: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm - Čas indeksiranja revolverja: približno 2,2 s - Moč motorja pogonjenih orodij: 7,5 kW - Maks. navor pogonjenih orodij: 96 Nm - Območje vrtljajev pogonjenih orodij: 90 – 1.500 vrt/min - Zmogljivost vrtanja pogonjenih orodij: 23 mm - Zmogljivost navojnega rezanja pogonjenih orodij: M16 (H-nosilec) / M12 (V-nosilec) - Zmogljivost čelnega frezanja pogonjenih orodij: 25 mm - Gib osi X: 245 mm - Gib osi Z: 1.035 mm - Hitri premik osi X: 18 m/min - Hitri premik osi Z: 24 m/min - Hitri premik osi C: 100 vrt/min - Hitrost podajanja osi X/Z: 0 – 5.000 mm/min - Hitrost podajanja osi C: 1° – 2.000°/min - Gib drsalke kontraponta: 130 mm - Premer drsalke kontraponta: 100 mm - Nos kontraponta: MK 4 - Gib kontraponta: 880 mm - Prostornina rezervoarja za hladilno tekočino: 250 l - Pretok hladilne črpalke: približno 20 l/min Lhsdoz D Dfgepfx Af Asl - Tlak hladilne črpalke: 5 bar - Nazivna moč: 52 kVA - Napetost: 400 V / 50 Hz - Tlak stisnjenega zraka: 5 bar, 100 l/min - Potreben prostor: približno 7,7 m² - Teža stroja: približno 9.500 kg - Dodatna oprema in pribor: Tool Eye (naprava za prednastavitev orodij), 3-čeljustna hidravlična vpenjalna glava 304 mm z mehkim/trdimi čeljustmi, zaščitni pokrov za žagovino/hladilno tekočino, delovna luč, sinhronizirano navojno rezanje, nosilci pogonjenih orodij (CAT40, 3x vertikalno, 3x horizontalno), nosilci za vrtalne palice, komplet nastavitvenih orodij, oprema za podstavo Tehnične specifikacije Kontra vreteno: Ne Pogonjena orodja: Da

Stanje: dober (rabljeno), Leto izdelave: 2010, Horizontal bed - Prism/flat guideway hardened and ground Working area - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 700 mm - Cross slide travel (plan): 600 mm Main spindle drive - Digital AC motor – 60% duty cycle: 46 kW Lsdpor D Nmyjfx Af Aehl Gearbox - ZF planetary gearbox, 2 steps - Electrically shifted - Mounted outside the headstock Headstock - Spindle nose DIN 55026, size A11 - Spindle diameter in front bearing: 190 mm - Spindle bore: 132 mm - Spindle taper: metric 140 - Speed range: 1–1800 rpm Cross slide - Feed range transversal: 0.001–1000 mm/rev - Feed range longitudinal: 0.001–2000 mm/rev - Thread pitches: 0.01–999.9 mm - Rapid traverse transversal/longitudinal: 5/10 m/min - From center distance 4000 mm: 5/7 m/min - Automatic central lubrication - Digital AC servo motors (transversal and longitudinal) Tailstock - Quill diameter: 125 mm - Quill stroke: 280 mm - Taper: MK 6 - Clamping on bed with clamping bolts - Quill operation and clamping: manual - Tailstock roller guide

Stanje: rabljeno, Leto izdelave: 2003, Površina filtra: 50 m² Priključek za odsesavanje: 300 mm Dimenzije: 1650 x 1580 x 3550 mm Teža: približno 500 kg Podkonstrukcija z izpustnim vijakom: Motor: 1,5 kW Briquetirna stiskalnica Schuko C 800 - 2 Priključna moč: 3 kW Pretok: približno 35–55 kg/h, odvisno od materiala, z napravo za gašenje Teža: približno 1200 kg. Lhodezb N T Uepfx Af Ajl Lokacija skladišča: Nattheim.

Stanje: rabljeno, dvižna platforma tipa »škarje«, dvižna miza tipa »škarje«, hidravlična dvižna miza – rabljena naprava Celotne mere: Dolžina: 1300 mm Širina: 800 mm Višina: 1100 mm Lhedpfx Afezxn D Sj Aol Mere mize: 1300 x 800 mm Največja nosilnost: 1 tona Električni podatki: 380 V; 50 Hz; 2,2 kW; 2850 vrt/min Nameščena nova hidravlična črpalka.

Stanje: pripravljen za uporabo (rabljen), For sale is a scissor lift table / lifting table with removable castors. Lifting height: max. floor to upper edge (castor) approx. 1250 mm max. floor to upper edge (table) approx. 1150 mm Lower height: floor to upper edge (castor) approx. 400 mm floor to upper edge (table) approx. 300 mm Lhsdehqmivspfx Af Asl Length: approx. 2250 mm Width: approx. 800 mm Load capacity: 1000 kg Self-weight: approx. 850 kg The table is equipped with a safety cut-off switch. Technical data can be found in the pictures. Should you have any questions, please feel free to contact us by phone. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Assembly and electrical connection of the machine/device must be carried out or inspected by a qualified professional. Deviations from technical data as well as errors in the item description can occur and are reserved. Shipping is exclusively for commercial customers – for private consumers, only collection is possible.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface Lhedpouxfucofx Af Aol -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2000, Premer honanja 45 mm Hod 1000 mm Štirivreteni stroj za honanje, prilagojen za honanje puškovih cevi. Območje honanja po podatkih proizvajalca: Premer 5-45 mm Maksimalna dolžina honanja 750 mm Dodatna oprema: Orodja za premer: -10 mm -12,3 mm -13,3 mm Lhodpfxsxddq Ee Af Aol -21,1 mm

Stanje: rabljeno, Leto izdelave: 2000, Premer brusilnega krožja 500 mm Dolžina brušenja 1000 mm Višina med konicama 250 mm Stroj je bil delno obnovljen z novo geometrijo in je bil uporabljen le kratko obdobje, nato pa je bil zaradi stečaja ponovno prodan. -obsežen pregled in vzdrževanje -nova geometrija mize -delno prebarvanje notranjosti Oprema za brusilne krožnike LEVO 400x63x127 mm (standard) Oprema za brusilne krožnike DESNO 300x40x127 mm Notranja brusilna naprava Ø120 mm za vretena HF CNC-nadzor KELCO 120 Osnica C za obdelavo neokroglih površin. Kel-Poly Osnica B: CNC-nadzorovana osnica B KELCO 120: v konstantni hitrosti 35 m/s oz. 45 m/s Visokofrekvenčno vreteno za notranje brušenje Operativna enota za vretena MFV in MFZ Ledexzk Nispfx Af Aohl Hidravlični povratni mehanizem za nastavek BREZ mikro nastavitve na nastavku Prožno vstavljeni nastavek Hlajenje zgornje mize Standardni nastavek za obdelovance MK 5 DIN 55026 velikost 5" MIKRO-nastavitev za standardni nastavek za obdelovance Naprava za nastavitev spodnje mize Aktivno vzdolžno pozicioniranje KELPOS, MARPOSS, nameščeno na brusilni glavi Sistem za merjenje orodij KELSET, MARPOSS Senzor za začetno točko MARPOSS Merilni nadzor MARPOSS Minialsar, pripravljen Filtrirni sistem s papirnatimi trakovi

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Krmiljenje Kelco 90 Teža stroja ca. 6 t Lhsdpfx Asy R Ed Asf Ajl Prodaja s funkcionalnim preizkusom Po želji nova geometrija mize za doplačilo B-os brezstopenjska Premer brusnih kolutov levo in desno 400 mm Naprava za notranje brušenje Konjiček z fino nastavitvijo Sinusno ravnilo pri WSS Kel-Set Pasivno vzdolžno pozicioniranje Movomatic TMP91

Stanje: rabljeno, Leto izdelave: 1997, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Teža stroja pribl. 6 t Prodaja poteka s funkcijskim preizkusom Po želji z novo geometrijo mize za doplačilo C-os za poligonsko brušenje B-os z ročnim vrtenjem Lodpfjy R Ed Nex Af Aohl Premer brusnega kola levo 400 mm Premer brusnega kola desno na zahtevo Naprava za notranje brušenje Konjiček z fino nastavitvijo

Stanje: rabljeno, Leto izdelave: 1999, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina med konicama 175 mm Krmiljenje FANUC 18i-TA GENERALNO OBNOVLJENO Fotografija podobnega že dobavljenega stroja - Oprema brusnega kolesa LEVO 500 mm - Oprema brusnega kolesa DESNO 400 mm - Notranja brusilna enota 120 mm za jermensko gnane notranje brusilne vretena (standard) - CNC krmiljenje FANUC 18i-TA - Pripravljeno za kombinirano merilno krmiljenje Marposs (Minialsar, Positionar) z E5N - B-os - Kel-Set Lhedpey U N Hpsfx Af Asl - Hidravlični povrat pinole - Mikro nastavitev na konjičku - Glavna vretena z vrtljivo osnovo

Stanje: rabljeno, Premer brusilnega krožnika: 450 mm Dolžina brušenja: 1000 mm Višina med konicama: 225 mm Fotografije že dostavljenih strojev. Lhodozkvucepfx Af Ajl Mehanska obnova: - Celoten stroj je bil obnovljen po protokolu za meritve Kellenberger. - Nova kabina, ki je prijazna za vzdrževanje. - Novo barvanje. Električna obnova: - Nadzorni sistem FANUC z rešitvijo BLUE-SOLUTION. - Na novo sestavljen omarica za nadzor. - Nova tehnologija pogona. - Zamenjava vseh električnih kablov, tlačnih stikal Berus itd. - Nove absolutne steklene merilne letve v osi x in z. - Nov absolutni rotacijski dajalnik (pri osi B). Fotografije že dostavljenega stroja z drugimi možnostmi opremljanja. Varianta brusilne glave UR/RS: - Razporeditev brusilnih plošč za zunanje in diagonalno brušenje, ena za drugo! - Zato je premer vsake plošče 400 mm! - Zato je bistveno manjša nevarnost trčenja. - Enostavnejše programiranje. - Oprema brusilnih plošč: 400 x 63 x 127 mm. - Naprava za uporabo vretena z visoko frekvenco (HF). - Vreteno je na voljo kot dodatna možnost, za doplačilo. - Os B, ki jo nadzoruje CNC, za zunanje, ravno in notranje brušenje v enem vpenjalnem položaju. - Območje vrtenja: +10° / -270°. - Os C za poligonalno brušenje. - Spodnji del je fiksiran. - Motor brusilne glave: 10,0 kW. - Podpirač. - Merilni sistem Marposs za merjenje brusilnih plošč. - Longitudinalna pozicija Marposs.

Stanje: rabljeno, Leto izdelave: 2002, Premer brusilnega diska: 350 mm Dolžina brušenja: 1000 mm Višina med centri: 175 mm Stroj je v odličnem stanju. Vzdrževanje in geometrična nastavitev po protokolu Kellenberger. Stroj z diagonalno glavo: Nadzor: Heidenhain 1830M -T1 450x80x203,2 mm -T4 450x80x203,2 mm Lhodpezz S Awjfx Af Aol Moč pogona motorja brusilne glave: 9,2 kW -Os B z visoko ločljivostjo -Kel-Net, vmesnik Ethernet -hidravlični povrat konusa za podporno pripravo -pnevmatsko razbremenjevanje za podporno pripravo -standardna vretenčna glava za obdelovanec, MK 5 DIN 55026, velikost 5" -spodnji del fiksiran za standardno vretenčno glavo za obdelovanec -KELPOS, aktivna dolžinska pozicija Marposs, nameščen na brusilni glavi -GAP Marposs

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control Lodpfx Afst Ii Nbs Aohl - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: Lhedpfx Afeuxfupo Aol - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Delno obnovljen stroj z merilnim protokolom v skladu s tolerancami za nove stroje NOV sistem vodenja Eckelmann ENC z BEMA programsko opremo za brušenje Lhjdeyatx Sjpfx Af Ael Numerično krmiljena B-os Notranja brusilna naprava premer 80 mm Brusni kamen levo premer 400 mm Brusni kamen desno premer 300 mm Notranje brusilno vreteno HJN 828 Hidravlični konjiček Mikro nastavitev Merilni sistem KEL SET

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 1000 mm Center height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle head swiveling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported, including clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in Kellenberger overhauls/retrofits, we can not only deliver machines in as-new condition with warranty, but we also offer service for your equipment. Geometrically refurbished and newly painted according to Kellenberger test protocol. Completely new electrics with new infeed control system. Photos show a previously delivered machine of the same model, but with 1500 mm center distance and a universal grinding head instead of 500 mm wheel head for external cylindrical grinding only. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at additional cost: - Semi-automatic dressing - Dressing compensation - GAP control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table traverse and rapid movement. Powerful, non-swiveling grinding spindle stock for production external cylindrical grinding operations. Lsdpfx Afed Ih Egs Aehl Application areas: Machining of high-precision components for gear manufacturing, machine tool, and general mechanical engineering. Match grinding for the hydraulics industry. At this time, the machine does not meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety objective must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Lhsdpfx Afouwv H Hj Ajl Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000