Nordischer Maschinenbau Rud. Badeer Gmbh Ba 1800 nakup rabljenega (73.662)

Leto izdelave: 2013, stanje: kot nova (razstavni stroj), Technical description with the following main data: Load capacity 1000 kg static distributed load Net lift 895 mm Closed height 85 mm Overall height 980 mm Platform length 1450 mm Platform width 1000 mm Material Smooth plate steel Lift time approx. 15 sec. for full net lift Nwedpofm U Auefx Apyok Lowering time Depends on load Electrical connection 3 x 400 V/50 Hz + protective earth, incl. 16 A CEE plug and 3 m cable Motor 1.1 kW, 1,400 rpm Solenoid voltage 24 V DC Protection class IP 54 general, solenoid valve and switches IP 65 Power unit position Free-standing Control box Dead-man control incl. 2 m cable Total weight approx. 205 kg Standard version: The lift tables comply with EN 1570 E and are CE-marked. Steel parts are cleaned, primed with anti-rust primer and painted with two-component polyurethane paint. All lift tables are equipped as standard with safety perimeter shut-off bars made of aluminum and with maintenance props for repair and service. Our lift tables are designed for approx. 10 cycles/hour at full load over an 8-hour shift per day. For more intensive use, we offer special lift tables. Warranty: 1 year on parts under normal single-shift operation, excluding labor costs.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, XXL-Center RAS 75.06 - Splošni tehnični podatki v mm: Dolžina upogibanja: 6400 mm Maks. debelina pločevine (400N/mm2): 1,5 mm Maks. debelina pločevine (750N/mm2): 1,0 mm Maks. debelina pločevine (200N/mm2): 2,0 mm Območje pomika prijemal: 10 – 750 mm Prosti prostor pred čeljustmi do: 300 ° Izvlečne vstavne mize: da Prijemala: da Programiranje: avtomatsko preko Bendex Dimenzije stroja vključno z varnostno ograjo pribl.: 9400 x 3000 Teža: 12,5 ton - Podatki glede stroja: Nwsdpox Hf Tvjfx Apyek Pogonski motor; 400V, 50/60 Hz, 3-fazni Leto izdelave: 2010 Stanje: Popolnoma obnovljen - Slike so primeri -

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Stroj je bil odstranjen iz rednega obratovanja in shranjen. Poleg tega je bil uporabljen kot rezervna kapaciteta, zato je bil malo uporabljan. Stroj se prodaja skupaj z nekaj rezervnimi deli, kot sta motor in menjalnik. Nsdponcbtbjfx Apyjwk

Stanje: novo, Leto izdelave: 2024, Frame and Edge Press with Manual Hydraulic Press Units, single-sided, stationary > robust frame-welded construction > frame press unit with continuous left-hand support > 1 sliding carriage for width adjustment with positioning lock in 50 mm hole grid system, equipped with central locking drive bolt > 2 horizontally and infinitely adjustable manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke > 5 roller-mounted vertical pressure beams made from thick-walled profile tube, electro-galvanized, with manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke. Press units adjustable within a 50 mm hole grid. Counter support adjustable in 6 steps with anti-drop safety. Counter support and pressure plate, 140 mm long, 80 mm deep. > 1 hold-down device, electro-galvanized, for manual suspension, with screw-down pressure > Finish: grey white RAL 9002, pressure plate and counter support gentian blue RAL 5010. > External dimensions (W x H x D): 3340 x 2350 x 730 mm (long version: 3690 x 2350 x 730 mm) > optionally available with more or fewer vertical pressure beams (see accessories list) Nwsdpfx Apjyuxkeyok Usable size (W x H in mm) as frame press: 2700 x 1800 Usable size (W x H in mm) as edge press: 3000 x 1800 Price plus packaging: €92 net Special solutions available on request!

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, MiniBendCenter RAS 79.05 Fully Automatic Panel Bending Center for Small Parts - General Information: Directly from the manufacturer Manufacturer’s warranty Maintenance included Latest available software version - General technical data in mm: Blank length: 50–600 Blank width: 40–600 Max. sheet thickness (400 N/mm²), tool-dependent: 3.0 Max. upper beam stroke: 500 mm Min. flange height (reference value, tool-dependent): 5 x s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrical: approx. 2027 kg Weight of machine components: approx. 945 kg - Machine-related data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine configuration: Nwodpfxjx Hyhuj Apyek Bending Cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis plus separate drive for rotary axis - Double-sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic rotary drive for rotary axis - Tool gripper - 2-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell front and rear Mobile operator panel: - 18" Touch & More control system Intelligent loading robot Combined camera and scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction cup row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining quantity) Curved conveyor belt with 6 interfacing stations Finished parts discharge enclosure Complete tool set RAS CAM-Office software including SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" Nwsdpfx Apetwb U Asyek The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 9.000 mm, vrsta nastavitve višine: električni, hitrost brusilnega traku: 25 mm/s, skupna višina: 2.200 mm, skupna dolžina: 4.640 mm, skupna širina: 2.650 mm, skupna masa: 1.200 kg, dolžina brušenja: 2.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 4.640 mm, potrebna širina: 2.650 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinder M2S92-150 with two sanding belts for manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Not for use with aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Sanding unit with contact roller, manually shiftable from belt 1 to belt 2 - Electric table elevation - Flat machine table - Workpiece stop ruler on the machine table - Initial set of sanding belts - CE-compliant design - Operating manual + manufacturer's declaration according to Annex 2 The robust, welded steel frame construction provides exceptionally smooth machine operation. Both machine stands feature offsets that enable processing of longer workpieces. The three-roller belt guidance offers the operator the largest possible open work area, allowing comfortable handling especially with hand sanding blocks. Belt drive is provided by a three-phase motor and balanced drive roller. Each belt is individually adjustable via separate pneumatic tensioners, allowing optimal belt tensioning force per belt. The dust extraction system is dimensioned to effectively capture sanding dust and direct it to the extraction nozzle when attached to a suitable extraction unit. The sanding unit is mounted on play-free roller guides, ensuring low-fatigue operation. The machine table height is easily and quickly adjustable via the electric motor-driven table lift. The table lift guide components are maintenance-free. For loading, the table can be extended so that workpieces do not need to be inserted under the sanding belt. Main control elements are ergonomically positioned in the center of the machine for ease of operation. Machine color: Nodpfsv S Sr Rox Apyjwk RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in 'Light Grey' The standard configuration is supplied with two initial sanding belts (W x L) 150 x 9000 mm and a contact roller approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted at the table center beneath the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device features four vacuum suction pads for holding workpieces and includes: the mounting with rotary axis (with brake disc mounted on the rear). At the front of the rotary axis is the swiveling unit, lockable at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disc on the swivel head enables fine adjustment of the workpiece to the sanding belt. Rotation and swivel axes are pneumatically released via foot switch, with manual rotation of the axis. Maximum workpiece weight when used as a flat table with the insert frame = 80 daN; with handling device on the clamping plate = 25 daN or 120 Nm in relation to the rotary axis center.

Leto izdelave: 1972, stanje: nepreverjeno (rabljeno), številka stroja/vozila: SW3a DP. U. AP. 40923 , Guillotine Shear: A used guillotine shear (swing beam shear) by manufacturer Wieger. On this shear, the blade gap does not need to be adjusted when cutting different sheet thicknesses. Max. cutting capacity: 10 mm Model/Type: SW3a DP. U. AP. 40923 (with lamellar working clutch with brake, electro-pneumatically operated) Year of manufacture: 1972 Nsdod Eg Ngepfx Apyewk Condition: unchecked - used

Leto izdelave: 1993, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau Vulcanizing Press Year of manufacture: 1993 Machine no.: 2758 Nwedpfx Apjn Sm A Seyek Press force: 2,800 kN Heating plates: 500 x 500 mm Heating: electric Plate opening: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Including sliding table, vacuum pump, vacuum chamber, storage tank In good used condition. With CE marking.

Leto izdelave: 1990, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau vulcanizing press Year of manufacture: 1990 Machine no.: 2559 Pressing force: 2800 kN Heating plates: 500 x 500 mm Heating: electric Plate gap: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Nwedpfjn Sm Aysx Apyek Includes sliding table, vacuum pump, vacuum chamber, storage tank Good used condition. With CE marking.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, Professional Industrial Cutting Line (Longitudinal/Cross) – Grossmann – ONLY 100 Operating Hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from the quality manufacturer Grossmann Maschinenbau. Nwjdsylxmfjpfx Apyjk The unit has a total running time of no more than 100 operating hours. It is therefore in almost mint technical condition and shows hardly any signs of wear on its mechanical components. The system was originally designed as a chipboard mat cutting machine, but thanks to its robust construction and versatile PLC control, it can be flexibly used for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical Highlights & Features: Condition: Almost as new (max. 100 operating hours). Format: Maximum cutting length 2,500 mm x maximum working width 1,200 mm. Complete Line: Includes professional unwinder and rewinder for fully automatic material flow from roll to roll or roll to format. PLC Control: Professional programming with a choice between manual and automatic operation. Material Handling: Automatic gripper feed that positions the material precisely in the final position, plus integrated edge trim for perfectly cleaned edges. Operation: Intuitive control via display, foot switch, and visual/acoustic completion notification (signal light/horn). Precision: Integrated laser for exact material alignment. Safety: Full enclosure and modern safety monitoring. Versatility: This machine is a true all-rounder for anything that comes from the roll and needs to be cut to precise sheet sizes or strips. The sturdy frame, built with a high-quality aluminium profile system, ensures maximum torsional rigidity. Complete documentation, including operating logs, circuit diagrams, and technical drawings, is fully available. The machine can be inspected and tested under power by appointment. For detailed technical information or questions about your application, I am happy to assist you personally. Contact: Phone: 05427 9423 20

Leto izdelave: 1995, stanje: dober (rabljeno), Zanesljiva naprava za zapiranje pladnjev podjetja Dyno Industrier, izdelana na Norveškem. Primerna za meso, ribe, perutnino, pripravljene obroke, sir in druge živilske izdelke, ki zahtevajo vakuumsko pakiranje ali pakiranje v modificirani atmosferi (MAP). Tehnične specifikacije: Model: DYNO 320VG / 321VG Možnost vakuumskega pakiranja + MAP (plinjenje) Popolnoma delujoča in trenutno v proizvodnji Polavtomatsko delovanje Nameščen kalup za 4 pladnje Priložen sistem za navijanje folije Priložen originalni priročnik za uporabo Krmilna plošča Pilz Dobro vzdrževana in pripravljena za takojšnjo uporabo Idealna za: Proizvajalce mesnih izdelkov Podjetja, ki predelujejo morske sadeže Proizvajalce delikates Nodpfxozkwd Ss Apyowk Proizvajalce pripravljenih obrokov Mala in srednje velika podjetja za proizvodnjo živil Stroj si lahko ogledate v delovanju in ga demonstriramo resnim kupcem. Na voljo je več kalupov.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, dobro ohranjeno. Kapaciteta: do 3000 izdelkov/uro Dimenzije izdelka: dolžina: 160 - 400 mm, višina: 50 - 150 mm Moč: 5 kW Zrak: 6,0 bar Pripravljeno za odpremo Njdpfx Apeylurkoyjwk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Na prodaj je izjemno učinkovit, popolnoma usklajen kombinirani reciklirni sistem vodilnega nemškega proizvajalca WEIMA, ki ga sestavljajo enovaljni drobilnik WL 600 in hidravlična briketirna stiskalnica C 170. Obe napravi sta izdelani v Nemčiji in sta delovali izjemno zanesljivo. To napravo smo uporabljali le kratek čas, ker načrtovani projekt, pri katerem smo želeli uporabiti odmrlo lesno biomaso iz naravnega gozda, ni uspel. To pa ni imelo nič skupnega s funkcionalnostjo naprave. Napravo bomo poslali nazaj v Nemčijo, ker v Čilu zanjo ni trga. Nodpfx Aozgq Trspyjwk Danes bomo dodali še več slik zapakirane naprave, ki bo naslednji teden odposlana.

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 81100543, Stroj je pripravljen za delo, uporabljal se je le 3 leta od nakupa. Naprava je bila nameščena v proizvodni liniji za pripravo juh v embalažah od 220 ml do 360 ml. Proizvodna serija: SC-3000-XXX Širina skeniranja: 320 mm Optična ločljivost: 1 piksel = 0,16 mm Nazivna napetost: L1/N/PE 230 V AC Nazivna frekvenca: 50 Hz (+/- 2%) 1,6 kVA Nedpfx Aszrh D Sspyjwk Priključna moč: 16 A Stopnja zaščite: IP65 Tip žarometa: MXR-160HP/20 Območje delovne temperature: 5 °C - 40 °C Teža stroja: 420 kg Dolžina: 1750 mm Globina: 720 mm Višina: 2290 mm Izjava o skladnosti EU Možnost zagon stroja na licu mesta.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travels: X-axis 600 mm Y-axis (swivel position) 600 (975) mm Z-axis 500 mm Control System: Siemens 840D control, side-mounted Feedrate/Rapid traverse: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Mean acceleration: X, Y, Z: 2.5 m/s² Measuring System: Direct position measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40%ED) Power: 2 x 38 kW (S6/40%ED) HSK–A 100, horizontal side-by-side arrangement Nwedpfx Apezhlfreyek Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Work Area: Swing carrier with ground gear, max. payload 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. payload 700 kg, speed 25 rpm Partition between machining and loading area Tool Magazine: 2 x 50 tools HSK-A 100 chain magazine Tool change time (chip-to-chip): 4.48 sec. Max. tool diameter: 100 mm 250 mm with free adjacent slot Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Centralized lubrication Minimal quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant filtration with compact belt filter Hydraulic unit Maintenance unit Water chiller Fully enclosed, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other: Very good condition Main-time parallel setup Available from December 2023/January 2024

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Siemens, hitrost vretena (min.): 10.000 obr/min, največja hitrost vretena: 10.000 obr/min, razdalja med vreteni: 600 mm, število vreten: 2, število mest v zalogovniku orodij: 80, razmak osovin: 600 mm, Oprema: transportni trak za ostružke, Schwäbische Werkzeugmaschine GmbH Dvojvretenski stroj BA 600-2 Letnik izdelave Nwsdozdq Scspfx Apyok Razmak med vreteni 600 mm Orodni nosilec 2 x HSK 100, 10.000 obratov/min Stroj je še vedno v proizvodnji in si ga je mogoče ogledati ob delovanju. Potrebna so razna popravila. 8-kratna vpenjalna hidravlika na vsako menjalno mostno ploščo.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1731 067, Oprema: CE označba, računalnik na krovu, Predmet prodaje je tračna lepilka podjetja Herbert Meyer GmbH. Delovna širina: 1800 mm, lahko dela v neprekinjenem načinu. Lepilka iz leta 2013 v dobrem tehničnem stanju – pripravljena za delo. Več informacij je na voljo po elektronski pošti. Moč: 32,2 kW. Napajalna napetost: 400 V. Napajalni tok: 47,5 A. Priklop komprimiranega zraka: 6 barov. Lepilka z izjemno učinkovito grelno cono in natančnim pritiskom valjev za enakomeren pritisk. Zagotovljen prihranek energije in čisto delo. Nsdpozfi Hbofx Apyjwk

Leto izdelave: 2022, obratovalne ure: 1.861 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprodaj je obdelovalni stroj za platišča Rösler, tip FBA 24/2 Turbo. Stroj je bil posebej zasnovan za potrebe profesionalne obdelave platišč in omogoča odlične rezultate v kratkem času obdelave zahvaljujoč dvema stransko nameščenima motorjem za uravnoteženje. S pomočjo brezstopenjske regulacije hitrosti in nastavljivega položaja motorjev je mogoče stroj prilagoditi različnim obdelavam. Kompaktni obdelovalni stroj za platišča je idealen za predhodno, fino brušenje in poliranje serijskih in posebnih platišč do 24 palcev. Zahvaljujoč enostavnemu upravljanju in hitri zamenjavi brusilnih teles je mogoče platišča v nekaj urah reproducibilno spolirati do visokega sijaja – za vrhunsko optiko visokega sijaja v plemenitem kovinskem videzu, tako pri rabljenih kot pri novih platiščih. Pnevmatični sistem za izmet omogoča enostavno in hitro nalaganje in razkladanje platišč. Poleg platišč je mogoče obdelovati tudi druge komponente. Delovni posodi je opremljen s prilagodljivo vpenjalno napravo za različne tipe platišč in z visokokakovostno oblogo, ki ščiti pred obrabo, izdelano iz poliuretanskega elastomera (Rösler HD 90). Specialna rebrasta, s toplotno obdelavo odstranjena napetost, varjena konstrukcija zagotavlja dolgo življenjsko dobo in nemoten, robusten tek tudi pri neprekinjenem delovanju. Področja uporabe: Visoko sijoče brušenje platišč vseh vrst (avtomobilskih in motocikelskih) do 24 palcev Aluminijasta, lita in kovana platišča Poliranje drugih motornih komponent Obnova komponent, npr. iz področja starodobnih vozil ali letalstva, obrambe itd. Tehnični podatki: Proizvajalec: Rösler Oberflächentechnik GmbH Tip: FBA 24/2 Turbo, obdelovalni stroj za platišča Delovni posodi: notranji premer 700 mm, globina posode 550 mm Obloga, ki ščiti pred obrabo: visokokakovosten poliuretanski elastomer, Rösler HD 90 Izvedba: dolgotrajna, specialna rebrasta varjena konstrukcija, s toplotno obdelavo odstranjena napetost Motorji: 2 specialna motorja za uravnoteženje, zasnovana za dolgotrajno obremenitev Hitrost: 3.000 vrt/min, brezstopenjsko regulirana s frekvenčnim pretvornikom Samodejna sprememba smeri vrtenja V krmilniku Siemens SPS je mogoče shraniti različne programe in tako doseči reproducibilne rezultate. Samodejni potek programa zagotavlja nizko stopnjo napak pri upravljavcu. Nwjdpfxjzw A Rws Apysk Imamo skupaj več kot 80 strojev za vibracijsko brušenje. Kontaktirajte nas za vsa vprašanja v zvezi z vibracijskim brušenjem.

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: E1053A0497, skupna masa: 850 kg, Na prodaj je TRUMPF TruDisk 4002 (4C) disk laserski sistem / laserski vir, vključno z ločeno hladilno enoto KLH RW 20/0 SK. Tehnični podatki laserja: * Proizvajalec: TRUMPF Laser GmbH + Co. KG * Tip: TruDisk 4002 (4C) * Letnik izdelave: 01/2011 * Laserska moč: 4.000 W * Številka opreme: E1053A0497 * Napetost: 380 V (-10 %) do 460 V (+10 %), 3 AC + PE * Frekvenca: 50–60 Hz * Priključna moč: 23 kW / 25 kVA * Nazivni tok: 34 A pri 400 V * Stopnja zaščite: IP54 * Teža: pribl. 850 kg Njdpszvqfyefx Apyewk Hladilna enota: * Proizvajalec: KLH Kältetechnik GmbH * Tip: RW 20/0 SK * Letnik izdelave: 2017 * Številka dela: E123223000AA * Serijska številka: 17KLH00670 * Napetost: 400/460 V * Frekvenca: 50/60 Hz * Hladilno sredstvo: R134a * Količina hladilnega sredstva: 3,7 kg TruDisk 4002 se prodaja skupaj s prikazano hladilno enoto KLH. Ogled je možen po dogovoru. Dodatne tehnične informacije in slike so na voljo na zahtevo.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. Nwjdpfx Apeyxccrsyjk The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Ponujamo pocinkano tlačilno posodo – 5000 l. Proizvajalec: OKS Otto Klein GmbH Največji delovni tlak: 11 bar Leto proizvodnje: 2019. Dimenzije: Premer: 1400 mm Višina: 3570 mm Masa: 1050 kg Tlačilna posoda z dokumentacijo. Tlačilna posoda, vključno z armaturami – varnostni ventil, manometer + prirobnice. Nwsdpfx Apezt Icqeyek Tlačilna posoda, rezervoar za zrak, tlačna posoda.

Stanje: rabljeno, Leto izdelave: 2014, Oprema: - Mašina za brušenje sa rotirajućim trakama sa četkama - Motorno podešavanje visine brusnog agregata, opseg podešavanja cca 0 - 80 mm, preko upravljanja mašinom slobodno programabilno. - Strana upravljanja u smeru prolaza, desno - Set rotacionih četki sastoji se od: 174 segmentnih četki, dužine 1.300mm. Njdpjxrb Rfefx Apyowk Segmenti se lako menjaju, ubacuju se sa strane u trakastu četku. - Sa vakuum transportnom trakom - Sa valjkom za čišćenje uvodnog pojasa Tehnički podaci: - Radna širina: 1300 mm - Maks. debljina obratka cca 80mm (u zavisnosti od zrna brusnog materijala) - Radna visina: 850 - 900 mm - Godina proizvodnje: 2014 - Podesiva brzina uvlačenja, 3m/min-10m/min - Dužina mašine: 3860 mm - Širina mašine: 2400 mm - Visina mašine: 2000 mm - Boja prema RAL 7035, svetlosiva sa kontrastnom zelenom bojom - Napon: 400V/50HZ - el. priključak 16kW/ 36A - Težina mašine: cca 2600 kg

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400-223, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 200 mm, hitrost pomika os X: 20.000 m/min, hitrost podajanja osi Y: 20.000 m/min, hitrost podajanja os Z: 20.000 m/min, montažni premer: 40 mm, dolžina mize: 2.500 mm, širina mize: 1.250 mm, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 30.000 obr/min, hitro pomikanje X-os: 20.000 m/min, hitri pomik os Y: 20.000 m/min, hitri pomik na osi Z: 20.000 m/min, premer orodja: 20 mm, število mest v zalogovniku orodij: 30, Ponujamo rabljeni portalni rezkalni stroj MB-Portatec GmbH basic II.S, letnik 2011. Proizvajalec: MB - PORTATEC GmbH Tip: basic II.S Serijska številka: 400-223 Leto izdelave: 2011 -Področje uporabe: Obdelava aluminijastih in plastičnih plošč do 2500 mm. Nsdoy U R Syopfx Apyswk -Dodatna možnost: vertikalni vpenjalni sistem. -Pribor: vakuumska črpalka in odsesovalna naprava s predfiltrom. -MMS sistem -Programabilna vakuumska polja Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: Nwsdow E H E Rspfx Apyok - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW