Lamina System Semi Automatic Laminator Sa1416 nakup rabljenega (50.428)

Leto izdelave: 2004, stanje: rabljeno, Semi-automatische schroefdopsluitmachine Merk: Zalkin Model: TM-3 Hfodpfoiby Hmjx Alfjg Bouwjaar: 2004 Momenteel uitgerust voor maximaal 90 mm doppen Hand-/voetbediend Werkend (in bedrijf zijnde) conditie

Stanje: zelo dobro (rabljeno), Fabrikant: Lubeca Type: halfautomatische 1-kops bliksluitmachine Model: LW210 Bereik: diameter 99 – 235 mm hoogte 15 – 320 mm Capaciteit: tot 300 blikken per uur Frame: staal, gelakt Afmetingen (L x B x H): 700 x 800 x 2.000 mm Stroomvoorziening: 380 Volt – 50 Hz – 1,1 kW Besturing: aan/uit-schakelaar met overbelastingsbeveiliging beveiligde pneumatische tweehandenbediening Gereedschap: 1 set sluitgereedschap voor ronde blikken, naar keuze klant Hodpfx Asibc Eaelfofg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Avtomatska Wagnerjeva linija za prašno lakiranje, letnik 2012 - Wagner SuperCube kabina - Wagner SuperCenter dovod prahu - PBS filter in ciklon 18.000 m³ Hfodpfxsy Icfxo Alfeg - STS CO2 gasilni sistem - Mesto za predpripravo in naknadno lakiranje z dvižnimi delovnimi ploščadmi - Dimenzija prehoda V: 2500mm; Š: 1000mm - 12 avtomatskih pištol + ročni sistemi za nanašanje Demontaža po dogovoru v našem obratu v Bad Laer! Cena po dogovoru

Leto izdelave: 2025, stanje: novo, PÓŁAUTOMATYCZNA MASZYNA DO KLEJENIA Hsdpfx Alegnlv Dofsfg MODEL: MAGRAFKA-100 ROK: 2025

Leto izdelave: 2019, stanje: novo, POLOAVTOMATSKI STROJ ZA NAMEŠČANJE KNJIŽNIH PLATNIC LJ308A Hedpfjfdzwyjx Alfofg -nova naprava

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 30.000 mm, skupna višina: 4.300 mm, skupna širina: 6.500 mm, teža obdelovanca (maks.): 100 kg, temperatura: 220 °C, ogrevalna zmogljivost: 80 kW (108,77 KM), višina obdelovanca (maks.): 1.200 mm, dolžina obdelovanca (maks.): 2.500 mm, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 800 mm, The continuous processing system consists of the following components: - Chemical pre-treatment via spraying - Dryer - Powder coating system Hfodpfx Ajum Uflelfeg - Powder curing oven - Conveyor technology (indexing mode) - Electrical control system

Stanje: generalkompletno obnovljen (rabljeno), Division into 30 parts Weight range: 32–70 g/piece Adjustable rounding height Includes 3 plastic rounding plates Complete gearbox in oil bath Motor: 400V – 3 Ph – 50 Hz Standard motor protection Head opens for cleaning Condition: very good (after complete overhaul) Dough quantity per tray (grams): 960–2100 Hsdpett Am Ujfx Alfsfg Dimensions (L x W x H, mm): 580 x 580 x 1350 Power (kW): approx. 0.74 Net weight (kg): 330

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 60 h, moč: 0,5 kW (0,68 KM), vhodna napetost: 400 V, Oprema: CE označba, dokumentacija / priročnik, Vitap Eclipse polavtomatski robni lepilni stroj za obdelavo kontur 2014, največ 60 delovnih ur Hedpfx Aley Rmyfjfofg

Stanje: novo, Leto izdelave: 2025, moč: 11 kW (14,96 KM), največja višina reza: 1.500 mm, največja širina rezanja: 2.500 mm, trajanje garancije: 12 meseci, STANDARD FEATURES - Independently movable dual hydraulic vice - Linear rapid descent system - Variable band speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table drive system - Safety switches - Chip conveyor - Motorized chip brush Hfedpfx Aljvvcpzefjg - 1 bandsaw blade included - 24 months mechanical & 12 months electrical warranty - Country of origin: Turkey TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM): 1500 CAPACITY SQUARE (MM): 1500x1500 CAPACITY RECTANGULAR (MM): 1500x2500 BLADE SIZE (MM): 80x1.6x15650 BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 11 HYDRAULIC MOTOR (KW): 2.2 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 600 MACHINE DIMENSIONS (MM): 7500x2150x3440 WEIGHT (KG): 21000 We manufacture both straight and mitre cutting models with capacities ranging from 220mm up to 3000mm. For more information, please contact us.

Stanje: novo, Leto izdelave: 2026, premer žaginega lista: 400 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 110 mm, največja hitrost vrtenja: 60 obr/min, trajanje garancije: 12 meseci, hitrost žaginega lista: 60 obr/min, Obseg rezanja kvadratnega jekla pri 45°: 110 mm, Območje rezanja kvadratnega jekla pri 90°: 120 mm, premer rezanja: 120 mm, Oprema: dokumentacija / priročnik, Semi-Automatic Double-Head Vertical Pipe and Profile Cutting Saw Machine Product Overview The semi-automatic double-head vertical pipe and profile cutting saw machine is designed for serial, precise, and repeatable cutting of round tubes as well as square and rectangular profiles in industrial production lines. The right saw head is fixed, while the left saw head is servo motor-driven and automatically movable. Thanks to its gearbox system suitable for heavy-duty operations, cast iron table structure, and precise cutting mechanism, it ensures stable cutting quality and a long machine service life. Key Features - Semi-automatic double-head vertical pipe and profile cutting saw machine - Right saw head fixed; left saw head automatically movable, controlled by servo motor - Left head system traveling on needle-type linear guides - Helical gear reducer made of hardened and ground helical gears, suitable for heavy loads - Vertical movement of saw heads: - Ball screw - Servo motor controlled - Long-life, high-precision needle-type linear guide system - Cutting units mounted on fully cast iron tables - Variable speed cutting: - Slow at entry - Fast in the middle section - Slow again at exit - This reduces overall cutting time by approximately 30% and extends saw blade life - Saw speed adjustable between 20 – 60 rpm (inverter controlled) - PLC controlled colored touch screen Cutting Capacity (Pipe & Profile) Maximum Saw Blade Diameter: 400 mm Cutting Angles and Capacities Cut Angle Round Pipe (max.) Square Profile (max.) Rectangular Profile (max.) 90° Ø 120 mm 120 × 120 mm 160 × 90 mm ±45° Ø 120 mm 110 × 110 mm 140 × 90 mm +60° Ø 110 mm 90 × 90 mm 90 × 90 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 9.5 kW - Current: 35 A - Saw Motor: 3 kW - Coolant Pump: 0.06 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 20 – 60 rpm (Inverter controlled) - Angle Adjustment: 90° / ±45° / +60° Saw Blade Specifications - Saw Blade Diameter: 400 mm - Saw Blade Bore Diameter: 40 / 50 mm - Pin Holes: 4 – 15 – 80 Hfodpfjyg H R Iox Alfsg Coating Options: - TiN: For medium-hard steels - TiCN: For high-hardness steels - TiAlN: For stainless steels Machine Dimensions & Weight - Width: 4200 mm - Length: 1200 mm - Height: 1800 mm - Net Weight: 2520 kg - Gross Weight: 2540 kg

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), največja višina reza: 1.100 mm, največja širina rezanja: 1.600 mm, trajanje garancije: 12 meseci, STANDARD FEATURES - Independent dual hydraulic vice - Linear rapid descent system - Variable band speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table feed system - Safety switches - Chip conveyor - Motorized chip brush - 1 band saw blade included - 24-month mechanical and 12-month electrical warranty - Country of origin: Turkey Hjdpfx Asvvcp Uslfsfg TECHNICAL SPECIFICATIONS CUTTING CAPACITY ROUND (MM): 1100 CUTTING CAPACITY SQUARE (MM): 1100x1100 CUTTING CAPACITY RECTANGULAR (MM): 1100x1600 BLADE DIMENSIONS (MM): 67x1.6x11630 BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 7.5 HYDRAULIC MOTOR (KW): 1.5 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 535 MACHINE DIMENSIONS (MM): 5390x1760x2875 WEIGHT (KG): 8000 We manufacture both straight and mitre cutting models from 220mm up to 3000mm. For more information, please contact us.

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), največja višina reza: 700 mm, največja širina rezanja: 1.100 mm, hitrost rezanja: 80 mm/min, trajanje garancije: 24 meseci, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL MAXIMUM ROUND DIAMETER: 700 MM MAXIMUM RECTANGULAR DIMENSIONS: 700 X 1100 MM MAXIMUM SQUARE DIMENSIONS: 700 X 700 MM STANDARD MOTOR-DRIVEN TABLE COLUMN TYPE SEMI-AUTOMATIC VARIABLE SPEED CONTROL Hfjdpovzh Duefx Alfjg PRECISION HEAD DESCENT SYSTEM PLEASE REQUEST AN OFFER FOR FURTHER DETAILS.

Stanje: novo, Leto izdelave: 2026, moč: 2,2 kW (2,99 KM), največja višina reza: 300 mm, največja širina rezanja: 560 mm, vrsta upravljanja: ročni, vrtilni razpon: 60 °, vrsta aktuacije: hidravlični, največja hitrost vrtenja: 100 obr/min, vrtljajska hitrost (min.): 80 obr/min, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, CRONOSS 300X560 YDG Pivot-Type, Semi-Automatic Band Saw with Rotary Head (Swivel Base) The CRONOSS 300X560 YDG is a robust, pivot-type, semi-automatic band saw designed for medium-scale metal cutting operations. Featuring an angular cutting capability with a rotary head between 0° and 60°, it delivers precise and repeatable results. It provides a reliable cutting solution for steel construction workshops, machine manufacturers, and metalworking facilities. Standard Features - Hydraulic vise - Variable speed control (inverter) - Safety switches - Hydromechanical blade tensioning system - Adjustable miter cutting from 0° to 60° (rotary head) - Angle gauge - Adjustable head downfeed system - 1 band saw blade included - 2 material support stands included - Country of origin: Turkey - Model options available for diameters between 220 mm and 3000 mm Technical Specifications – 300 YDG 90° Capacity - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 560 mm 60° Capacity - Round: 200 mm - Square: 180 x 180 mm - Rectangle: 180 x 245 mm 45° Capacity - Round: 300 mm - Square: 235 x 235 mm - Rectangle: 235 x 360 mm Motor & Technical Details - Main Motor: 2.2 kW - Hydraulic Motor: 0.37 kW - Coolant Motor: 0.09 kW - Band Size: 34 x 1.1 x 4100 mm - Material Feed Height: 809 mm - Maximum Vise Opening: 600 mm - Minimum Vise Clamp: 0 mm Hfsdoyntzpepfx Alfjg - Stand Width: 615 mm - Dimensions (HxWxL): 1268 x 2035 x 2862 mm - Weight: 900 kg Production & Supply The CRONOSS 300X560 YDG is manufactured in Turkey. Different capacity and configuration options can be provided upon request. For detailed technical information and a price quote, please contact us. Keywords: Band Saw Machine, Semi Automatic Band Saw, Pivot Type Band Saw, Rotary Head Band Saw, Metal Cutting Machine, Steel Cutting Band Saw, Industrial Band Saw, Hydraulic Band Saw, Angle Cutting Band Saw, 300 mm Band Saw, 300x560 Band Saw, Workshop Band Saw Machine, Structural Steel Cutting Machine

Stanje: rabljeno, - Marke: GECOMA - Modell: SMART 11 - Typ: Brotschneidemaschine - Ausführung: halbautomatisch - Seriennummer: 13 SM 411 026 - Baujahr: 03/2013 - Schnittbreite: 42 cm - Schnittstärke: 11 mm - Nutzbarer Durchlass: 42 cm - Durchlasshöhe: 15 cm - Schnitttiefe: 32 cm - Maximale Leistung: 200 Brote/h - Stromversorgung: 400 V Drehstrom - Leistung: 0,55 kW - Mit Sockel - Bedienung: Rechts- oder Linkshänder möglich - Absackvorrichtung: ergonomische Palette - Krümelschublade: integriert Abschrägbare Beladungstisch für eine vollfrontal orientierte Bedienung. • Unterstütztes Antriebssystem "Softlift". Eine Querstrebe ersetzt den klassischen seitlichen Hebel: • Vorteile: Geringerer Kraftaufwand. Bedienung mit der rechten oder linken Hand oder beidhändig. Hfsdpfx Aey N Sp Aelfeg • Platzsparendes Design für perfekte Integration in Möbel. • Mechanische Belastungsausgleich. • Absackpalette in ergonomischer Höhe. • Integrierte Krümelschublade. • Verschiedene Sockelvarianten möglich.

Stanje: dober (rabljeno), Cyklos GPM 450SA Polavtomatski utorjalnik Stroj v zelo dobrem stanju, pripravljen za produkcijo. Opis: Delovna širina do 450 mm. Programator z možnostjo shranjevanja do 15 pozicij utorjanja/perforacije. List se vstavi ročno, nato se samodejno odvzame. Enostavna nadzorna plošča s shrambo programov. Robustna kovinska konstrukcija. Utorjanje ali perforacija po celotni širini lista (utorjalno orodje vključeno). Možno je utorjanje digitalnih tiskovin in laminiranih listov. Hfedpfx Aeyy Ri Aelfjg 4 standardne širine utorjanja. Velika delovna miza.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) Hfodexdr Rtspfx Alfjg - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Hfjdopa Nxdjpfx Alfjg Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor Hfsdoidun Dopfx Alfjg - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose Hjdsgwt Rrepfx Alfofg • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! Hfodpfx Ajgwt Rnolfjg You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose Hjdpfx Alegwt Ryjfsfg • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! Hsdpfx Aogcbwgjlfofg You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) Hsdjgwt R Dopfx Alfjfg • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Technical Specification: • Chamber volume: 990 liters • Power supply: 230V ~ / 50Hz • Nominal operating pressure: up to 10 bar • Cleaning performance: up to 15 m²/h • Cleaning grade: SA-2.0 (deep and extensive corrosion) • Air consumption: 500 l/min (with 4.0 mm nozzle) • Maximum air flow: up to 1,500 l/min • Supported nozzle diameters: from 4 to 10 mm • Grinding valve: Vacuum BRAGO • Gun: Vacuum CTR • Working area dimensions: 1,600 x 870 x 730 mm • Viewing glass dimensions: 305 x 610 mm • Work table load capacity: up to 250 kg • Lighting: LED, adjustable within a range of +/- 90 degrees (two segments) • Surface protection: powder coating • Operating temperature: 10 to +50 degrees Celsius • Inspection valve: Yes • The picture shows an example configuration of the SCI-800-10 SA The offer includes: • Land Reko SCI-800-10 SA Semi-automatic Chamber Cleaner • Boron carbide nozzles: 8 pieces, selectable between 4 mm and 10 mm • Pneumatic connections • Working pressure control system for sprinkler sections • Hand-operated roller conveyor 1.5 lm x 2 • Automatic sprinkler and grinding valve x 8 • Workpiece blowing system after processing • CE declaration of conformity • User manual in German • 24-month warranty for consumers Hfsdpfx Aloft Sq Hefsg • 24-month warranty for businesses • Free delivery • The equipment is also available via leasing or financing • Device available on order. Delivery time is 8 weeks from order placement.

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system Hodpfx Alopa Nxaofofg - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH