Kraussmaffei Km 130-750Cx 61010843 nakup rabljenega (13.599)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Nedpfx Aeymn Nfjh Uswg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 504212, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, razmak između stupova: 900 mm, tlak vbrizgavanja: 1.742 letvica, vgradna višina: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Max. mould opening distance: 1,170 mm Min. mould installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force reverse: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3 phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged by agreement at an additional cost. Nwodow Dy Rwjpfx Ah Ujg

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22 Njdpeud H Dmjfx Ah Uswg  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) Nwedpfxew U N Ixs Ah Ueg CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2006, Brizgalni stroj Krauss Maffei KM 800-4300 MX, letnik 2006 Nedpfx Aow Hwr Doh Uswg Stroj je opremljen kot sledi: - 5 hidravličnih kaskadnih krmiljenj - Brizgalna enota s cilindrom 90 - Krmiljenje MT5 - Prijemalo Krauss Maffei - 2 transportna trakova

Stanje: rabljeno, Leto izdelave: 2004, Krauss Maffei KM125-390 C2 (letnik 2004) Zapiralna sila: 125 kN Njdjw D Rmiepfx Ah Ujwg Delovne ure: cca 63.000 h Stroj si je možno ogledati kadarkoli

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Nwedpfjw Hwthsx Ah Usg

Stanje: rabljeno, Leto izdelave: 1999, Brizgalni stroj Krauss-Maffei 800 /5700MC, letnik 1999 naprodaj. Tehnični podatki na zahtevo. Njdpjyg Hbgofx Ah Uewg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, tlak vbrizgavanja: 1.795 letvica, odmični hod: 2.100 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Movable platen opening force: 89 kN Movable platen closing force: 92 kN Nwsdpoyv Acmsfx Ah Usg Mounting platen (H x V): 1,600 x 1,550 mm Clear space (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Max. mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Rated output of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Operating hours: 50,000 h EQUIPMENT Swing-out elements 1 x air valve Tie-bar pulling device 3 x hydraulic core puller at movable platen (BWAP) 2 x hydraulic core puller at fixed platen (FWAP) 20 x hot runner control zones Robot interface according to Euromap 67

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 82.540 h, Machine de moulage par injection Krauss Maffei Modèle : KM 800-5700 MC Année : 1999 Vis : 105 mm 4 tiroirs noyau 1 électrovanne d’air AS Nedpfeyup D Hjx Ah Uowg Env. 82 540 heures de fonctionnement Hauteur d’installation : min. 600 mm, max. 1 100 mm Course d’ouverture : 1 400 mm Dimensions des plateaux : 1 300 mm x 1 300 mm Espacement entre colonnes, horizontal : 1 120 mm, vertical : 1 000 mm Bague de centrage : 250 mm 8 circuits d’eau chacun Convoyeur Carénage Système de manipulation Contrôlée et raccords de pompe étanchéifiés par KM en 2025 La machine est fonctionnelle et toujours en production Localisation : Thuringe _____ Nos conditions générales s’appliquent ; par ailleurs, le vendeur ne répond pas des erreurs de saisie ou de transmission des données. Les informations et photos ont été fournies par le propriétaire et autorisées à la publication. L’état visuel des objets proposés correspond à leur âge et aux images présentées. La technique et l’usure des objets proposés sont conformes à leur âge. Machines d’occasion vendues exclusivement à des professionnels et sans garantie.

Stanje: pripravljen za uporabo (rabljen), Rabljeni stroj Brizgalni stroj Proizvajalec: Krauss Maffei KM 80 C1 Letnik: 2000 Na zalogi je le še 1 stroj Ni dobavnega roka, takoj dobavljivo Ogled možen po predhodnem dogovoru Stroj ni več priključen na elektriko / noben priključek za hladilno vodo Stroj je strokovno uskladiščen Tehnični podatki: Zapiralna sila (kN): 800 kN Pritrdilna plošča (mm): 610×610 Razdalja med stebri (mm): Vgradna višina (mm): 250 Odprtina med ploščami (mm): 750 Krmiljenje: MC4 Zaslon v nemškem jeziku (ni mogoče spremeniti v druge jezike) Brizgalna enota Premer polža (mm): 45 Brizgalni tlak (bar): 1878 Nsdpju Ti Srjfx Ah Ujwg Prostornina hoda (cm³): 275 Moč pogona črpalke (kW): 18,5 Grejna moč (kW): 13 Polnjenje olja (l): 270 Dimenzije (m): 4,3 x 1,4 x 2,1 Skupna masa: 3,2 t Dodatne fotografije na zahtevo.

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Njdpfeuiykdsx Ah Ujwg

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je dvokomponentni brizgalni stroj Krauss Maffei Multinject. Zapiralna sila: 3500kN, dimenzije plošč X/Y: 1280mm/1190mm, drugi agregat: 390CZ. Dimenzije stroja X/Y/Z: pribl. 6300mm/2000mm/3100mm, teža: pribl. 17000kg, krmiljenje: Krauss Maffei MC4, obratovalne ure: 78424h. Krmiljenje je v okvari. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nwedpsxx Uf Ajfx Ah Usg

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Two Krauss Maffei injection molding machines are available: Nwjdpow Emybofx Ah Ujg 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30 mm, L/D ratio: 23, injection pressure: 2500 bar, shot volume: 85 cm³, machine dimensions (L/W/H): approx. 3200 mm / 1350 mm / 1800 mm, weight: approx. 2500 kg, control system: MC4, operating hours: approx. 86,000 h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45 mm, L/D ratio: 20, injection pressure: 1878 bar, shot volume: 217 cm³, machine dimensions (L/W/H): approx. 4500 mm / 1550 mm / 2200 mm, weight: approx. 5500 kg, control system: MC4, operating hours: approx. 82,000 h. Documentation is available. Inspection on site is possible.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Clamping force: 1,500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2,336 bar. Machine dimensions X/Y/Z: approx. 4,700 mm / 1,550 mm / 2,200 mm, weight: approx. 7,000 kg, control system: MC4. Including Sepro handling robot. Documentation available. On-site inspection possible. Nwodew Hthzjpfx Ah Ujg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Nwsdpfx Aoub S R Hjh Ujg Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production Njdetunccjpfx Ah Ujwg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Brizgalni stroj Krauss Maffei KM 800-5000 MC Leto proizvodnje: 2001 Oprema: robot Tehnični podatki: Zapiralna sila: 8 000 kN Največja sila odpiranja orodja: 356 kN Sila pomika gibljive plošče (odpiranje): 98 kN Sila gibljive plošče (zapiranje): 92 kN Velikost plošč (š × v): 1 610 × 1 530 mm Razmak stebrov (š × v): 1 120 × 1 000 mm Hod odpiranja orodja: 1 400 mm Minimalna višina orodja: 600 mm Maksimalno odprtje: 2 000 mm Hod hidravličnega izmetalca: 250 mm Premer polža: 90 mm Razmerje L/D: 23 Tlak vbrizgavanja: 1 742 bar Prostornina vbrizga: 2 863 cm³ Nsdox Tfyiopfx Ah Uewg Masa vbrizga (PS): 2 605 g Splošni podatki o stroju Dimenzije (d × š × v): 10 500 × 2 860 × 2 890 mm Teža: 43 000 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 • Year of manufacture: 1999 Technical Data Clamping Unit • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Moving platen force (opening): 124 kN • Moving platen force (closing): 102 kN • Dimensions of mounting platens (W x H): 1270 mm x 1200 mm • Tie bar spacing (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Maximum daylight: 1400 mm Nsdpfewqd Aqex Ah Uswg • Ejector force (forward / backward): 95 / 48 kN Injection Unit • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Maximum plasticising rate: 108 g/s • Nozzle pressure: 173 kN Electrical and Hydraulic Installation • Pump motor power: 75 kW • Installed heating capacity: 36 kW • Number of cylinder heating zones: 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with full-colour touchscreen. Plasticizing unit Nodpfxexdd Sps Ah Uowg Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamp force: 3,000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1,050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke: 200 mm Ejector force front/rear: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2,006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater power: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part release on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing System Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle opening: 9 mm Technical Specifications (standard version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force, forward/back: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Shot volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection capacity: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of barrel heating zones: 7 Dry cycle time (per Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 38.5 t Nwodpfxoxdd U Dj Ah Uog Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of production: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen traverse force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould height: 330 mm Open daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Nwsdpfxsxak Uco Ah Usg Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-Hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles per Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (with control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Brizgalni stroj Krauss Maffei KM 80-380 CX Nwodpfx Ahsxw Upfo Ueg Leto izdelave: 2010 Enota za zapiranje Zapiralna sila: 800 kN Dimenzije vpenjalnih plošč (V × Š): 670 × 670 mm Prostor med stebri (V × Š): 420 × 420 mm Višina orodja (min./maks.): 250 mm Maksimalna odprtina: 750 mm Vbrizgalna enota Premer polža: 40 mm Volumen vbrizga: 201 cm³ Masa vbrizga (PS): 183 g Tlak vbrizga: 1860 bar Elektro-hidravlična oprema Moč črpalnega motorja: 15 kW Moč grelcev: 10,9 kW Dimenzije in teža Dimenzije stroja (d × š × v): 4,09 × 1,48 × 2,02 m Teža (z električno omaro): 3,55 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 control units on the movable platen. The machine is equipped with a PV (proportional valve) injection unit regulation system. Control is provided by a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation via ProcessDesigner. Plasticising unit: Complete system for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Maximum opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle touch force: 166 kN Electrical-hydraulic equipment: Pump motor power: 120 kW Heater power: 59 kW Nwsdpfxowyxbgs Ah Ujg Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight: Net weight (incl. control cabinet): 40 tonnes Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m