Kraussmaffei Km 120-380 Ex nakup rabljenega (27.891)

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 1.500 kN, Oprema: dokumentacija / priročnik, Brizgalni stroj KM 150-700/C2 Enota za zapiranje 1. Zapiralna sila: 1500 kN 2. Velikost plošče (š × v): 780 × 790 mm 3. Odpiranje kalupa: 600 mm 4. Razdalja med vodili (š × v): 500 × 500 mm 5. Minimalna vgradna višina orodja: 300 mm 6. Izmetni hod: 150 mm 7. Vroči kanal – število uporabljenih con: 12 8. Upravljanje pnevmatskih ventilnih zatičev: 1 kos Hnedpfx Ahoyfm Ahsuol Brizgalna enota 1. Premer polža: 45 mm 2. Vbrizgalni tlak: 2336 bar 3. Največja količina vbrizga: 305 cm³ 4. Največja masa vbrizga (PS): 278 g 5. Jedra: 2× hidravlični krog (BAP) 6. Polž - razmerje L/D: 22

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Hnedpsymn Rvefx Ahuol Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Hjdpfx Ahoymn Nfoujnl Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, tlak vbrizgavanja: 1.795 letvica, odmični hod: 2.100 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Movable platen opening force: 89 kN Movable platen closing force: 92 kN Mounting platen (H x V): 1,600 x 1,550 mm Clear space (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Max. mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Rated output of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Operating hours: 50,000 h Hnodpfxsyv Acmj Ahujl EQUIPMENT Swing-out elements 1 x air valve Tie-bar pulling device 3 x hydraulic core puller at movable platen (BWAP) 2 x hydraulic core puller at fixed platen (FWAP) 20 x hot runner control zones Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection moulding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 8000 kN - Distance between tie bars (h x v): 1120 x 1000 mm - Max. mold opening distance: 1400 mm - Min./max. mould installation height: 600/1100 mm - Movable platen stroke: 2000 mm - Ejector stroke: 250 mm - Ejector force: 226 kN (reverse: 59 kN) INJECTION UNIT - Screw diameter: 95 mm - L/D ratio: 23 Hnjdpfxonh Rwgj Ahuol - Injection pressure: 1795 bar - Injection volume: 3367 cm³ - Shot weight for PS: 3064 g - Injection rate: 690 cm³/s - Nozzle contact force: 166 kN Electrical Parameters - Pump connected load: 90 kW - Heating capacity: 61 kW Weight and Dimensions - Net weight: 45 t - Machine dimensions (L x W x H): 10.4 x 2.86 x 2.39 m As a rule, we deliver this system in fully functional basic condition. In addition, as the manufacturer of these systems, we can offer various additional options depending on individual requirements, such as: - Possible control system upgrades to extend the service life of the machine - Energy optimization upgrades - If required, integration with KraussMaffei digital products - Plasticizing unit retrofits - Optional: Organization and handling of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) With us, you benefit from first-class service and have the option to purchase ready-made spare parts packages with wear parts to ensure seamless production with your new pre-owned machine. Don’t hesitate – contact us today!

Stanje: rabljeno, Leto izdelave: 2006, Brizgalni stroj Krauss Maffei KM 800-4300 MX, letnik 2006 Stroj je opremljen kot sledi: - 5 hidravličnih kaskadnih krmiljenj - Brizgalna enota s cilindrom 90 - Krmiljenje MT5 - Prijemalo Krauss Maffei - 2 transportna trakova Hnodpfx Aew Hwr Dehusl

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Hnodpfx Asw Hwthjhuel

Stanje: rabljeno, Leto izdelave: 2004, Krauss Maffei KM125-390 C2 (letnik 2004) Zapiralna sila: 125 kN Delovne ure: cca 63.000 h Hnodpfx Ajw D Rmishuel Stroj si je možno ogledati kadarkoli

Stanje: rabljeno, Leto izdelave: 1999, Brizgalni stroj Krauss-Maffei 800 /5700MC, letnik 1999 naprodaj. Tehnični podatki na zahtevo. Hnedpeyg Hbgjfx Ahusl

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 504212, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, razmak između stupova: 900 mm, tlak vbrizgavanja: 1.742 letvica, vgradna višina: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Max. mould opening distance: 1,170 mm Min. mould installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force reverse: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Hnjdpfew Dy Rwsx Ahujl Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3 phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged by agreement at an additional cost.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral Hnedsuggb Dspfx Ahusl WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry. Hnsdpfx Aew U N Ixshujl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 6.200 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.200 kN, premer vijaka: 75 mm, Krauss-Maffei KM 420-2000 CX Injection moulding machine from Krauss-Maffei with a 420-tonne clamping force. Only 6,000 operating hours in automatic mode. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras include: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The injection moulding machine is delivered REFURBISHED by the UK Transitus technical expert team. Commissioning at customer facilities can be offered, ensuring machine functionality upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g MAXIMUM DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOULD THICKNESS: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm Hedpfowq D Efex Ahusnl CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ Hnedpfxsw Avafe Ahujl INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 operating hours in automatic mode. The machine will be delivered fully refurbished. REFURBISHED MACHINE Equipment: - 6 pneumatic cascade valves - 24 hot runner zones - 1 core puller on the fixed platen Hsdpfx Ahehy Nnbjusnl - 1 core puller on the moving platen - Electric screw drive Technical specifications: - CLAMPING FORCE: 6,500 kN - PLATEN SIZE: 1,540 x 1,440 mm - CLEARANCE BETWEEN BARS: 1,110 x 960 mm - MAX. MOULD OPENING STROKE: 1,150 mm - DAYLIGHT OPENING: 1,750 mm - SCREW DIAMETER: 90 mm - MIN. MOULD INSTALLATION HEIGHT: 600 mm - YEAR OF MANUFACTURE: 2004 - SHOT VOLUME: 1,953 cm³ - SHOT WEIGHT: 1,777 g - INJECTION PRESSURE: 1,742 bar

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 82.540 h, Machine de moulage par injection Krauss Maffei Modèle : KM 800-5700 MC Année : 1999 Hnodpfx Ahjyup D Hjujl Vis : 105 mm 4 tiroirs noyau 1 électrovanne d’air AS Env. 82 540 heures de fonctionnement Hauteur d’installation : min. 600 mm, max. 1 100 mm Course d’ouverture : 1 400 mm Dimensions des plateaux : 1 300 mm x 1 300 mm Espacement entre colonnes, horizontal : 1 120 mm, vertical : 1 000 mm Bague de centrage : 250 mm 8 circuits d’eau chacun Convoyeur Carénage Système de manipulation Contrôlée et raccords de pompe étanchéifiés par KM en 2025 La machine est fonctionnelle et toujours en production Localisation : Thuringe _____ Nos conditions générales s’appliquent ; par ailleurs, le vendeur ne répond pas des erreurs de saisie ou de transmission des données. Les informations et photos ont été fournies par le propriétaire et autorisées à la publication. L’état visuel des objets proposés correspond à leur âge et aux images présentées. La technique et l’usure des objets proposés sont conformes à leur âge. Machines d’occasion vendues exclusivement à des professionnels et sans garantie.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Hnedeub S R Hepfx Ahuol Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Rabljeni stroj Hnodpfxou Ti Srs Ahusl Brizgalni stroj Proizvajalec: Krauss Maffei KM 80 C1 Letnik: 2000 Na zalogi je le še 1 stroj Ni dobavnega roka, takoj dobavljivo Ogled možen po predhodnem dogovoru Stroj ni več priključen na elektriko / noben priključek za hladilno vodo Stroj je strokovno uskladiščen Tehnični podatki: Zapiralna sila (kN): 800 kN Pritrdilna plošča (mm): 610×610 Razdalja med stebri (mm): Vgradna višina (mm): 250 Odprtina med ploščami (mm): 750 Krmiljenje: MC4 Zaslon v nemškem jeziku (ni mogoče spremeniti v druge jezike) Brizgalna enota Premer polža (mm): 45 Brizgalni tlak (bar): 1878 Prostornina hoda (cm³): 275 Moč pogona črpalke (kW): 18,5 Grejna moč (kW): 13 Polnjenje olja (l): 270 Dimenzije (m): 4,3 x 1,4 x 2,1 Skupna masa: 3,2 t Dodatne fotografije na zahtevo.

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Hnodpeuiykdsfx Ahujl

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je dvokomponentni brizgalni stroj Krauss Maffei Multinject. Zapiralna sila: 3500kN, dimenzije plošč X/Y: 1280mm/1190mm, drugi agregat: 390CZ. Dimenzije stroja X/Y/Z: pribl. 6300mm/2000mm/3100mm, teža: pribl. 17000kg, krmiljenje: Krauss Maffei MC4, obratovalne ure: 78424h. Krmiljenje je v okvari. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hnjdpfx Ajxx Uf Aehuel

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Two Krauss Maffei injection molding machines are available: 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30 mm, L/D ratio: 23, injection pressure: 2500 bar, shot volume: 85 cm³, machine dimensions (L/W/H): approx. 3200 mm / 1350 mm / 1800 mm, weight: approx. 2500 kg, control system: MC4, operating hours: approx. 86,000 h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45 mm, L/D ratio: 20, injection pressure: 1878 bar, shot volume: 217 cm³, machine dimensions (L/W/H): approx. 4500 mm / 1550 mm / 2200 mm, weight: approx. 5500 kg, control system: MC4, operating hours: approx. 82,000 h. Hnsdpfew Emybjx Ahusl Documentation is available. Inspection on site is possible.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Clamping force: 1,500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2,336 bar. Machine dimensions X/Y/Z: approx. 4,700 mm / 1,550 mm / 2,200 mm, weight: approx. 7,000 kg, control system: MC4. Including Sepro handling robot. Documentation available. On-site inspection possible. Hnsdpsw Hthzjfx Ahuel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Poids de dose en polystyrène : 278 g Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h Hnedpfx Ahsx Uqa Deusl La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, KM 500/2700C2 Technical Data Clamping Side: Clamping force: 5000 kN Tie bar spacing (h x v): 900 x 800 mm Min. mould height: 480 mm Max. platen distance: 1650 mm Centring diameter: 200 mm Mould weight: 7900 kg Injection Side: Screw diameter: 80 mm Shot volume: 1433 cm³ Injection pressure: 1829 bar Equipment: Hodpex Uqawsfx Ahujnl MC 4 control system Core pulls: 2+2 Machine is sold without robot and peripherals!

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t Hnjdpetunccjfx Ahuol From series production