Kraussmaffei Km 120-380 Ex nakup rabljenega (27.891)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Hannover
791 km
Stroj za brizganje
KraussMaffeiKM 120-380 EX aus Reinraumfertigung
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 61.300 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, razmak između stupova: 470 mm, pritisk: 2.429 letvica, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine:
We are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards.
We have been a wholesaler of injection moulding machines for over 25 years.
++++From Pharmaceutical Cleanroom Production++++
Manufacturer: KraussMaffei
Machine type: KM 120-380 EX
International designation: 380 EX / 120
Machine no.: 61011287
Year of manufacture: 2008
Hnjdey D Adtjpfx Ahujl
Operating hours: 61,300 h
Control system: MC5
Closing Unit Technical Data
Clamping force: 1,200 kN
Tie bar spacing (H x V): 470 x 470 mm
Platen size (H x V): 780 x 735 mm
Min. mould height: 200 mm
Max. mould height: 450 mm
Max. daylight: 850 mm
Opening stroke: 400 mm
Ejector stroke: 150 mm
Ejector force: 22 kN
Centric location moving platen D: 160 mm
Centric location fixed platen D: 125 mm
Permissible mould weight: 1,485 kg
Injection Unit Technical Data
Screw diameter: 35 mm
Shot volume: 156 ccm
Injection pressure: 2,429 bar
Screw length: 23 L/D
Screw speed: 289 rpm
Plasticising rate: 27 g/s PS
Free-flow injection rate: 477 g/s PS
Number of heating zones: 5
Dimensions & Weight
Machine dimensions (LxWxH): 6m x 1.7m x 2.19m
Total weight: 9,700 kg
Equipment
Display language German
Display language English
+++Extras+++
Automation: Handling device/Take-out robot included - Handling: LR 100-2300
Conveying system: Roller conveyor included
CE mark: Present
Complete maintenance and inspection history
Full latest test report
Incl. conveyor belt and protective cage
Machine with water battery
Machine without material hopper
Levelling elements
EUROMAP 12 interface
Electrical Equipment
Schuko socket 10A
CEE socket 16A
Voltage: 400 V
Frequency: 50 Hz
Motor current: 80 A
Warranty
Warranty until initial commissioning
Loading/Shipping
Free loaded onto the buyer's truck or free delivered within Germany against freight charge.
Available ex our warehouse Hannover, Germany.
Mali oglas
Langenfeld (Rheinland)
808 km
Stroj za brizganje
KraussMaffeiKM 120-380 EX
Pokliči
Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 10.113 h, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, razmak između stupova: 470 mm, delovna prostornina: 156 cm³, tlak vbrizgavanja: 2.429 letvica, skupna dolžina: 6.000 mm, skupna širina: 1.700 mm, skupna višina: 2.190 mm, Zapiralna sila: 1200 kN
Razmak med stebri (v x š): 470 x 470 mm
Velikost plošče (v x š): 780 x 735 mm
Minimalna vgradna višina: 200 mm
Maksimalna vgradna višina: 450 mm
Maksimalni razmak plošč: 850 mm
Hnedoyv Dvbspfx Ahuol
Hod odpiranja: 400 mm
Premer polža: 35 mm
Vsebina brizga: 156 ccm
Tlak brizganja: 2429 bar
Oprema
Ekranski prikaz v nemščini
Ekranski prikaz v angleščini
CEE vtičnica 16A
Hidravlični izvlek jedra 2x
Stroj z vodnim hlajenjem
Stroj brez materialnega lijaka
Nivelirni elementi
Vmesnik EUROMAP 12
Schuko vtičnica 10A
Mere stroja D x Š x V: 6m x 1,7m x 2,19m
Skupna teža: 9700 kg
Mali oglas
Cantabria
1.511 km
Stroj za brizganje
KraussMaffeiKM 120-380 EX
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Horizontal injection molding machine from Krauss-Maffei with 120 tons clamping force. All-electric machine. Year of manufacture: 2008. MC5 control system. 63,000 operating hours. 40 mm screw diameter. Extras: anti-vibration plates, 8-zone flowmeter. Additional options: 1x pneumatic valve, 6 hot runner zones, Euromap 67 interface for robot connection. The machine is delivered REFURBISHED by our technical team and in optimum working condition. We can offer commissioning service at your facility.
Technical Details
INJECTION WEIGHT: 185 g
INJECTION VOLUME: 201 ccm
OPERATING HOURS: 63,000
Hnsdpfxettgybs Ahuel
YEAR OF MANUFACTURE: 2008
TIE BAR DISTANCE: 470x470 mm
PLATEN DIMENSIONS: 780x770 mm
CLAMPING FORCE: 1,200 kN
INJECTION PRESSURE: 1,860 bar
SCREW DIAMETER: 40 mm
MINIMUM MOLD HEIGHT: 200/450 mm
OPENING STROKE: 850 mm
Mali oglas
Vaterstetten
330 km
Stroj za brizganje
KraussMaffei Technologies GmbHKM 120 / 380 PA G01
Pokliči
Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61035145, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 2.429 letvica, injekcijska masa: 140 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 120 mm, odmični hod: 950 mm, vgradna višina: 450 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 6.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection molding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines:
The base injection molding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market requirements. It combines high performance, easy operation, and short delivery times. It can be used in a wide range of applications, for example in the packaging industry, electrical and electronics industry, medical technology, and the automotive industry. Your benefits:
– Optimized price-performance ratio for a wide range of applications
– High energy efficiency thanks to the all-electric machine concept
– Realization of demanding delivery times thanks to the base machine concept with a wide range of options
TECHNICAL DATA:
KM 160 / 750 PA G01 (Order 38670011)
(Machine no.: 61036683, new, year 2013)
CONTROL SYSTEM
MC P1 with 15" TFT color display with multitouch functions
CLAMPING UNIT
Clamping force kN 1200
Maximum mold opening force kN 180
Tie bar spacing (h x v) mm 520 x 470
Mounting platen (h x v) mm 690 x 640
Mold height min. - max. mm 180 - 450
Maximum opening stroke mm 850
Maximum mold opening travel mm 450
Ejector drive electric
Ejector stroke mm 120
Ejector force forward/backward kN 27 / 33
Ejector speed forward/backward mm/s 300 / 300
Maximum mold weight kg 850
INJECTION UNIT
Screw diameter / type mm 35 / standard
Effective L/D ratio 22.9
Injection pressure bar 2429
Shot volume cm³ 154
Shot weight at max. stroke for PS g 140
Injection speed mm/s 200
Injection flow rate cm³/s 192
Hnedpoy Rmwdjfx Ahuel
Screw drive / speed 1/min 374
Plasticizing rate (standard screw)4) g/s 18.9
Nozzle contact force kN 34
ELECTRICAL PARAMETERS
Connected load kW 22.7
Installed heating power kW 11.5
Power supply V / Hz 200 / 50 3-phase with neutral
WEIGHT AND DIMENSIONS
Net weight with control cabinet t 6.7
Length x width x height m 5.18 x 1.76 x 1.90
ADDITIONAL EQUIPMENT
Wear-resistant plasticizing unit
BluePower full insulation for plasticizing cylinder
Open nozzle
Air valve 1-fold (BWAP)
Pneumatic control hot runner shut-off 1-fold
Electrical interface pneumatic cascade 4-fold
Euromap interface for handling E18 + E67
Euromap interface (central computer) E67, E77
Water manifold 4-fold
Electrical pre-equipment for hydraulic auxiliary unit
Automatic central lubrication
Adaptive Process Control (APC)
Injection-compression molding circuit
Graphic analysis package
Swivel device for injection unit
The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered upon request.
We look forward to your inquiry.
Mali oglas
Langenfeld (Rheinland)
808 km
Stroj za brizganje
KraussMaffeiKM 80-380 EX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 49.673 h, Funkcionalnost: omejena funkcionalnost, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 154 cm³, KRAUSS MAFFEI KM 80-380 EX
Číslo skladu: 503232
Výrobce: KRAUSS MAFFEI
Typ: KM 80-380 EX
Ovládání: MC5
Rok výroby: 2008
Provozní doba: 49 673 h
Technická data uzavírací jednotky
Uzavírací síla: 800 kN
Vzdálenost sloupů (š x v): 520 x 420 mm
Rozměry desek (š x v): 640 x 740 mm
Min. výška formy: 300 mm
Max. rozestup desek: 790 mm
Zdvih vyhazovače: 100 mm
Síla vyhazovače: 22 kN
Průměr centrování pohyblivé desky: 125 mm
Průměr centrování pevné desky: 125 mm
Technická data vstřikovací jednotky
Průměr šneku: 35 mm
Objem dávky: 154 ccm
Vstřikovací tlak: 2 429 bar
Poměr L/D šneku: 23 l/d
Otáčky šneku: 477 min⁻¹
Vstřikovací průtok (PS): 289 g/s
Počet topných zón: 5
Rozměry a hmotnost
Rozměry stroje (DxŠxV): 5,35 m x 1,7 m x 2 m
Celková hmotnost: 6 500 kg
Hnedpfxoytd I Ro Ahusl
Vybavení
Obrazovka v němčině
CEE zásuvka 16A
1x vzduchový ventil
Stroj s násypkou
Stroj s vodní baterií
Vyrovnávací prvky
Rozhraní EUROMAP 67 pro manipulaci
USB rozhraní
Schuko zásuvka 10A
Ohřev nástrojů 24x
Mali oglas
Vaterstetten
330 km
Stroj za brizganje
KraussMaffei Technologies GmbHKM 80 / 380 CX G01
Pokliči
Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines:
The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application.
TECHNICAL DATA:
KM 80 / 380 CX G01 (Order 38648713)
CONTROL SYSTEM
- MC 6 with TFT color display and multitouch functionality
CLAMPING UNIT
- Clamping force: kN 800
- Max mold opening force: kN 55
- Tie bar clearance (h x v): mm 470 x 420
- Mounting plate size (h x v): mm 670 x 670
- Mold installation height min.-max.: mm
- Maximum daylight opening: mm 750
- Max. mold opening stroke: mm 500
Hnedjy Rlmwepfx Ahuol
- Ejector drive: hydraulic
- Ejector stroke: mm 150
- Ejector force forward/return: kN 23 / 10
- Ejector speed forward/return: mm/s 760 / 800
- Max. mold weight: kg 1000
INJECTION UNIT
- Screw diameter / Type: mm 40 / Standard (other diameters available)
- Effective L/D ratio: 20
- Injection pressure: bar 1860
- Stroke volume: cm³ 201
- Shot weight at max. stroke for PS: g 183
- Injection speed: mm/s 100
- Injection flow: cm³/s 126
- Screw drive/speed: rpm 295
- Plasticizing rate (standard): g/s 12.3
- Nozzle contact force: kN 50
ELECTRICAL PARAMETERS
- Connected load: kW 15.0
- Installed heating capacity: kW 10.9
- Power supply: V/Hz 400 / 50, 3 phase with neutral
WEIGHT AND DIMENSIONS
- Net weight with control cabinet: t 3.55
- Length x width x height: m 3.96 x 1.48 x 2.02
ADDITIONAL EQUIPMENT
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- 1 additional temperature control zone for nozzle heating
- Air valve, single (BWAP)
- Pneumatic control for hot runner closure, single
- Hydraulic core pull, single (BWAP)
- Euromap interface for handling: E18, E63
- Euromap interface (central computer): E67, E77
- Adaptive Process Control (APC)
- Injection-compression mode
- Graphics analysis package
The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request.
We look forward to your inquiry.
Mali oglas
Vaterstetten
330 km
Stroj za brizganje
KraussMaffei Technologies GmbHKM 80 / 380 PA G01
Pokliči
Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines:
The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits:
– Optimized price-performance ratio for a broad range of applications
– High energy efficiency thanks to a fully electric machine concept
– Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options
TECHNICAL DATA:
KM 160 / 750 PA G01 (Order 38670011)
(Machine No.: 61036683, new, year 2013)
CONTROL SYSTEM
- MC P1 with 15" TFT colour display with multi-touch functions
CLAMPING UNIT
- Clamping force: 1600 kN
- Maximum mould opening force: 120 kN
- Daylight (H x V): 570 x 520 mm
- Mounting platen (H x V): 770 x 720 mm
- Mould installation height min. – max.: 200 – 500 mm
- Maximum opening width: 950 mm
- Maximum mould opening stroke: 450 mm
- Ejector drive: electric
- Ejector stroke: 100 mm
- Ejector force, forward/reverse: 33 / 33 kN
- Ejector speed, forward/reverse: 300 / 300 mm/s
Hnedpfx Ajyzz Irshuol
- Maximum mould weight: 1200 kg
INJECTION UNIT
- Screw diameter / type: 50 mm / standard
- Effective L/D ratio: 20.2
- Injection pressure: 1,892 bar
- Stroke volume: 393 cm³
- Shot weight at max. stroke for PS: 358 g
- Injection speed: 200 mm/s
- Injection flow rate: 393 cm³/s
- Screw drive / rotation speed: 267 rpm
- Plasticizing throughput (standard screw): 36.5 g/s
- Nozzle contact force: 42 kN
ELECTRICAL PARAMETERS
- Connected load: 31.2 kW
- Installed heating capacity: 15.5 kW
- Power supply: 400 V / 50 Hz, 3 phases with neutral
WEIGHT AND DIMENSIONS
- Net weight (incl. control cabinet): 9.7 t
- Length x width x height: 5.65 x 1.82 x 1.95 m
ADDITIONAL FEATURES
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- Air valve, single (BWAP)
- Pneumatic control for hot runner shut-off, single
- Electrical interface for pneumatic cascade, 4-fold
- Euromap interface for handling: E18 + E67
- Euromap interface (central computer): E67, E77
- Water manifold, 4-fold
- Electrical pre-installation for hydraulic auxiliary unit
- Automatic central lubrication
- Adaptive Process Control (APC)
- Injection compression moulding circuit
- Graphic analysis package
- Swivel device for injection unit
The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request.
We look forward to your enquiry.
Mali oglas
Hannover
791 km
Stroj za brizganje
KraussMaffeiEX 80-380 vollelektrisch/full electrical
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 35.808 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 204 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 186 g, Here, we as a dealer of injection moulding machines offer the following well-maintained, used injection moulding machine for sale.
Of course, we also buy well-maintained injection moulding machines from model year 2010 onwards.
We have been a wholesaler for injection moulding machines for over 25 years.
Manufacturer: KraussMaffei
Model: KM EX 80-380 (fully electric)
Serial no.: 61013142
Year of manufacture: 2009
Operating hours: 35,808 h
Control: MC 5
Fully functional
Condition: very well maintained
Machine from German first ownership
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Pneumatic shut-off nozzle
- 1 pneumatic valve at BWAP
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Reject sorting chute
- Nozzle protection door – ejector area safety door foldable
- Euromap interface 18 on FWAP
- Ejector plate electrically operated in BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection-compression moulding circuit
- 2x hydraulic core pull (on BWAP and FWAP)
- Pressure relief for core pull on BWAP and FWAP
- 8-circuit water manifold
- 8x temperature control zones for hot runner
- Extrusion injection circuit with position control
- 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A
- EUROMAP 67 signal interface for robot
- Start-up circuit, quality assurance package, cycle time analysis, cycle memory, event log
Hjdoyrd U Uepfx Ahuonl
- BluePOWER package – energy consumption display
- Graphical analysis package, trend graphics
- Interface for temperature control unit
- Cycle time analysis, actual cycle time optimization
Main language: German
Injection unit
Screw diameter: 40 mm
Shot weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping unit
Clamping force: 80 t / 800 kN
Tie bar spacing: 420 x 420 mm
Mounting plates: 655 x 670 mm
Mould height: 250 mm
Max. platen distance: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit fully electric
Warranty:
Warranty until initial commissioning
Loading/Shipping:
Free loading onto buyer’s truck or free delivery (ex works) against reimbursement of freight costs
Available from our warehouse in Hannover, Germany
Mali oglas
Vaterstetten
330 km
Stroj za brizganje
KraussMaffei Technologies GmbHKM 80 / 380 PA G01
Pokliči
Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines:
Hsdpfx Ahjud H Dmsuonl
The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits:
– Optimised price-performance ratio for a wide range of applications
– High energy efficiency thanks to the fully electric machine concept
– Fast delivery through a base machine concept with a broad range of options available
TECHNICAL DATA:
KM 80 / 380 PA G01 (Order 38670023)
CONTROL SYSTEM
MC P1 with 15" TFT colour display with multi-touch functions
CLAMPING UNIT
Clamping force kN 800
Maximum mould opening force kN 120
Daylight (h x v) mm 470 x 420
Mounting platen (h x v) mm 610 x 560
Mould height min. – max. mm 150 - 400
Maximum opening span mm 750
Maximum mould opening stroke mm 350
Ejector drive electric
Ejector stroke mm 100
Ejector force fwd/rev kN 22 / 22
Ejector speed fwd/rev mm/s 300 / 300
Maximum mould weight kg 600
INJECTION UNIT
Screw diameter / type mm 40 / Standard
Effective L/D ratio 20.0
Injection pressure bar 1860
Shot volume cm³ 201
Max. shot weight for PS g 183
Injection speed mm/s 200
Injection flow rate cm³/s 251
Screw drive/speed 1/min 334
Plasticising rate (standard) g/s 24.7
Nozzle contact force kN 34
ELECTRICAL PARAMETERS
Connected load kW 20.6
Installed heating capacity kW 11.5
Power supply V / Hz 400 / 50 3 phase with neutral conductor
WEIGHT AND DIMENSIONS
Net weight with control cabinet t 5.6
Length x width x height m 4.75 x 1.67 x 1.85
ADDITIONAL EQUIPMENT
Wear-resistant plasticising unit
BluePower full insulation for plasticising cylinder
Open nozzle
Air valve, single (BWAP)
Pneumatic operation for hot runner shut-off, single
Electrical cascade interface, 4-fold
Euromap interface (handling), E18, E63
Euromap interface (central computer), E67, E77
Water manifold, 4-fold
Automatic central lubrication system
Adaptive Process Control (APC)
Injection-compression moulding circuitry
Graphic analysis package
The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request.
We look forward to your enquiry.
Mali oglas
Vaterstetten
330 km
Stroj za brizganje
KraussMaffei Technologies GmbHKM 80 / 380 CX G06
Pokliči
Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,
Mali oglas
Cantabria
1.511 km
Krauss-Maffei KM 160/380 CX
KraussMaffeiKM 160/380 CX
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, 160 ton Krauss-Maffei brizgalni stroj, letnik 2006, s transportnim trakom. Premer polža 35 mm, 2 izvlečna jedra, 6 vročih kanalnih con. Stroj bo od nas dostavljen prenovljen in ga je možno pri nas prikazati v obratovanju!
Hodpfx Aeh Dh Dujhuenl
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 80-380 CX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Brizgalni stroj Krauss Maffei KM 80-380 CX
Leto izdelave: 2010
Enota za zapiranje
Zapiralna sila: 800 kN
Dimenzije vpenjalnih plošč (V × Š): 670 × 670 mm
Prostor med stebri (V × Š): 420 × 420 mm
Višina orodja (min./maks.): 250 mm
Maksimalna odprtina: 750 mm
Vbrizgalna enota
Hnodpfx Ahjxw Upfjusl
Premer polža: 40 mm
Volumen vbrizga: 201 cm³
Masa vbrizga (PS): 183 g
Tlak vbrizga: 1860 bar
Elektro-hidravlična oprema
Moč črpalnega motorja: 15 kW
Moč grelcev: 10,9 kW
Dimenzije in teža
Dimenzije stroja (d × š × v): 4,09 × 1,48 × 2,02 m
Teža (z električno omaro): 3,55 t
Mali oglas
Burgoberbach
476 km
Stroj za brizganje
KraussMaffeiKM 110-380CX
Pokliči
Leto izdelave: 2008, stanje: dober (rabljeno), For sale is an injection moulding machine from Krauss Maffei, model KM 110-380.
The machine is in good to very good condition, with all maintenance and inspections carried out.
Hjdpoibyatofx Ahuonl
Technical data:
Year of manufacture: 2008
Extended tie bars
Pneumatic needle shut-off
2x hydraulic core pulls
31,000 operating hours
Screw diameter: 35 mm
Clamping force: 1,100 kN
Mould opening force: 70 kN
Euromap 63 interface for version >1-04-09
Nitrogen accumulator included
Included components:
Wedge shoes with bolts and nuts
Double-bit key
CE declaration of conformity – complete control cabinet
Certificate
USB memory stick
Ejector coupling (mechanical) supplied in control cabinet
All prices plus VAT.
Machinery purchase and sale
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE.
Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine?
For further information or contact options, please visit our website.
Mali oglas
Halver
785 km
Stroj za brizganje
KraussMaffeiKM 1300-12000 MX inkl. KUKA Roboter
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 81.000 h, Tehnični podatki
Leto izdelave: 2007
Stran zapiranja
Zapiralna sila: 1300 t
Maks. hod odpiranja/vgradna višina: 2300 mm
Največja razdalja med vpenjalnimi ploščami: 4000 mm
Najmanjša/največja višina orodja: 1000 - 1700 mm
Največja višina vpenjalne plošče: 1910 mm
Najmanjša velikost orodja: 1000 - 1700 mm
Svetla razdalja med stebri: 1500 mm
Radij šobe: R40 mm
Teža orodja: 29000 kg
Izmetni hod: 350 mm
Brizgalna stran
Premer polža: 135 mm
Volumen hoda: 8588 ccm
Hsdjyifgkspfx Ahusnl
Jedrni izvleki AWS/DS: 1/1
Iglasti pnevmatski zapiralnik: 1
Stroj se dostavi z robotom Kuka in je lahko ogledan v proizvodnji.
Mali oglas
Nemčija
650 km
Stroj za brizganje
KraussMaffeiKM 1300-12000 MC
Pokliči
Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), A large-format Krauss-Maffei injection molding machine without robot, conveying equipment, safety enclosure, or attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Overall system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83,000kg, operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected to be available from Q1/2026.
Hsdpfx Aewut Hyohuonl
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 1100–12000 MX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine
Year of manufacture: 2008
Robot: Wittmann
Hjdpex Tgbhjfx Ahujnl
Fully hydraulic clamping system.
MC5 control system with colour display, integrated control panel and built-in 3 USB ports.
Plasticising unit:
Complete plasticising unit for thermoplastics with abrasion-resistant design, 120 mm screw diameter, non-return valve and open nozzle.
Technical data
Clamping unit
Clamping force: 11,000 kN
Mould opening force: 770 kN
Platen dimensions (H × V): 2,210 × 1,910 mm
Tie bar spacing (H × V): 1,550 × 1,250 mm
Mould opening stroke: 2,000 mm
Mould height (min–max): 600 – 1,200 mm
Platen daylight: 2,600 mm
Ejector stroke: 300 mm
Ejector force: 220 / 110 kN
Injection unit
Screw diameter: 120 mm
Injection pressure: 1,758 bar
Shot volume: 6,786 cm³
Shot weight (PS): 6,175 g
Screw speed (standard / option): 103 / 145 rpm
Injection rate (standard): 1,118 cm³/s
Injection rate (accumulator): 1,696 cm³/s
Electrical and hydraulic equipment
Pump motor rated power: 132 kW
Installed heater capacity: 82 kW
Number of cylinder heating zones: 7
Number of dry cycles (Euromap): 802 1/h
Oil tank capacity: 2,440 l
Dimensions and weight
Net weight with control cabinet: 73 t
Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 850-12000 MX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine
Year of manufacture: 2011
LRX 500 Robot
Z-axis: 4000 mm
X-axis: 1500 mm
Y-axis: 1250/1250 mm
Hydraulic-mechanical, two-platen clamping system with 4 pressure pads and 4 locking units on the movable platen.
PV - injection unit control adjustment.
MC 5 control system with colour monitor, integrated control panel and USB data carrier.
Plasticising unit:
Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle.
Nozzle radius: 25 mm, nozzle orifice: 9 mm
TECHNICAL DATA
Clamping Unit
- Clamping force: 8,500 kN
- Mould opening force: 560 kN
- Platen dimensions (H x V): 1600 x 1600 mm
- Tie bar clearance (H x V): 1140 x 1140 mm
- Mould opening stroke: 1600 mm
- Mould height (min-max): 500 - 1100 mm
- Daylight: 2100 mm
- Ejector stroke: 300 mm
- Ejector force: 200 / 100 kN
Injection Unit
- Screw diameter: 135 mm
- Injection pressure: 1,389 bar
- Injection volume: 8,588 cm³
- Shot weight for PS: 6,098 g
- Injection rate: 1,414 cm³/s
Electro-hydraulic equipment
- Rated pump motor power: 132 kW
- Dry cycle time according to Euromap 6: 965 1/h
- Oil tank capacity: 2,440 l
Weight and dimensions
- Net weight with control cabinet: 49 t
- Installation space (L x W x H): 11.72 x 2.92 x 2.71 m
Hedpswqdyiefx Ahujnl
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 2300 - 12000 MC
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 2300 - 12000 MC Injection Moulding Machine
Year: 2004
Control system: MC 4
Operating hours: 93,900
Clamping Unit
Clamping force: 23,000 kN
Maximum mould opening force: 1,420 kN
Moving platen force - Opening: 227 kN
Moving platen force - Closing: 203 kN
Platen size (H x V): 2,830 mm x 2,400 mm
Tie-bar spacing (H x V): 2,000 mm x 1,600 mm
Mould opening stroke: 2,600 mm
Minimum mould height: 1,100 mm
Maximum mould height: 1,800 mm
Maximum daylight: 3,700 mm
Hydraulic ejector stroke: 350 mm
Ejector force forward/backward: 415/115 kN
Injection Unit
Screw diameter: 135 mm
Ls/D ratio: 23
Injection pressure: 1,389 bar
Shot volume: 8,588 ccm
Injection weight, PS: 7,815 g
Injection rate: 1,019 ccm/s
Screw speed: 113 rpm
Max. plasticising rate: 191 g/s
Nozzle pressure: 241 kN
Electrical and Hydraulic Equipment
Pump drive capacity: 132 kW
Installed heating power: 997 kW
Adjustable barrel heating zones: 7
Drying cycles per hour: 350
Tank capacity: 2,500 litres
Dimensions and Weight
Machine dimensions: 15.15 m x 4.15 m x 3.29 m
Total machine weight: 143,000 kg
Max. mould weight: 62,000 kg
LRX 1000 Robot
X-axis: 2,000 mm
Y-axis: 3,000 mm
Hnedpfx Ahewq Ed Aeuol
Z-axis: 5,000 mm
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 850-12000 MX
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX
With Krauss Maffei robot
Year of manufacture: 2011
Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen.
PV - injection unit stroke control.
MC 5 control system with colour monitor, integrated control panel, and USB data carrier.
Plasticizing unit
Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle.
Nozzle radius 25 mm, nozzle orifice 9 mm
Hnjdpfxstrya Re Ahuel
TECHNICAL DATA
Clamping unit
- Clamping force: 8500 kN
- Opening force: 560 kN
- Mounting platen dimensions (h x v): 1600 x 1600 mm
- Tie bar clearance (h x v): 1140 x 1140 mm
- Opening stroke: 1600 mm
- Mould height (min-max): 500 - 1100 mm
- Daylight: 2100 mm
- Ejector stroke: 300 mm
- Ejector force: 200 / 100 kN
Injection unit
- Screw diameter: 135 mm
- Injection pressure: 1389 bar
- Shot volume: 8588 cm³
- Shot weight for PS: 6098 g
- Injection rate: 1414 cm³/s
Electro-hydraulic equipment
- Rated motor power (pump): 132 kW
- Dry cycle time according to Euromap 6: 965 1/h
- Oil tank capacity: 2440 l
Weight and dimensions
- Net weight with control cabinet: 49 t
- Installation space (L x W x H): 11.72 x 2.92 x 2.71 m
Mali oglas
Ober-Mörlen
661 km
Drsna ponjava
Iveco120 E 25 / ex BUNDESWEHR / 51 tkm / TOP ZUSTAND
Pokliči
Stanje: rabljeno, prevoženi kilometri: 51.578 km, moč: 184 kW (250,17 KM), konfiguracija osi: 4x2, vzmetenje: jeklo, Leto izdelave: 2015, Oprema: ABS, Suspension: Leaf suspension
Unladen weight: 4,941 kg
Payload: 7,049 kg
gross vehicle weight: 11,990 kg
Please contact Emal Jaweed for further information.
Iveco Euro Cargo 120E25, Year of Construction: 2015, Mileage: 51,578 km, Length: 9,250 mm, Width: 2,450 mm, Height: 3,700 mm, 4x2, Leaf spring suspension front and rear, Air conditioning, Electric windows, Electric mirrors, Emission standard Euro 6, 8-speed manual transmission, Ramp length: 1,800 mm, Aluminium drop sides 500 mm, Loading area: 7,200 mm, Palfinger MBB C 1500 L with 1,500 kg lifting capacity, Tarp present, German registration, TÜV / Safety Inspection available, Condition: Excellent condition
Miscellaneous:
* We offer over 200 units for sale.
* Our location is 30 km north of Frankfurt/M Airport.
* Financing & leasing possible.
* Specialist for transport & worldwide shipping
* No liability for printing & typing errors
Hnjdpfxsx R T Hfj Ahusl
* Subject to prior sale and errors
* Trade-in possible
* Only the terms and conditions of Jaweed GmbH apply for vehicle/machinery sales.
* For further information and our general terms and conditions, please visit our website. We sell our goods based exclusively on our general terms and conditions (listed: ... / T&Cs).
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 1300-12000 MX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX
Control system: MC5
Year of manufacture: 2012
Clamping unit:
Clamping force [kN]: 13000
Platen dimensions (HxV) [mm]: 2210 x 1910
Tie bar spacing (HxV) [mm]: 1570 x 1270
Min./max. mould height [mm]: 700-1400
Max. opening stroke [mm]: 3050
Max. ejector stroke [mm]: 350
Injection unit:
Screw diameter [mm]: 105
Injection volume [cm3]: 5195
Injection weight PS [g]: 4728
Injection pressure [bar]: 2296
Max. injection speed [g/s PS]: 186
Electrical/hydraulic equipment:
Rated pump motor power [kW]: 132
Rated screw motor power [kW]: 145
Hjdjy Hqwyspfx Ahuenl
Heaters power [kW]: 71
Dimensions and weight:
Net weight with control cabinet [t]: 70
Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82
Additional equipment:
Parallel movements: Independent hydraulic screw drive
Hot runners: 12 integrated temperature control zones
Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen)
Pneumatics: 2 air blow valves + 1 valve for hot runner needle control
Hydraulic accumulator
Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen)
Interfaces: Euromap 67 and Euromap 18
Insulation: BluePower – cylinder thermal insulation
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 1100-12000 MX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX
Basic Information
Manufacturer: Krauss Maffei
Model: KM 1100-12000 MX
Year of manufacture: 2008
Control system: MC5
Control panel: colour monitor integrated with the control desk
Interfaces: 3 USB ports
The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing, featuring abrasion protection.
Clamping Unit
Clamping force: 11,000 kN
Mould opening force: 770 kN
Platen dimensions (H × V): 2210 × 1910 mm
Tie bar spacing (H × V): 1550 × 1250 mm
Mould opening stroke: 2,000 mm
Minimum mould height: 600 mm
Maximum mould height: 1,200 mm
Platen stroke: 2,600 mm
Ejector stroke: 300 mm
Ejector force: 220 / 110 kN
Injection Unit
Screw diameter: 120 mm
Maximum injection pressure: 1,758 bar
Injection volume: 6,786 cm³
Shot weight (PS): 6,175 g
Screw speed (standard / option): 103 / 145 rpm
Injection rate (standard): 1,118 cm³/s
Injection rate (accumulator): 1,696 cm³/s
Electrical and Hydraulic Equipment
Pump motor rated power: 132 kW
Installed heater power: 82 kW
Number of barrel heating zones: 7
Number of dry cycles (EUROMAP): 802 cycles/h
Hydraulic oil tank capacity: 2,440 l
Machine Dimensions and Weight
Net weight (with control cabinet): 73 t
Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m
Optional Energy Saving System ESS (Energy Saving Systems)
Hodpfx Aeyugfzshujnl
The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter, adjusting the motor speed to the actual demand during the production cycle.
Key benefits:
- Reduction of electric energy consumption by up to 30%
- Servo-driven hydraulic pump technology
- World-class, proven technology used in plastics processing industry
- Reduction of energy loss during idle operation
- Lower heating of the hydraulic system
- Prolonged lifespan of motor and hydraulic components
- Can be retrofitted to existing hydraulic injection moulding machines
The ESS system allows you to significantly reduce running costs while maintaining full production parameters.
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 1300-12000 MX
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Krauss Maffei KM 1300-12000 MX injection moulding machine
Manufacturer: KraussMaffei
Model: KM 1300-12000 MX
Year of manufacture: 2012
The machine is designed for processing thermoplastics and is equipped with a complete plasticizing unit featuring abrasion protection.
Technical Specifications
Clamping Unit
Clamping force: 13,000 kN
Hnodpfoyrrwkex Ahuel
Mould opening force: 910 kN
Platen dimensions: 2210 × 1910 mm
Tie bar clearance: 1570 × 1270 mm
Ejector stroke: 350 mm
Ejector force: 250 / 125 kN
Injection Unit
Screw diameter: 105 mm
Injection pressure: 2296 bar
Shot volume: 5195 cm³
Shot weight for PS: 4728 g
Injection rate: 856 cm³/s
Plasticizing Parameters
Screw speed: 103 / 145 rpm
Plasticizing rate (PS):
- Standard speed: 122 g/s
- Increased speed (option): 171 g/s
Electro-hydraulic Equipment
Nominal pump motor power: 132 kW
Installed heater power: 71 kW
Number of barrel heating zones: 7
Dry cycle time according to Euromap 6: 765 cycles/h
Hydraulic oil tank capacity: 2440 l
Dimensions and Weight
Net weight with control cabinet: 70 tons
Installation dimensions:
13.03 × 3.65 × 2.82 m
Mali oglas
Nürnberg
470 km
Stroj za brizganje
KraussMaffeiKM 50-90 C1/50
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 44731, vpenjalna sila: 500 kN, premer vijaka: 25 mm, razmak između stupova: 320 mm, injekcijska masa: 47 g, minimalna višina orodja: 200 mm, odmični hod: 550 mm, skupna dolžina: 4.000 mm, skupna širina: 1.163 mm, skupna višina: 1.787 mm, skupna masa: 2.300 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vhodni tok: 58 A, Please refer to the images and video for the condition and contents of the offer.
The system is currently disassembled.
The device/system offered here has been tested and is fully functional and ready for operation.
The purchase price includes VAT.
You will receive a proper invoice.
For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied.
Subject to prior sale.
Visit our website to view this and other available offers.
Hodpfxox Srggo Ahusnl
The stated company names and trademarks are the property of their respective owners and are used for identification and product description purposes only.
Deviations from technical data or errors in the item description may occur and are reserved.
Mali oglas
Hambach
678 km
Stroj za brizganje
KraussMaffeiKM 4000-19000 MC
Pokliči
Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 98.806 h, vpenjalna sila: 40.000 kN, premer vijaka: 130 mm, injekcijska masa: 8.100 g, skupna dolžina: 4.900 mm, skupna višina: 4.200 mm, skupna masa: 255.000 kg, # 🇫🇷 Annonce de Vente
Hsdpfsyt Hy Nex Ahuonl
2x KraussMaffei KM 4000-19000 MC – Presses à injecter – Année 1998
À vendre : deux presses à injecter identiques du fabricant KraussMaffei, modèle KM 4000-19000 MC, équipées d’une commande MC3F. Ces machines sont spécialement conçues pour la production de grandes pièces plastiques nécessitant une très forte force de fermeture.
Les installations sont entièrement équipées, comprenant plusieurs périphériques pour l’alimentation matière et la gestion du procédé.
## Données techniques
* Fabricant : KraussMaffei
* Modèle : KM 4000-19000 MC
* Commande : MC3F
* Année de fabrication : 1998
* Heures machine : env. 98 806 h
* Force de fermeture : 40 000 kN
* Poids d’injection max. : 8 100 g
* Diamètre de vis : 130 mm
## Dimensions & Poids
* Profondeur machine : 4 900 mm
* Hauteur machine : 4 200 mm
* Poids machine : env. 255 000 kg
## Équipements
* Interface robot : KUKA KRC4
* Commande d’injection séquentielle : S.I.S.E. IS-Tech
* Thermorégulateurs : GWK
* Système de dosage et de mélange : Motan Colormetric
* Convoyeur à bande
## Machines disponibles
* Machine n°14
* Machine n°15
Les machines peuvent être achetées séparément ou en lot.
Visite sur rendez-vous possible.
Olajšamo vam iskanje: "kraussmaffei km 120-380 ex"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.















































































































































































































































