Stroj za brizganje

KraussMaffei KM 120-380 EX aus Reinraumfertigung

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 450 mm, hitrost vretena (min.): 25 obr/min, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 213 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, prehod palice: 65 mm, CNC Siemens 840 D Območje dela Največji premer vrtenja nad posteljo: 505 mm Premer vrtenja nad sani X: 375 mm Premer glave vpenjala: 210 mm Kapaciteta palice: 65 mm Prečni hod (X): 213 mm Vzdolžni hod (Z): 450 mm Pomiki Hitri pomik osi X/Z: 24/30 m/min Glavno vreteno Priključek vretena (ravna prirobnica): 140 h5 mm Notranji premer prednjega ležaja: 100 mm Glavno vreteno Moč motorja vretena (40/100% ED): 16/12 kW Navor (40/100% ED): 153/115 Nm Hitrost vretena: 25 - 6000 vrt/min Revolver za orodja Število orodnih postaj: 12 Od tega motoriziranih: 12 Premer stebla po DIN 69880: 30 mm Moč motorja (40% ED): 9 kW Maks. navor (40% ED): 20 Nm Maks. hitrost: 4500 min-1 Konjiček Itodpfsw Adhwex Al Nef Hod konjička, avtomatski: 450 mm Vpenjalni konus: CM 4 Maks. pritisk konjička: 400 daN Oprema stroja: • Transporter za odrezke • Priprava za odsesovalec hlapov • 2 aksialna motorizirana modula • 4 radialna motorizirana modula • Fiksni držala za orodja

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6,000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool magazine capacity: 22 stations, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control unit: Heidenhain TNC 426. An on-site inspection is possible. Itodpfev Uqb Njx Al Njf

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m Iodpfx Aepm U U Nol Netf * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials * Inverter power source with digitally controlled, fully electronic process * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet

Stanje: dober (rabljeno), Leto izdelave: 2003, X 1740 mm, Y 766 mm, Z 660 mm Itedpfxowyblzs Al Nef 10.000 obr./min Deli, prikazani na roki, niso vključeni.

Stanje: rabljeno, Leto izdelave: 2010, Travel path - X axis: 1,000 mm Travel path - Y axis: 510 mm Travel path - Z axis: 480 mm Travel path - X axis (rotary/swivel table): 420 mm Travel path - X axis (fixed machine table): 450 mm Control system: HEIDENHAIN iTNC 530 Spindle speed range: 50 - 12,000 rpm Number of tool changer stations: 20 Tool holder: SK40 Clamping surface, machine table: 650 x 510 mm Workpiece weight (main table): 300 kg Clamping surface, rotary/swivel table: 420 mm Workpiece weight (rotary table): 200 kg Itjdpjx R U Rxsfx Al Nsf Rotary table speed: 30 rpm 5-Axis Machining Center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, internal coolant supply, zero-point clamping system, and chip conveyor. The machine also features a full enclosure as well as an extraction system with filter unit. With only 9,787 spindle hours, the machine has low operating hours. The machine is in well-maintained condition and can be inspected under power at any time. A machine video is available on request. For further technical details, please refer to the offer. ----- #Tags: RS505 K IC 40 | RS-505 | RS 505

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm drive: 120 kW – DC (overhauled), drive via belt pulley Heating zones/controllers for downstream equipment Control cabinet, melt pressure sensor Inspection/test run available at short notice by arrangement at our Wuppertal facility. Matching accessories available on request: Isdoiyynwjpfx Al Netf > Screen changer > Pelletizing system (strand, hot-cut, or water-ring) > Other options. Additional extruders and complete lines available for demonstration ex works Wuppertal. We look forward to your enquiry or visit.

Stanje: dober (rabljeno), Leto izdelave: 2012, Deli, prikazani z roko, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Itsdpfx Aoyw Nauol Njf

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.22-00005, Rabljen tračni odvijalnik proizvajalca Bellaform/Pütz Itjdpfxouixhzo Al Nof TIP: A400-40 Leto izdelave: 2013 Kontaktna dolžina: 400 mm Širina traku: 40 mm Hitrost: 386 m/min Popolnoma delujoč

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Isdpfx Asytcf Ujl Notf Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Extrudeuse de laboratoire/d’essai AM-20 avec tête plate / filière à film et unité de calandrage Extrudeuse compacte et verticale de laboratoire ou de recherche AM-20 pour le traitement de divers plastiques comme PP, PE, PS, ABS, PVC et autres granulés plastiques. La machine est équipée d’une tête plate (filière à film) et convient particulièrement à l’extrusion de films, aux essais matériaux, aux essais de couleur et de mélange ainsi qu’aux applications de développement en laboratoire ou atelier technique. L’équipement de calandrage est également compris, comme visible sur les photos. Données techniques : • Modèle : AM-20 • Tension : 110 V / 220 V Itodpfx Aloyyw T Uj Nof • Tension d’alimentation : 2 x 220 V • Puissance : 1000 W • Diamètre de vis : 20 mm • Rapport L/D : 15:1 • Débit : env. 500–1000 g/h • Dimensions : 45 x 25 x 60 cm Convient pour : • Extrusion de films • Essais de laboratoire et de développement • Développement de matériaux • Essais de couleur et de mélange