Hidrobrasil C-Stiskalnica nakup rabljenega (57.033)

Stanje: skoraj kot novo (rabljeno), Dimenzije komore: 280 x 180 x 500 mm (gornja) Nwedpfx Alsd Sm Dijtoi 280 x 130 x 450 mm (donja) Maksimalna temperatura: 700 °C

Stanje: zelo dobro (rabljeno), Ponujam laboratorijski peč Heraeus Kendro UT 6 P z digitalnim upravljalnikom Function Line. Naprava je namenjena sušenju, žarjenju, sterilizaciji in toplotni obdelavi vzorcev v laboratorijih, raziskovalnih ustanovah in industrijskih obratih. Nodpfxjzmamus Altewi Peč je tehnično popolnoma delujoča. Komora, izdelana iz nerjavečega jekla, je čista in v dobrem stanju. Opremljena je s rešetko in vodili, ki omogočajo nastavitev višine police. Tehnični podatki: Proizvajalec: Heraeus / Kendro Laboratory Products Model: UT 6 P Najvišja temperatura: 250 °C Napetost: 230 V / 50–60 Hz Moč: 1,27 kW Nazivni tok: 5,5 A Stopnja zaščite: IP20 Upravljanje: digitalni panel Function Line Komora iz nerjavečega jekla Prisilni obtok zraka za enakomerno porazdelitev temperature Stanje: rabljeno, delujoče

Stanje: rabljeno, Leto izdelave: 2020, Omare, 2-delne, barva c + P, v odličnem stanju, z ali brez klopi, posamezno ali vse skupaj. Dvojne omare: 67 kosov. Posamezne omare: 6 kosov. Nsdszk Dzwjpfx Altswi Klopi: 36 kosov.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Modularne omare za gojenje rastlin Fitotron®, tip HGC 1014 V, vključno z modulom za osvetlitev HQI-T in kriptonom. Temperaturno območje +5 °C - +45 °C za temperaturna testiranja. Prostornina testne komore približno 1300 l. Upravljanje Simpac. Omrežna povezava. USB-povezava. Omare za gojenje rastlin serije Fitotron® HGC temeljijo na modularni konstrukciji. Posamezne module je po potrebi mogoče dodati ali zamenjati. Tako se lahko prilagodijo različnim aplikacijam. Primerni so za rastline z visokimi zahtevami po svetlobi, kot so pšenica, koruza, bombaž, riž in rastline C4. Osvetlitev HQI-BT-400 W/D in 100 W, Temperaturno območje +5 °C do +45 °C. Časovna odstopanje temperature ± 0,5 K. Območje vlažnosti 40 % do 95 %. Območje rosišča +4 °C do +35 °C. Nodpfozpv Iaex Altswi Časovno odstopanje vlažnosti ± 3 do 5 % relativne vlažnosti. Dovod svežega zraka do 7,5 m³/h. Poraba električne energije brez dovoda svežega zraka pri 25 °C / 75 % relativne vlažnosti približno 0,8 kW. Parametri za klimatske teste z obsevanjem: Temperaturno območje +10 °C do +45 °C pri prižgani svetlobi. Časovno odstopanje temperature ± 0,5 K. Območje vlažnosti 40 % do 95 %. Območje rosišča +4 °C do +35 °C. Časovno odstopanje vlažnosti ± 3 do 5 % relativne vlažnosti. Sistem za vlaženje in razvlaževanje, testna komora iz nerjavečega jekla. Notranje mere: višina 1400 mm, globina 750 mm, širina 1270 mm. Zunanje mere: višina 1985 mm, globina 980 mm, širina 2320 mm. Zunanje mere z modulom za osvetlitev: višina 2450 mm. 1 vrata z opazovalnim oknom. Vmesnik za priključitev računalnika. Priključek 3/N/PE 400 V ±10 % 50 Hz. Označitev CE, mobilna, zelo dobro stanje. Prehod za cevi, premer 50 mm. Zračno hlajenje. Hladilno sredstvo R404A. Teža približno 480 kg + 130 kg (modul za osvetlitev). Ta omara je na voljo za prodajo v štirih izvodih. Za dodatna vprašanja nas kontaktirajte.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0329, stiskalna sila: 350 t, Hidrobrasil Four-Column Press – 350 t – 3,610 × 1,600 mm – Stroke 900 mm For sale is a hydraulic four-column press from manufacturer Hidrobrasil, delivering a pressing force of 350 t. This machine is engineered for continuous operation in industrial production processes, excelling with high traverse speeds, large clamping areas, and a powerful hydraulic system. Thanks to modern control technology and a spacious working area, it is ideally suited for demanding forming and series production applications. ===== Technical Data & Information: Hydraulic Four-Column Press – 350 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Design: Hydraulic column press - Machine type: Production press - Pressing force: 350 t - Machine weight: approx. 60 t - Dimensions (L × W × H): 2,660 × 5,400 × 5,700 mm ==== Working Area - Pass-through width: 3,000 mm Nwodpsfxygzjfx Altei - Max. working height: 1,700 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Table size: 3,610 × 1,600 mm - Ram size: 3,610 × 1,600 mm ==== Speeds - Approach speed: 230 mm/s - Return speed: 170 mm/s - Rapid traverse: 200 mm/s - Pressing speed: 21 mm/s ==== Hydraulics & Drive - Total connected load: 75 kW - Return force: 35 t - Oil tank capacity: 2,000 l - Oil cooling: electric, max. 3 kW ==== Control & Electrification - Control system: Siemens S7-1500 - Monitor: WEG, 12" ===== Forming technology, series production, large-part machining, deep drawing, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your application requirements? Contact us for a personalized offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), comply with EC standards and EU safety regulations. Additionally, our presses surpass both Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these. Our core strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic system, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0116 - Rev.00, stiskalna sila: 110 t, Hidrobrasil Four-Column Hydraulic Press – 110 t – 1,730 × 1,100 mm – Stroke 1,500 mm For sale is a hydraulic four-column press from Hidrobrasil, offering a pressing force of 110 t. This machine is designed for versatile production and forming processes, featuring a large installation height, high travel speed, as well as a stable and precise construction. Ideal for operations requiring large tools and variable process requirements. ==== Technical Data & Information: Hydraulic Four-Column Press – 110 t Nwedpfx Alsdxvflstoi ==== General Specifications - Manufacturer: Hidrobrasil - Model: Four-Column Press - Type: Hydraulic Column Press - Machine Designation: Production Press - Pressing force: 110 t - Machine weight: approx. 12 t - Dimensions (L × W × H): approx. 2,300 × 2,090 × 4,200 mm - Noise level: max. 67 dB ==== Working Area - Passage width: 1,300 mm - Max. working height: 1,500 mm - Stroke: 1,500 mm - Table height above floor: approx. 700 mm ==== Table & Ram - Table plate: 1,730 × 1,100 mm - Ram plate: 1,730 × 1,100 mm - Clamping plate thickness: 100 mm - Ram plate thickness: 100 mm - Column diameter: 140 mm ==== Speeds - Approach speed: up to 300 mm/s - Pressing speed: 15 mm/s ==== Hydraulics & Drive - Motor power: 18 kW - Return force: 11 t - Oil tank capacity: 150 l ==== Control & Electrical - Control: Siemens S7-1200 ==== Design & Execution - Machine body: RAL 7035 (Light Grey) - Moving parts: RAL 2009 (Orange) - Components: RAL 7021 (Dark Grey) - Enclosure/guard rail: RAL 1021 (Yellow) ===== Forming technology, series production, pressing processes, manufacturing, large part machining Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery regulations and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they comply in all aspects with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core competencies include special purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: novo, številka stroja/vozila: DF0279, stiskalna sila: 1.000 t, Hidrobrasil Four-Column Hydraulic Press – 1,000 t – 1,500 × 2,250 mm – Stroke 800 mm Nedpfxefxyiys Altewi For sale is a hydraulic four-column press manufactured by Hidrobrasil, offering a press force of 1,000 t. Designed for heavy-duty industrial applications and high-load forming processes, this machine delivers reliable long-term performance thanks to its robust construction, high return force, and powerful hydraulics. Ideal for large-part processing and demanding series production. ==== Technical Data & Information: Hydraulic Four-Column Press – 1,000 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Design: Hydraulic column press - Machine type: Production press - Press force: 1,000 t - Machine weight: approx. 68 t - Dimensions (L × W × H): 3,850 × 2,900 × 6,000 mm ==== Working Area - Clear width: 1,500 mm - Max. working height: 1,000 mm - Stroke: 800 mm - Table height above floor: approx. 1,300 mm ==== Table & Ram - Table size: 1,500 × 2,250 mm - Ram size: 1,500 × 2,250 mm ==== Speeds - Approach speed: 200 mm/s - Return speed: 200 mm/s - Rapid traverse: 200 mm/s - Pressing speed: 10 mm/s ==== Hydraulics & Drive - Total power requirement: 91 kW - Return force: 100 t - Oil tank capacity: 1,200 l - Oil cooling: electric, max. 1.5 kW ==== Controls & Electrical - Monitor: WEG, 12" ===== Heavy-duty forming, large-part processing, series production, industrial press, high-load applications Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these requirements. Our core competency lies in custom machine construction and press automation. We offer tailored hydraulic presses at surprisingly competitive prices. Only high-quality components from leading European manufacturers are used in the hydraulic systems of our presses.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0287, stiskalna sila: 25 t, Assembly Press – Manufacturer: Hidrobrasil – 25 t Laboratory Press with Sliding Table – Table 1000 × 800 mm Nwodjfxyikopfx Altoi For sale is a hydraulic assembly and disassembly press manufactured by Hidrobrasil, offering a pressing capacity of 25 t. The machine is equipped with a sliding table and an additional mounting table, making it ideally suited for precise assembly, disassembly, and inspection processes in workshops, laboratories, and production environments. ===== Technical Data & Information: Hydraulic Assembly Press – 25 t – Sliding Table ==== General Specifications - Manufacturer: Hidrobrasil - Model: Assembly Press / Laboratory Press - Design: Single-column press with sliding table - Pressing Force: 25 t - Machine Weight: approx. 4 t - Dimensions (L × W × H): approx. 2,054 × 2,200 × 3,126 mm ==== Working Area - Pass-through Width: 1,000 mm - Stroke: 800 mm - Max. Working Height: 800 mm - Table Height: approx. 850 mm ==== Table & Ram - Table Plate: 1,000 × 800 mm - Ram Plate: 400 × 400 mm - Ram Thickness: 122 mm - Table Opening: 650 × 150 mm - Auxiliary Mounting Table: 1,000 × 800 mm (fitted to the left) - Steel Plate on Rollers: 600 × 400 × 15 mm ==== Guide & Construction - Ram Guidance: 4 chromed linear guides Ø 50 mm - Guide Type: Bronze guides ==== Speeds - Approach Speed: up to 80 mm/s - Pressing Speed: 10 mm/s - Rapid Traverse: 80 mm/s ==== Hydraulics - Motor Power: 5 kW - Retraction Force: 2 t - Oil Tank Volume: 200 l ==== Control & Operation - Control System: Siemens S7-1200 - Monitor: Siemens, 10" - Operation: Precise control for assembly and disassembly processes ==== Safety - Light Barriers: Schmersal, 1,800 mm above floor ===== Assembly work, disassembly work, inspection operations, laboratory applications, pressing-in operations, maintenance, and servicing Assembly Press, Laboratory Press, Hydraulic Press, Single-column Press, Sliding Table Press, Industrial Press, Tooling Press, Tryout Press, Tool Try Out Press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these regulations. Our core competence lies in special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2019, stiskalna sila: 250 t, Hidrobrasil Four-Column Hydraulic Press – 250 t – 3,090 × 1,500 mm – Stroke 500 mm For sale is a hydraulic four-column press from the manufacturer Hidrobrasil with a pressing force of 250 t. This machine is designed for continuous operation in industrial production processes and offers a powerful and efficient solution for demanding forming and pressing applications, due to its high operating speeds, generous clamping surfaces, and extensive safety and energy-saving features. ===== Technical Specifications + Information: Hydraulic Four-Column Press – 250 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Design: Hydraulic column press - Machine Type: Production press - Pressing force: 250 t (at 220 bar) - Machine weight: approx. 39 t - Dimensions (L × W × H): 2,720 × 3,750 × 4,350 mm - Noise level: max. 75 dB ==== Working Area - Passage width: 2,500 mm - Max. working height: 800 mm - Stroke: 500 mm - Table height above floor: approx. 1,000 mm ==== Table & Ram - Table size: 3,090 × 1,500 mm - Ram size: 3,090 × 1,500 mm ==== Speeds - Approach speed: 400 mm/s - Return speed: 400 mm/s - Rapid traverse: 400 mm/s - Pressing speed: 50 mm/s (at 125 t) ==== Hydraulics & Drive - Total power requirement: 60 kW - Retraction force: 25 t - Pump capacity: max. 176 l/min - Oil tank volume: 1,500 l - Oil cooling: electric, max. 3 kW - Recommended oil: ISO VG 46 - Hydraulic components: Bosch Rexroth / Parker / Hydac ==== Control & Electrical System - Control: Siemens - Monitor: Omron, 12" - Control cabinet with approx. 40% reserve capacity - Components in control cabinet: Schneider ==== Equipment & Special Features - Vibration damping plates (4 × 450 × 450 × 85 mm) - Roller loading bridges (2 × 1,500 mm, removable) - Automatic oil cooling system (activates at 40°C) - Separate filter circuit (1.5 kW continuous operation) - Energy-saving function for the main pump (approx. 2 kW in standby) - Oil collection tray for hydraulic components - Zinc-plated or galvanized bolts Njdpfx Alod Nq Idjtowi ==== Safety & Monitoring - Safety technology from Pilz - Light curtains from Pilz - Parallelism monitoring of cylinders (Balluff & SICK measuring systems) - Precision control of cylinders via fast-action valves - Parallelism accuracy < 1 mm across the entire width ===== Forming technology, series production, large part machining, pressing processes, industrial production Hydraulic press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety directive NR 12, which is based on these standards. Our major strengths are special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we use mainly components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 20 t, Hidrobrasil Double-Column Hydraulic Press – 20 t – 1,400 × 1,100 mm – Stroke 300 mm For sale is a hydraulic double-column press by Hidrobrasil with a pressing force of 20 t. This machine is designed for small series production and assembly applications, featuring easy operation, robust construction, and precisely adjustable pressing parameters. Thanks to its compact design and reliable hydraulic system, it is ideally suited for a wide range of industrial applications. ==== Technical Data & Information: Hydraulic Double-Column Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Design: Hydraulic double-column press - Machine description: Production press - Pressing force: 20 t (200 kN) - Machine weight: approx. 3 t - Overall height: approx. 2,800 mm - Number of operator sides: 1 ==== Working Area - Max. opening width: 500 mm - Stroke: 300 mm - Table height from floor: approx. 900 mm - Table cut-out: 1,100 × 850 mm ==== Table & Slide - Table size between columns: 1,400 × 1,100 mm - Slide size between columns: 1,400 × 1,100 mm ==== Speeds - Closing speed: up to 10 mm/s - Opening speed: up to 30 mm/s - Pressing speed: approx. 9 mm/s ==== Hydraulics & Drive - Operating pressure: max. 280 bar - Main pump: Bosch Rexroth / Parker, approx. 35 l/min - Oil tank volume: approx. 150 l - Recirculation pump for cooling: approx. 6.5 l/min - Motor power: 3 kW - Total connected load: approx. 5 kW ==== Control & Operation - Pressure adjustment: 4–20 t via rotary knob - Stroke adjustable via slide control - Manual lubrication via grease nipples ==== Features - UKF recirculating cooling and filtration (electric cooling) - Twin cylinder system - Heavy-duty design for production operation ===== Njdpfxohmbhqe Altswi Assembly work, insert work, small series production, forming technology, production processes Hydraulic press, hydraulic press, double-column press, production press, insert press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured in compliance with German machinery guidelines, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses also exceed Canadian and European safety requirements by fully meeting all aspects of the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is special purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 400 t, Hidrobrasil Four-Column Hydraulic Press – 400 t – 2,700 × 1,700 mm – Stroke 1,000 mm For sale is a hydraulic four-column press manufactured by Hidrobrasil, offering a pressing force of 400 t. This machine is designed for continuous shift operations and, thanks to its powerful twin-cylinder design with piston accumulator, provides exceptional dynamics combined with efficient energy consumption. Comprehensive automation and adjustment options make this press an ideal solution for demanding production and forming processes. ===== Technical Data & Details: Hydraulic Four-Column Press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-column press - Design: Hydraulic column press - Machine type: Production press - Pressing force: 400 t (4,000 kN) - Machine weight: approx. 52 t - Overall height: approx. 5,700 mm - Number of operator sides: 2 ==== Working Area - Max. opening: 1,600 mm - Stroke: 1,000 mm - Min. opening: 600 mm - Table height above floor: 820 mm - Minimum tool height: 600 mm ==== Table & Ram - Table size (clamping area): 2,700 × 1,700 mm - Total table size: 3,400 × 1,700 mm - Ram size: 3,400 × 1,700 mm - Column diameter: 250 mm - T-slots: 28 mm – customer-specific - Table top: precision milled ==== Speeds - Closing speed: 100–450 mm/s - Opening speed: 50–250 mm/s - Press speed: 5–60 mm/s ==== Hydraulics & Drive - Hydraulic components: Bosch Rexroth / Parker / HAWE - Main motor power: 90 kW - Piston accumulator with approx. 4 nitrogen bottles - Circulation oil cooling (adjustable) - Pressure holding valve: 0–600 sec - Pressure build-up time: max. 2 sec - Pressure accuracy: ± 5 bar ==== Control & Operation - Control: Siemens S7-1500 - Touchscreen: 15" Siemens - Operator panel: swiveling - Operating modes: setup, single stroke, continuous stroke, programmable mode - Pressure adjustment: 50–400 t via touchscreen - Stroke limitation by pressure or position - Free positioning of ram - Siemens remote service unit (SECOMEA Ethernet) ==== Equipment - Automatic lubrication (adjustable) - Oil temperature monitoring (adjustable) - KEYENCE light curtains (14 mm) front and rear - Safety components from SICK - Side-monitored safety doors (1,200 × 1,000 mm) - Two-hand operation on both sides - Preparation for automatic material feeding - RITTAL switch cabinet (can be placed up to 20 m away) Nsdpfxog Iihwo Altewi - Stress-relieved components (table, ram, press head) - Machine body primed and painted ==== Accuracy - Parallelism deviation: ± 0.1 mm - Deflection: ≤ 0.17 mm/m ===== Forming technology, deep drawing, pressing processes, series production, large-part manufacturing, automated production Hydraulic press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in compliance with German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards as they fully comply with all aspects of the national Brazilian safety directive NR 12, which builds upon these standards.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.000 mm, dolžina mize: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) from Hidrobrasil with an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series production applications; it features a compact design, stable guidance, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical Data & Information: Hydraulic Double Column Press – 40 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Machine type: Small series press / Calibration press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working Area - Max. Tool Height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Ram - Table size: 1,000 × 600 mm - Ram area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and drilling pattern: as per customer request ==== Speeds - Idle speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic block and valves: Duplomatic - Air and oil filter: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety Njdpfoxrby Hsx Altowi - Control via sensors - Safety light sensors - Safety guard (door) at rear side - Interior workspace lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Cooling: air cooling - Internal lighting: available - Mode selector switch: lockable ===== Calibration, assembly work, small series production, metal forming, flexible manufacturing Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German machine guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety directive NR 12, which builds upon these standards. Our core strengths are special purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic system, we primarily use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, stiskalna sila: 400 t, Hidrobrasil Double-Column Hydraulic Press – 400 t – 1,500 × 1,500 mm – Sliding Table Press with Ejector For sale is a double-column hydraulic press with sliding table from Hidrobrasil, providing a press force of 400 t. This machine is specifically designed for demanding forming and pressing operations. Its movable table and integrated ejector allow for high flexibility in tool handling. Equipped with modern controls, high precision, and extensive safety features, it is ideally suited for industrial series production and complex applications. ===== Technical Data & Information: Hydraulic Double-Column Press – Sliding Table Press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Machine designation: Sliding Table Press - Design type: Double-column - Press force: 400 t (4,000 kN) - Machine weight: approx. 28 t - Dimensions (L × W): approx. 3,800 × 4,475 mm - Overall height: approx. 4,300 mm - Number of operator sides: 1 ==== Working Area - Max. opening: 800 mm - Stroke: 800 mm - Table height above floor: 1,100 mm - Minimum hall height: 5,500 mm - Parallelism tolerance: ± 0.1 mm ==== Table & Ram - Table size: 1,500 × 1,500 mm - Ram size: approx. 1,600 × 1,500 mm - Table plate: machined flat with T-slots (DIN 650-22) - Table ejector: 20 t / 350 mm stroke - Ejector moves out with the table ==== Speeds - Closing speed: up to 100 mm/sec - Opening speed: up to 100 mm/sec - Pressing speed: 3–10 mm/sec ==== Hydraulics & Power - Operating pressure: max. 300 bar - Main pump: Bosch Rexroth axial piston pump (approx. 145 l/min) - Auxiliary pump: Bosch Rexroth gear pump (10 l/min) - Pressure hold time: up to 300 sec - Main motor: 40 kW - Oil capacity: approx. 1,000 l - Oil temperature monitoring: warning at 55 °C, shutdown at 60 °C ==== Controls & Operation - Control system: Siemens S7-1200 - Touchscreen: 9" monitor - Remote maintenance: SECOMEA Ethernet Nodpfx Aloph Uk Netswi - Operating modes: setup, single stroke, automatic/cycle - Pressure setting: 60–400 t via touchscreen - Stroke limitation by pressure or position - Free ram positioning - Swivel-mounted control panel - Two-hand operation with function selection ==== Safety & Equipment - Light barriers: SICK / PILZ (14 mm, up to 1,800 mm height) - Hydraulic and mechanical ram safety locks - Automatic lubrication - Recirculating oil cooling - Side doors with viewing windows (1,000 × 800 mm) ==== Construction & Features - Precise deflection: ≤ 0.2 mm/m - Robust construction for continuous operation - Suitable for demanding forming and series production ===== Forming, Series Production, Toolmaking, Pressing, Sheet Metal Processing Hydraulic press, double-column press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our strength is custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are predominantly equipped with hydraulic components from leading European manufacturers.

Stanje: novo, stiskalna sila: 100 t, Hidrobrasil Four-Column Press – 100 t – 1,090 × 600 mm – Powder Press with Ejector For sale is a hydraulic four-column press (powder press) manufactured by Hidrobrasil with a pressing force of 100 t. This machine is specifically designed for powder pressing and compaction processes, offering high positioning accuracy and a powerful ejector system. Thanks to precise control and robust construction, it is ideally suited for industrial series production of molded parts. ==== Technical Data & Information: Hydraulic Four-Column Press – Powder Press – 100 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Machine designation: Powder Press - Design: Four-column press - Pressing force: 100 t - Machine weight: approx. 6 t - Dimensions (L × W × H): approx. 3,000 × 1,210 × 3,100 mm - Motor power: 22 kW ==== Working Area - Passage width: 700 mm - Stroke: 450 mm - Max. working height: 850 mm - Table height above floor: approx. 800 mm - Positioning accuracy: 0.1 mm ==== Table & Ram - Table plate: 1,090 × 600 mm - Ram plate: 1,090 × 600 mm - Retraction force: 10 t ==== Speeds - Forward speed: 1–100 mm/sec - Return speed: 1–100 mm/sec - Working speed: 1–10 mm/sec ==== Ejector System - Ejector diameter: 100 mm - Ejector stroke: 210 mm - Ejector force: 100 t - Number of ejector pins: 1 piece ==== Hydraulics & Performance - Oil tank: 300 l - Oil cooling (electric): 1.5 kW (max) ==== Control & Operation - Monitor: WEG 15" - Precise control for repeatable press cycles Nwedofxyhqopfx Altji ==== Options (on request) - Hydraulic system and tank mounted on top of the press - Surrounding maintenance platform - Siemens S7-1500 control system - Oil collection tray - Heating circuit connections (3 units) with monitoring and time settings ===== Powder presses, compaction, series production, sintering technology, molded part manufacturing Hydraulic press, hydraulic powder press, four-column press, industrial press, production press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our key strength lies in custom machine construction and press automation. We offer tailored hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, stiskalna sila: 135 t, Hidrobrasil Laboratory Press – 10–135 t – 1,100 × 650 mm – with Auxiliary Cylinder For sale is a hydraulic laboratory and assembly press from Hidrobrasil with a main cylinder providing 10 to 135 t of pressing force and an integrated auxiliary cylinder allowing sensitive operations up to 7 t. This machine is ideally suited for precise assembly, testing, and pressing applications requiring both high force and finely controllable pressure. ==== Technical Data & Information: Hydraulic Laboratory Press – 10–135 t ==== General Information - Manufacturer: Hidrobrasil - Model: Laboratory Press - Machine designation: Assembly press - Design: Hydraulic press with auxiliary cylinder - Pressing force main cylinder: 10–135 t - Pressing force auxiliary cylinder: 1.5–7 t - Machine weight: approx. 2.3 t - Overall height: 2,900 mm ==== Working Area - Table size: 1,100 × 650 × 120 mm - Max. open height: 800 mm - Table height: max. 900 mm - Stroke / travel: 400 mm ==== Speeds - Rapid traverse: 2–10 mm/sec - Pressing speed: 2 mm/sec ==== Hydraulics & Drive - Tank capacity: 200 l - Pump capacity: 60 l/min - Motor power: 5 kW ==== Control & Safety - Control system: Siemens S7-1200 Nwjdpfjigg E Hsx Altsi - Safety technology: SICK - Remote maintenance module: available ==== Applications & Features - Combination of high pressing force and sensitive auxiliary cylinder - Ideal for assembly, testing, and laboratory applications - Precision control for delicate components ===== Assembly, test applications, laboratory operation, fine pressing, press-fit operations Hydraulic press, laboratory press, assembly press, test stand press, press-fit press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured in compliance with German machine guidelines, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements as they fully meet Brazilian national safety standard NR 12, which builds on these regulations. Our core competency lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0362, stiskalna sila: 250 t, Hidrobrasil Four-Column Press – 250 t – 1,800 × 1,600 mm – Sliding Table For sale is a hydraulic four-column press from Hidrobrasil with 250 t pressing force and integrated sliding table. This machine is ideally suited for assembly, forming, and series production processes requiring comfortable workpiece access and high parallelism accuracy. Thanks to extensive features such as oil cooling, energy-saving mode, and optional safety technology, it is designed for continuous industrial operation. ===== Technical Data & Information: Hydraulic Four-Column Press – 250 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Four-Column Press - Machine Type: Sliding Table Press - Design: Four-Column Press - Pressing Force: 250 t - Machine Weight: approx. 24 t - Total Power Requirement: 22 kW - Dimensions (L × W × H): approx. 3,390 × 3,400 × 3,800 mm - Column Diameter: 160 mm ==== Working Area - Pass-through Width: 1,800 mm - Max. Working Height: 800 mm - Stroke: 600 mm ==== Table & Ram - Table Size: 1,800 × 1,600 mm - Ram Size: 2,350 × 1,600 mm - Table Height above Floor: approx. 900 mm - Max. Table Load: 5 t - Hydraulic Table Shift: 25 mm/sec - Return Force: 25 t ==== Speeds - Approach Speed: 10 mm/sec - Pressing Speed: 10 mm/sec - Return Speed: 25 mm/sec - Rapid Traverse: 10 mm/sec ==== Hydraulics & Features - Oil Tank: 600 l - Recommended Oil: ISO VG 46 / 10 µ - Electric Oil Cooling: 1.5 kW (max) Njdpfx Alofxyinotjwi - Separate cooling circuit with automatic activation - Continuous filter circuit (approx. 1.5 kW power consumption) - Energy-saving mode for main pump ==== Controls & Safety - Monitor: Siemens, 10 inch - Safety Options: SICK / Pilz / Schmersal - Parallelism monitoring via displacement measuring systems (Balluff / SICK) - Control cabinet with approx. 40% reserve capacity ==== Construction & Additional Features - Vibration damper plates (4 × 450 × 450 × 85 mm) - Galvanized or electroplated connectors - Oil drip tray for maintenance - Noise emission: max. 67 dB ==== Accessories - 2 roller loading bridges (each 1,500 mm, removable) ===== Assembly, Forming, Series Production, Sliding Table Applications, Metalworking Hydraulic Press, Four-Column Press, Sliding Table Press, Production Press, Industrial Press, Forming Press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery guidelines as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they also comply fully with the Brazilian national safety standard NR 12, which builds on these regulations. Our core strength is custom machine construction and press automation. We offer made-to-order hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are equipped primarily with components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 30 t, širina mize: 600 mm, dolžina mize: 600 mm, skupna dolžina: 1.869 mm, skupna širina: 850 mm, skupna višina: 2.620 mm, skupna masa: 2.900 kg, Hidrobrasil C-Frame Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a single-column hydraulic press (C-frame press) by Hidrobrasil, featuring 30 t press force and a compact design. The machine offers a table size of 600 × 600 mm and is ideally suited for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. ===== Technical Specifications + Information: Hydraulic C-Frame Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-column press - Design: C-frame press - Machine designation: Assembly press - Press force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table dimensions: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downstroke speed: 10 mm/sec Nedpfjvhcykex Altowi - Return speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly work, pressing work, straightening, workshop applications, small batch production Hydraulic press, hydraulic single-column press, C-frame press, assembly press, industrial press

Stanje: novo, Leto izdelave: 2021, stiskalna sila: 10 t, Single-column press – Manufacturer Hidrobrasil – 10 t Assembly Press – Table 600 × 300 mm For sale is a compact hydraulic single-column press (C-frame press) from Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous multi-shift operation and is ideally suited for assembly, press-fitting, and light forming tasks in workshops and production. Nedshma Smjpfx Altewi ===== Technical specifications + Information: Hydraulic Single-Column Press – 10 t ==== General information - Manufacturer: Hidrobrasil - Model: Single-column press / Assembly press - Design: C-frame press / Single-column press - Pressing force: max. 10 t (100 kN) - Pressure range: 0.5 – 10 t adjustable - Machine weight: approx. 1.6 t - Dimensions (L × W × H): approx. 1,100 × 600 × 2,850 mm - Table height: 850 mm - Control sides: 1 ==== Working area - Max. opening width: 800 mm - Stroke: 500 mm - Minimum opening: 300 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) - Oil temperature: max. 55 °C - Ambient temperature: max. 40 °C ==== Drive & Electrical - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary knob - Cable remote control for up and down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine frame powder-coated / double painted ==== Design & Safety - Design as oil hydraulic single-column press - Complies with current accident-prevention and EU guidelines ===== Assembly work, press-fitting, small batch production, workshop applications, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, press-fit press, industrial press, die tryout press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our core strength lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2021, stiskalna sila: 10 t, Single-column press – Manufacturer: Hidrobrasil – 10 t assembly press – Table: 600 × 300 mm For sale: a hydraulic single-column press (C-frame) by Hidrobrasil, offering a pressing force of up to 10 t. The machine is designed for continuous shift operation and stands out for its robust construction, reliable hydraulic components, and versatile application in assembly and pressing processes. ==== Technical Details & Information: Hydraulic Single-Column Press – 10 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Single-column press / assembly press - Design: C-frame press / single-column press - Pressing force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Operator sides: 1 ==== Working Area - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) Njdohaqygepfx Altowi ==== Drive & Electrical - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Features & Operation - Pressure adjustment via rotary knob (0.5 – 10 t) - Cable remote control for up & down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder coated / double lacquered ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Construction & Safety - Robust machine body according to DIN 8651 - Cylinder induction hardened and chrome-plated - CE certificate available - Documentation in German - Low-maintenance and reliable - Complies with current EU directives ===== Assembly work, pressing applications, small batch production, workshop use, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die-tuning press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength lies in custom machine building and press automation. We supply tailored hydraulic presses at surprisingly competitive prices. Our presses are equipped mainly with components from leading European manufacturers.

Stanje: zelo dobro (rabljeno), Weiss WT-1300/70/15 temperaturna preizkusna komora Proizvajalec: Weiss Umwelttechnik GmbH Tip: WT-1300/70/15 Nsdpsza Dv Iofx Altewi Vodno hlajena temperaturna preizkusna komora z upravljanjem preko zaslona na dotik za temperaturna testiranja v raziskavah, razvoju, kontroli kakovosti ter industriji. Tehnični podatki Temperaturno območje: -70 °C do +180 °C Prostornina preizkusne komore: pribl. 1340 litrov Hitrost spreminjanja temperature - gretje: 15 K/min Hitrost spreminjanja temperature - hlajenje: 10 K/min Časovna temperaturna odstopanja: ± 0,1 do ± 0,5 K Prostorska temperaturna homogenost: ± 0,5 do ± 2 K Dimenzije preizkusne komore: Višina 920 mm Širina 1100 mm Globina 1330 mm Zunanje dimenzije: Višina pribl. 2050 mm Širina pribl. 1300 mm Globina pribl. 3200 mm Dovoljena obremenitev preizkusnega blaga: Tla preizkusne komore 150 kg Vstavljiva rešetka 50 kg Električni podatki Nazivna napetost: 3/N/PE AC 400 V ±10 % 50 Hz Nazivni tok: 63 A Nazivna moč: 44 kW Hladilni sistem Hladilno sredstvo R404A: 14,0 kg Hladilno sredstvo R23: 5,4 kg R404A LP maks.: 18 bar R404A HP maks.: 25 bar R23 LP maks.: 19 bar R23 HP maks.: 25 bar Statični tlak: 18,5 bar Oprema Upravljanje preko zaslona na dotik Preizkusna komora iz nerjavečega jekla Več vstavnih nivojev Stranski prehod Ogrevano vratno tesnilo Vodno hlajeni hladilni agregat CEE-priključek CE-označevanje Teža: pribl. 1500 kg Stanje Rabljena naprava iz industrijske uporabe. Vizualno stanje skladno s fotografijami. Za varnost naših strank se na ponujenih klimatskih komorah vnaprej izvedejo naslednja dela: 1. Preverjanje delovanja ter menjava potrebnih komponent 2. Po potrebi ponovno polnjenje s skladnim hladilnim sredstvom 3. Preizkus tesnosti z izdanim certifikatom 4. Dokumentiran testni zagon po uspešnem pregledu Obseg dobave: glejte slike Na voljo je pošiljanje ali pošiljanje s špediterjem. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatna vprašanja vam z veseljem svetujemo po telefonu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 319009702, Funkcionalnost: popolnoma funkcionalen, na voljo v kratkem roku, 12 mesecev garancije Opremljen z varnostnim sistemom za snovi, ki vsebujejo topila, v skladu s standardom DIN 1539! 3 močne predali, vsak lahko prenese obremenitev 123 kg, popolnoma izvlečni predali! - Notranje mere š x g x v: 1000 x 1000 x 1500 mm - Zunanje mere š x g x v: 1765 x 1425 x 2615 mm - Prostornina: 1500 litrov - Tmaks: 250 °C - Krmilnik JUMO Imago 500 Nedpfx Aozivl Soltswi - Odobrena količina topil pri Tmaks: 250 g = 46 g - Volumen izpustnega zraka: 6 m³/min - Dodatna oprema: 3 izvlečni rešetkasti podi, vsak pod lahko prenese obremenitev 123 kg 1 plošča za zbiranje ostankov, ki jo je mogoče izvleči na dnu, je na voljo Luknja za npr. termoelemente - Priključna moč: 26 kW - Lastna teža: 1250 kg - Vključno z dokumentacijo in izjavo CE Ponujamo tudi namestitev in zagon. Ogled je možen v našem skladišču po dogovoru. Trgujemo z novimi in rabljenimi industrijskimi pečmi. Obrnite se na nas! Peč, peči, sušilna peč, žarilna peč, ogrevalna peč, ogrevalna omara, industrijska peč, peč s kroženjem zraka, sušilnica s kroženjem zraka, predgrelna peč, ogrevalna peč, temperaturna peč, sušilna omara, komorna peč, peč za strjevanje, sušilnica s kroženjem zraka, peč s kroženjem zraka, peč za topila, komorna sušilnica, sušilnica za lak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: SN319009701, Funkcionalnost: popolnoma funkcionalen, na voljo takoj, zelo dobro stanje, 12 mesecev garancije Opremljen z varnostnim sistemom za snovi, ki vsebujejo topila, v skladu s standardom DIN 1539 -Notranje mere (š x g x v): 1000 x 1000 x 1500 mm Nsdpfx Alozivl Ejtswi -Zunanje mere (š x g x v): 1765 x 1425 x 2615 mm -Prostornina: 1500 litrov -Tmax 250 °C -Krmilnik JUMO Imago 500 -Dovoljena količina topila pri Tmax: 250 g / 46 g -Pretok izpušnega zraka: 6 m³/min -Dodatna oprema: 1 Prehod, npr. za termoelemente Vodila za vpeljavo -Ustrezni viličarji za nakladanje in plošče na voljo na zahtevo! -Priključna moč: 26 kW -Lastna teža: 1250 kg -Vključno z dokumentacijo in izjavo o skladnosti CE Ponujamo tudi montažo in zagon. Ogled v našem skladišču je možen po dogovoru. Prodajamo nove in rabljene industrijske peči. Obrnite se na nas! Peč, peči, sušilna peč, žgana peč, ogrevalna peč, ogrevalni omara, industrijska peč, peč s kroženjem zraka, sušilna komora s kroženjem zraka, predgretna peč, ogrevalna peč, temperaturna peč, sušilna omara, komorna peč, peč za enkratno obdelavo, sušilna komora s kroženjem zraka, peč s kroženjem zraka, peč za topila, komorna sušilnica, sušilnica za lak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 319009703, Funkcionalnost: popolnoma funkcionalen, na voljo v kratkem času, 12 mesecev garancije Opremljen z varnostnim sistemom za snovi, ki vsebujejo topila, v skladu s standardom DIN 1539! 3 močne predali, vsak obremenljiv do 123 kg, popolnoma izvlečni! -Notranje mere (š x g x v): 1000 x 1000 x 1500 mm -Zunanje mere (š x g x v): 1765 x 1425 x 2615 mm -Prostornina: 1500 litrov -Tmax: 250 °C -Krmilnik: JUMO Imago 500 -Dovoljena količina topila pri Tmax: 250 g / 46 g Nwedszivlropfx Altoi -Pretok izpušnega zraka: 6 m³/min -Dodatna oprema: 3 izvlečne rešetkaste police, močne, obremenljive do največ 123 kg 1 plošča za zbiranje opilkov, izvlečna, nameščena na dnu 1 odprtina, npr. za termoelemente -Priključna moč: 26 kW -Lastna teža: 1250 kg -Vključno z dokumentacijo in izjavo CE Ponujamo tudi namestitev in zagon. Ogled je možen v našem skladišču po dogovoru. Prodajamo nove in rabljene industrijske peči. Obrnite se na nas! Peč, peči, sušilna peč, žarilna peč, grelna peč, grelna omara, industrijska peč, peč s kroženjem zraka, sušilni stroj s kroženjem zraka, predgrelna peč, ogrevalna peč, temperirna peč, sušilna omara, komorna peč, peč za vžig, sušilni stroj s kroženjem zraka, peč s kroženjem zraka, peč za topila, komorni sušilnik, sušilnica za barve.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based materials in accordance with DIN 1539. Matching feed trolleys available in stock (see photos). Please contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570/ 50 programs with 40 segments each, freely programmable - NtLog for controller: data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air volume flow: 390 m³/h - Additional equipment: Guide rails - Connected load: 39 kW - Net weight: 1150 kg - Incl. documentation, CE declaration Installation and commissioning available on request. Inspection possible at our warehouse by appointment. We offer new and used industrial ovens. Contact us! Furnace, ovens, drying oven, kiln, heating oven, thermal cabinet, industrial oven, circulating air oven, convection chamber dryer, Nwsdpfx Aol Dw T Asltei annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, curing oven, circulating air drying cabinet, convection oven, solvent oven, chamber dryer, paint dryer.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Nwsdeziizyepfx Altei Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.