Geneaid Sistem Za Ekstrakcijo Nukleinskih Kislin nakup rabljenega (85.347)

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter Nedpfov Tm Aysx Ah Uowg The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Leto izdelave: 2006, stanje: kot nova (razstavni stroj), številka stroja/vozila: 31331, DISTILATOR DNP 2000 SEMIAUTOMAT – SISTEM DE DISTILARE CU ABURI PENTRU PROTEINĂ-AZOT Raypa DNP-2000 An fabricație: 2006, neutilizat Distilator pentru proteină-azot bazat pe metoda Kjeldahl. Automat, pentru analiza azotului proteic din probe de materii prime sau materiale procesate, destinat industriei alimentare. Disponibile metode specifice. Rezultatele sunt conforme cu reglementările: EN/ISO, AOAC. DISTILATOR DE AZOT – DNP-2000 Caracteristici • Douăzeci de programe liber configurabile de utilizator. • Sistemul dispune suplimentar de trei programe fixe: – Test cu sulfat de amoniu. – Preîncălzirea sistemului. – Spălarea recipientului de deșeuri. Avantaje • Kit opțional pentru titrare automată. • Aspirare eșantion. • 20 programe utilizator. • Calibrare pompă de către utilizator. • Generator de abur cu control nivel apă. • Pompă acid boric. • Senzor ușă deschisă. Njdpfx Ahsfiliwo Ujwg Performanțe • Domeniu de măsurare: 0,1–200 mg N. • Randament recuperare azot: >99,5%. • Reproductibilitate: ±1%. • Timp distilare: 4 min/100 ml. • Consum apă de răcire: 1,2 l/min. • Putere: 2000 W (100%). Parametri și valori programabile • Apă pentru diluție: 0–240 ml. • Soluție OHNa: 0–240 ml. • Soluție H3BO3: 0–240 ml. • Timp reacție (întârziere): 0–30 min. • Timp distilare: 0–30 min sau nelimitat. • Reglarea puterii aburului: 30–100%. Siguranță • Detecție ușă închisă. • Detecție tub digestie. • Termostat supratemperatură. • Utilizare în industria alimentară și oenologie (vinificație). • Documentație: manual de instrucțiuni + garnituri montaj și mufă. • Pentru companiile din România este posibilă vânzarea în rate. Preț: 3.600 Euro + TVA Ex Works încărcat FCA: Oradea/România Ne rezervăm dreptul la erori, modificări și vânzare intermediară. Vorbit cu: vorbim engleză/Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim româna.

Stanje: rabljeno, 1 kos sistem za povezovanje CNP CANAPA 35 Nwsdpsy Tkiijfx Ah Ueg 220V Barva: kot prikazano, po slikah in ogledu Dimenzije D/Š/V: 90x60x76cm Stanje: rabljeno

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. Nodjy Aagiopfx Ah Uswg ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah

Stanje: rabljeno, Izvlečevanje čistega zraka HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -ge Filtiranje zraka preko filtrskih vreč, motorizirano čiščenje, preizkušeno na prah, Nodpjy R Upzofx Ah Uewg premični zbirni zabojnik ----- Tehnični podatki ----- Sesalni priključek Ø: 250 mm, Nazivni volumenski pretok: 4.241 m³/h, Minimalni volumenski pretok: 3.534 m³/h, Število vreč: 3 kosa, Motor: 4 kW, Mere (DxŠxV): 2.500x1.280x2.500 mm, Teža: 630 kg

Stanje: novo, Vacomats are mobile extraction units designed to remove large quantities of dust and chips in compact spaces. These clean air extraction systems (negative pressure), intended for indoor installation, can be used for single or multi-machine extraction, handling air volumes of up to 10,000 m³/h. Built in accordance with the latest EU standard EN 16770, they are particularly suitable for woodworking shops where special safety requirements apply due to the risk of dust explosion. They are suitable for materials classified under dust explosion class St1. Filter cleaning in the Vacomat XPe is carried out purely electro-mechanically via an efficient shaking motor, which automatically activates once all connected machines are switched off. The control is managed via voltage-free contacts relaying the operating status of the woodworking machines. Motorized shaking control is included in the scope of delivery. Delivery does not include coils. Motorized filter regeneration, mobile design, extraction port can be mounted on either the right or left side, and the unit can be height-reduced for transport. ----- Technical Data ----- Extraction connection Ø: 180 mm Nwodpfsu T Hriex Ah Ueg Airflow: 2,610 m³/h Rated airflow: 1,832 m³/h Max. negative pressure: 2,450 Pa Filter surface area: 13.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 2 Motor power: 3.0 kW Dimensions (LxWxH): 2,085 x 900 x 2,130 mm Weight: 414 kg Sound pressure level: 76 dB(A) Dust class: M Includes: integrated control cabinet

Stanje: novo, Clean Air Extraction Unit SCHUKO Vacomat 140/160 XPe - Exhibition Model - Motorized filter system, mobile, extraction port can be mounted on either the right or left side ----- Technical Data ----- Certification: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal airflow: 1,447 m³/h, Max. negative pressure: 2,200 Pa, Filter surface area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Nwedpfx Aou R Szyjh Ujg Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - New exhibition machine -

Stanje: rabljeno, Feeding Technology / Feed System / Vibratory Feeder / Sorting Unit / Bowl Feeder Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screw Technology Feed System DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The unit was used for feeding electrical connector contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed conveyor supplies the pins on demand to the bowl feeder. From the bowl feeder, the product is fed via a linear feeder to the part turner. The part turner aligns the product to the correct orientation and releases it for further processing. The unit comes from a prototype system; an external electrical control is not included and should be provided via a PLC. Without modification, suitable for automatic and correctly oriented feeding of threaded bolts up to M4 x 40, for example. The unit consists of the following components: 1 piece Belt Hopper / Feed Conveyor DEPRAG Type: B 10 Serial No.: 1178201 Order No: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Belt surface dimpled - Foldable stainless steel chute Weight: 11 kg 1 piece Bowl Feeder Vibratory Pot KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl inner height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. Nwjdpfxskpwuuj Ah Usg 1 piece DEPRAG Vibration Controller for Bowl Feeder Type: SZG Controller 6 Manufacturing No.: 35 1 piece Linear Feeder KENDRION Type: WS3B/36 Part No.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Linear Feeder Type: SZG Controller 6 Manufacturing No.: 35 1 piece FESTO Part Turner with 180° swiveling range - 1 piece FESTO Valve Block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR Base Module Type MVP12 - Complete unit mounted on a steel plate with 4 support feet Space required (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Leto izdelave: 2025, stanje: novo, Parts Cleaning Machine, Spray Cleaning System Type L122 Fully automatic hot water chamber washing machine with basket drive powered by geared motor, machine housing made of stainless steel 1.4301. Nwjdpshl Ic Rjfx Ah Uog - 2 stainless steel 3-sided nozzle systems with stainless steel flat jet nozzles - 2 stainless steel washing pumps (Manufacturer: Xylem/Lowara) - Level control as dry-running protection - 2 suction filters for pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. loading weight: 300 kg - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Electrical connection load: approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, delovna širina: 615 mm, skupna širina: 3.100 mm, skupna dolžina: 750 mm, skupna višina: 1.135 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 320 kg, dolžina rezanja (maks.): 600 mm, širina transportnega traku: 615 mm, leto zadnje generalne obnove: 2022, Linija za rezane žemljice Nsdpfx Ahovkthke Ujwg Frilado model MSA 80 Ročno polnjenje Upravljanje ene osebe Zgornja plošča iz nerjavečega jekla Priključek 400V, vtikač 16A-CEE Rabljena stroj Veliko drugih pekarskih strojev na zalogi!

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, Šivalni stroj Horizon SPF-200L+FC-200L+LC-200 (brez zbiralnika). Stroj je v originalni embalaži (popolnoma nov, nikoli uporabljen). Kot uradni prodajalec lahko zagotovimo montažo in usposabljanje. Nsdpfxjy R Ayho Ah Uowg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Nagel Foldnak 8 z 2 spenjačnimi glavami Nagel SP Plus Square Press Nwodpfxey Rr Eae Ah Uog Nagel Trimmer s trakovnim izhodom

Stanje: dober (rabljeno), Leto izdelave: 2013, Sorter for light loads, Optimus, SORTATION SYSTEM OPTISORTER HORIZONTAL, 200 trays, configured for 261 destinations – used - : Price sorter incl. control unit: ex location: €99,500 (net), including dismantling, packaging, and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control unit: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/hour Total system length: 53 m Total system width: 14 m Number of infeed stations: 1 Infeed station width: 2 m Number of trays: 200 pcs Nwsdpfjwxu A Rjx Ah Uog Usable tray size: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min: 150 / 120 / 10mm Max: 600 / 400 / 200mm Weight: min: 0.25kg / max.: 5kg No longer available: roller conveyors, pick-by-light, flap elements. At each sorting station there were two outputs, which sorted onto an upper or lower destination roller conveyor via a tilting chute. Total number of sort destinations in the system: the plant had 261 destinations. Number of destinations for special purposes (overflow, reject, etc.): 3 pcs. There is a pick-by-light system at the destination roller conveyor. This means all parts installed after tray dropping in the system flow are no longer available and are therefore not part of the sale! Condition: good Available immediately Location: Warehouse Frankenberg / Saxony Detailed description available on request in PDF (in English).

Stanje: rabljeno, številka stroja/vozila: 008597, Pozicija 1: Krožna žaga za plošče z avtomatskim podajanjem SCHELLING-VS 12 - FH6 - FH4 Nwsdpfx Asy Stvpjh Ujg Pozicija 2: Krožna žaga za plošče – podajanje spredaj SCHELLING-VS 12 - FH6 - FH4 Pozicija 3: Avtomatizirano skladišče SCHELLING-VS 12 - FH6 - FH4

Stanje: rabljeno, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging system Fan Type S 140 / 0 / S1 Serial No. Year of manufacture 12 / 2004 Nominal air flow: 1451 m³/h Negative pressure: 1398 Pa Filter area: 18 m² Extraction connection: Ø 140 mm, reduced to Ø 120 mm Air outlet: 480 x 480 mm Motor power: 1.1 kW Power supply: 400 volts, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning via shaking motor - 2 discharge pipes at the bottom for waste collection bags, each Ø 500mm reduced to Ø 300mm - Dry fire extinguishing line with connection for C-hose, fire brigade connection for filter fire - Differential pressure switch for detecting filter contamination - Without control system (no control unit included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as shown in photos: 3050 mm Required space (L x W): 1850 x 1000 mm Njdpfx Asr R Ewlsh Uowg Weight: approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust, or plastic chips.

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts Nwedpsif Sg Sefx Ah Ujg - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski zlagalnik Timme z magazinom za letve. Premični voziček s hidravlično dvižno mizo, krmiljenje Siemens S7. Dolžine do 6,0 m. Zelo malo uporabljen, na voljo zaradi prestrukturiranja. Video prikaz delovanja stroja vam lahko z veseljem pošljemo. Nodpfjy S Ucwsx Ah Uowg

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire Nwsdpjfirx Njfx Ah Usg - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Stanje: rabljeno, S to ponudbo pridobite rabljeni sistem za izdelavo brošur "Plockmatic PBM500". Predmet prodaje: 1 x Plockmatic PBM500 Stanje: Nodoudv T Rspfx Ah Uowg Ponujena naprava je rabljena in lahko kaže znake uporabe (manjše praske ali porumenelost). Naprava je bila preizkušena za funkcionalnost. Pakiranje in dostava: Napravo si lahko ogledate v času našega poslovanja. Za ogled se prosimo predhodno dogovorite! Pomorsko varno pakiranje in svetovna dostava sta na zahtevo možna! Pred odpremo ali prevzemom bo opravljen in posnet funkcionalni test. Za dodatne informacije se lahko tudi osebno obrnete na nas.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, trajanje garancije: 6 meseci, skupna širina: 505 mm, skupna dolžina: 1.010 mm, skupna višina: 500 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 49 kg, širina transportnega traku: 100 mm, leto zadnje generalne obnove: 2026, Broma stiskalnik za mlečne žemljice Stiskalnik za mlečne žemljice / koščke testa ... kot ročno! Za ročno rokovanje / enosebno upravljanje Nastavljiv pritisk Dolgi izhodni trak Namizna naprava Samo pri nas preizkušeno po DGUV V3 Priklop 400V, vtič 16A-CEE Rabljeni stroj, obnovljen in pregledan s strani SAB Z garancijo + servisom Možnosti: Nwodpfx Ajidp Nmsh Ueg Vzdrževalna pogodba Dostavna storitev Obiščite našo veliko razstavo pekarskih strojev!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low water charging temperatures + Precise dough temperature control all year round + Rapid swelling during mixing without the need for ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible with water mixing and dosing devices + All water-conducting parts are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel refrigeration evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface texture + Low energy consumption SPECIAL accessories, optionally available for an extra charge: - 3-way changeover valves --- for water mixing and dosing units with only two inlets (cold / hot) + €349,-- net Technical data: - Batch size (recommended): up to 70 litres - Continuous capacity*: 230 litres / hour - Peak cooling capacity*: 500 litres / hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 litres / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption per 100 litres: 1.5 - 2.5 kWh Nwodpfsivdv Dsx Ah Ueg * at inlet temperature +17.5°C and outlet temperature +2.5°C

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration during mixing without ice + Smoother doughs due to freshly chilled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-bearing components made of stainless steel, maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless-steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption OPTIONAL special accessories, available at extra cost: - Stainless steel wall bracket (for models L130 + L170): + €499 net - Machine table (for models L130 + L170): + €589 net - 3-way changeover valves --- For water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters per hour - Peak cooling capacity*: 330 liters per hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters per minute - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet Nwedpfxsivdvvs Ah Ueg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid hydration when mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components made of stainless steel, maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration machines + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel cooling evaporators Nwodpsivdu Usfx Ah Ueg + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket in stainless steel (for model L60 + L100): + €319,-- net - Machine table (for model L60): + €399,-- net - 3-way switching valves --- for water mixing and dosing devices with only 2 inlets (cold / hot) + €349,-- net Technical specifications: - Recommended batch size: up to 15 liters - Continuous output*: 50 liters / hr - Peak cooling output*: 90 liters / hr - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New machine with 12 months warranty Advantages of chilled ice water: + consistently low discharge water temperatures + precise dough temperature control all year round + rapid swelling during mixing without the need for ice + improved dough texture thanks to freshly chilled, liquid ice water + accurate dosing possible using water mixing and metering devices + water-bearing components made of stainless steel, maintenance-free + hygienically flawless, clean drinking water Langheinz ice water systems stand out for: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water bath + drain valve in the ice water bath + high flow rates + compact dimensions + easy-to-clean surface structure + low energy consumption Special accessories, optionally available at extra cost: - Stainless steel wall bracket (for models L130 & L170): + €499 net - Machine table (for models L130 & L170): + €589 net - 3-way diverter valves --- for water mixing and metering devices with only 2 inlets (cold / hot) + €349 net Technical Data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling output*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1.189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W Nwjdpsivdvkjfx Ah Ujg - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration when mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible using water mixing and dosing devices + All water-bearing components made from stainless steel and maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Cooling systems with expansion valves + Electronic ice bank controllers + Stainless steel chill evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, available optionally at extra cost: - Wall bracket made from stainless steel (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way switching valves --- for water mixing and dosing devices with only two inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 30 litres - Continuous output*: 60 litres/hr - Peak cooling capacity*: 180 litres/hr - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Electrical connection: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 litres/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption at 100 litres: 1 - 2 kWh Nsdpfx Ahoivdvce Uowg * at +17.5°C inlet and +2.5°C outlet